USF & SJIC Series
Terminal Boxes
for Harsh and Hazardous
Environments
• QUAD APPROVALS,
ATEX, IEC Ex, CEC, NEC
• 38 USF sizes & 15 SJIC sizes
standard in 316 Stainless Steel to choose from
• Sturdy 2mm thick Sheet Steel construction
• One piece high temperature closed cell silicone gasket.
With superior recovery and re-sealing properties.
• Continuous robot welded seams for a hose down tight seal.
• Choice of 5 Terminal Block manufacturers
• Hinges standard on USF, optional for the SJIC
Harsh & Hazardous
Enclosures from KILLARK
USF & SJIC Series
g…
n
i
uc
The NEXT GENERATION of TERMINAL BOXES
d
o
r
t
For HARSH & HAZARDOUS GLOBAL
In
APPLICATIONS With QUAD APPROVALS
IECEx SIR 14.0054
SIRA 14ATEX3157
0539
Class I, Div. 2, Groups A, B, C, D
Class I, Zone 1 & 2, Groups IIC, IIB, IIA
Class II, Div. 1 & 2, Groups E, F, G
Class III
Enclosure Type 3, 4 & 4X
II 2 G D
Ex e ib IIC T6/T5/T4 Gb
Ex tb IIIC T80°C/T100°C/T130°C Db IP66
C
US
Pe n d i n g
Certified for use with
Weidmuller, Wago,
ABB, Phoenix &
Klemsan Ex e & Ex i
Terminal Boxes
USF Series 38 standard sizes
300 x 300 x 150 through 900 x 600 x 300
316 Stainless Steel 2mm Thick
SJIC & SJICH Series 15 standard sizes,
100 x 100 x 100 through 400 x 350 x 150
316 Stainless Steel 2mm Thick
• External slope top flange directs water, melting ice & snow and dust
build up away from the opening side of the door.
• Screw covers and hinged screw cover.
• Continuous robot welded seams for a hose down tight seal.
• SJICH have continuous one piece hinge construction.
• Concealed hinges with removable door.
• Continuous robot welded seams for a hose down tight seal.
• SJIC doors are interchangeable and easily removable.
• Doors are interchangeable.
• Ground/earthing studs in the cover and through the wall of the box.
• Ground/earthing studs in the cover and through the wall of the box.
• Quarter turn 316 stainless steel latch.
• One piece high temperature closed cell silicone gasket. With superior
recovery and re-sealing properties.
• One piece high temperature closed cell silicone gasket. With superior
recovery and re-sealing properties.
• Sturdy 2mm box construction helps prevent bending or permanent
deflection of the walls when field installing holes.
• Sturdy 2mm box construction helps prevent bending or permanent
deflection of the walls when field installing holes.
• Welded one piece mounting flanges top and bottom for strength.
• Bi-directional removal mounting lugs for the widest flexibility during
installations.
• Available with gland plates
• Openings for glands or conduit factory or field installed.
• Openings for glands or conduit factory or field installed
• Available with gland plates
Supplying quality materials meeting the world-wide demand
for Harsh & Hazardous Electrical Construction Products
www.hubbell-killark.com