Origami Boat (fun thing).ai

Origami Boat
Fun things to do: page 1 of 2
What you need
A piece of
A4 paper
Sticky Tape
Fold the paper in half to create a long thin
strip with a central crease. Unfold. Fold
both outside length edges in to the centre
crease. You should now have a 30 cm long
thin concertina.
Place the concertina flat on a table with
the edge with two folds away from you.
Fold down the top ends.
Turn over and repeat on the
other side.
1
2
3
www.wow4water.net
Origami Boat
Fun things to do: page 2 of 2
4
Fold both the top corners down
again to create two further flaps
about 2 cm deep. Score these folds
with your thumb nail so the flaps
stay flat.
5
Turn over and repeat on the
other side (apply sticky tape at x
if you can’t get the flaps to lie flat).
x
6
You now need to turn the paper inside
out. Carefully move the edges away from
each other on the long side at the bottom
to create an upside-down boat shape.
Then press the top corners downwards
and inwards with your thumbs.
Coax out the sides to produce a shallow boat shape, taking
care not to tear the paper as you push the boat inside out.
Congratulations! You should now have a long shallow
origami boat.
www.wow4water.net