21.005.057._* Jan 9, 2015 5:04:44 PM http://www.fipa.com/en_US/product/214171-13mm 21.005.057._* Suitable fittings Item no. Connection 270.134 M5-male 270.347 M5-female 270.104 M6-male 270.033 G1/8-male 270.478 G1/8-female Technical data Item no. 21.005.057.1/3 21.005.057.14 21.005.057.15/3 21.005.057.2/3 21.005.057.2/4 21.005.057.2AS Material / Color NBR (g) HNBR (ge) EPDM (gr) SI (g) SI (g) SI-AS (sw) 3 3 3 3 3 3 Number of folds 2.5 2.5 2.5 2.5 2.5 2.5 Hardness [° Shore A] 55 55 40 50 60 50 [mm] FIPA Inc. | 1855 Evans Road | Cary, NC 27513 / USA phone 1 (919) 651 9888 | fax 1 (919) 573 0871 | [email protected] Page 1 Vacuum technology | Overview of vacuum cup materials Overview of vacuum cup materials Short designation Material code Hardness [Shore A ± 5°] Commercial designation BR-AS 10-AS 9 15 60 Butadiene rubber, anti-static -58 / +212 ++ 50 - 60 Chloroprene Neoprene® -40 / +230 + Vistalon® -40 / +266 Viton® +14 / +446 CR EPDM FKM 7 Foam rubber 12 50 Commercial Short-term Abrasion Flexiname working resistance bility (example) temperature [°F] Oilresistance Fuel resistance Ozone and weathering resistance Acid resistance Leaching resistance + o o o + ++ + ++ o ++ + + + ++ o o ++++ +++ +++ o o ++++ ++++ ++++ +++ +++ 65 Fluor rubber (FPM) -30 / +320 ++ + ++++ ++ +++ + + -22 / +194 + + +++ + o o o -22 / +194 + + +++ ++ o o + -40 / +176 ++ ++++ o o o + ++ -40 / +176 ++ +++ o o o + ++ ++++ HNBR 14 55 Hydrogenated acrylonitrileTherban® butadiene rubber NBR 1 50 - 60 Nitrile rubber Nitrile rubber, anti-static Perbunan® NBR-AS 1-AS 50 - 70 NR 4 3 35 - 45 Natural rubber SMR 50 - 65 Natural rubber SMR 50 - 65 Polyurethane (EU/AU) Urepan -4 / +176 ++ + +++ ++ + o o -22/ +176 +++ ++ o o + + + NR PU 5 ® SBR 13 50 - 60 Styrenebutadiene-rubber Buna® (SBR) SI 8 2 35 - 45 Silicone rubber Elastosil® -40 / +392 o ++++ o o +++ o o 50 - 65 Silicone rubber Elastosil® -40 / +392 o +++ o o +++ o o -40 / +392 o +++ o o +++ o o SI SI-AS 2-AS 50 - 60 Silicone rubber, anti-static SI-FS 2-FS 17 19 40 Fluorosilicone -58 / +374 o +++ + + +++ ++ +++ 50 Thermoplastic elastomer +32 / +140 +++ ++ o o +++ o o +32 / +320 ++ + +++ ++ o + + +32 / +149 +++ o +++ ++ +++ o + 50 / +122 +++ ++++ +++ +++ ++ o +++ +32 / +140 +++ ++ + + ++ ++ ++ -40 / +176 ++++ + +++ ++ +++ + + Tepuflex® Thermalon® 60 TPU 18 60 Thermoplastic elastomer Varioflex® 16 30/60 Polyurethan (2 Shore Härten) Vinyl V 11 50 - 55 PVC (soft) Vulkollan® 75 ++++ = Excellent Elastollan ® Vulkollan® +++ = Very good ++ = Good + = Fair 0 = Low to satisfactory Ordering example: Flat vacuum cup made of silicone 50° Shore A Item No. 102.030.222._* > Add material code > 102.030.222.2 Note! > Depending on the application, vacuum cups are subject to mechanical and chemical stresses. The data serve therefore only as guidelines. > Special vacuum cups fitted with felt linings are extremely low-marking and can be deployed at temperatures up to a max. of 932 °F > Material colors may change, but the quality remains unaffected. > Material colors: bg = beige, bl = blue, br = brown, g = green, ge = yellow, gr = gray, or = orange, r = red, sw = black, tr = transparent, w = white FIPA Inc. Vacuum Technology I End-of-Arm-Tooling · 1855 Evans Road · Cary, NC 27513 / USA phone 1 (919) 651 9888 · fax 1 (919) 573 0871 · www.ﬁpa.com · sales.us@ﬁpa.com