1. No category

QUICK-GRIP™ CNC COLLET CHUCK
ACCESSORIES
Quick-Grip™ Collet Installation Tool
q Easy to use tool enables collets to be changed
Royal Quick-Grip Collet
Installation Tool
in seconds.
q Simply insert the steel pins into the collet face
holes and squeeze main trigger to collapse collet.
FITS CHUCK MODEL
PART NUMBER
PRICE
QG-42
QG-65
QG-80
44097
44098
44099
$550
q Once the collet is positioned within the chuck,
squeeze the trigger lock to expand and release.
550
550
q Heavy-duty construction for durability.
Quick-Grip™ Ejectors
q Ejectors are used in sub-spindle applications on Accu-Length™ Chucks to
push finished workpieces into the part catcher upon completion.
q A hardened plunger rod and a bronze bushing work together to provide
smooth, consistent operation.
q New design enables tip to be changed without removing ejector assembly
from the chuck.
q Available in standard and compact models:
– Standard Model – for parts ranging in size from 0.81" to 3.25" dia.
– Compact Model – for parts ranging in size from 0.18" to 1.25" dia.
q Easily customizable as workpiece configurations require.
For an alternative solution to an ejector, check out the Royal Grippex CoolantActuated Bar Puller. The Grippex, when fitted with special jaws, can be used to
pull finished parts from a sub-spindle, eliminating the need for an ejector and
freeing up the spindle bore to swallow longer parts.
Royal Quick-Grip™ Ejectors
FITS ACCU-LENGTH™
CHUCK MODEL
QG-42
QG-65
QG-80
QG-42
QG-65
QG-80
EJECTOR
STYLE
PART DIAMETER
RANGE
PART
NUMBER
PRICE
Standard
Standard
Standard
Compact
Compact
Compact
0.81"– 1.63"
0.81"– 2.63"
0.81"– 3.25"
0.18"– 1.25"
0.18"– 1.25"
0.18"– 1.25"
44040
44041
44042
44043
44044
44045
$698
709
719
604
614
625
Quick-Grip™ Standard Stops
q A stop is used for accurate z-axis positioning
of short workpieces within a collet.
q Stop rod length is easily adjusted.
q The stop locates against a shoulder within the chuck
body and is held in place with radially-located screws.
q All Royal stops can be installed with chuck mounted to
the spindle.
q For use with Royal Accu-Length™ and Pull-to-a-Stop
Quick-Grip™ Collet Chuck models.
14
Royal Quick-Grip™ Standard Stops
FITS
CHUCK
MODEL
QG-42
QG-65
QG-80
MAX THROAT DEPTH*
ACCU-LENGTH
PULL-TO-A-STOP
CHUCK MODELS
CHUCK MODELS
2.03
2.47
2.51
2.89
3.33
3.33
* Measured from collet face.
TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
PART
NUMBER
PRICE
44080
44081
44084
$180
205
233
QUICK-GRIP™ CNC COLLET CHUCK
ACCESSORIES
Quick-Grip™ Extra-Depth Stops
q A stop is used for accurate z-axis positioning of a workpiece within a collet.
q Royal Quick-Grip™ extra-depth stops have a greater throat depth than our standard stops, enabling
longer parts to swallowed while minimizing protrusion beyond the collet face.
q As with our standard QG stops, rod length is easily adjusted and the entire assembly can be installed
with the chuck mounted to the spindle.
q For use with Royal Accu-Length™ and Pull-to-a-Stop Quick-Grip™ Collet Chuck models.
Royal Quick-Grip™ Extra-Depth Stops
FITS
CHUCK
MODEL
MAX THROAT DEPTH*
ACCU-LENGTH
PULL-TO-A-STOP
CHUCK MODELS
CHUCK MODELS
QG-42
QG-65
QG-65
QG-80
QG-80
5.00
6.00
6.00
6.00
6.00
MAX
PART
DIAMETER
MIN
DRAWTUBE
I.D.
PART
NUMBER
PRICE
1.25
1.25
2.25
2.00
2.75
1.66
1.66
2.73
2.48
3.23
44802
44804
44806
44808
44810
$319
361
361
435
435
5.86
6.86
6.86
6.82
6.82
* Measured from collet face.
Hardened and Ground Adapter Plates
q Adapter plates offer the flexibility to mount
collet chucks and 3-jaw chucks to a wider
range of spindles:
Proudly
Made
in U.S.A.
- Mount a larger chuck on a smaller spindle
for increased capacity.
- Mount a smaller chuck on a larger
spindle for increased tool clearance and
higher speeds.
q All Royal adapter plates are hardened to
Rc 61-63.
q High accuracy – 0.0002" TIR guaranteed.
q Metric screws included for mounting plate
to spindle.
q Drive button included on all plates.
Royal Adapter Plates
SPINDLE
MOUNT
CHUCK
MOUNT
PLATE
DIAMETER
PLATE
THICKNESS
THRU-HOLE
DIA.
SPINDLE
MOUNTING
BOLTS
CHUCK
MOUNT
THREADS
PART
NUMBER
PRICE
A2-5
A2-6
A2-6
A2-8
A2-8
110MM
140MM
A2-6
A2-6
A2-8
A2-6
A2-8
A2-5
A2-6
6.68
6.68
8.68
8.25
8.69
5.31
6.68
1.00
1.25
1.00
1.75
2.00
0.75
1.00
2.63
3.56
3.75
3.44
4.76
2.00
3.00
M-10
M-12
M-12
M-16
M-16
M-10
M-10
M-12
M-12
M-16
M-12
M-16
M-10
M-12
44000
44009
44004
44010
44011
44006
44008
$1,180
1,048
1,363
1,363
1,436
1,021
1,212
Other configurations available. Contact a Royal Products applications engineer at 1-800-645-4174
with your requirements.
TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
15
LOW-PROFILE CNC COLLET CHUCK
ACCESSORIES
Ejectors
Royal Ejectors for
Low-Profile Collet Chucks
q Ejectors are used in sub-spindle applications
q A hardened plunger rod and a bronze
to push finished workpieces into the part
catcher upon completion.
bearing work together to provide smooth,
consistent operation.
q Pusher head (shown) can be adjusted or
q Spring is encased inside of body for protection.
modified as applications require (head not
included with 5C, 16C, or 3J models).
FITS CHUCK MODEL
PART NUMBER
PRICE
5C Accu-Length™
16C Accu-Length™
3J Accu-Length™
S-20 Accu-Length™
S-26 Accu-Length™
S-30 Accu-Length™
45145
45146
45147
45148
45149
45150
$280
309
309
618
628
669
For an alternative solution to an ejector, check out the Royal Grippex Coolant-Actuated Bar Puller. The Grippex, when fitted with special robot gripper jaws,
can be used to pull finished parts from a sub-spindle, eliminating the need for an ejector and freeing up the spindle bore to swallow longer parts.
Collet Stops
Royal Collet Stops for
Low-Profile Collet Chucks
q A collet stop is used for accurate z-axis positioning
of short workpieces within a collet.
q Stop rod length is easily adjusted.
q Assembly screws directly into rear of collet.
FITS CHUCK MODEL
PART NUMBER
PRICE
5C Accu-Length™ and Pullback
16C Accu-Length™ and Pullback
3J Accu-Length™ and Pullback
S-20 Accu-Length™
S-26 Accu-Length™
S-30 Accu-Length™
S-40 Accu-Length™
20030
45151
45152
45153
45154
45155
45158
$15
144
144
144
151
169
180
Heavy-Duty Collet Wrenches
Royal Heavy-Duty Collet Wrenches
q Heavy-duty one-piece head – pins won't shear off.
q Comfortable knurled handle offers superior grip
and makes collet installation a breeze.
q Cross-drilled hole in handle allows a screwdriver
to be used as a lever for hard-to-remove collets.
q Available for all popular collet models.
COLLET
STYLE
5C
16C/3J
16C/3J
S-20 Master
S-26 Master
S-30 Master
S-40 Master
NUMBER OF
COLLET SLOTS
3
3
4
3
4
4
4
PART
NUMBER
PRICE
45187
45188
45189
45190
45191
45192
45193
$110
110
110
153
153
153
229
TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
23