1. law, govt and politics
2. law enforcement
3. fire department

bu i d
Corporate
Catalogue
Working with
Suppliers to Construction, Fit-out and Rail
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
About Eurotec
Suppliers to the Construction, Fit-out and Rail Industries
INTRODUCTION
Eurotec have been committed suppliers to the fit-out and construction industry for over
20 years. We supply an immense range of products all over the uk on a next day delivery
Basis.
At eurotec we take pride in our ability to provide a range of quality products and services
In an increasingly demanding and competitive marketplace.
We are continually aiming to improve our products and services through ongoing
Investment, research and development.
Our aim is to always provide a ‘total supply solution’ for our customers/. To do this we go
Above and beyond the normal supply service by sourcing any new products required, by
Supplying information and products to help reduce our customers and our environmental
Impact. We also keep up to date with all health and safety requirements so that we can be
One step ahead of legislation and help advise our customers of any new requirements or
Products to suit our customers needs.
Another service that we offer is the supply of site set up packs, these packs will contain
Pre-approved standardised items required to start a site.
All eurotec staff are trained to work with customer satisfaction in mind, this means that
We will always do our upmost to supply our customer what they require when they
Require it.
We provide the following services:
We provide the following products:
Our services consist of but are not limited to the following
Our services consist of but are not limited to the following
Embroidery and heat seal transfers
Digital printing and artwork service
Customer branded brochures
Site visits
Face-fit test and tool box talks
Fire extinguisher servicing
H&s and environmental information
Next day delivery
Protection materials (standard or branded)
Signage (h&s standard and branded)
PPE (standard or branded)
Corporate clothing (standard or branded)
Site equipment and canteen supplies
First aid and fire equipment
Janitorial and general waste products
Tools and fixings
About Eurotec
Suppliers to the Construction, Fit-out and Rail Industries
SERVICE LEVELS - DISTRIBUTION
Uk wide 24/48 hour distribution preferably using own transportation network.
Eurotec depots:
Essex (main office)
York
All of our deliveries will be on a free next
Working day delivery basis where possible.
If there is an occurrence that holds up the
Delivery i.e. Non stock items, the site manager
Will be informed and kept regularly updated
By a member of staff from eurotec.
All of our vehicles have trackers fitted allowing
Us to track their progress throughout their
Scheduled routes.
Delivery methods are listed below:
London (within m25) - own vehicles/next day delivery
Home counties (outside m25) - own vehicles/next day delivery
South west - own vehicles/next day delivery or next day courier
Midlands - own vehicles/next day delivery or next day courier
Northern - own vehicles/next day delivery or next day courier
Scotland - next day courier
Mainland europe - next day courier
Other uk areas not covered above- next day courier
About Eurotec
Suppliers to the Construction, Fit-out and Rail Industries
EUROTEC’S CERTIFICATIONS:
We are proud to have been certified by the british standards institute (bsi) to the iso 9001
Quality standard for over 10 years, to the iso 14001 environmental standard for over 5 years
And more recently certified to both the iso 18001 health & safety standard and the 50001
Energy management standard (replacing 16001 sustainability standard). In fact eurotec are one
Of the first companies that have gained certification to the 50001 standard and one of only a
Handful of companies that have been certified to all four standards.
Being certified to these standards helps us to monitor and measure our service levels and to
Reach the service targets that we have set based on customer requirements.
In addition to bsi, we are also certified by achillies to the link- up, building confidence and the
Uvdb schemes. Plus we are members of various relevant trade associations.
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
9001
FS 37588
14001
Association of
Interior Specialists
EMS 516110
Certification benefits and awareness:
18001
OHS 575806
Sustainable supply chain
Up to date on h & s requirements
Environmental product range
50001
Carbon reduction schemes
ENMS 575804
Coshh and date sheets for products
Focus on customer service
Continual improvement schemes
Policies and targets endorsed by management.
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
bu i d
Reflex White - £4.25
Reflex White c/w Logo & Visor - £7.50
Reflex Green c/w Logo & First Aider - £7.85
Induction Sticker - £0.60
bu i d
Date Signed Project
bu i d
Centurion Reflex hat c/w logo & Visor
(Standard white / Green First Aider)
INDUCTED
bu i d
8 Build Hard Hat
Site Induction Sticker
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
bu i d
High visibility waist coat c/w logo
bu i d
bu i d
bu i d
bu i d
bu i d
bu i d
Class 2 to EN471
Small - XX Large
working with
Fire Warden
£2.25
‘Working with’
Company Logo
50mm
An ‘Extra text’ service is available from
Eurotec. If you wish to have your Site Name,
Client name or any important information
about the person wearing PPE, for
example First aider, Firewarden or Site
Manager. Please contact the Eurotec sales
team for more information.
Back Logo - 140x155mm
L/B Logo - 57.1x60mm
200mm
All extra text to be in ‘Calibri’
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
bu i d
Jacket c/w Logo - £16.50
High visibility jackets c/w logo
bu i d
bu i d
Class 2 to EN471
Small - XX Large
An ‘Extra text’ service is available from
Eurotec. If you wish to have your Site Name,
Client name or any important information
about the person wearing PPE, for
example First aider, Firewarden or Site
Manager. Please contact the Eurotec sales
team for more information.
Back Logo - 140x155mm
L/B Logo - 57.1x60mm
All extra text to be in ‘Calibri’
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
bu i d
T-shirt c/w Logo - £4.00
T-shirt c/w logo
Various colours available
Transfers
Small - XX Large
bu i d
bu i d
bu i d
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
bu i d
Polo c/w Logo - £8.95
Polo-shirt c/w logo
Various colours available
Embroidery
Small - XX Large
bu i d
bu i d
bu i d
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
bu i d
Fleece c/w Logo - £12.50
Fleece c/w logo
Various colours available
Embroidery
Small - XX Large
id
bu i d
bu
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
bu i d
Sweatshirt c/w Logo - £8.50
Sweatshirt c/w logo
Various colours available
Embroidery
Small - XX Large
id
bu i d
bu
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
bu i d
Shirt c/w Logo - £16.50
Short Sleeve Oxford Shirt c/w logo
Various colours available
Embroidery
Small - XX Large
bu i d
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
bu i d
Verno c/w Logo - £18.50
Verno Soft Shell c/w logo
bu i d
bu i d
Black
Transfer
Small - XXXX Large
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
bu i d
Parka c/w Logo - £65.00
Helly Hanson Jacket c/w logo
bu i d
Various colours available
Transfer
Small - XX Large
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
bu i d
Standard Goggles - £1.00
Wraplite - £1.05
EYE & FACE PROTECTION BS En166
Technical Specifications / Requirements
Choosing Safety Eyewear
When choosing the safety eyewear which is best
suited to day-to-day and task specific requirements,
the following information will be useful: the eyewear
should be marked with a standard code (BSEN:166);
each number represents a test which the product
has been subjected to. Every effort must always be
made to remove the hazards identified, at source,
as the result of a Workplace Risk Assessment;
however, where safety eyewear and task specific
eyewear (e.g. goggles) are necessary, the following
items should be considered:
Standard Safety Goggle
Anti-mist safety goggle.
Polycarbonate lens.
Direct vent.
Soft pvc frame.
Fits over most prescription glasses.
Adjustable strap.
EN166 - 4 9 BT
ANSI - Z87
- Type of hazard
- Type of protection
- Type of Lens
Types of Eye Hazard
Hazards fall into 4 main categories:
Mechanical – Flying debris, dust or molten metal.
Chemical – Fumes, gases or liquid splash.
Radiation – Heat (Infrared), Ultraviolet light or glare.
Laser Light – Over a wide spectrum of wavelengths
from Ultraviolet to Infrared.
Type of Protection
Safety Spectacles – Safety spectacles are intended
to protect against low energy impact from flying
debris and objects. They will not keep out
concentrations of dust or airborne particles.
Or protect against gas or molten metal.
Safety Goggles – safety goggles will offer protection
against medium energy impact and high levels of
explosive force. They must be used to protect against
dust, airborne particles and gas
Safety Faceshields – a full face visor offers a wide
area of protection against flying particles and
chemical splash. They also remain mist free through
rapid temperature changes.
Wraplite Spec
Wraparound sports style frame with
adjustable ratcheting side arms to give
an optimum fit. Hard coated
polycarbonate lens, complete with
adjustable neck cord. Conforms to
EN166.1.F.
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Type/Colour of Lenses
Clear - Suitable for general use.
Grey Anti - Glare - Suitable for use in high glare
Situations such as finished concrete slabs in bright
sunlight.
Yellow/Amber – Suitable for persons moving from
light to dark environments.
Care and Maintenance
Both the employee and employer have a
responsibility to keep all eye protection in good order.
User instructions are provided and give cleaning and
maintenance information. The employer should
ensure that products are available to help keep
eyewear in optimum condition.
Association of
Interior Specialists
bu i d
Bandido - £2.50
Silium - £4.95
Bollé Bandido
An economically designed model made
entirely of highly resistant, polycarbonate.
Bandido eye shields have inbuilt side protection
and allow an excellent panoramic view, thereby
guaranteeing a very pleasing price/quality
ratio, with an anti-scratch and anti-fog coating.
Available in:
Tinted
Clear
Smoke
Bollé Silium
The Silium features a sports
style frame with rubber tipped,
self adjusting spring temples
and soft adjustable nose pads.
- Polycarbonate wrap lens
- Anti Scratch
- Anti Mist
- Grade F Impact
- 100% UV Protection
Available in:
Tinted
Smoke
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Clear
An exclusive and revolutionary
HD lens coating for the best in clarity
and light transmission.
The visible light transmission rate is
at 96%, compared with the 92% of
other conventional lenses.
Featuring a hydrophobic coating as
standard, HD is a barrier against
water and dirty marks.
- 96% visible light transmission
significantly improves perception and
clarity.
- Eliminates “surface reflection” whilst
still providing 99.99% UV and
impact protection.
- Greater visual comfort for longer
periods of use.
Association of
Interior Specialists
bu i d
Protective Footwear
Black Safety Shoe Steel Midsole/Toe (CDDSMS)
Dual density PU
200 joule steel toe cap and steel midsole
Shock absorber heel
Anti-slip and anti-static
Sole resistant to oil, acids and alkalis
Leather upper
Conforms to EN345 S1P
Black Safety Boot Steel Midsole/Toe (CF2BL)
Smooth leather 6 inch boot
Dual density PU
200 joule steel toe cap and midsole
Shock absorber heel
Anti-slip and anti-static
Sole resistant to oil, acids and alkalis
Leather upper
Conforms to EN ISO 20345:2004/A:2007 S1P
Black Safety Chukka Boot Steel Midsole/Toe
Genuine leather upper
Sports padded collar & tongue
Steel toe cap and midsole
Textile lining
Lightweight PU/PU outsole
Exceeds EN ISO 20345
Blue Overshoes
A simple, effective solution to hygiene needs
Compressed polyethylene
Elasticated ankle straps
Embossed for grip
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
bu i d
Hand Protection
Skytec Ninja Lite Glove - £1.50
An ultra-lightweight glove with exceptional flexibility
Breathable through front and back
Elasticated wrists
Treated with Actifresh to kill bacteria
Blue and black colouring
Grip gloves (2142)
Polycotton Shell
Latex Coating
General purpose resistant to abrasion
Perfect Palm Fit Glove
A light, elasticated low-lint glove, resistant
to deformation which keeps its shape longer
Protects the hand from oils and abrasion while
remaining elastic and breathable
Designed for easy movement
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
bu i d
Beta (Red) - £1.55 each (pack of 10)
Gamma (Amber) - £4.80 each (pack of 10)
Theta (Green) - £5.95 each (pack of 10)
Hand Protection
Tricolore System
TM
See the difference. Feel the difference.
Beta 1 Red
Gamma 3 Amber
• Assembly
• Carpenters
• Electrical
• Dry Liners
• Mechanical
• Management
• Plumbing
• Dry Lining
• Trunking
• Electrical
• Glazing
TM
Abrasion
Cut
Tear
Puncture
4
1
2
1
Abrasion
Cut
Tear
Puncture
Theta 5 Green
TM
• Handling sharps
• Steel handling
• Electrical
• Mechanical
• Electrical cladding
• Dry lining
EN 388
EN 388
TM
EN 388
4
3
4
3
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Abrasion
Cut
Tear
Puncture
Association of
Interior Specialists
4
5
4
2
bu i d
F/R Protection Board
c/w logo £1.98
F/R Total Protection Board c/w logo
1220x2440mm 2mm
F/R To LPS 1207
bu i d
500mm
www.8build.co.uk
Total Board - Flame Retardant Protection Board
APPROVED TO LPS1207
2MM / CERT NO. 803a
bu i d
2.4m
www.8build.co.uk
Total Board - Flame Retardant Protection Board
APPROVED TO LPS1207
2MM / CERT NO. 803a
1.2m
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
bu i d
Canteen
Other items available
Cordless kettle
Microwave
Fridge
4 Slice toaster
Burco boiler
Cutlery
Plastic spoons
Tea Bags
Sugar
Coffee
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
bu i d
Janitorial
Other items available
Sponges, cloths cleaning wipes
Bins and buckets
Hand towels, toilet rolls and multi wipes
Cleaning fluids
Spray cleaners and air fresheners
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Cleaning tools
Association of
Interior Specialists
bu i d
First Aid
All sites are required to have first aid equipment on site. It must cater for the
amount of people on your site, be stored somewhere safe and issued by a
fully trained First aid appointed person. A full range of first aid equipment is
available.
First Aid Kit
Resuscitation
Antiseptic wipes
Waterproof
Fabric Plasters
Eye pods
Dressings
Eye pod station
Fire equipment
Servicing
When you know that the extinguishers on your site are almost due for servicing
please contact Eurotec with the full details/description. They will arrange for a
fully qualified engineer to come out to your site to service the extinguisher.
This will be charged to site.
Triple metal fire stand
Full range of fire extinguishers
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
All corresponding signage
Association of
Interior Specialists