1. No category

Concrete Connectors & Anchors
Concrete Connectors & Anchors
ANCHORING SYSTEMS
Sill Plate Anchorage and Fastening Solutions
Simpson Strong-Tie offers many fastening and post-installed anchorage solutions for sill plate applications in concrete
or concrete block foundations. These products are often used in retrofit/expansion applications or when cast-in-place
anchors are omitted or mis-located. Various product finishes are available to address most environmental or preservativetreated wood conditions. For more information on product performance, installation requirements, corrosion and
appropriate code listings for Simpson Strong-Tie® products, please visit www.strongtie.com.
Anchoring Adhesives
Software Tools to Help You
Select the Right Products
Direct Fastening Systems
Anchor
Designer™
ACI 318
Adhesive
Cartridge
Estimator
For more information,
visit www.strongtie.com/software.
42
C-C-2015 © 2015 SIMPSON STRONG-TIE COMPANY INC. PRINTED 12/14
Mechanical Anchors
ANCHORING SYSTEMS
For Cracked-Concrete Applications
SET-XP ® High-Strength Anchoring Adhesive
Cracked
Concrete
CODE LISTED
A two-part, high-strength epoxy anchoring adhesive system formulated for threaded rod and rebar anchoring into concrete
(cracked/uncracked) and masonry, SET-XP is a teal color when mixed, providing easy post-installation identification.
FEATURES:
•
Qualified under ICC-ES AC308 regarding elevated temperature and long-term sustained loading conditions
•Code-listed under the IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-2508
•Code-listed under the IBC/IRC for masonry per IAPMO UES ER-265
•
Suitable for use under static and seismic loading conditions in cracked and uncracked concrete
•Multiple DOT listings; refer to www.strongtie.com/DOT
•Manufactured in the USA using global materials
CODES: ICC-ES ESR-2508 (concrete); IAPMO UES ER-265 (masonry); City of L.A RR25744 (concrete); City of L.A. RR25965 (masonry);
Florida FL15730 (concrete), FL16230 (masonry); ASTM C 881 (Type I and IV, Grade 3, Class C); NSF/ANSI Standard 61 (216 in2 /1000 gal)
AT-XP ® High-Strength, Fast-Cure, All-Weather Anchoring Adhesive
Concrete Connectors & Anchors
Concrete Connectors & Anchors
Cracked
Concrete
CODE LISTED
Formulated for high-strength anchorage of threaded rod and rebar into concrete (cracked/uncracked) and masonry under a wide range of
conditions, AT-XP dispenses easily in cold or warm environments and, when mixed, is a dark teal color for easy post-installation identification.
FEATURES:
•
Qualified under ICC-ES AC308 regarding reduced temperature, elevated temperature, and long-term sustained loading conditions
•Code-listed under the IBC/IRC for cracked and uncracked concrete per IAPMO UES ER-263
•Code-listed under the IBC/IRC for masonry per IAPMO UES ER-281
•Fully cures in temperatures as low as 14°F (-10°C)
•
Suitable for use under static and seismic loading conditions in cracked and uncracked concrete
•Manufactured in the USA using global materials
CODES: IAPMO UES ER-263 (concrete), ER-281 (masonry); City of L.A. RR25960 (concrete), RR25966 (masonry); Florida FL 16230,
NSF/ANSI Standard 61 (43.2 in2 /1000 gal)
C-C-2015 © 2015 SIMPSON STRONG-TIE COMPANY INC. PRINTED 12/14
ET-HP ® Anchoring Adhesive
Cracked
Concrete
CODE LISTED
A two-part epoxy anchoring adhesive system formulated for threaded rod and rebar anchoring into concrete
(cracked/uncracked) and masonry.
FEATURES:
•
Qualified under ICC-ES AC308 regarding elevated temperature and long-term sustained loading conditions
•Code-listed under the IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-3372
•Code-listed under the IBC/IRC for uncracked masonry per IAPMO UES ER-241
•
Suitable for use under static and seismic loading conditions in cracked and uncracked concrete
•Multiple DOT listings; refer to www.strongtie.com/DOT
•Manufactured in the USA using global materials
CODES: ICC-ES ESR-3372 (concrete); ICC-ES ESR-3638 (unreinforced masonry); IAPMO UES ER-241 (masonry);
City of L.A. RR25120 (unreinforced masonry); ASTM C 881 (Type I, II, IV and V, Grade 3, Class B and C, except gel time)
Cracked
STRONG-BOLT ® 2 Wedge Anchor
Concrete
CODE LISTED
A wedge-type expansion anchor designed for optimum performance in cracked and uncracked concrete and uncracked masonry,
the Strong-Bolt 2 is available in carbon-steel (1⁄4" through 1" diameter) and Type 316 stainless steel (1⁄4" through 3⁄4" diameter).
FEATURES:
•Code-listed under IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-3037
•Code-listed under IBC/IRC for masonry per IAPMO UES ER-240
•Qualified for static and seismic loading conditions
CODES: ICC-ES ESR-3037(concrete); IAPMO UES ER-240 (carbon steel in CMU); City of L.A. RR25891 (concrete),
RR25936 (carbon steel in CMU); Florida FL 15731; UL File Ex3605; FM 3043342 and 3047639; meets the requirements of
Federal Specifications A-A-1923A, Type 4
TORQ-CUT™ Self-Undercutting Anchor
Cracked
Concrete
CODE LISTED
A heavy-duty, high-capacity, self-undercutting anchor designed for cracked and uncracked concrete applications,
the Torq-Cut has a built-in cutting ring that provides superior load-carrying capacity.
FEATURES:
•Code-listed under IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-2705
•Provides higher load-carrying capacity that conventional mechanical anchors
•Excellent for resisting seismic (SDC A-F) and vibratory loads
•No special installation tools required
CODES: ICC-ES ESR-2705 (concrete); City of L.A. RR25946 (concrete); Florida FL15731
U.S. Patent 7,357,613
For complete information on these products, visit www.strongtie.com.
43
Concrete Connectors & Anchors
Concrete Connectors & Anchors
ANCHORING SYSTEMS
TITEN HD ® Concrete Screw
U.S. Patent
5,674,035 & 6,623,228
For Cracked-Concrete Applications
Cracked
Concrete
CODE LISTED
The original, patented, high-strength screw anchor that offers industry-leading performance in cracked and uncracked concrete
and uncracked masonry, the Titen HD installs with low installation torque for maximum efficiency.
FEATURES:
•Code-listed under IBC/IRC in accordance with ICC-ES AC193 for cracked and uncracked concrete per
ICC-ES ESR-2713; includes Titen HD® Rod Hanger (models THD37212RH and THD50234RH only)
•Code-listed under IBC/IRC in accordance with ICC-ES AC106 for masonry per ICC-ES ESR-1056
•Qualified for static and seismic loading conditions
•Standard fractional sizes; no special drill bits required
•Removable; ideal for temporary anchoring applications like formwork or bracing
CODES: ICC-ES ESR-2713 (concrete), ICC-ES ESR-1056 (masonry); City of L.A. RR25741 (concrete), RR25560 (masonry);
Florida FL 15730; FM 3017082, 3035761 and 3043442
ANCHORING SYSTEMS
For General-Purpose Applications
SET® Anchoring Adhesive
A non-shrink, epoxy based anchoring system, SET is formulated for anchoring threaded rod and rebar in a
wide range of base materials.
FEATURES:
•Code-listed under the IBC/IRC for URM per ICC-ES ESR-1772
•Excellent as a pick-proof sealant around doors, windows and fixtures
•CalTrans and multiple DOT listings; refer to www.strongtie.com/DOT
•Manufactured in the USA using global materials
CODES: ICC-ES ESR-1772 (URM); City of L.A. RR25279 (masonry); Florida FL 15730; ASTM C 881 (Type I, II and IV,
Grade 3, Class B and C); NSF/ANSI Standard 61 (216 in2 /1000 gal) – except SET 1.7KTA
An acrylic-based adhesive anchoring system, AT is formulated for use as a high-strength anchoring material for
threaded rod and rebar in a wide range of temperatures and base materials.
FEATURES:
•Code-listed under the IBC/IRC for URM per ICC-ES ESR-1958
•Fully cures in temperatures as low as 0°F (-18°C)
•Multiple DOT listings; refer to www.strongtie.com/DOT
•Manufactured in the USA using global materials
CODES: ICC-ES ESR-1958 (URM); Florida FL 14832; ASTM C 881 (Type I and IV, Grade 3, Class A, B and C – except AT
is a non-epoxy formulated for fast cure time); NSF/ANSI Standard 61 (2.2 in2 /1000 gal)
WEDGE-ALL® Wedge Anchor
A non-bottom bearing, wedge-style expansion anchor for use in solid concrete or grout-filled masonry, the Wedge-All
is available in carbon steel, mechanically galvanized, and Types 303/304/316 stainless steel.
FEATURES:
•Code-listed under the IBC/IRC for CMU per ICC-ES ESR-1396
•One-piece, wrap-around clip ensures uniform holding capacity
•Chamfered thread end for ease of starting nut
•Wide range of diameters and lengths for added versatility
CODES: ICC-ES-ESR-1396 (CMU); City of L.A. RR24682 (CMU); Florida FL 15730; FM 3017082 and 3131136;
UL File Ex3605; meets the requirements of Federal Specifications A-A-1923A, Type 4.
Note: The Tie-Wire Anchor is not code-listed.
44
For complete information on these products, visit www.strongtie.com.
C-C-2015 © 2015 SIMPSON STRONG-TIE COMPANY INC. PRINTED 12/14
AT Fast-Cure, All-Weather Anchoring Adhesive