Download Report

lumenfacade™
SPECIFICATION SHEET
INGROUND
COLOR CHANGING
Client:
Project name: Order #:
Type:
Qty:
FEATURES AND BENEFITS
Physical :
• • • • • • • • • • • • Aluminum optical chamber housing
Anodized aluminum flush trim
Polymer recycled PVC blockout housing
Available in 1’, 2’, 3‘ or 4’ sections
Die cast aluminum end caps
Stainless steel hardware
Tempered glass lens
Asymmetric wallwash, 10° x 10°, 10° x 60°, 30° x 60° or 60° x 60° optics
0°, 2.5°, 5° or 20° factory-set optical aiming options (not available for asym. wallwash)
IP68 rated for up to 1’ (30cm), not suitable for permanent immersion applications
IK10 rated
1000kg max load, walk over only
IK10
Performance :
• • • • • • • 2,041 delivered lumens and 10,415 candelas at nadir (RGB full white, 4’ unit, 10° x 60° optic)
1,977 delivered lumens and 11,646 candelas at nadir (RGBW full white, 4’ unit, 10° x 60° optic)
Color mixing options: RGB (3 channels) or RGBW (4 channels)
Lumen maintenance 80,000 hrs [L70 @ 25°C]
Lumen maintenance 60,000 hrs [L70 @ 50°C]
Resolution per foot or per fixture
Operating temperatures: -40° C to 50° C [-40F to 122F]
Electrical :
• RGB color mixing option:15V DC luminaire, see Power and Control box options on page 7
• RGBW color mixing option:12V DC luminaire, see Power and Control box options on page 7
• Power and data in 1 cable (#16-5)
• IP68 push-lock connectors
• 17.25W/ft
• DMX 512 ready
Width of glass lens
5
2
16 "
[58mm]
TOP VIEW
1
1
1
1
13 16 ", 25 16 ", 37 16 ", 49 16 "
[331mm, 636mm, 941mm, 1245mm]
7
16 "
[113mm]
4
9
5 16 "
[141mm]
FRONT VIEW
*All dimensions are preliminary
SIDE VIEW
5 year warranty
1/7
2015.02.04
EM - R7
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2015 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
1
8
2 "
[215mm]
Optical chamber
SECTION DETAIL
Power supply
housing
lumenfacade™
SPECIFICATION SHEET
INGROUND
COLOR CHANGING
OPTICAL CHAMBER ORIENTATION
Key holes toward the wall side (or target to light).
Frosted section of lens toward the wall side.
Wall side
Street side
0°
Lumenpulse logo always
readable from the street side.
2/7
2015.02.04
EM - R7
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2015 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
lumenfacade™
SPECIFICATION SHEET
ACCESSORIES
Order separately, refer to each item’s specification sheet for ordering information
Control Systems:
LTO2 Lumentouch is a wall mount DMX 512 controller keypad.
LCU Lumencue is a USB / mini SD DMX 512 controller.
LID LumenID is a diagnostic and addressing DMX 512 controller.
It must be specified on all DMX applications.
Refer to LID specification sheet for details.
LTN Lumentone is a simple pre-programmed DMX 512 controller
with a push button rotary dial and live feedback.
Control Boxes:
CBX DMX/RDM control box.
Up to six power and data outputs to fixtures or fixture runs.
Ethernet enabled option.
Refer to CBX specification sheet for details.
Cables (required):
Leader Cable for Lumenfacade Inground;10’, 25’ or 50’ [3m, 7.6m or 15.2m] standard lengths
Jumper Cable for Lumenfacade Inground; 2’, 4’ or 10’ [0.6m, 1.2m or 3m] standard lengths
Inground Junction Box (optional):
Lumenfacade Inground IP68 sealed junction box starter kit - LOI-JBOX order code.
*Use for stand alone fixtures and/or first of run fixtures
3/7
2015.02.04
EM - R7
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2015 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
INGROUND
COLOR CHANGING
lumenfacade™
SPECIFICATION SHEET
INGROUND
COLOR CHANGING
TYPICAL WIRING DIAGRAMS
Typical Installation with Leader Cable
American
Color Code
CE
Color Code
USE
Green
Black
White
Red/Purple
Orange
Yellow/Green
Brown
Blue
Black
Grey
Ground
Live 100-277V
Neutral
0-10V / Data +
0-10V / Data -
Optical chamber
PACBOX
Leader cable
(Order separately)
Jumper cable to next fixture
(For daisy-chain installation)
(Order separately)
TOP VIEW
Blockout
Conduit
(By others)
Typical Installation with IP68 LOI-JBOX Accessory
Cannot be used with 1ft LOI fixture
LOI-JBOX
(Order separately)
Optical chamber
Power & data
input cable
(By others)
PACBOX
TOP VIEW
Blockout
4/7
2015.02.04
EM - R7
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2015 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
Jumper cable to next fixture
(For daisy-chain installation)
(Order separately)
Conduit
(By others)
lumenfacade™
SPECIFICATION SHEET
INGROUND
COLOR CHANGING
TYPICAL WIRING DIAGRAMS - continued
Star Layout (DMX)
Jumper cable
100-277V
Jumper Cable Length
Estimate the center to center distance from
one LOI to the following, and order the
next longest jumper cable available.
CBX-ST
(4 ft LOI shown)
Ex: 10 ft (3m) jumper cable needed for
the example shown.
TOP VIEW
0.5 ft [0.15m]
4.5 ft [1.37m]
Data
input
Lumentouch 2.0
IP68 LOI-JBOX Accessory - Wiring Detail
100-240V
Combined power & data input
100-277V
(From CBX, cable by others)
Cable to
PACBOX
Cap
TOP VIEW
Daisy Chain Layout (DMX)
100-277V
Jumper cable
CBX-DS
Data output
to next CBX
Jumper Cable Length
Estimate the center to center distance from
one LOI to the following, and order the
next longest jumper cable available.
100-277V
CBX-DS
Ex: 10 ft (3m) jumper cable needed for
the example shown.
(4 ft LOI shown)
TOP VIEW
Data
input
0.5 ft [0.15m]
Lumentouch 2.0
4.5 ft [1.37m]
IP68 LOI-JBOX Accessory - Wiring Detail
100-240V
Combined power & data input
100-277V
(From CBX, cable by others)
Cable to
PACBOX
Cap
TOP VIEW
5/7
2015.02.04
EM - R7
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2015 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
lumenfacade™
SPECIFICATION SHEET
INGROUND
COLOR CHANGING
HOW TO ORDER
Select:
Select:
Housing
Voltage
Length
Colors and color
temperatures
Control
Optics
Tilt Setting
Optical
Option
Option
1
2
3
4
5
6
7
8
9
LOI
Select:
Select:
1
Select:
Select:
6
Housing:
Optics:
LOI - Lumenfacade™ Inground
WW - Asymmetric Wall Wash optic
10x10 - 10° x 10°
2
10x60 - 10° x 60°
30x60 - 30° x 60°
Voltage:
60x60 - 60° x 60°
15V - 15 volts DC (RGB)
12V -12 volts DC (RGBW)
7
One PACBOX required per fixture, see page
7 to complete order code with input voltage.
Tilt Setting:
Note: not for asymmetric wallwash
TS0 - 0 degrees
TS2.5 - 2.5 degrees
TS5 - 5 degrees
TS20 - 20 degrees
Factory set. Cannot be adjusted in the field.
3
Length:
12 - 13 1/16 inches (331mm)
24 - 25 1/16 inches (636mm)
36 - 37 1/16 inches (941mm)
48 - 49 1/16 inches (1245mm)
8
Optical Option:
4
INTL - Internal Louver
Colors and Color temperatures:
9
RGB - Additive red, green and blue
RGBW - Additive red, green, blue and white 4000K
Option:
ASL - Anti-slip lens
5
Control:
DMX 1FT - DMX 512, resolution per foot
DMX 1FX - DMX 512, resolution per fixture
6/7
2015.02.04
EM - R7
Select:
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2015 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
Select:
lumenfacade™
SPECIFICATION SHEET
INGROUND
COLOR CHANGING
HOW TO ORDER
INGROUND POWER AND CONTROL BOX (One PACBOX required per fixture)
Select:
PACBOX - WATTAGE
Select:
DMX
Housing
Input Voltage
Output Voltage
Control
1
2
3
4
1
4
Housing:
Control:
(fixture and PACBOX control option must be the same)
The required PACBOX wattage varies with fixture selection.
The correct PACBOX model will be provided based on fixture
configuration.
DMX - DMX 512 ready
2
Input Voltage:
100 - 100 volts
220 - 220 volts
120 - 120 volts
240 - 240 volts
208 - 208 volts
277 - 277 volts
3
Output Voltage:
15V - 15 volts DC (RGB)
12V -12 volts DC (RGBW)
PRE-INSTALLATION BLOCKOUT (One LOI-RBO required per fixture)
LOI-RBO
Select:
GRD
Housing
Length
Installation Type
1
2
3
1
3
Housing:
Installation Type:
LOI-RBO - Lumenfacade Inground Blockout
™
GRD - Ground Recessed
2
Length:
12 - 13 1/16 inches (331mm)
24 - 25 1/16 inches (636mm)
36 - 37 1/16 inches (941mm)
48 - 49 1/16 inches (1245mm)
7/7
2015.02.04
EM - R7
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2015 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.