1. health and fitness
2. disease
3. cold and flu

CLAY & GAME
RELOADERS
Catalogue 27
DECEMBER 2014
Reloading equipment & accessories
Non-Toxic & Lead Shot Components
From .410 to 4 bore
www.claygame.co.uk
[email protected]
Clay & Game Reloaders is a Trading Name of Steel Shot Company Ltd
Unit 18, Redcliff Road, Melton Enterprise Park, Melton, East Yorkshire
HU143RS
Tel: 01482 631066 / 07736936592
Delivery Charges
Standard Delivery - Non Hazardous
Delivery charges (dc or p&p) are priced in two ways, either sent with the Post Office which is stated
next to the item price, or by weight.
Our courier service is next day delivery and we can send up to 20 kilos. Price break down is shown
below ;
Up to 1kg next day tracked delivery £6.00
Up to 5 kg next day tracked delivery £7.50
Up to 10 kg next day tracked delivery £9.00
Up to 20 kg next day tracked delivery £12.50
Hazardous Goods
We are now able to send out hazardous goods with TNT.
The standard charge per consignment is £30.00 for powder or £18.00 for primers and primed cases.
Goods of different hazard classes cannot be sent in the same package.
We can send items with a max of 20 kg Net Explosive Quantity (e.g. 20 kilos of powder).
For further information please call 01482 631066 as we can offer discounted rates when buying
in larger volume.
This is a non guaranteed service, but we can provide you with tracking and consignment numbers on
request. The parcel must be signed for, but if there is no one there at the time of delivery TNT will
leave a card to reorganise.
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Please NOTE the above delivery charges are for England & Wales and Post Code areas EH &
G in Scotland ONLY. Scottish Highlands & Islands, Northern Ireland, Isle of Man, Scilly Isles,
Jersey & Guernsey may vary.
Opening Hours
We are open weekdays 9 am-5 pm and most Saturdays 9 am-12.30 pm.
Customers are encouraged to call before making visits so that we can ensure the required
items are in stock. If you want to visit on a Saturday morning, please call to let us know as we
can be quite busy.
Payment Terms
All prices shown are inclusive of VAT
Orders can be placed over the phone or by email.
Cheques are to be made payable to Steel Shot Co. Ltd
Cheques sent for Clay & Game Reloaders can no longer be accepted
We can no longer accept PayPal as payment for reloading components.
CLAY&GAME RELOADERS
Unit 18, Redcliff Road, Melton Enterprise Park, Melton, East Yorkshire, HU14 3RS (Sat Nav
postcode HU14 3HH)
Tel: 01482 631066 Mobile: 07736 936592
e-mail: [email protected] Website: www.claygame.co.uk
Clay & Game Reloaders is a trading name of Steel Shot Company Ltd.
MEC Reloading Machines
The WORLDS No.1 Shotshell Reloader
Clay and Game Reloaders are the official UK importers for Mayville Engineering Company. We can supply
the full MEC range of presses, accessories and parts (also for discontinued models). Listed in this catalogue
are our most popular MEC products, but if you can’t find what you are looking for then just give us a call.
MEC 600Jr.Mk.5
MEC 600Jr. Mark 5
This is the most popular shotshell reloading machine in the world. Simple and quick
to use, it is capable of reloading 5 to 6 boxes an hour by a novice or experienced
reloader. It includes many popular features found on the more expensive machines,
like the self aligning spindex crimp starter head. Cases from 2½" to 3½" magnum can
be loaded, but will depend upon the gauge used. Machines are available in gauges
from .410 to 10 gauge, and they can be converted to any gauge from .410 to 10ga.
An auto-primer feeder can also be fitted as an optional extra, but not on .410.
MEC 600Jr. Mark 5 3 1/2” steel shot converted.
MEC of America have made exclusively for Clay & Game Reloaders their 600Jr/Mk5
in 3½” in 10 or 12ga with a Steel Shot Bar for 1½oz and 3 powder bushings. This
saves having to buy and fit a 3½” shot conversion kit & Steel shot bar, to a standard
600/Mk5. A 9165 MEC/CGR Euro conversion kit is also available to load 2¾” & 3” in
12ga and 2-7/8” in 10ga cases without having to change the reloader settings
8447
8447
8447
8447
600Jr.Mk.5 12ga, 16ga, 20ga, 28ga, .410
600Jr.Mk5-350 12ga 3½” Steel Shot converted
600Jr.Mk.5-350 10ga 3½” Steel shot converted
600Jr.Mk5-350EU 12ga for 2¾” to 3½” Steel Shot
£170.00
£230.00
£230.00
£251.60
MEC Sizemaster/Steelmaster
MEC Sizemaster is the supreme MEC single stage reloading machines. It's attribute
is the highly accurate "Power Ring" collet resizer, which returns every case back to
the factory specification. It also has the MEC automatic primer feed system (Not in
.410) fitted as standard so there is no need to handle individual primers. The machine
comes adjustable for 3’’ cartridges.
MEC Steelmaster is the steel version of the Sizemaster. The machine is specifically
designed to load steel cartridges, but works equally well with other non toxic shot as
well as lead. The Steelmaster is available in 3 ½’’ and can then be set up to load 2
¾’’ and 3’’ with the use of a MEC Short Kit, making this machine not only high quality,
but also extremely versatile. Die sets are available in .410 to 10ga.
Steelmaster 3½”
8120 MEC Sizemaster 3’’ 10ga, 12ga, 16ga, 20ga, 28ga
863912 12ga Steelmaster 3"
863910 10ga Steelmaster 3 ½”
875512 12ga Steelmaster 3½"
£260.00
£281.00
£281.00
£281.00
MEC 9000 - High speed, high volume reloading at its best.
9000GN features an Automatic spring-ram actuated rotating indexing system (AutoDex), finished shell ejection, Power Ring collet resizing, three stage crimping, and
the new lever actuated 200 capacity auto-primer feed tray. The three stage crimp
system gives the best looking finished crimp there is, being almost indistinguishable
from a new crimp. It also features an automatic bar lock device, so that a single
cartridge can be reloaded without causing any spillage.
9000E is the Auto- Electric version of the 9000GN, all that is needed is a push of a
button with no handle to pull down.
They are NOT convertible, and no die sets are made.
MEC 9000E with Auto-Mate
9000E available in 12ga, 16ga, 20ga, 28ga & .410
9000GN available in 12ga, 16ga, 20ga, 28ga & .410
9130 MEC Auto-Mate
2
£959.00
£530.00
£419.00
MEC Reloading Machines
The WORLDS No.1 Shotshell Reloader
MEC 600 Slugger
For 2013 MEC have developed the 600 Slugger which allows the user to load
slugs with a roll turn finish. The machine is self-inclusive so no need for a vice,
drill press, hand drill, or spinners. The MEC 600 Slugger is based on the number
one selling shotgun cartridge reloader in the world the MEC 600 Jr Mark V.
The MEC 600 Slugger folds the plastic into the shell to look like a roll crimp when
the shell is finished with the use of MEC’s special dies. This single stage loader
provides a quick and simple way to reload slugs for practical shotgun or hunting
with the ease of pulling a handle. The 600 Slugger can load between 100 to 125
rounds per hour depending on your recipe.
9213
600 Slugger available in 12ga & 20ga
£299.00
MEC 8567N Grabber
The 8567N Grabber has everything you need for high-speed, efficient operation and
unbeatable precision.
The ten different operations at six stations speedily produce a finished shell with every
stroke of the handle. It has a fully automatic primer feed, as well as auto-cycle charging,
and our exclusive three-stage crimp.
The "Power Ring" resizer gives consistent, accurately sized shells for optimum gun
performance, without interrupting the reloading sequence. The operator simply puts in
the wads and shell casings and removes a loaded shell with each pull of the handle.
8567N Grabber available in .410, 28ga, 20ga, 16ga, 12ga
£410.00
MEC Spares
A full list of spares can be found on the MEC website but here are our most popular...
205
20528
285ML
304G
304W
325CP
326
330
Plastic Drop Tube
Plastic Drop Tube Small Bore
Primer Tray Cover
Rubber Grommet
Brass Washer
Single Stage Primer Ass.
Primer Seating Cup
Primer Seating Spring
£ 1.90
£ 1.90
£ 5.00
£ 0.90
£ 0.90
£15.00
£ 9.90
£ 1.50
453P(ga)
525CA
670B
751E
8067
8300(ga)
8419
Red Wad Guide (old type)
Progressive Primer Ass.
Lock Spring
Pro Check
Progressive Primer Catcher
Black Wad Guide
Ball Pivot Pin
For anything you can’t find in the catalogue, please call our office on 01482631066 or email
[email protected]
3
£ 4.50
£16.50
£ 1.60
£ 9.90
£ 3.90
£ 4.50
£ 3.90
ACCESSORIES
MEC Conversion Die Sets
Available from .410 to 10ga to fit all Marks of 600Jr, Versamec 700, Sizemaster 77 & SM82.
8452 MEC 600Jr/Mk5 Die sets .410 to 12ga
845210 600Jr.Mk5 Die set in 10ga
8335 Early 600Jr. .410 to 12ga Die sets
8337 Sizemaster .410 to 12ga Die sets
£69.00
£90.00
£130.00 each or 10ga £160.00
£120.00 each or 10ga £129.00
p&p for each set £6.00
MEC Large Capacity 200+ Primer Feed Tray
MEC large capacity progressive primer feed tray holds 200+ primers. Tray pivots for
easy filling and has a self lubricating plastic tray. Fits all progressive reloading machines,
650, 8567 Grabber, 9000G & 9000 E Grabbers.
983 Large Capacity Primer Tray £49.50 p&p £6.00
MEC EZ-PRIME
Automatic primer feed system eliminates fiddling with primers. It only drops a primer when a
case is situated at the final crimp station. Made for the 600Jr., Versamec & 600Jr. Mark V
series in all gauges except .410.
EZ-PRIME "V" for 600Jr.
£45.00
EZ-PRIME “S” for 650
£45.00
MEC Steel Shot Conversion Kit
MEC Steel Shot conversion kits includes Steel shot bottle, Steel rammer tube,
and steel shot drop tube. It requires a Steel shot charge bar and powder bushing
to suit the steel shot loading formula.
8433 Steel shot conversion kit for 600Jr,Sizemaster, Versamec 700
8581 for all Progressive reloaders
8764 3½“ Conversion kits for 600Jr/5
8761 3½” Conversion kits for Size-master 77 & 82
£27.00
£42.00
£48.00
£69.00
MEC Short Kits
MEC Short Kits are to enable you to reload 12 & 20ga 2½” cases on the 2¾” length setting #8849 or,
2¾” & 3” on a 12ga 3½” reloader only #9165. Adapter plates are the only way to reload the shorter PT
cases with only minor alterations to the crimp settings. Made to fit MEC 600Jr, Sizemaster MS82 or 77
models, and Steelmaster machines in 12ga only. Very quick and easy to fit. #8972 will load short 2-7/8
or 3” cases on a 3½ 10ga setting and #9140 will load 2½” on a 3” or 2” on a 2½” setting in .410ga.
8849 12/20ga 2½” kit for 2¾” reloaders £30.00
9165 12ga ONLY 2¾” & 3” kit 600/Mk5-350 3½” £30.00
8972 10ga 2-7/8” kit on 3½” setting £30.00
9140 .410 2½” on 3” or 2” on 2½” setting £30.00
MEC Powder Bushings
MEC have 56 Powder Bushings that fit
into their fixed shot bars for both Lead &
Steel shot.
£4.50 each p&p £1.50
MEC EZ-Fill Funnel
MEC EZ-Fill Funnel saves any spill-age with both powder or shot.
Itfits securely over the shot or powder bottle with no need to hold it
while pouring. It is the perfect answer to a simple problem.
MEC EZ-Fill Funnel £9.00
4
ACCESSORIES
MEC Super Sizer
MEC Super Sizer is the best case re-sizer known. Using an 8 finger "Power Ring"
collet to give an even pressure encircling the metal head, forming it back to the makers
original size. Available in all gauges from 10 to .410 in head heights up to 22mm.
Super Sizer £99.00 all gauges .410 to 10ga
MEC Bottle Support
MEC Bottle Support is designed for use with both Single Stage and Progressive
machines. The heavy duty support hold the bottles steady while being tipped
backwards to change a bar or bushing, also when removing them from the reloader.
Replacement shot and powder containers are available for all machines. Small Yellow containers are for Steel shot and both large and small in Red are for Lead shot.
8938 Bottle Support for Progressive Loaders £31.50
8939 Bottle Support for Single Stage
£31.50
Column Lock Kit
CGR devised Column Locking kit to fit MEC 600Jr, & 700 Versamec reloaders ONLY.
It keeps the column perfectly upright when used with 3½” cases in 10 & 12 gauges and
3” .410, 20, & 12 ga. Made in three parts it is very easy to fit and stops the column
canting over under crimping pressures.
ACCS38
£8.40
MEC Jig Fixture
MEC Jig Fixture securely holds and is adjustable for all MEC reloaders. It can be
mounted on a bench, board, or free standing. Fits all models. 600Jr, 650, 700,
Sizemaster, Steelmaster, 9000 Grabbers.
£40.50
Jig Fixture
Metal Crimp Heads
Metal crimp starter cutting in heads. These are mainly used for cutting in new
cases and do not index on once fired cases. Designed to fit and replace MEC
reloading machines spindex system in gauges .410 to 10ga in both 6 and 8 point
formats.
CGR6PT Metal Crimp Head 20ga to .410ga or 10ga to 16ga
£36.00
MEC Ez-Pak
MEC EZ-PAK neatly stacks the entire 25 loaded cartridges for fitting directly into
an empty box. An empty box is slipped over the EZ-Pak, it is then inverted and
withdrawn leaving the shells inside the box, its that simple!
EZ-PAK Assembler in .410, 20, 12ga.
£14.40
MEC Maintenance Kit
The perfect tools to keep your MEC Reloader running smoothly and effciently. Includes;
Anti-Seize Lubricant, Pick, Brush, Column Spring Lifter, and Closure Nut Wrench.
Maintenance Kit
£16.50
MEC Dust Cover
Keeps MEC Reloaders clean and dust-free. Fits Grabber, Sizemaster, and
9000 series equipped with 12" shot bottle. Durable canvas construction;
color-fast, machine washable. 2-1/2' x 1-7/8'
MEC Dust Cover
£22.50
5
ACCESSORIES
MEC Bushing Rack
Holds 10 Powder bushings. Constructed of metal attachable to a wall or free
standing.
Powder Bushing Rack £10.50
MEC Shot/Powder Bottles
Shot bottles available if you need extra or want to replace your old ones. Bottles
include plugs and caps.
Small Red Shot/Powder Bottle
Small Yellow Steel Shot Bottle
Large Red Shot/Powder Bottle
£8.40
£8.40
£12.90
MEC Shell Checker
Now you can easily measure the precision of your reloaded shells. Precision machined holes,
labeled GO and NO GO test for size and roundness. Durable stainless steel. 10, 12, 16, 20,
and 28 gauge, plus .410 bore.
Shell Checker
£18.00
MEC Charge Bars
MEC charge bar to be used with progressive and single stage loaders for lead
or steel shot.
302 Lead Single Stage Charge Bars
502 Lead Progressive Charge Bars
302 Steel Single Stage Charge Bars
502 Steel Progressive Charge Bars
£18.00
£18.00
£22.50
£22.50
MEC Hats
Enhance the loading experience with your own MEC hat!
Advantage Max-4 Cammo Cap £10.50
Black/White Mesh Cap £10.50
MEC 50th Anniversary Pewter Collector Pin
Whether you're a collector or just like wearing pins showing support for the products
you use, this handsome pin will be a great addition. Available while supply lasts.
MEC Pewter Pin
£4.50
MEC Patch
The name MEC means quality. Display it on your favorite shooting gear, from hats to
jackets. Red MEC logo on white twill background.
MEC Patch
6
£6.00
CGR - More Tools for the Reloader
Multi-Scale Universal Charge Bars
Fit all MEC reloading machines. The current models have fully adjustable
micrometer type settings for powder and shot, together with new anti-shear
inserts for loading Lead, Bismuth, Steel, and Tungsten Polymer shot. Made in
two models C/CS for the MEC single stage reloader's and D/DS for all the
MEC progressive machines.
UNICCS Universal charge bar C/CS inc. Powder Baffle £48.00
UNIDDS Universal charge bar D/DS inc. Powder Baffle £51.00
European Powders bar setting chart also available
New Type Multi-Scale Powder Baffle
This makes the metering of the powder more accurate. Its spring loaded powder trap
is designed to keep pressure on the grommet and washer seal to reduce migration
caused by the bar movement.
POWBAFF MEC fitting only, £12.90
Multi-Scale Shuttle Bar
This is ideal when reloading small bore cases like .410 and 28 gauge. The
advantage of using a standard bushing with small bores is that the powder
drop is always centred over the drop tube. Because shot drops are more
critical with small bores, the adjustable shot measure always gives the correct
weight of shot regardless to the shot diameter.
SHUTTCCS Shuttle Bar £42.00
New Type CGR Scales
A good pair of scales is an essential tool for the reloader. Accurate to 0.01, these
scales allow the user to measure in grains and grams, ideal for checking your powder drop or weighing out shot.
Scales £22.50
CGR MEC to PW Powder Bushing Adapter
Allows the use of MEC powder bushings on a Ponsness Warren reloader.
Powder Bush Adapter £9.00
The Mag Rack
Magnetically attachable to many metal surface the Mag Rack is ideal as an extra
support in a gun cabinet to stop your guns from falling over when at a shoot. It can also be used for fishing rod support or even golf clubs, etc.
£4.50 or £7.50 for 2
New plain white cartridge boxes.
10ga boxes hold 25 loaded 3½” cartridges and the 12ga 2¾” holds 25 crimped cases,
and the 12ga 3½” holds 5 cases with RTO or crimp closure.
BOX1086 10 Pack 10ga 3½” Empty Cartridge boxes £7.50
BOX1286 10 Pack 12ga 3½” Empty Cartridge boxes £7.50
BOX1276 10 Pack 12ga 3” Empty Cartridge boxes £7.50
BOX1270 10 Pack 12ga 2¾” Empty Cartridge boxes £7.50
Power Skiver
CGR/BPI Power Skiver made from tough aircraft aluminium to fit a drill chuck. Takes
only a second to thin a case mouth for crimping.
SKIVE20410 20 - .410ga £28.50
Spin Doctor
Mylar Wraps
For reconditioning the case mouth if
the crimp has not full opened or needs
re-shaping.
SPINDOC available in small or big bore
Used as an extra layer of protection
when using steel or power shot.
Place inside shotcup of the wad.
£25.50
MYWRAP available thick or thin
7
£6.00
NEW CASES
CODE
CASE
HEAD
CASE8WINOF 8ga Once Fired Winchester
PRIMER
Un-primed
PRICE
£18/ 50
COLOURS
Red
Clear
CASE10CH86
10ga Cheddite 3 1/2"
20mm
CX2000
£39 / 100
CASE10RM86
10ga Remington 3 1/2"
20mm
Un-primed
Out of stock Out of stock
CASE12CH50
12ga Cheddite 50mm
12mm
CX2000
£12 / 100
CASE12CH65
CASE12CH65
CASE12CH69
12ga Cheddite 65mm Plastic
12ga Cheddite 65mm Paper
12ga Cheddite 69mm
CX2000
£12 / 100
CX2000
£12 / 100
CX2000/D8 £10.20 / 100
Un-primed
CASE12CH69
12ga Cheddite 69mm
8mm
16mm
12mm
16mm
20mm
8mm
CASE12CH69
12ga Cheddite 69mm
12mm
CX2000
£9.00 / 100
£21.00 / 250
£10.20
Clear
CASE12WN69 12ga Once Fired Winchester
AA 69mm Cases (8pt crimp)
CASE12CH76 12ga Cheddite 76mm / 3"
8mm
Un-primed
£15 / 100
Red
16mnn
CX2000
£12 / 100
Gold
CASE12CH76
12ga Cheddite 76mm / 3"
16mnn
Un-primed
£12 / 100
Red
CASE12BP76
20mm
FIO616
£12 / 100
Black
CASE12FE76
CASE12CH86
CASE12CH86
CASE16CH69
CASE20CH69
12ga B&P Gordon System
76mm / 3"
12ga Federal Once Fired 3"
12ga Cheddite 86mm / 3 1/2"
12ga Cheddite 86mm / 3 1/2"
16ga Cheddite 69mm
20ga Cheddite 69mm
Un-primed
16mm
Un-primed
16mm
CX2000
8mm
CX2000
8/16mm CX2000
£9 / 100
£13.50 / 100
£13.50 / 100
£12 / 100
£12 / 100
Dark Red
Green
Red
Trans Blue
Yellow
CASE20CH69
CASE20CH76
20ga Cheddite 69mm
20ga Cheddite 76mm/3''
8/16mm Un-primed
16mm
CX2000
£12 / 100
Yellow
£13.50 / 100 Clear
CASE24CH65
24ga Cheddite 65mm
7mm
CX1000
£14.40 100
Red
CASE28CH65
CASE28CH69
28ga Cheddite 65mm
28ga Cheddite 69mm
8mm
16mm
CX2000
Un-primed
£12 / 100
£12 / 100
Red
Red
CASE28CH69
CASE32FI63
28ga Cheddite 69mm
32ga Fiocchi 63.5mm
8mm
7mm
CX50
FIO615
£12 / 100
Red
£14.40 /100 Red
CASE410CH50 .410 Cheddite 50mm
8mm
Un-primed
£12 / 100
Red
CASE410CH65 .410 Cheddite 65mm
CASE410CH65 .410 Cheddite 65mm
16mm
8mm
CX1000
CX50
£12 / 100
£12 / 100
Red
Red
CASE410CH76 .410 Cheddite 76mm
CASE410CH76 .410 Cheddite 76mm
16mm
16mm
CX50
Un-primed
£15 / 100
£15 /100
Red
Red
CASEBULK101 10ga Cheddite 3 1/2" Case
20mm
CX2000
£170 / 500
Red
8
CX2000
Green
Red
Blue
Red
Blue
Black
Green
CGR RTO Heads
CGR Roll Turn Over heads are designed to fit stand drill 3/8" chucks. To
prevent them overheating they should not be turned at speeds greater than
200 rpm. Available in all gauges from .410 to 8ga complete with a case holder
with shanks. Each rolling head is tested before dispatch to ensure they give a
professional finish.
RTO410 .410 Roll Turn Over tool £45.00
RTO32
32ga Roll Turn Over tool £45.00
RTO28
28ga Roll Turn Over tool £45.00
RTO24
24g
Roll Turn Over tool £45.00
RTO20
20ga Roll Turn Over tool £45.00
RTO16
16ga Roll Turn Over tool £45.00
RTO12
12ga Roll Turn Over tool £45.00
RTO10
10ga Roll Turn Over tool £46.50
RTO8
8ga
Roll Turn Over tool £49.50
All RTO heads plus £3.50
GAEP Tools
GAEP Steel Roll Turn Over Tool
GAEP OTC Roll Turn Over for Paper Cases
£45.00
GAEP OTP Roll Turn Over for Plastic Cases
£45.00
GAEP Steel Master Crimp Finishing Tool
For setting the crimp and tapering reloaded cartridges, the tools give a professional finish to your
crimps.
GAEP 12ga, 16ga, 20ga, 28ga finishing tool available in nos BN1,2,3,4 £45.00
GAEP Case Trimmer
Available in 12ga, 16ga, 20ga, 28ga & .410 Gauge specific, these trimmers
allow different amounts of case to be cut off with use of a screw and nut.
£25.00
Universal Skiver
A high quality tool for thinning the plastic of a new case. With three blades
set as a tapered cone, the tool can be used with cases from .410 to 10ga.
Allows the user to produce higher quality crimps especially in smaller
bores.
£25.00
Ballistic Products Hull Vise
Made in USA and machined from aircraft-grade aluminium, this is a sturdy
tool that holds the cartridge in place with an adjustable quick-release locking
mechanism. The Hull Vise gives you a helping third hand as well as stability.
It allows you to perform detailed loading operations, such as roll crimping,
with ease and precision. The Hull Vise is factory set to load 10ga - 20ga.
Small bore blocks for 24ga- .410 are also available and easy to install.
Hull Vise
£45.00
Hull Vise 24ga - .410 Blocks £15.00
9
Steel Shot & Magnum Wads
CGR 300 3” Steel Shot Wads
Clay&Game Reloaders now have their own 12ga 3” plastic steel shot wads.
Both wads MUST be slit 4 ways down the shot cup length to customise them and make them
safe to use.
WAD12CGR300 CGR300 (76mm 46g Pb/ITM, 32g Fe, 40g Bi, 30g Tin)
£18.00/500
Gualandi LBC Wads
LBC30 LBC24 LBC43 LBC48 LBC53
LBC24, 30, 48, & 53 (Limited Bore Contact) wads. LBC48 & LBC53 wads
are ideal for loading Steel shot up to 4.0 mm, and also ITM, Bismuth and
small Hevi-Shot shot. Being a long wad, consideration must be given to
the bulk element of the propellant to be used. All LBC wads MUST be slit
about of their length before being loaded.
WAD12LBC30
WAD12LBC24
WAD12LBC43
WAD12LBC48
WAD12LBC53
H-12
Super G-14 Super-G
Magnum
LBC30
LBC24
LBC43
LBC48
LBC53
(70mm 50g Pb/ 65mm 30g Pb/20g FE)
(70mm 36g Pb, 24g Fe, 36g P/Shot )
(70mm 46g Pb. 32g Fe, 45g P/Shot)
(76mm 53g Pb, 35g Fe, 49g P/Shot. 46g ITX)
(76mm 40g Fe, 49g ITM, 52g P/Shot)
£15.00/250
£24.00/500
£11.40/250
£13.50/250
£18.50/250
Gualandi Magnum Wads
Gualandi’s SUPER-G Magnum, Super G-14, & H-12 mm high density plastic
Wads are designed for use in 70mm PT cases. All shot cups have pre-slit
petals, an oval compression unit and can hold up to 42 grams of Lead shot.
The Magnum can also hold 28g of Steel shot up to a maximum Ø of 3.5 mm.
It can also be used with ITM, ITX, or Tin shot. Super G-14 can only be used
with Lead or compressible types of shot..
WAD12GUAH12 Gualandi H-12 (70mm 36-42g Pb)
£13.50/500
WAD12SG14
WAD12SGMAG
Super G-14 (70mm 40g Pb)
£13.50/500
G-Magnum (70mm 40g Pb, 40g ITM, 28g Fe) £16.50/500
Propulsion Technologies Wads (Vagner)
Propulsion Technologies, formally Vagner, wads are once again available to purchase from
Clay & Game. All wads are pre-slit 4 ways and joined by weak break-free’s to make loading
with them easy. The maximum steel shot size recommended for these wads is 3.5mm Ø.
VP 65
VP 60
WAD12PT1219S
WAD12PT1224S
WAD12PT1228S
WAD12PT1232S
WAD16PT1626S
WAD20PT2021S
WAD20PT2024S
WAD20PT2028S
WAD28PT2819L
12ga
12ga
12ga
12ga
16ga
20ga
20ga
20ga
28ga
PT1219S(formerly
PT1224S(formerly
PT1228S(formerly
PT1232S(formerly
PT1626S(formerly
PT2021S(formerly
PT2024S(formerly
PT2028S(formerly
PT2819L(formerly
VP51)
VP50)
VP60)
VP65)
VP80)
VP90)
VP91)
VP92)
VP95)
(19g
(24g
(28g
(32g
(26g
(21g
(21g
(28g
(19g
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Lead
Shot)
Shot)
Shot)
Shot)
Shot)
Shot)
Shot)
Shot)
Shot)
£12.00
£12.00
£12.00
£12.00
£12.00
£12.00
£12.00
£12.00
£12.00
/
/
/
/
/
/
/
/
/
500
500
500
500
500
500
500
500
500
Baschieri & Pellagri Steel Shot Wads
All Baschieri & Pellagri steel shot wads must be slit ¾ of the way down the cup.
WAD20BPS24 20ga Baschieri & Pellagri 24g Steel Wad
WAD12BPS24 12ga Baschieri & Pellagri 24g Steel Wad
WAD12BPS28 12ga Baschieri & Pellagri 28g Steel Wad
WAD12BPS32 12ga Baschieri & Pellagri 32g Steel Wad
WAD12BPS35 12ga Baschieri & Pellagri 35g Steel Wad
WAD12BPS44 12ga Baschieri & Pellagri 44g Steel Wad
£14.00/500
£14.00/500
£14.00/500
£14.00/500
£15.00/500
£13.50/250
Ballistic Products Wads - TPS & Multi-Metal
The TPS & Multi-Metal wads are designed to protect against the ballistic rigors of any tungsten-alloy
and steel shot pellets, yet they are soft and pliable enough to provide highly advanced obturation
(gas sealing). Now available in 28ga and .410
WAD410TPS .410 2 3/4” TPS Wads
(10g Fe, 13g Pb)
£18.00/200
WAD28TPS 28ga 2 3/4” TPS Wads
(16g Fe, 27g Pb)
£11.40/100
WAD12TPS3 12ga 3” TPS
(38g Fe, 55g Pb)
£16.20/100
WAD12TPS35 12ga 3½” TPS
(44g Fe, 64g Pb)
£18.00/100
WAD12MM3 12ga 3” Multi Metal Wads
(38g Fe, 55g Pb)
£16.20/100
WAD12MM35 12ga 3½” Multi Metal Wads
(44g Fe, 64g Pb)
£18.00/100
10
4 - 8 & 10ga Wads
Gualandi 8 Gauge Plastic Wads
CGR/Gualandi 8 bore wads fit the new Winchester, and Fiocchi cases. Made in Italy
their main use is to act as a gas sealing component for the heavy shot loads up to 3oz.
It can also be used as the gas seal for the new CGR Biodegradable 8ga card cup which
can be used for any type of shot currently known. Not recommended for use with black
powder.
WAD8IND 8ga G-ind wads £18.00/250
8 Gauge Bio-degradable Shot Cups - BACK IN STOCK!
Environmental friendly biodegradable card cups are the answer for those restricted to
shooting over a farmers land that respects ecological requirements. Card cups need a gas
sealing component under them, in the form of an over-powder card. A felt wad or fibre wad
can be placed between the card and card cup. Card cups are available for Steel, POWER
SHOT, ITM, ITX, or Lead shot in 8 gauge. 8ga have an average Ø 0.836” and are
available in 38mm & 55mm length.
WAD8CUP CGR Card Cups £8.10/50
CGR 8 & 10 Gauge Waxed Capped Cork
CGR 8ga & 10ga 16mm Wax edge capped cork wads. The wax edge gives a good gas
seal and has been demonstrated to reduce pressures for any given velocity. They are
capped withpaper making them bio-degradable and environmental friendly.
WAD8CRK16
WAD10CRK16
£13.50/250
£13.50 / 250
CGR 4 Bore, 5 Bore & 6 Bore 1/2’’
Compressible Fibre Wads
10ga & 8ga 1/2’’ Compressible Fibre
Wads - Ideal for muzzle loading.
Sometimes available pre-lubed
WADFIB12 £18.00/500
WAD4FELT1 £12.00/250
Multi-Metal & TPS Wads
CGR/BPI Multi-Metal & TPS Wads for 10ga will hold all forms of non-toxic shot currently
available. Now pre-slit with taper shot cup and parabolic powder cup.
WAD10MM 10ga Multi Metal Wad (46g Fe, 67g Pb)
WAD10TPS 10ga TPS Wad (46g Fe, 67g Pb)
£18.00/100
£18.00/100
CGR 10 Gauge Bio-Degradable Shot Cups - BACK IN STOCK
Like the CGR 8ga environment friendly biodegradable card cup, the 10ga version is
designed on the same principal. To protect a gun barrel from any abrasion caused by hard
types of modern none-toxic shot. Being a shot carrier only it needs a gas sealing system
under it to make it perform in the manner it is intended. For a full environment
consideration it can be used with a nitro card and fibre wad under the cup, or it can be
used with a plastic gas seal and column height adjustment felts. Types of shot and
weights that can be used in Bio Card Cup are 60 grams ITM, 62 POWER SHOT, 44g Tin,
and 47g 4mm Steel shot. All need slitting almost to the bottom 4 ways before use. Ø is
0.795”/19.28mm available in 38 mm & 55mm length.
WAD10CUP 10ga Card Cup
£8.10 / 50
10ga US Plastic Wads
10ga Remington SP10 1 5/8oz to 2 1/4oz Lead Shot. Can be used in 10ga 2 7/8’’ or 3
WAD10SP10
£22.50 / 250
1/2’’.
10ga Precision Reloading Brown TUPRW105 suitable for all shot types including steel
WAD10TURPW
£16.50 / 100
shot. Made from very stiff plastic
For 10ga lead loads from 1 1/2oz to 2 1/2oz Designed for magnum 1010ga BPD10
gauge payloads, the slightly tapered shot cup focuses long-range patterns.
WAD10BPD
£21.50 / 100
11
CLAY TARGET WADS
16 Gauge Gualandi Wads
Most plastic wads available for 16ga are designed to hold 24g to 28g of lead shot and, are for use
in 70mm PT cases. 16ga Steel Shot Wads are also available, see pg 7.
WAD16SG18
WAD16SG21
Super G H-18
Super G H-21
28g Lead
24g Lead
£13.50/500
£13.50/500
20 Gauge Gualandi Wads
Most plastic wads available for 20 gauge are designed to hold 24g to 30g of lead shot and, are for
use in 70mm PT cases. The S-G 25 has a gas disperser in the powder cup.
WAD20SG25
WAD20SG21
WAD20SG15
WAD20SCAT
H25
H21
H15
Scatter
24g Lead
24g Lead
28g Lead
24g Lead
£13.50/500
£12.90/500
£12.90/500
£10.00/500
12 Gauge Gualandi V-Zero 25 & 23. Both wads are a complex high quality design. Both have "V"
raked walls and double "0" self adjusting compression unit helps reduce felt recoil to a minimum. V-0
25 has a multi-pin gas dispersing cup, it keeps the wad on top of the propellant letting the expanding
gases maintain a radial sealing pressure on the powder cup walls. To prevent gas leakage the both
V-0 wads have a secondary seal at the base of the shot cup just incase of any damage caused to
the first one in the loading process. This makes sure you have consist and hard hitting close
Pattern.
WAD12V025 V-0 25 28g Lead £12.00/500
WAD12V023 V-0 23 32g Lead
£12.00/500
12 Gauge Gualandi SPARK or REX wads are made to hold only 24 grams of Lead shot in a 70
mm PT case and are the ideal wad for the reloader. They features a deep powder cup, strong
compression unit to help stop dipped e-crimps with light loads, and they also have a double gas
seal system. These special features lend themselves to high velocities and consistent shot to shot
ballistics. They can also be used with modern medium volume powders without loss of column
Height.
WAD12SPK / Spark WAD12REX27 / Rex Wads
24g Lead
£12.00/500
Gualandi SUPER-G SPREADER wads have been made to give consistent open patterns at
relatively close range. This is useful when hunting in woods or for first shots from a single barrel
auto or pump gun. It is recommended for maximum effectiveness not to use shot sizes larger then
2.4 mm, also to avoid crushing the centre spreader rod when loading and closing your case. For the
greatest breadth of spread it is better to use a roll turnover closure instead of a star crimp.
WAD12SCAT32
WAD12SCAT28
12ga Scatter
12ga Scatter
32g Lead
28g Lead
£7.50/250
£7.50/250
B&P 12ga Plastic Wads
B&P [Baschieri & Pellagri of Italy] are made from the finest quality of plastic having a controlled 4 post
compression unit between the powder and shot cups and an axial gas sealing powder cup giving good gas
pressure retention.
WAD20BPZ19
WAD12BPZ15
WAD12BPZ18
WAD12BPZ21
WAD12BPZ24
20ga
12ga
12ga
12ga
12ga
Z-19
Z-15
Z-18
Z-21
Z-24
28g Lead
40g Lead
36g Lead
32g Lead
28g Lead
£12.50/500
£15.00/500
£14.40/500
£12.50/500
£12.50/500
BULK Pricing £95.00 box of 5000
CGR 12ga Clay Wads
The CGR new Economy price wad is the H12, this wad will allow you to load 28g -30g.
WAD12H12
Bulk pricing also available....
CGR H-12
£16.50/1000
£30.00/2000, £63.00/5000
US Clay Wads
MEC100T4 12GA 1OZ Tapered 4 Pedal Wad. Replacement for both WAASL12
& CB1100-12. Can be used for loading slug. Ideally to be used in a Winchester AA HS Case for best
results.
£15.00 / 500
WAD20WINW
20ga Winchester WAA20 White
21/24g Lead
£14.40/250
WAD28WINR
28ga Winchester WAAHS Red
21g Lead
£12.00/250
WAD410WINHS
.410 Winchester WAAHA410 HS Red 14g Lead
£16.50/250
12
Degradable Wads and Fillers
Fibre wads are made from a man-made fibrous material impregnated with a mix of bitumen and paraffin
wax. Most are capped top and bottom with a thin paper cover. This helps prevent shot from becoming
embedded in the fibre while under acceleration forces.
WAD12FIB13
WAD12FIB16
WAD12FIB18
WAD12FIB21
WAD16FIB13
WAD16FIB20
WAD20FIB16
WAD20FIB14
WAD28FIB12
12ga 13mm Capped Fibre
12ga 16mm Capped Fibre
12ga 18mm Capped Fibre
12ga 21mm Capped Fibre
16ga 13mm Capped Fibre
16ga 20mm Capped Fibre
20ga 16mm Capped Fibre
20ga 14mm Capped Fibre
28ga 12mm Capped Fibre
£13.50/500
£13.50/500
£13.50/500
£12.60/500
£13.50/500
£13.50/500
£13.50/500
£13.50/500
£18.00/1000
NEW Fibre Shot Cups
Now available in 12ga for the first time. The fibre shotcups can be used
with steel shot to solve the issue of using steel on land where it is fibre
wad only. Shotcups can also be used with lead to improve patterns for
fibre loads. They are available for 2 3/4’’, 3’’ & 3 1/2’’. New loading data
is now available on request.
Wads must be slit 4 ways before loading. Please call for more info.
WAD12CUP() 100 Fibre Shot Cups 34mm, 38mm, 55mm
£13.50
Capped Cork Fillers
Cork fillers can be placed on top of a hard fibre wad under the shot to give a cushioning
effect. This helps improve shot patterns and increase column heights for a good crimp.
CORK4104
CORK284
CORK203
CORK164
CORK121
CORK12()
.410
28ga
20ga
16ga
12ga
12ga
4mm Capped Cork
4mm Capped Cork
3mm Capped Cork
4mm Capped Cork
1mm Plain Cork
2mm, 3mm, 4mm Capped Cork
£10.50/500
£10.50/500
£10.50/500
£10.50/500
£10.50/1000
£10.50/500
Nitro Over Powder Cards
Nitro over-powder cards give a more consistent cartridge when used with capped fibre wads.
CARD8BP
CARD10BP
CARD12()
CARD163
CARD203
CARD283
CARD4103
8ga
10ga
12ga
16ga
20ga
28ga
.410
3mm Nitro Cards
3mm Nitro Cards
3mm, 4mm Waxed Nitro Cards
3mm Waxed Nitro Cards
3mm Waxed Nitro Cards
3mm Nitro Cards
3mm Nitro Cards
£9.00/250
£9.00/250
£9.00/500
£9.00/500
£9.00/500
£12.00/500
£12.00/500
Over-shot Cards
Gualandi thick over shot cards, made from thick card board.
DISC81
DISC8
DISC101
DISC102
DISC(ga)
8ga O/S cards Plain
8ga O/S cards BB/1/3
10ga O/S cards Plain
10ga O/S cards BB/1/3
12ga,16ga, 20ga, 28ga, .410 O/S cards Plain
£15.00/500
£7.50/250
£15.00/500
£ 7.50/250
£11.40/1000
Transparent frangible overshot disks
Designed for use with large shot sizes, and RTO closures, so that they fragment
on leaving the barrel.
DISC12FRANG 12ga £11.40/1000
FELT128
FELT208
12ga 1/8’’ Felt Cushion Filler
20ga 1/8’’ Felt Cushion Filler
13
£9.00/250
£9.00/250
Small Bore & Gas Seals
Gas Seals
Gas Seals or Obturator discs' give a gas sealing property similar to a plastic wad
powder cup. Designed primarily to be used under felt or fibre wads to make them
more ballistically efficient. They are made in 2 forms, white for plastic cases, and
green for paper cases. Available in 10ga 7 mm thick, 12ga 5 mm & 6.5 mm thick,
and 20ga 5 mm thick only. In certain applications obturators can be used under
some plastic wads to increase the column height, particularly with steel shot wads.
GAS107
GAS1265
GAS1265GR
GAS201
10ga
12ga
12ga
20ga
Gas
Gas
Gas
Gas
seals
seals
seals(green)
seals
£12.00/500
£12.00/500
£22.50/1000
£ 8.00/500
Stackable Gas Seals
GS2 & Stackable gas seals are ideal for adjusting the the wad column height when
loading steel shot or when using a long case with a light load. Stackable’s fit into
the powder cup of a plastic wad, and the GS2’s fit under the powder cup, both
maintain maximum velocity for any given shot load.
GAS124 Stackable Gas seals £15.00/250
GASGS2 GS2 Gas seals
£12.00/250
H30 H37B H38A H41
28 Gauge Wads
For the 28 gauge reloader we have four types of plastic wad for the 70 mm case
and one fibre type. G-H38A will hold 17/18 grams of Lead shot, H37B. 22/24g, H41.
27/28g. G reen in colour with a secondary gas sealing ring around the
base of the shot cup to help prevent leakage just in case the powder cup was
damaged in loading.
WAD28H38A
WAD28H30
WAD28H37B
WAD28H41
28ga
28ga
28ga
28ga
H38A
H30
H37B
H41
WAD28FIBCF 28g 1/2’’ Circle Fly Fibre Wads
WAD28CRK15 28g 15mm
Waxed Cork Wads
WAD28FIB12 28ga 12mm Capped Fibre Wads
£12.00/500
£12.00/500
£12.30/500
£13.50/500
£15.00/500
£15.00/500
£18.00/1000
Gualandi 32 Gauge & 24 Gauge
Gualandi 32ga H37 and 24ga H38 wads are stocked in small quantities due to their limited
demand. The 32ga wad is reversible having an open powder cup shot cup arrangement, and
the 24ga has a single ended Mini-Container. Both are made to fit 65 mm PT cases and have
compression columns for flexibility of shot loads. They also include a secondary central gas
Seal.
24ga
WAD32MINI
WAD24H38
32ga
32ga H37 G-Mini Container £10.50/250
24ga H38 G-Mini Container £15.00/500
Three types of .410 plastic wads are currently available and one wax coated cork.
The Gualandi Micro H17 holding 19 grams of lead shot in a 76 mm PT case. Two
Mini-Container H27 holds 14g in a 65 mm case and H33 14g in 76mm, and the H40
with full length petals 16 gram in the 76 mm PT cases. Full length petals are to help
reduce leading of the barrel walls. H40’s are not recommended for guns fitted with a
silencer. The wax coated cork wad is 15 mm in height and capped both ends. It can
be placed directly on the powder, but can also be used with an over-powder card if
Required.
H40
H33
H27
H21
H17
WAD410H21
.410
WAD410H27
.410
WAD410H33
.410
WAD410H17
.410
WAD410H40
.410
WAD410CRK12 .410
WAD410CRK15 .410
14
H-21 Nana
H-27 Mini-Container
H-33 Mini-Container
H-17 Micro
H-40
12mm
Capped Cork Wad
15mm
Capped Cork Wad
£12.60/500
£12.60/500
£12.60/500
£12.60/500
£13.50/500
£13.50/500
£13.50/500
Powders & Primers
Propellants for shot cartridge reloading are in three categories of vivacity. Degressive (fast burning),
Neutral(medium burning), and Progressive (slow burning). They are classified by their make-up as single base,
double base, and modified. Fast burn powders are for light loads up to 28 grams, medium 30 to 36g, and slow up to
50g. Slow powders are also common in all forms of non-toxic shot loads.
New powders such as Alliant 381 are available blended and balanced for use with non-toxic types of shot,
particularly steel shot. These are modified to give low breech pressures and high velocities. Some concern
exists because they don’t burn clean. The reason for this is due to the chemical make up within the powder.
However, the results obtained are astounding and beyond the ability of other types of powder. So forget the
residual burn element and buy a cleaning rod. A clean barrel has never killed anything yet, but an efficient shot
load has.
Never use a fast burning powder with a heavy load, or substitute different shot types in your load. Remember
that resistance contained within a cartridge created by a fast burning propellant behind a heavy shot load, a
tight wad fit and crimp, will make a propellant convert its heat to gas more efficiently. This will cause a high
breech pressure and slow velocity, so never guess at what the burn speed of a powder is, always seek advise.
Below is a general guide to the uses of the powders
listed above. It is not sacrosanct but should be
considered as important before use. Most of the
powders can be used in other gauges, but must be
used to a proofed formula. Be aware that some
advice given by ignorance can be very dangerous.
Powder
Type
Preferred
Gauge
Vectan AS
12 - 70mm
Vectan A1
12 - 70mm
Vectan SP3
.410 - 3"
MAXAM CSB5 12 - 70mm
MAXAM PSB2 12 - 70mm
MAXAM CSB0 10 - 3½"
Alliant Steel 1 0/12 - 3½"
Shot
Type
Max Weight
In grams
Lead
Lead
Lead
Lead
Lead
Steel
Steel
32
40
21
32
42
44
42
Be aware - powders should never be identified on colour/flake
shape. Various powders can look the same but be different
Code
Make
½kg
1kg
POWVA1
POWVAS
POWVAO
POWSP3
Vectan A1
Vectan AS
Vectan AO
Vectan SP3
£20
£20
£25
£32
£39
£39
£50
£64
POWCSB0
POWPSB2
POWCSB5
Maxam CSB0
Maxam PSB2
Maxam CSB5
£24
£23
£21
£46
£45
£40
POWTUB3
POWTUB7
POWTUB8
Tubal 3000
Tubal 7000
Tubal 8000
£45
£45
£45
POWDO73
POWSO71
POWSO40
POWSO35
POWSO30
POWSO15
Lovex DO73.4
Lovex SO71
Lovex SO40
Lovex SO35
Lovex SO30
Lovex SO15
£32.40
£32.40
£32.40
£26.40
£26.40
£26.40 LBS
POWA381
POWABD
POWARD
POWAGD
POWAST
POWA24
Alliant 381
Blue Dot
Red Dot
Green Dot
Alliant Steel
Alliant 2400
£32
POWH110
POWHLST
POWHLGN
Hodgdon H110
Hodgdon Longshot
Hodgdon Lil Gun
£64
£36
£36
£36
£36
£38
£36
£38
£39
Primers
A shotgun primer should match the type of propellant being used. Primers are basically in three
categories, Mild, Medium, or Hot. Generally, mild primers suit double base powders having a high level
of nitroglycerine, medium with most single base neutral powders, and hot are ideal for
progressive powders. This however is a rule of thumb, because as new modified powders become
available, they are more susceptible to pressure change caused by the flash temperature of the primer.
Cheddite Clerinox CX2000
Cheddite Clerinox CX50
BULK: 5000 primers delivered for £180.00
£3.90/100
£3.90/100
NEW Larger G-1000 Primers
£3.90 / 100
£36.00/1000
£36.00/1000
(£36.00 per 1000)
£36.00 / 1000
For those of you that have problems with primers falling out of your cases, the solution is here. A number of
Spanish manufactured cases such as Eley or Dianna use a slightly larger primer than normal. The G-1000 is
suitable for these cases and can be used with CSB5 & PSB2.
15
Shot
NON-TOXIC & Lead
CGR Power Shot
POWER SHOT is exclusive to Clay&Game Reloaders. It is slightly heavier than Hevi-shot® or ITM® and
is about 12.9% heavier then 3% Sb Lead shot. So it gives devastating long range killing power. There are
three shot sizes 3.0mm, 3.5mm & 4.0mm all giving a very high impact levels for their size. Tungsten
based Power Shot works a lot better than Lead, but isn’t cheap, nevertheless its still cheaper than ITM or
Hevi-shot. It is also capable of killing ranges beyond those of most shooter ability to consistently shoot.
Bismuth Shot
Bismuth has very similar characteristics to lead. With ITM becoming more difficult to get hold of,
Bismuth is one of the only alternatives to lead for those with older guns. It has the same penetration
at distance as well as the soft, malleable characteristics as lead.
Steel Shot
We manufacture our own steel shot to the highest standard currently on the market, supplying cartridge
manufacturers around the world. Steel shot is available in a huge range of different sizes, as well as
some sizes coated with either copper or zinc. All the shot is lubricated for ease of loading, and the larger
shot sizes have our own anti-rusting system, giving protection to the shot when out wildfowling.
ITX Shot
Manufactured to a target density of 10.0 grams/cc. Original-10 is hard enough to maintain superior patterning and penetration, yet softer than any barrel steel. Original-10 is ideal for any shooter concerned with
shooting non-toxic through their barrels, including double-gun shooters and small-bore shooters. We would
always recommend using protective wadding due to the shots tungsten element.
Nice Shot
Nice shot is made up from tungsten, tin and iron. The result is a shot that is almost as heavy as lead has a
very similar malleability. It is made to be used as a direct lead replacement. It has a density of 10g/cc so is
slightly lighter than lead but has the same high energy level. Although there is a lot of information about this
shot being safe to shoot through any barrel, our own testing has shown slight marking on the chokes when
used with non protective fibre wadding. We strongly recommend shot to be loaded with either protective
plastic wadding or a fibre shot cup.
Pricing /
Pricing / Kg 3Kg
Pricing /
5 Kg
Pricing /
10Kg
Pricing / 20Kg
Pricing
/H1100kg
Shot Type
Sizes
Lead Shot
9, 8, 5, 4
Lead Shot
7, 7 1/2, 6
Lead Shot
3,2,1,BB,AAA
£25.00
£48.00
Lead Shot
Nickel Plated
4&5
£23.00
£45.00
Steel Shot
9,7,6,5,4,3,
2,1,BB
£12.90
£25.50 £62.50 Inc Del. £270.00 Inc Del
Zinc Coated
Steel Shot
B, T, F
£19.50
£39.00
£19.50
£39.00
Copper Coated B
Steel Shot
Bismuth
5, 4, 3, 2, BB,
US BB
£37.50 £79.50 Inc. Del. £330.00 Inc Del
£30.00
£61.00 /
£71.00 US BB
£177.00
Power Shot
3mm, 3.5mm,
4mm, 4.5mm
£59.00
£172.50
ITX Shot
Nice Shot
4, 2, BB
4,3,2,BB
£50.00
£73.50
£147.50
£210.00
£72.50 Inc. Del.
10Kg p&p £9.00 tracked next day delivery, 20kg - £12.50, call for bulk delivery pricing.
Additional Tools
8Ga Cases Sizing Kit
The Deluxe 8 bore case sizing kit is engineered to a highly accurate
standard and quality. It allows the use of once fired kiln cases by removing
the kink in the brass head. The kit comes in three pieces; double ended
sizing die, anvil tube and mushroom head knockout punch with primer
safety insert tip.
8RESIZE
CGR 8ga Standard Sizing Kit
£60.00
BPI Trim Doctor tool is two tools in one:
A case length trimmer that produces exacting cuts and ideal short cases,
and a case disassembly tool. A threaded adjustment gauge in the Trim
Doctor holds shells in alignment to produce a clean and crimpable edge. The
Trim Doctor is designed to remove 1/4" at a time (about the same as full fold
crimp). Two full cuts on a 10 gauge shell produce a 2-7/8" shell. It
comes with one gauge adaptor bushing.
TRIMDOC BPI Trim Doctor Available in 10ga, 12ga 16ga, 20ga £30.00
Original Buffer - Increases pattern density for lead loads. Buffer 47 - Increases pattern quality for
large shot sizes and steel shot. Mica Wad Slick - ideal medium for lubricating wads and reducing
friction.
BUFFORG
Original Buffer
£12.00
BUFF47
Buffer 47
£12.00
BUFFBSB
Bismuth Buffer
£12.00
MICA
Mica Wad Slick
£12.00
BUFFDIP
Buffer Dipper
£ 3.50
Loading Manuals
Product
Code
BOOKADV
Description
Price
BPI Advantages Manual -A great general knowledge manual listing
many components and loading processes. Includes over 6000 reloading
formulas from 10ga - .410 including lead, steel and ITX with American
Powders
BOOKCHED BPI Cheddite Manual -Background on components and loading
processes. Lists loads from 10ga - .410 using Cheddite cases and
primers with US powders
BOOKSLUG BPI Slug Loading Manual - Information on loading precast slugs such as
the Gualandi Dangerous Game Slug
BOOKST
BPI Status of Steel - In depth information about loading steel shot
EEL
cartridges with US powders
BOOKBIS
BPI Handling Bismuth Manual - In depth information for loading
Bismuth cartridges with US powders. Specifically useful for 10ga
£28.50
BOOKITX
BPI ITX Loading Manual - In depth information for loading ITX
cartridges with US powders.
BPI 16Ga Manual - In depth information for loading 16ga lead and non
toxic cartridges in 2 1/2’’, 2 5/8’’ and 2 3/4’’ with US powders.
£15.00
BPI The Mighty 10ga
£15.00
BOOK16
BOOK10
BOOKBUCK BPI Buckshot Manual
BOOKCOY
BPI Coyote Manual
£15.00
£15.00
£15.00
£13.50
£15.00
14
£13.50
PONSNESS WARREN RELOADERS
DU-O-MATIC 375C
This smoothly operating single stage reloader uses the same style tooling as more expensive
progressive machines, insuring that each shell is given that ‘new-out-of-the-box’ tapered crimp
for which Ponsness Warren are known for. This machine will allow the user to load both lead
and non toxic shot without the need for a conversion kit. Users can add a second tooling set
to the machine to allow another gauge to be loaded. An access plug gives access to bushings
to allow for inspection and changing instantly. Models available for reloading all shell sizes.
DUOM(GA)
DUOM(GA)
DUOM(GA)
DUOM(GA)
DUOM(GA)
.410 2 1/2’’
12ga, 16ga, 20ga, 28ga 2 3/4’’
12ga, 20ga, .410 3”
10ga, 12ga
12/20ga 2 3/4”
£495.00
£495.00
£495.00
£495.00
£594.00
NEW 800 PLUS
The new 800 Plus is equipped with the star gear, index pad, main index gear that gives the
‘click’ when the machine is indexed. The machine features a die-removal cylinder that
allows quick and easy shell removal at virtually any station. The EZ-Fill access hopper will
hold 1lb of powder and 25lbs of shot and has a brass external adjusting primer feed
assembly.
Another great feature of the 800 Plus is the quick changing tooling kits. Since the 800 Plus
does not have a centre shaft, tooling kits are installed in a tool head, allowing you to
convert to another gauge in under 5 minutes.
800PLUS(GA) 12ga, 16ga, 20ga, 28ga, .410
£894.00
L/S-1000
The L/S-1000 is the only fully progressive reloader that loads lead, steel and bismuth shot
without the need for any type of conversion kit. Precise ‘Uni-Drop’ system drops any shot up
to and including BB.
The smooth, quiet index system automatically aligns each shell at every station. With each
cycle of the operating handle, the L/S-1000 automatically indexes, de-primes, final crimps and
ejects a completed shell. Primers are easily filled in the primer feed tray, then freely slide
down the track, into the primer feed assembly. There are not primer tubes to fill and you can
count the remaining primers at any time. The shell holders and primer knockout/resizing
assembly ensure that low or high brass shells are easily resized to factory specification.
The L/S-1000 now comes with the P/W Die Removal System which allows you to easily
remove cartridges from virtually any station on the reloader. This means users can quickly
check shot and powder charges, inspect cartridges or remove damaged cases.
LS100010
LS100012
10ga (for 3 1/2’’) Bushings included X, S15
12ga (2 3/4” & 3”) Bushings included H, L6
Auto-Drive Electric System
The Auto-Drive is easily operated by moving the
forward/reverse control lever. The full pivoting
system allows the arm to work in one continuous
motion. The Auto-Drive comes fully assembled
and mounted on a steel base. Installs on all P/W
progressive cartridge reloading machines.
£798.00
£1074.00
£ 975.00
Automatic Shell Feed System
Mount this system to your machine and cartridge
cases will automatically be placed on the shell
seating post. The shell hopper holds 500 cases
and feeds them brass down on to the shell feeding seating assembly. The motor will automatically stop when the feed tube is full. 12ga only.
£444.00