Download Report

(4) Camera VideoTrak-IQ Card, in a single
slot Rack with plug power pack
MPS4 Power Card and (2) Camera VideoTrak-IQ
Card in a 2 slot VideoTrak-IQ Rack
MPS4 Power Card, (4) Camera Card, and (2)
Camera Card in a 3 slot VideoTrak-IQ Rack
Overview
Peek Traffic’s shelf mounted Detector racks are a new and innovative
option to detector card installation. The Peek Video Detector Racks
can help reduce cabinet clutter by allowing most connections to be
made through the backplane of the rack while taking up the space of
a single detector card.
www.peektraffic.com
With three rack options available, any one of these racks can
eliminate an entire shelf of loop detectors. New installations allow
for detector rack free cabinet designs, while upgrading shelf mount
loop detector cabinets to video detection is simplified.
MPS4 Rack Power Card Specifications
Custom Backplane Features
24VDC Loop Power in/out
Property
Description
Input Voltage
115 VAC 60 Hz
Input Fusing
500 mA
Output Voltage
24 VDC
Output Current
1200 mA (maximum)
Line Regulation
± 0.05% for 10% input Change
Load Regulation
± 0.05% for 50% load change
Short Circuit &
Overload protection
Automatic current limit / Feedback
Dimensions
4.5” H x 6.875”D x 2.25”W
Weight
2.58 lbs (1.2 kg)
Connector
Mates with Cinch Jones 50-44A-30M
Card edge connector
HD15 Pin I/O Card edge connections
(4) Outputs & (2) Inputs
BNC Camera
Rear Inputs
Power Cord
connection
D-Sub Video in Connection
Using (4) BNC Microcoax
(Compatible with older generation Peek products)
Ordering Information
Rack for one VideoTrak-IQ detection card,
Rack-mounted power supply included
82-1846
Rack for two VideoTrak-IQ detection cards,
Rack-mounted power supply included
82-1847
Rack for one VideoTrak-IQ detection card,
Plug power pack supply included
82-1848
MPS4 VTIQ (Power Supply Card)
82-1382
* A standard Peek two year warranty applies to all video products
2906 Corporate Way
Palmetto, FL 34221
(941) 845-1200
(800) 245-7660
www.peektraffic.com
Peek Traffic Corporation, a Signal Group Company
96-096-rev 5
The MPS4 Regulated
Power Supply provides a
consistent 24VDC to the
card rack for the VideoTrakIQ powered racks. This
power supply card is
included in the one and two
detection cards racks with a
slot for power.
MPS4 VTIQ 24V Rack Power Card
The information contained in this publication is presented for informational purposes
About Peek Traffic Corporation – Peek’s heritage goes back over
only, and while every effort has been made to ensure its accuracy, the information is
120 years, covering a broad range of quality turnkey traffic control
not to be construed as warranty or guarantee, express or implied, regarding the
products and services. Throughout the years, Peek’s products have
products or services described herein or their use or applicability. No license is granted
helped to make motorists around the world safer and their travels
by implication or otherwise to any of Peek Traffic’s intellectual property. Peek Traffic
more pleasant and efficient. This expertise, experience, and breadth of reserves the right to alter or revise any of its products or published technical data
product lines has made Peek one of the most respected and
related thereof at any time without notice.
recognized leaders in the traffic control marketplace.
©2011 Peek Traffic Corporation, a Signal Group Company