Download Report

GRACO
MODEL 800-118
-1
For use with all highpressure washers when
a variable spray pattern is desired. Also
used to apply chemicals on units that
have a downstream chemical
injection system.
Max. W o r k i n g Pressure 3500 PSI
/4 NPT
L O U I C K COUPLER
NOT INCLUDED
SPRAY TIP
NOT INCLUDED
INSTALLATION
OPERATION
The adjustable nozzle holder can be attached directlyto
/Cinch
the endof the spray gun want if thewand 1has
NPT male threads. It can also be attached to a male
quick couple (not supplied0 foreasy attachment to
spray gun wand.
With the control ring turned completely
counterclockwise (viewed from front) all water
pressure will be directed through the spraytip orifice. In
this position the normalspray pattern andtip capacity
(GPM) will take place.
Pick out the appropriate spray tip using the chart on the
back. Use pipe sealant or PTFE tape on all pipe
threads. Tighten all connections firmly.
To widen the.spray pattern simply turn the control ring
clockwise until the desired pattern is reached. This will
also cause a drop in pressure which canbe used to
activate a downstream chemicalinjector.
Stop pressure washer and relieve any back pressure in
the spray gun. Install adjustable nozzle with spray tip
and resume operation.
P/N 801-091
When full strength sprayingisdesired, turn control ring
counterclockwise to closed position.
when spray gun
! . .
IS In use. Be sure that thesafety latch on gun is in
the ON position before adjusting.
1
.
!
t
. .... .
RECOMMENDED SPRAY PIP CHART
* Chemical Tip
*' The first twodigits indicate the approximate
Spray angle.
THE GRACO WARRANTY
Graco Inc. warrants all equipment manufactured by it and bearingits name to be free fromdefects in
material and workmanship under normal use and SeNiCe. This warranty enends to the original
purchaser for a period of 12 months from the
date of purchase and applies only when the
equipment is
installed and operated in accordance wirh written factory recommendations. This warranty does not
cover damage or wear which. cn the reasonable judgment of Graco. arises from misuse. abrasion,
corrosion. negligence, accident, substitution of non-Graco parts, faulty installation brtampering.
This warranty is conditionedupon the prepaid return of the equipment claimed to be defective for
examination by Graco to verify the claimeddefect. H the claimed defen is verified, Graco will repair or
replace free of charge, any defenive parts. The equipmeot will be returned to the originalpurchaser
transportation prepaid. If inspectm of the equipment does not disclose any defect in workmanship or
material. rep+ will be made at a reasonable charge and return transportation will
be charged.
THIS LIMITED WARRANTYIS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES EXPRESS
OR IMPLIED) INCLUDING WARRANTY OF MERCHANTABILITY
OR WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE AND OF ANY NONCONTRACTUAL LlABlLlIES INCLUDING PRODUCT
LIABILITIES BASED ON NEGLIGENCE
OR STRICT LIABILITY. EVERY FORM OF LIABILITY
FOR DIRECT,
SPECIAL OR CONSEOUENIAL DAMAGES OR LOSS IS HPRESSLY EXCLUDED AND DENIED.
EQUIPMENTNOTCOVERED BY GRACO WARRANTY,Access~riesorcomponentsofequipmentsoldby
Graco that are not manufactured by Graco (such as electric motors. switches. hose, erc.) aresubject to
the warranty. if any. of their manufacturer. Graco will provide purchaser with reasonabie assistance in
making such claims.
.
..;.. ... .
. .: .,
. .i ..:
. ..
I
:
.
.
,.
Factory Branches: Atlanta. Dallas. Detroit, Los Angeler. West CaldwellIN.J.1
Subsidiary and Affiliate danpanies: Canada: England: Switzerland: France: Germany; HongKong: Japan
GRACO ERIC.
P.Q. BOX 144% RRBNNEAPOLBS, MM 5544Q-3444
PRINTED IN U.S.A. 801-746 4/84 (Rev. 8/84)
. .. . ... ,..... . .. . ..
., .
~.
.. . .~ .
.
. ..
.,
..,
,
.
.
. .'
~
_i
..
... ,
.. ~ . . . .
45-10067 REV
. ...
:..
"
. .
B
.., . . .
.. ...