FEATURES OPTICAL SYSTEM • Reflector – Self-flanged, semi-specular or matte-diffuse reflector. Patented Bounding RayTM Optical Principle design (U.S. Patent No. 8,500,050) provides lamp before lamp image and smooth transition from top of reflector to bottom. Minimum flange matches reflector finish. • Decorative Element - 3/16"-thick low-lead glass with polished edges and sandblasted finish. Ring or disk style available. Precision-machined aluminum hardware with threaded spacers for easy maintenance. MECHANICAL SYSTEM • 16-gauge galvanized steel mounting/plaster frame with friction support springs to retain optical system. Accommodates up to 7/8” thick ceiling standard. • 16-gauge galavanized steel mounting bars with continuous 4" vertical adjustment are shipped pre-installed. Post installation adjustment possible without the use of tools sbove or below ceiling. • Galvanized steel junction box with hinged access covers and spring latch. Two combination 1/2”-3/4” and four 1/2” knockouts for straight-through conduit runs. Capacity: 8 (4 in, 4 out) No. 12 AWG conductors rated for 90°C. ELECTRICAL SYSTEM • Die-cast aluminum lampholder housing. • Medium-base porcelain socket with nickel-plated screw shell. Extended porcelain socket for “open fixture” rated lamps. • Prewired, encased-and-potted, 120/277V or 120/347V ballast tray module. Module can be attached before or after mounting of mounting/plaster frame. • Metal halide: 150W is standard with electronic ballast. • Thermally-activated insulation detector. LISTING • Fixtures are UL Listed for thru-branch wiring, Non-IC recessed mounting and damp locations. Listed and labeled to comply with Canadian Standards. Type Catalog number ............................. ....................................................................................................... ............................. ....................................................................................................... Decorative HID Downlights 8" AH Ring Drop Luminous Ring/Disk Metal Halide Lamp Disk 17-7/16 (44.3) 7 [44.3] 1716 18-15/16 (48.1) 1815 16 [48.1] Aperture: 7-7/8 (20.1) Ceiling opening: 8-7/8 (22.5) Overlap trim: 9-1/4 (23.5) 10-5/8 (27.0) 1058 [27.0] Height Information Distribution 1 [2.6] AH 8AR 9 - 3/16 (23.3) AH 8ARN 10 - 1/8 (25.6) 1 (2.6) 9-7/8 (25.1) Height 9 78 [25.1] Magnetic Ballast Dimensions Shown. HEB Dimensions L 16 (40.6) x W 15-13/16 (40.2) ORDERING INFORMATION All dimensions are inches (centimeters). Example: AH 150MHC 8AR DLR T73 120 HEB Choose the boldface catalog nomenclature that best suits your needs and write it on the appropriate line. Order accessories as separate catalog numbers (shipped separately). AH Series Wattage /Lamp1 Aperture /Trim color AH Metal Halide 8AR Clear 8PR Pewter 8WTR Wheat 50M 70M 100M 150M2 Color-Corrected Metal Halide3 50MHC 70MHC 100MHC 150MHC2 Distribution Finish (blank) Wide N Narrow (blank) Semispecular LD Mattediffuse Lens type5 (blank) No lens CGL Safety glass T73 Tempered prismatic lens Decorative Element DLR Drop luminous ring DLD Drop luminous disk High Pressure Sodium 150S NOTES 1 Recommended for use with coated lamps. 2 California Title 20 compliant. Only available with HEB ballast. 3 Ceramic arc tube consistent-color lamp. 4 Not available with finishes. 5 Required for use with enclosed rated lamps. 6 7 8 9 10 Not available with HEB. For compatible Reloc systems, refer to TECH-110. Not available with QRSTD or EC. Not available with QRS or EC. Not available with QRS or QRSTD. Voltage Options 120 277 3476 HEB Electronic ballast QRS8 Quartz restrike system (uses 100W maximum DC base quartz lamp by others) 9 QRSTD Quartz restrike system with time delay. Operates like QRS, except quartz lamp remains on for two minutes after HID lamp restrikes. EC10 Emergency circuit (DC socket with leads for connection to external emergency power source; max. 100W lamp) SF Single fuse TRW White painted flange TRBL Black painted GSKT Foam gasketing WLP With lamp (shipped separately) LRC7 Provides compatibility with Lithonia Reloc® System. Lithonia Reloc System can be installed less this option with connectors provided by others. Access above ceiling required. CP Chicago plenum AH 8 DECO DHID-220-D 8" AH Drop Luminous Ring/Disk Distribution curve Distribution data Output data Coefficient of utilization Illuminance Data at 30" Above Floor for a Single Luminaire AH 100M 8AR DLD, (1) 100W metal halide lamp, 7500 rated lumens, 1.0 s/mh, Test No. LTL19799 1000 60° 2000 40° 0° 0 5 15 25 35 45 55 65 75 85 90 Lumens 263 733 974 937 656 396 184 97 30 Zone Lumens % Lamp 26.3 0° - 30° 1969.6 38.8 0° - 40° 2906.7 52.8 0° - 60° 3957.9 56.9 0° - 90° 4269.8 0.0 0.0 90° - 180° 0° - 180° 4269.8 *56.9 *Efficiency pf pc pw 0 1 2 3 4 5 6 7 8 9 10 RCR 80° Ave 2776 2767 2608 2118 1514 837 454 179 91 25 10 80% 50% 30% 10% 68 68 68 61 60 58 55 52 50 50 47 44 46 42 39 42 38 35 38 34 31 35 31 28 33 29 26 31 26 24 29 25 22 20% 70% 50% 30% 10% 66 66 66 60 58 57 54 52 49 49 46 43 45 41 38 41 37 34 38 34 31 35 31 28 33 29 26 30 26 24 28 24 22 50% 50% 30% 10% 63 63 63 58 56 55 53 50 48 48 45 43 44 40 38 40 37 34 37 33 31 34 31 28 32 28 26 30 26 24 28 24 22 50% beam 54.5° 10% beam 91.1° Inital FC Mounting Center Height Beam Diameter FC Diameter FC 9.2 45.9 11.2 5.7 8.0 91.8 4.9 24.7 15.3 7.7 49.4 10.0 3.1 15.4 19.4 9.8 30.8 12.0 2.1 10.5 23.4 21.0 11.9 14.0 7.6 27.5 1.5 15.2 13.9 16.0 20° AH 100M 8AR DLR, (1) 100W metal halide lamp, 7500 rated lumens, 1.1 s/mh, Test No. LTL19798 60° 1400 2800 0° 40° Ave 3509 3562 3821 3090 1898 894 164 51 25 9 4 Lumens 343 1058 1406 1184 682 184 55 27 10 pf pc pw 0 1 2 3 4 5 6 7 8 9 10 RCR 80° 0 5 15 25 35 45 55 65 75 85 90 Zone Lumens % Lamp 37.4 0° - 30° 2807.6 53.2 0° - 40° 3991.2 64.8 0° - 60° 4856.8 66.0 0° - 90° 4948.9 0.0 0.0 90° - 180° 0° - 180° 4948.9 *66.0 *Efficiency 80% 50% 30% 10% 79 79 79 72 70 69 66 63 61 61 57 54 56 52 49 52 48 45 48 44 41 45 40 37 42 37 34 39 35 32 37 32 30 20% 70% 50% 30% 10% 77 77 77 71 69 68 65 63 60 60 57 54 56 52 49 51 47 44 48 44 40 44 40 37 41 37 34 39 35 32 36 32 29 50% 50% 30% 10% 73 73 73 68 67 66 63 61 59 58 55 53 54 51 48 50 47 44 47 43 40 44 40 37 41 37 34 38 34 32 36 32 29 50% beam 10% beam 58.2° 88.6° Inital FC Mounting Center Beam Diameter FC Diameter FC Height 11.6 58.0 10.7 6.1 8.0 116.0 6.2 31.2 14.6 8.3 62.4 10.0 3.9 19.4 18.5 10.6 38.9 12.0 2.7 13.3 22.4 26.5 12.8 14.0 9.6 26.3 1.9 19.3 15.0 16.0 20° AH 150M 8AR DLD, (1) 150W metal halide lamp, 11000 rated lumens, 1.0 s/mh, Test No. LTL19803 1400 60° 2800 40° 0° Ave 3975 3964 3749 3055 2219 1215 676 257 131 35 13 Lumens 377 1053 1407 1367 952 586 264 139 42 Zone Lumens % Lamp 25.8 0° - 30° 2837.2 38.2 0° - 40° 4203.9 52.2 0° - 60° 5741.8 56.2 0° - 90° 6187.0 0.0 0.0 90° - 180° 0° - 180° 6187.0 *56.2 *Efficiency RCR 80° 0 5 15 25 35 45 55 65 75 85 90 pf pc pw 0 1 2 3 4 5 6 7 8 9 10 80% 50% 30% 10% 67 67 67 61 59 57 55 52 49 50 46 43 45 41 38 41 37 34 38 34 31 35 31 28 32 28 25 30 26 23 28 24 22 20% 70% 50% 30% 10% 65 65 65 59 58 56 54 51 49 49 45 43 45 41 38 41 37 34 37 33 31 35 31 28 32 28 25 30 26 23 28 24 22 50% 50% 30% 10% 62 62 62 57 56 54 52 50 48 47 44 42 43 40 37 40 36 34 37 33 30 34 30 28 31 28 25 29 26 23 27 24 21 50% beam 54.9° 10% beam 91.4° Inital FC Mounting Center Beam Diameter FC Diameter FC Height 13.1 65.7 11.3 5.7 8.0 131.4 7.1 35.3 15.4 7.8 70.7 10.0 4.4 22.0 19.5 9.9 44.0 12.0 3.0 15.0 23.6 30.1 12.0 14.0 10.9 27.7 2.2 21.8 14.0 16.0 20° AH 150M 8AR DLR, (1) 150W metal halide lamp, 11000 rated lumens, 1.1 s/mh, Test No. LTL19802 60° 2200 40° 4400 0° 0 5 15 25 35 45 55 65 75 85 90 Lumens 499 1531 2048 1696 992 272 80 39 15 Zone Lumens % Lamp 37.1 0° - 30° 4078.4 52.5 0° - 40° 5773.9 64.0 0° - 60° 7037.0 65.2 0° - 90° 7170.9 0.0 0.0 90° - 180° 0° - 180° 7170.9 *65.2 *Efficiency pf pc pw 0 1 2 3 4 5 6 7 8 9 10 RCR 80° Ave 5067 5158 5500 4518 2706 1299 240 73 37 13 6 80% 50% 30% 10% 78 78 78 71 70 68 66 63 60 60 57 54 56 52 48 51 47 44 48 43 40 44 40 37 41 37 34 39 34 31 36 32 29 20% 70% 50% 30% 10% 76 76 76 70 68 67 64 62 59 59 56 53 55 51 48 51 47 44 47 43 40 44 40 37 41 37 34 38 34 31 36 32 29 50% 50% 30% 10% 72 72 72 67 66 65 62 60 58 58 55 52 53 50 48 50 46 43 46 42 40 43 39 37 40 36 34 38 34 31 35 32 29 50% beam 58.3° 10% beam 88.6° Inital FC Mounting Center Beam Diameter FC Diameter FC Height 16.8 8.0 167.5 83.8 10.7 6.1 9.0 10.0 90.1 45.0 14.6 8.4 5.6 12.0 56.1 28.1 18.5 10.6 14.0 3.8 38.3 19.2 22.4 12.8 16.0 13.9 26.4 2.8 27.8 15.1 20° NOTES: 1. For electrical characteristics consult Technical Bulletins tab. 2. Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between laboratory data and actual field measurements. Dimensions and specifications are based on the most current available data and are subject to change without notice. DHID-220-D ©2011 Acuity Brands Lighting, Inc. All Rights Reserved.
© Copyright 2024