Hollywood Baroque

HollywoodBaroque
Installation Instructions
1. Before installing, first check to ensure you have received all the
package contents.
Bulb
( Quantity on Hollywood Baroque Mirror)
Mounting Strips
( Quantity and length base on
Hollywood Baroque Mirror)
Hollywood Baroque Mirror
Power Supply
2. Verify the wall is prepared correctly for installation. Determine the
type of screws or bolts needed for the wall surface you are
mounting to. Drill holes into the mounting strips. The holes should be
drilled at the location that is best for the installation of your
Hollywood Baroque Mirror.
Then, install mounting strips to the wall. Ensure the mounting strips
are securely fastened to the wall. (Note: It is the installers
responsibility that all electrical,
audio/visual, and framing
construction is code
compliant.)
5’ Power Extension Cord
3. Lay the Hollywood Baroque Mirror flatwise on the flat padded
surface to connect the cable to the ports. Then put the Mirror
up, install some bulbs and test the power source first. (Note:
when doing this please make sure that the mirror glass is
protected. )
4. Hang the Hollywood Baroque Mirror, we suggest to set up the
bulbs first, if some are too high or difficeult to install. Then lift the
Hollywood Baroque Mirror and securely engage the mounting
strips that are attached to the back side of the mirror to the
mounting strips on the wall.
(Note:It is recommended that
3+ persons assit in the
installation of the Hollywood
Baroque Mirror).
5. Enjoy your new Hollywood Baroque Mirror!
East Coast Sales Division
1181 S Rogers Cir. Unit 20
Boca Raton, FL 333487
West Coast Headquarters
1250 Oakmead Pkwy. Suite 210
Sunnyvale CA 94085, USA
Grand Mirrors Inc.
Email: [email protected]
Website:www.grandmirrors.com
Due to different local taxes, import duties, transportation methods, payment methods, warranty
regulations by laws, installed components,the price for our products may vary per country.
Copyright 2015 © Grand Mirrors Inc.