Customer:
Date:
Project:
Qty:
Type:
M100
LED Direct
Order Code:
L10
L10
-
Series
-
-
-
-
-
-
-
-
-
-
L10
M100 LED Direct
Values calculated from a 4’ fixture @4000°K using LW
Shielding and standard driver.
For additional information please see page 2.
1 Light Engine
CCT
1A351
725lm/8.5W
per foot
27
2700K
Shielding
LW
Mounting
C
5
YEAR
638lm/7.3W
per foot
1A251,2
536lm/6.0W
per foot
1A201,2
435lm/4.9W
per foot
30
35
40
S
RS
W3
3500K
3000K
Available starting at 2’ and up.
2
4000K
LED Optimized
white lens
Cable
Nominal
Fixture
Length
01
Finish
WH
Voltage
120
1 ft.
Swivel Stem
02
2 ft.
03
3 ft.
04
4 ft.
Rigid Stem
05
5 ft.
06
6 ft.
F4
Wall Mount
07
7 ft.
08
8 ft.
09
9 ft.
White
BK
SV
277
UNV
Black
Silver
120 Volt
277 Volt
120 thru 277
50/60hz capable
Fixture
Options
DL5
FS 5
SS 5
Dimming
Options
DM7,8
Emergency
Options
EC10
Damp Location
Rated
eldoLED 0-10V
(Linear)
In-line Fuse
DML7,8
eldoLED 0-10V
(Logarithmic)
Separate
Switching
DMD7,8
eldoLED DALI
(Logarithmic)
10
10 ft.
SP
Specify Premium Color
Over 8’ supplied with 2 or more housings that are joined
in the field.
4
11
11 ft.
12
12 ft.
XX
Runs (over 12’) & Configurations, round up to the
nearest foot and replace the “xx” with the # (i.e.
13=13’ nominal)
Custom colors are available,
Please consult factory
xxxx6
See page 8 for full details and restrictions
5
LED MR16 downlight
(replace “xxxx” with code from page 10)
DC27,8,9
Lutron 2-Wire
DC37,8
Lutron 3-Wire
DCE7,8
Lutron Eco-System
Lit Inverted
90° Corner
See page 10 for full details and restrictions
6
See page 7 for full details
7
Not available for 1’ length
120V only
8
9
See page 8 for full details and restrictions
10
Emergency Circuit Wiring
V9011
Consult factory for lengths under 2’
3
Surface Mount
(w/Flex Whip
Individual fixtures, Runs and Configurations are supplied in nominal lengths to ensure full, even,
illumination. See pages 2 thru 6 for additional details.
Configuration IL9011
Lit Horizontal
Options
90° Corner
LED WARRANTY
1A301,2
IT9011
Lit “T” section
IX9011
Lit “X” section
See page 9 for full details and restrictions
11
ARRA
Compliant
Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not
alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 1 of 11
(Rev. 01/2015)
M100LED Direct_v1.2
M100
LED Direct
4”
(100mm)
2 3/16” (55mm)
4” (100mm)
Construction:
Electrical/Performance:
Luminaire Finish:
Housing - Continuous, low copper 6063-T6
extruded aluminum profile with aluminum
endcaps, available as Individual fixtures (up to
12’) or Runs.
LED Light Engine - Brand-name mid-power
LEDs create a high efficiency LED light engine
able to provide a lumen maintenance of 96%
at 25,000 hours and 93% at 60,000 hours per
TM-21 report.
Powder Coat - All Selux luminaries are finished
in high quality polyester powder coating in our
Tiger Drylac certified facility and are tested in
accordance with test specifications for coatings
from ASTM and PCI.
LED Life - Calculated L70 greater than 398,000
hours and Reported L70 greater than 60,000
hours @ 25°C per TM-21
All products undergo a five stage intensive
pretreatment process where product is thoroughly cleaned, phosphated, and sealed. Selux
powder coated products provide excellent salt
and humidity resistance as well as ultra violet
resistance for color retention.
Geartray - Low copper 6063-T6 extruded aluminum profile
Shielding - Extruded, impact resistant acrylic
lens:
- LED optimized white lens (LW)
Mounting(s) - 1/16” Aircraft Cable, Ø5/8”
Swivel or Rigid Steel Stem, Wall Bracket, Surface
mounting (see pages 3 thru 6 for details).
** Cable, Stem and Wall mountings may not be
symmetrical for Runs and Configurations due
to the use of modular housing lengths. If symmetrical suspensions are required please consult
the factory.
Delivered Lumens - Due to LED manufacturer’s
tolerances the listed output has a ±5% tolerance. For outputs based on different shielding
or CCT please see photometry section at the
end.
CCT - Available in 2700K, 3000K, 3500K and
4000K, tolerance within a 3-step MacAdam
ellipse.
CRI - Min. 80
Standard Luminaire lengths - All standard
luminaires are supplied in nominal lengths to
ensure full, even, illumination. Runs and Configurations are available in approximately 1/4”
increments starting at the nominal 12’ fixture
length.
** Individual luminaires are not joinable in the
field.
Exact length luminaires - Individual luminaires, runs, and configuration are available
in exact lengths to meet your project needs.
Please consult factory with your requirements.
** Lens luminance may soften at the very
ends of the straight sections for exact length
luminaires.
L10 Joiner(s) - Runs and configurations are
supplied in multiple housing that are joined
together in the field using the supplied L10
Joiner System. This allows ease of installation
and ensures a uniform appearance (see page 8
for detail).
All Drivers - High efficiency, constant current,
soft start, Electronic Class 2 with a PFC>0.90.
For more detailed information on the available
drivers please see page 7.
Thermal Performance:
Ambient Operating Temperature - Luminaires suitable for Max. ambient temperature
of 35° C (95° F) for all drivers, standard and
optional.
Min. ambient temperature of:
-20°C (-4°F) for the Standard driver and optional DML and DMD drivers.
0°C (32°F) for the optional DC2, DC3 and DCE
drivers.
Standard interior colors are White (WH), Black
(BK), and Silver (SV). Selux premium colors (SP)
are available, please specify from your Selux
color selection guide.
Warranty:
5 Year Limited LED Luminaire Warranty Selux offers a 5 Year Limited Warranty to the
original purchaser that the M100 series LED
luminaire shall be free from defects in material and workmanship for up to five (5) years
from date of shipment. This limited warranty
covers the LED driver and LED light engine when
installed according to Selux instructions and
operated within the Ambient Temperature. For
additional details and exclusions, see “Selux
Terms and Condition of Sale.”
Certifications and Compliance:
NRTL - For Dry and Damp location
(I.E. cULus; cCSAus)
ARRA Compliant
RoHS Compliant
Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not
alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 2 of 11
(Rev. 01/2015)
M100LED Direct_v1.2
M100
LED Direct
Cable Mounting (C)
Cable Mounting (C)
1. Ø 1/16” Aircraft Cable with chrome gripper for easy
adjustment (48” max. from ceiling to luminaire).
Cable Mounting (C) - Dimensions
Nominal
Length
“A”
Housing Length
* “B” (Ref.)
End Suspensions
“C”
Mid. Suspension
“D”
Feed Location
Feet/Inch
MM
Feet/Inch
MM
Feet/Inch
MM
Feet/Inch
MM
01 (1 ft.)
1' - 5/16"
313
0' - 2 1/8"
54
0' - 8 1/8"
206
0' - 1 1/8"
29
02 (2 ft.)
1' - 11 7/16"
595
0' - 2 1/8"
54
1' - 7 3/16"
488
0' - 1 1/8"
29
03 (3 ft.)
3' - 5/16"
923
0' - 3 1/8"
79
2' - 6 1/8"
764
0' - 2 1/8"
54
04 (4 ft.)
3' - 11 7/16"
1205
0' - 3 1/8"
79
3' - 5 3/16"
1047
0' - 2 1/8"
54
05 (5 ft.)
4' - 11 7/16"
1510
0' - 3 1/8"
79
4' - 5 3/16"
1351
0' - 2 1/8"
54
06 (6 ft.)
5' - 11 7/16"
1815
0' - 3 1/8"
79
5' - 5 3/16"
1656
0' - 2 1/8"
54
54
07 (7 ft.)
6' - 11 7/16"
2119
0' - 3 1/8"
79
6' - 5 3/16"
1961
0' - 2 1/8"
08 (8 ft.)
7' - 11 7/16"
2424
0' - 3 1/8"
79
7' - 5 3/16"
2266
0' - 2 1/8"
54
09 (9 ft.)
8' - 11 7/16"
2729
0' - 3 1/8"
79
8' - 5 3/16"
2570
0' - 2 1/8"
54
10 (10 ft.)
9' - 11 7/16"
3034
0' - 3 1/8"
79
9' - 5 3/16"
2875
0' - 2 1/8"
54
11 (11 ft.)
10' - 11 7/16"
3339
0' - 3 1/8"
79
10' - 5 3/16"
3180
0' - 2 1/8"
54
12 (12 ft.)
11' - 11 7/16"
3643
0' - 3 1/8"
79
11' - 5 3/16"
3485
0' - 2 1/8"
54
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
L10 Cable (C) Suspension Detail
L10 Cable (C) Suspension Detail
(Feed location(s) only)
(Non-Feed location(s) only)
Outlet box for feed only
(by others)
Cross bar with 1/4-20
rod and ground screw
2x Outlet box screws
(by others)
1/4” x 5” diameter canopy
(white)
Cord strain relief bushing
1/4”- 20 Threaded Rod
(supplied & installed in the
field by others)
1/4” x 2” diameter Canopy
(white)
1/4-20 Slip ring coupler
1/16” Aircraft cable
1/4-20 Slip ring coupler
Chrome gripper
Feed cord (white)
Luminaire
1/16” Aircraft cable
2x White cable stay
Chrome gripper
Luminaire
Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not
alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 3 of 11
(Rev. 01/2015)
M100LED Direct_v1.2
M100
LED Direct
Stem Mounting (S & RS)
Stem Mounting (S & RS)
5/8” Swivel Stem provides 30° swivel and can be cut in
1. Ø
field (48” max. from ceiling to luminaire).
2. Ø 5/8” Rigid Stem is fixed and is not able to be cut/adjusted
in field (48” max. from ceiling to luminaire).
Swivel (S) & Rigid Stem (RS) Mountings - Dimensions
Nominal
Length
* “B” (Ref.)
End Suspensions
“A”
Housing Length
“C”
Mid. Suspension
“D”
Feed Location
Feet/Inch
MM
Feet/Inch
MM
Feet/Inch
MM
Feet/Inch
MM
01 (1 ft.)
1' - 5/16"
313
0' - 2 1/8"
54
0' - 8 1/8"
206
0' - 2 1/8"
54
02 (2 ft.)
1' - 11 7/16"
595
0' - 2 1/8"
54
1' - 7 3/16"
488
0' - 2 1/8"
54
03 (3 ft.)
3' - 5/16"
923
0' - 3 1/8"
79
2' - 6 1/8"
764
0' - 3 1/8"
79
04 (4 ft.)
3' - 11 7/16"
1205
0' - 3 1/8"
79
3' - 5 3/16"
1047
0' - 3 1/8"
79
05 (5 ft.)
4' - 11 7/16"
1510
0' - 3 1/8"
79
4' - 5 3/16"
1351
0' - 3 1/8"
79
06 (6 ft.)
5' - 11 7/16"
1815
0' - 3 1/8"
79
5' - 5 3/16"
1656
0' - 3 1/8"
79
07 (7 ft.)
6' - 11 7/16"
2119
0' - 3 1/8"
79
6' - 5 3/16"
1961
0' - 3 1/8"
79
08 (8 ft.)
7' - 11 7/16"
2424
0' - 3 1/8"
79
7' - 5 3/16"
2266
0' - 3 1/8"
79
09 (9 ft.)
8' - 11 7/16"
2729
0' - 3 1/8"
79
8' - 5 3/16"
2570
0' - 3 1/8"
79
10 (10 ft.)
9' - 11 7/16"
3034
0' - 3 1/8"
79
9' - 5 3/16"
2875
0' - 3 1/8"
79
11 (11 ft.)
10' - 11 7/16"
3339
0' - 3 1/8"
79
10' - 5 3/16"
3180
0' - 3 1/8"
79
12 (12 ft.)
11' - 11 7/16"
3643
0' - 3 1/8"
79
11' - 5 3/16"
3485
0' - 3 1/8"
79
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
L10 Swivel Stem (S) Suspension Detail
L10 Rigid Stem (RS) Suspension Detail
(feed wires through stem supplied by Selux)
(feed wires through stem supplied by Selux)
3/8 IP nipple
(supplied & installed by others)
Outlet box
(supplied & installed by others)
3/8”IP Cross bar with ground screws
Outlet box
(supplied & installed by others)
Square nut
Pin
Hemispherical assembly
1 7/16” x 5” diameter canopy
(white)
Suspension hickey
Square nut
1/4” x 5” diameter canopy
(white)
3/8” IP steel stem (white)
Canopy securing screw
Dress nut
3/8” IP steel stem (white)
Luminaire
Square nut
Dress nut
Luminaire
Square nut
Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not
alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 4 of 11
(Rev. 01/2015)
M100LED Direct_v1.2
M100
LED Direct
Wall Mounting (W)
Wall (W) Mount - Dimensions
Nominal
Length
“A”
Housing Length
* “B” (Ref.)
End Suspensions
“C”
Mid. Suspension
Feet/Inch
MM
Feet/Inch
MM
Feet/Inch
01 (1 ft.)
1' - 5/16"
313
0' - 6 3/16"
157
NA
02 (2 ft.)
1' - 11 7/16"
595
0' - 3 1/8"
79
1' - 5 3/16"
“D”
Feed Location
MM
Feet/Inch
MM
0' - 6 3/16"
157
437
0' - 3 1/8"
79
03 (3 ft.)
3' - 5/16"
923
0' - 6 1/8"
156
2' - 1/8"
612
0' - 6 1/8"
156
04 (4 ft.)
3' - 11 7/16"
1205
0' - 6 1/8"
156
2' - 11 3/16"
894
0' - 6 1/8"
156
05 (5 ft.)
4' - 11 7/16"
1510
0' - 6 1/8"
156
3' - 11 3/16"
1199
0' - 6 1/8"
156
06 (6 ft.)
5' - 11 7/16"
1815
0' - 6 1/8"
156
4' - 11 3/16"
1504
0' - 6 1/8"
156
07 (7 ft.)
6' - 11 7/16"
2119
0' - 6 1/8"
156
5' - 11 3/16"
1808
0' - 6 1/8"
156
08 (8 ft.)
7' - 11 7/16"
2424
0' - 6 1/8"
156
6' - 11 3/16"
2113
0' - 6 1/8"
156
09 (9 ft.)
8' - 11 7/16"
2729
0' - 6 1/8"
156
7' - 11 3/16"
2418
0' - 6 1/8"
156
10 (10 ft.)
9' - 11 7/16"
3034
0' - 6 1/8"
156
8' - 11 3/16"
2723
0' - 6 1/8"
156
11 (11 ft.)
10' - 11 7/16"
3339
0' - 6 1/8"
156
9' - 11 3/16"
3028
0' - 6 1/8"
156
12 (12 ft.)
11' - 11 7/16"
3643
0' - 6 1/8"
156
10' - 11 3/16"
3332
0' - 6 1/8"
156
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
Wall Mount (W)
(Covers a 4x4 or 2x4 J-Box)
1. Aluminum wall bracket (by Selux)
2. 4”x4” or 2”x4” J-Box at feed location (supplied and installed by
others).
3. 1/4-20 Threaded rod, 1/4-20 lock washer and 1/4-20 nut required to
anchor the wall bracket. Mounting hardware supplied and installed
to code by others.
4”
(102mm)
4”
(102mm)
1”
(25mm)
4 15/16”
(126mm)
Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not
alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 5 of 11
(Rev. 01/2015)
M100LED Direct_v1.2
M100
LED Direct
Surface Mounting (F) - 1’ to 8’
Surface Mounting (F) - Over 9’ to 12’
Surface Mount (F) - Dimensions
Nominal
Length
“A”
Housing Length
* “B” (Ref.)
End Suspensions
Feet/Inch
MM
Feet/Inch
MM
01 (1 ft.)
1' - 5/16"
313
0' - 1 5/8"
41
* “B1”
End Suspensions
Feet/Inch
MM
“C”
Mid. Suspension
Feet/Inch
MM
N/A
0' - 9 1/8"
231
“C1”
Mid. Suspension
Feet/Inch
MM
“C2”
Mid. Suspension
Feet/Inch
N/A
MM
“D”
Feed Location
Feet/Inch
MM
N/A
0' - 4 1/8"
105
02 (2 ft.)
1' - 11 7/16"
595
0' - 1 5/8"
41
N/A
1' - 8 3/16"
513
N/A
N/A
0' - 4 1/8"
105
03 (3 ft.)
3' - 5/16"
923
0' - 6 1/8"
156
N/A
2' - 1/8"
612
N/A
N/A
0' - 2 1/8"
54
04 (4 ft.)
3' - 11 7/16"
1205
0' - 6 1/8"
156
N/A
2' - 11 3/16"
894
N/A
N/A
0' - 2 1/8"
54
05 (5 ft.)
4' - 11 7/16"
1510
0' - 6 1/8"
156
N/A
3' - 11 3/16"
1199
N/A
N/A
0' - 2 1/8"
54
06 (6 ft.)
5' - 11 7/16"
1815
0' - 6 1/8"
156
N/A
3'
914
1' - 11 3/16"
590
N/A
0' - 2 1/8"
54
07 (7 ft.)
6' - 11 7/16"
2119
0' - 6 1/8"
156
N/A
3'
914
2' - 11 3/16"
894
N/A
0' - 2 1/8"
54
08 (8 ft.)
7' - 11 7/16"
2424
0' - 6 1/8"
156
3'
914
3' - 11 3/16"
1199
09 (9 ft.)
8' - 11 7/16"
2729
0' - 6 1/8"
156
0' - 6"
153
3' - 11 3/16"
1199
10 (10 ft.)
9' - 11 7/16"
3034
0' - 6 1/8"
156
0' - 6"
153
3'
914
1' - 11 3/16"
11 (11 ft.)
10' - 11 7/16"
3338
0' - 6 1/8"
156
0' - 6"
153
3'
914
2' - 11 3/16"
12 (12 ft.)
11' - 11 7/16"
3643
0' - 6 1/8"
156
0' - 6"
153
3'
914
3' - 11 3/16"
N/A
0' - 2 1/8"
54
3'
914
0' - 2 1/8"
54
590
3'
914
0' - 2 1/8"
54
894
3'
914
0' - 2 1/8"
54
1199
3'
914
0' - 2 1/8"
54
NA
N/A
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
Surface Mount (F)
1. Ø 5/16” Mounting hole drilled at the factory
(mounting hardware to code by others).
Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not
alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 6 of 11
(Rev. 01/2015)
M100LED Direct_v1.2
M100
LED Direct
Standard Drivers for 1’ Luminaires:
Standard Drivers for 2’ fixtures and longer:
Non-dimming driver
1’ luminaires are supplied with standard non-dimming driver.
0-10V linear dimming
Fixtures supplied with drivers capability of either normal switched operation or 0-10V dimming for linear dimming curve. Fixtures ship with the
dimming leads capped, for dimming operation un-cap the wires. Minimum dimming level down to 1%. Max. inrush current per driver 30mA²s
and 0-10V control current Max. 2mA per driver.
Optional eldoLED Dimming Drivers:
Optional LUTRON Dimming Drivers:
eldoLED 0-10V linear dimming (DM)
Luminaires supplied with SOLOdrive 0-10V dimming driver for linear
dimming curve. Minimum dimming level preset at factory to 1%. For “dim
to dark” (down to 0.1%), please consult factory. Max. inrush current per
driver 30mA²s and 0-10V control current Max. 2mA per driver.
LUTRON 2-wire dimming (DC2)
Luminaires supplied with A-series 2-wire dimming driver programmed for
Constant Current Reduction (CCR). For Pulse Width Modulation (PWM)
dimming, please consult factory. Minimum dimming level down to 1%.
Inrush current per driver < 2A.
eldoLED 0-10V logarithmic dimming (DML)
Luminaires supplied with SOLOdrive 0-10V dimming driver for logarithmic
dimming curve. Minimum dimming level preset at factory to 1%. For “dim
to dark” (down to 0.1%), please consult factory. Max. inrush current per
driver 30mA²s and 0-10V control current Max. 2mA per driver.
LUTRON 3-wire dimming (DC3)
Luminaires supplied with A-series 3-wire dimming driver programmed for
Constant Current Reduction (CCR). For Pulse Width Modulation (PWM)
dimming, please consult factory. Minimum dimming level down to 1%.
Inrush current per driver < 2A.
eldoLED DALI dimming (DMD)
Luminaires supplied with SOLOdrive DALI dimming driver for logarithmic
dimming curve. Minimum dimming level preset at factory to 1%. For “dim
to dark” (down to 0.1%), please consult factory. Max. inrush current per
driver 30mA²s.
LUTRON EcoSystem dimming (DCE)
Luminaires supplied with A-series EcoSystem (4 wire, digital link) dimming driver programmed for Constant Current Reduction (CCR). For Pulse
Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to 1%. Inrush current per driver < 2A.
*For control recommendation for eldoLED drivers, please contact eldoLED.
**For control recommendation and system layout for LUTRON drivers,
please contact LUTRON.
Driver Quantity
1 ft.
2 ft.
3 ft.
4 ft.
5 ft.
6 ft.
7 ft.
8 ft.
9 ft.
10 ft.
11 ft.
12 ft.
RUN
Standard Driver and
Optional DML & DMD drivers
1
1
1
1
1
1
2
2
2
2
3
3
Approximately 1 driver
per 4 ft.
Optional DC2, DC3, & DCE drivers
1
1
1
1
1
2
2
2
3
3
3
3
Consult Factory
Wiring Diagrams
Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not
alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 7 of 11
(Rev. 01/2015)
M100LED Direct_v1.2
M100
LED Direct
Fuse (FS) - Fusing, luminaires supplied with a in-line fuse located on the
hot wire for each feed. (supplied with an 8A slow burn fuse).
Damp Location (DL) - Luminaires are suitable for use in damp
location(s). Examples of such locations include protected areas under
canopies, marquees, roofed porches, and similar locations where the
fixture(s) are protected from direct contact with rain, snow, or excessive
moisture (such as ocean spray). Interior locations include areas subject
to moderate degrees of moisture, such as basements and certain barns
and cold storage buildings. All solder points on LED boards are conformal
coated. The phosphor layer of the LEDs is free of coating to avoid hazing.
Separate Switching (SS) - Luminaires available with separately
switched 4’ (nominal) sections starting at 7’ and up. Luminaire is intended to be wired to the same panel/breaker (not intended for Emergency use).
- To specify this option, the number of separately switched sections and
locations of these sections must be provided at time of order.
* If the project requires different separate switching than outlined above
please consult the factory.
Emergency Circuit (EC) - Luminaires with EC option compliant to UL
924 listed emergency luminaire. EC luminaires are intended to be wired to
separate panels/breakers for emergency use.
- For 1’ to 6’ nominal luminaires, the entire fixture is wired for
operation on emergency circuit.
- For 7’ and up nominal luminaires, the first 4’ nominal length is
wired for operation by a separate EM circuit by default to meet
the required “Life Safety Code” (NFPA 101).
*If a different configuration is needed please consult the factory.
Joiner System - standard for Runs and Configurations
Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not
alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 8 of 11
(Rev. 01/2015)
M100LED Direct_v1.2
M100
LED Direct
Standard Direct shapes/configurations:
Listed below are the minimum lengths and details for standard shapes.
These standard shapes can be combined with each other and/or the
standard luminaire lengths, ensuring full even illumination. If you have any
questions, please consult the factory.
The minimum standard lengths for “L” shapes:
- IL90 or V90 open shapes is 4’ x 4’ nominal (example: leg, 90, leg)
- IL90 or V90 closed shapes is 6’ x 6’ nominal (example: 90, leg, 90)
(E xception is that the IL90 & V90’s can be joined directly to provide
a 4’ x 4’ nominal shape)
The minimum standard lengths for “T” & “X” shapes:
- IT90 = 4’ nominal on the short leg and 8’ nominal on the long side
- IX90 = 8’ nominal for either direction
Project Specific Direct shapes/configurations:
Selux is capable of supplying a wide range of project solutions including different shapes, angles, and sizes to meet the project requirements.
Due to the complex nature of these project specific layout(s) we ask that you please consult the factory with the project requirements for review.
Direct Lit Corner and Section - Dimensions
IL90
V90
Feet/Inch
MM
“A” Housing (Outside)
2' - 2 1/16"
662
“A1” Housing (Inside)
1' - 10 1/8"
562
IT90
Feet/Inch
MM
“B” Housing (Outside)
2' - 3 1/2"
698
“B1” Housing (Inside)
1' - 11 1/2"
597
IX90
Feet/Inch
MM
Feet/Inch
MM
“C” Housing
2' - 2 1/16"
662
* “C1” Ref.
2' - 1/8"
612
“D” Housing
4' - 3/16"
1224
“E” Housing
* “D1” Ref.
2' - 1/8"
612
4' - 3/16"
1224
* “E1” Ref.
2' - 1/8"
612
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not
alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 9 of 11
(Rev. 01/2015)
M100LED Direct_v1.2
M100
LED Direct
LED Downlight
LED Downlight Ordering Chart
Quantity
X Number of Downlights
Aperture Shape
R Round
S Square
Wattage
9 9W
CCT
3 3000K
Performance
8 80 CRI, R9 >0. 590 lumens, CBCP 3260cd.
9 95 CRI, R9 95. 490 lumens, CBCP 2700cd.
Ex: 1R938 = 1 Downlight, Round aperture, 9W, 3000K, 80 CRI
Length – 1’ (305mm) section with 1 LED lamp centered. Standard configuration is at the start or end of a run. For other configurations, please
consult the factory.
LED Light Engine – 9W, 3000K SORAA MR16 GU5.3 base lamp, with 25°
beam angle. 80CRI (R9 >0) or 95CRI (R9 =95) available.
Dimming – MR16 LED lamp uses LightTech LET60 electronic dimming
driver, 120V only, separately wired. For dimming compatibility, please see
SORAA’s website: http://www.soraa.com/resources/compatibility
Adjustability - +/- 25º tilt with 360º rotation for Round, 90° rotation for
Square.
Lens – Removable frosted glass lens sits in housing aperture, giving a
smooth, clean finish when downlight is off.
Warranty – Supplied SORAA lamp is not covered by the Selux LED
Luminaire Warranty. Replacement lamps should be suitable for enclosed
luminaires, and rated for 90°C.
1x Downlight
(Round shown)
2x Downlight
(Square shown)
Minimum luminaire length for 1x Downlight is 2’
Minimum luminaire length for 2x Downlight is 3’
Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not
alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 10 of 11
(Rev. 01/2015)
M100LED Direct_v1.2
M100
LED Direct
Photometry
LW Optics / 34W LED / 4000K CCT
1029
Link to photometry (IES & PDF files)
772
515
257
Catalog #: L10-1A35-40-LW-04-120
Report #: 747916
Delievered Lumens: 2900
Input Watts: 34W
Efficacy: 85
Power Factor: 0.994
Total Harmonic Distortion: 5.07
CCT: 3950K
CRI: 83.9
Max Candela: 1029 @ 2.5° from Vertical
Spacing Criterion (0-180): 1.28
Spacing Criterion (90-270): 1.26
Spacing Criterion (Diagonal): 1.38
CCT Multiplier
1
Maximum Candela = 1029.4 Located At Horizontal Angle = 0, Vertical Angle = 2.5
# 1 - Vertical Plane Through Horizontal Angles (90 - 270)
# 2 - Vertical Plane Through Horizontal Angles (0 - 180)
Light Engine Multiplier
4000K
1.000
Engine
Lumens
3500K
0.936
1A35
1.00
1.00
3000K
0.945
1A30
0.88
0.86
2700K
0.923
CCT multipliers apply to the photometry,
IES files, and per foot values listed on
page one (light engine).
2
Watts
1A25
0.74
0.71
1A20
0.60
0.58
Light engine multiplier supplied for per foot
values listed on page one (light engine).
Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not
alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 11 of 11
(Rev. 01/2015)
M100LED Direct_v1.2