CLD-DS113 Rev 0
Product family data sheet
Cree® XLamp® MHD-G LEDs
Product Description
FEATURES
Table of Contents
The XLamp® MHD-G LED is a new
• Flexible 18‑V or 36‑V options
Characteristics................................ 2
generation
• Maximum drive current:
Flux Characteristics, EasyWhite®
that
of
delivers
high‑power
a
more
LED
effective
1000 mA (18 V), 500 mA (36 V)
Order Codes and Bins...................... 3
way to achieve low‑cost systems
• Viewing angle: 115°
Relative Spectral Power Distribution... 5
than
• Available in 70‑CRI, 80‑CRI and
Relative Flux vs. Junction
mid‑power
(MP)
LEDs.
Built using Cree’s high‑reliability
ceramic‑package
technology,
the XLamp MHD-G LED is able to
operate at higher temperatures
than MP LEDs with no reduction
in
rated
lifetime,
enabling
an
impressive 60% reduction in heat
sink size and cost. Using many
90‑CRI options
Temperature................................... 5
• Unlimited floor life at
Electrical Characteristics................... 6
≤ 30 ºC/85% RH
Relative Flux vs. Current.................. 7
• Reflow solderable - JEDEC
J‑STD‑020C
Relative Chromaticity vs. Current....... 8
Relative Chromaticity vs.
• Electrically neutral thermal path
Temperature................................... 9
• UL® recognized component
Typical Spatial Distribution................ 9
(E349212)
Thermal Design..............................10
times fewer LEDs than MP LEDs to
Performance Groups – Luminous
achieve the same performance, the
Flux..............................................11
XLamp MHD-G LED is optimized to
Performance Groups – Chromaticity..11
simplify LED system designs for
Cree’s Standard White Chromaticity
directional
Regions Plotted on the 1931 CIE
applications.
and
semi‑directional
Curve...........................................12
Bin and Order Code Formats............13
Reflow Soldering Characteristics.......14
Notes............................................15
Mechanical Dimensions...................16
WWW.CREE.COM/XLAMP
Electrical Configuration....................17
Tape and Reel................................18
Packaging......................................19
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®,
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
xlamp ® mHD-G leds
Characteristics
MHD-G 18‑V/36‑V LEDs are tested and binned in production in the 36‑V configuration. See the Mechanical Dimensions
section on page 16 for pad layout options.
Characteristics
Unit
Thermal resistance, junction to solder point
°C/W
2.6
degrees
115
Temperature coefficient of voltage (18 V)*
mV/°C
-8.5
Temperature coefficient of voltage (36 V)
mV/°C
-17
Viewing angle (FWHM)
ESD withstand voltage (HBM per Mil-Std-883D)
Minimum
Typical
Maximum
V
8000
DC forward current (18 V)*
mA
1000
DC forward current (36 V)
mA
500
Reverse current (18 V, 36 V)*
mA
-0.1
Forward voltage (18 V, @ 700 mA, 85 °C)*
V
18.2
20
Forward voltage (36 V, @ 350 mA, 85 °C)
V
36.4
40
LED junction temperature
°C
150
* Data for the 18‑V configuration is calculated and for reference only.
®
®
®
Copyright ©
toto
change
without
notice.
Cree
, the
and EasyWhite
aretrademarks
registered
© 2015
2010 Cree,
Cree, Inc.
Inc. All
Allrights
rightsreserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subject
change
without
notice.
Cree,
theCree
Creelogo,
logoXLamp
and XLamp
are registered
trademarks
of Cree, Inc.of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
xlamp ® mHD-G leds
Flux Characteristics, EasyWhite® Order Codes and Bins
The following table provides order codes for XLamp MHD-G LEDs. For a complete description of the order code
nomenclature, please see the Bin and Order Code Formats section (page 13).
Test condition: TJ = 85 °C, 36 V, IF = 350 mA
Reference condition: TJ = 85 °C, 18 V, IF = 700 mA
Nominal
CCT
CRI
Min
70
6500 K
Minimum
Luminous Flux
Group
Flux (lm)
M2
1380
M4
1485
N2
1590
M2
1380
2-Step
Group
Order Code
3-Step
Group
Order Code
70
70
5000 K
Group
Order Code
MHDGWT-0000000N0BM265E
65E
MHDGWT-0000000N0BM465E
MHDGWT-0000000N0BN265E
80
5700 K
5-Step
65E
MHDGWT-0000000N0HM265E
M4
1485
MHDGWT-0000000N0HM465E
M2
1380
MHDGWT-0000000N0BM257E
M4
1485
N2
1590
MHDGWT-0000000N0BN257E
M2
1380
MHDGWT-0000000N0BM250E
M4
1485
N2
1590
M2
1380
M4
1485
MHDGWT-0000000N0HM450G
K2
1200
MHDGWT-0000000N0UK250G
K4
1290
80
57E
50E
MHDGWT-0000000N0BM450E
MHDGWT-0000000N0BN250E
50G
90
MHDGWT-0000000N0BM457E
50G
MHDGWT-0000000N0HM250G
50E
MHDGWT-0000000N0HM250E
MHDGWT-0000000N0HM450E
MHDGWT-0000000N0UK450G
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 15).
• Cree XLamp MHD-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher
than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin
restrictions specified by the order code.
®
®
®
Copyright ©
toto
change
without
notice.
Cree
, the
and EasyWhite
aretrademarks
registered
© 2015
2010 Cree,
Cree, Inc.
Inc. All
Allrights
rightsreserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subject
change
without
notice.
Cree,
theCree
Creelogo,
logoXLamp
and XLamp
are registered
trademarks
of Cree, Inc.of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
xlamp ® mHD-G leds
Flux Characteristics, EasyWhite® Order Codes and Bins - Continued
Nominal
CCT
CRI
Min
Minimum
Luminous Flux
Group
Flux (lm)
M2
1380
M4
1485
K4
1290
2-Step
Group
Order Code
3-Step
Group
Order Code
70
4000 K
40H
3000 K
40G
MHDGWT-0000000N0HM240H
K2
1200
MHDGWT-0000000N0UK240H
K4
1290
MHDGWT-0000000N0UK440H
K2
1200
MHDGWT-0000000N0HK235H
K4
1290
M2
1380
MHDGWT-0000000N0HM235H
MHDGWT-0000000N0HM235G
J4
1120
MHDGWT-0000000N0UJ435H
MHDGWT-0000000N0UJ435G
K2
1200
MHDGWT-0000000N0UK235H
K2
1200
MHDGWT-0000000N0HK230H
K4
1290
M2
1380
MHDGWT-0000000N0HM230H
MHDGWT-0000000N0HM230G
J4
1120
MHDGWT-0000000N0UJ430H
MHDGWT-0000000N0UJ430G
K2
1200
K2
1200
40H
35H
35H
90
30H
30H
80
27H
MHDGWT-0000000N0HK435H
MHDGWT-0000000N0HK430H
MHDGWT-0000000N0UK230H
MHDGWT-0000000N0HK227H
K4
1290
MHDGWT-0000000N0HK427H
J2
1040
MHDGWT-0000000N0UJ227H
J4
1120
2700 K
90
27H
MHDGWT-0000000N0UJ427H
40G
Order Code
MHDGWT-0000000N0BM240E
MHDGWT-0000000N0BM440E
MHDGWT-0000000N0HK440G
1380
90
80
MHDGWT-0000000N0HK440H
M2
90
3500 K
Group
40E
80
80
5-Step
MHDGWT-0000000N0HM240G
MHDGWT-0000000N0UK240G
MHDGWT-0000000N0UK440G
MHDGWT-0000000N0HK235G
35G
35G
MHDGWT-0000000N0HK435G
MHDGWT-0000000N0UK235G
MHDGWT-0000000N0HK230G
30G
30G
27G
27G
MHDGWT-0000000N0HK430G
MHDGWT-0000000N0UK230G
MHDGWT-0000000N0HK227G
MHDGWT-0000000N0HK427G
MHDGWT-0000000N0UJ227G
MHDGWT-0000000N0UJ427G
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 15).
• Cree XLamp MHD-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher
than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin
restrictions specified by the order code.
®
®
®
Copyright ©
toto
change
without
notice.
Cree
, the
and EasyWhite
aretrademarks
registered
© 2015
2010 Cree,
Cree, Inc.
Inc. All
Allrights
rightsreserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subject
change
without
notice.
Cree,
theCree
Creelogo,
logoXLamp
and XLamp
are registered
trademarks
of Cree, Inc.of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
xlamp ® mHD-G leds
Relative Spectral Power Distribution
Relative Spectral Power Distribution
100%
Relative Spectral Power
90%
80%
70%
60%
6500 K, 80 CRI
50%
5000 K, 80 CRI
40%
3000 K, 80 CRI
30%
20%
10%
0%
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Relative Flux Output vs. Junction Temperature
Relative Flux vs. Junction Temperature
Test condition: 18 V (for reference), If = 700 mA; 36 V, IF = 350 mA
Relative Luminous Flux
120%
100%
80%
60%
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
®
®
®
Copyright ©
toto
change
without
notice.
Cree
, the
and EasyWhite
aretrademarks
registered
© 2015
2010 Cree,
Cree, Inc.
Inc. All
Allrights
rightsreserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subject
change
without
notice.
Cree,
theCree
Creelogo,
logoXLamp
and XLamp
are registered
trademarks
of Cree, Inc.of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
xlamp ® mHD-G leds
Electrical Characteristics (TJ = 85 °C)
1000
Forward Current (mA)
900
800
700
600
500
18 V
400
300
200
100
Electrical 0Characteristics
(Tj
16.0
16.5
17.0
17.5 = 85ºC)
18.0
18.5
19.0
Forward Voltage (V)
500
Forward Current (mA)
450
400
350
300
250
36 V
200
150
100
50
0
32
33
34
35
36
37
38
Forward Voltage (V)
®
®
®
Copyright ©
toto
change
without
notice.
Cree
, the
and EasyWhite
aretrademarks
registered
© 2015
2010 Cree,
Cree, Inc.
Inc. All
Allrights
rightsreserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subject
change
without
notice.
Cree,
theCree
Creelogo,
logoXLamp
and XLamp
are registered
trademarks
of Cree, Inc.of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
xlamp ® mHD-G leds
Relative Flux vs. Current (TJ = 85 °C)
Relative Luminous Flux
140%
120%
100%
80%
18 V
60%
40%
20%
0%
0
100
200
300
400
500
600
700
800
Relative Intensity vs. Current (Tj = 85ºC)
900
1000
Forward Current (mA)
Relative Luminous Flux
140%
120%
100%
80%
36 V
60%
40%
20%
0%
0
50
100
150
200
250
300
350
400
450
500
Forward Current (mA)
®
®
®
Copyright ©
toto
change
without
notice.
Cree
, the
and EasyWhite
aretrademarks
registered
© 2015
2010 Cree,
Cree, Inc.
Inc. All
Allrights
rightsreserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subject
change
without
notice.
Cree,
theCree
Creelogo,
logoXLamp
and XLamp
are registered
trademarks
of Cree, Inc.of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
xlamp ® mHD-G leds
Relative Chromaticity vs. Current (Warm White)
0.015
18 V
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
100
200
300
400
500
600
700
800
900
1000
Current (mA)
0.015
36 V
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
50
100
150
200
250
300
350
400
450
500
Current (mA)
®
®
®
Copyright ©
toto
change
without
notice.
Cree
, the
and EasyWhite
aretrademarks
registered
© 2015
2010 Cree,
Cree, Inc.
Inc. All
Allrights
rightsreserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subject
change
without
notice.
Cree,
theCree
Creelogo,
logoXLamp
and XLamp
are registered
trademarks
of Cree, Inc.of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
xlamp ® mHD-G leds
Relative Chromaticity vs. Temperature (Warm White)
Test condition: 18 V (for reference), If = 700 mA; 36 V, IF = 350 mA
0.015
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
25
50
75
100
125
150
Tsp (°C)
Typical Spatial Distribution
Far Field
Test condition: 18 V (for reference), If = 700 mA; 36 V, IF = 350 mA
Relative Luminous Intensity
100%
80%
60%
40%
20%
-90
-70
-50
-30
0%
-10
10
30
50
70
90
Angle (º)
®
®
®
Copyright ©
toto
change
without
notice.
Cree
, the
and EasyWhite
aretrademarks
registered
© 2015
2010 Cree,
Cree, Inc.
Inc. All
Allrights
rightsreserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subject
change
without
notice.
Cree,
theCree
Creelogo,
logoXLamp
and XLamp
are registered
trademarks
of Cree, Inc.of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
xlamp ® mHD-G leds
Thermal Design
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is
crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to
ambient in order to optimize lamp life and optical characteristics.
1100
Maximum Current (mA)
1000
18 V
900
800
700
600
500
400
Rj-a = 4 °C/W
300
Rj-a = 5 °C/W
200
Rj-a = 6 °C/W
100
Rj-a = 7 °C/W
0
0
20
40
60
80
100
120
140
Ambient Temperature (ºC)
Thermal Design
550
Maximum Current (mA)
500
36 V
450
400
350
300
250
200
Rj-a = 4 °C/W
150
Rj-a = 5 °C/W
100
Rj-a = 6 °C/W
50
Rj-a = 7 °C/W
0
0
20
40
60
80
100
120
140
Ambient Temperature (ºC)
®
®
®
Copyright ©
toto
change
without
notice.
Cree
, the
and EasyWhite
aretrademarks
registered
© 2015
2010 Cree,
Cree, Inc.
Inc. All
Allrights
rightsreserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subject
change
without
notice.
Cree,
theCree
Creelogo,
logoXLamp
and XLamp
are registered
trademarks
of Cree, Inc.of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
xlamp ® mHD-G leds
Performance Groups – Luminous Flux (TJ = 85 °C)
XLamp MHD-G LEDs are tested for luminous flux and placed into one of the following bins.
Group Code
Min. Luminous Flux
Max. Luminous Flux
J2
1040
1120
J4
1120
1200
K2
1200
1290
K4
1290
1380
M2
1380
1485
M4
1485
1590
N2
1590
1710
N4
1710
1830
Performance Groups – Chromaticity
XLamp MHD-G LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding
coordinates.
EasyWhite Color Temperatures – 2-Step
Code
40H
35H
30H
27H
CCT
4000 K
3500 K
3000 K
2700 K
x
y
0.3777
0.3739
0.3797
0.3816
0.3861
0.3855
0.3838
0.3777
0.4022
0.3858
0.4053
0.3942
0.4125
0.3977
0.4091
0.3891
0.4287
0.3975
0.4328
0.4064
0.4390
0.4086
0.4347
0.3996
0.4524
0.4048
0.4574
0.4140
0.4633
0.4154
0.4581
0.4062
®
®
®
Copyright ©
toto
change
without
notice.
Cree
, the
and EasyWhite
aretrademarks
registered
© 2015
2010 Cree,
Cree, Inc.
Inc. All
Allrights
rightsreserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subject
change
without
notice.
Cree,
theCree
Creelogo,
logoXLamp
and XLamp
are registered
trademarks
of Cree, Inc.of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
xlamp ® mHD-G leds
Performance Groups - Chromaticity (Tj = 85 °C) - Continued
EasyWhite Color Temperatures – 3-Step Ellipse
Major Axis
Minor Axis
x
y
a
b
Rotation
Angle (°)
5000 K
0.3447
0.3553
0.00840
0.00312
65.0
40G
4000 K
0.3818
0.3797
0.00939
0.00402
53.7
35G
3500 K
0.4073
0.3917
0.00927
0.00414
53.2
30G
3000 K
0.4338
0.4030
0.00834
0.00408
53.2
27G
2700 K
0.4577
0.4099
0.00834
0.00420
48.5
Major Axis
Minor Axis
a
b
Rotation
Angle (°)
Bin Code
CCT
50G
Center Point
EasyWhite Color Temperatures – 5-Step Ellipse
Bin Code
Center Point
CCT
x
y
65E
6500 K
0.3123
0.3282
0.01110
0.00550
61.0
57E
5700 K
0.3287
0.3417
0.01230
0.00600
72.0
50E
5000 K
0.3447
0.3553
0.01400
0.00520
65.0
40E
4000 K
0.3818
0.3797
0.01565
0.00670
53.7
Cree’s Standard White Chromaticity Regions Plotted on the 1931 CIE Curve
0.44
ANSI C78.377 Quadrangle
0.43
EasyWhite 5-Step
0.42
EasyWhite 3-Step
0.41
EasyWhite 2-Step
2700K
3000K
3500K
4000K
0.40
4500K
0.39
5000K
0.38
CCy
0.37
5700K
0.36
6500K
0.35
0.34
8000K
0.33
0.32
0.31
0.30
0.29
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.27
0.28
CCx
®
®
®
Copyright ©
toto
change
without
notice.
Cree
, the
and EasyWhite
aretrademarks
registered
© 2015
2010 Cree,
Cree, Inc.
Inc. All
Allrights
rightsreserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subject
change
without
notice.
Cree,
theCree
Creelogo,
logoXLamp
and XLamp
are registered
trademarks
of Cree, Inc.of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
xlamp ® mHD-G leds
Bin and Order Code Formats
Bin codes and order codes for MHD-G LEDs are configured in the following manner:
Order Code
Bin Code
Series
MHDG = MHD-G
Series
MHDG = MHD-G
Internal code
Chromaticity bin
CRI Specification
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Vf class: N0 = 18-V/36-V class
Chromaticity region
SSSSCC-HHHH-HHHGGNFFDDD
Flux
Vf class: N0 = 18-V/36-V class
Color
WT = White
Internal code
SSSSCC-WWW-FF-GGN-AAAAA
CRI Specification
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Flux bin
Color
WT = White
®
®
®
Copyright ©
toto
change
without
notice.
Cree
, the
and EasyWhite
aretrademarks
registered
© 2015
2010 Cree,
Cree, Inc.
Inc. All
Allrights
rightsreserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subject
change
without
notice.
Cree,
theCree
Creelogo,
logoXLamp
and XLamp
are registered
trademarks
of Cree, Inc.of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
xlamp ® mHD-G leds
Reflow Soldering Characteristics
In testing, Cree has found XLamp MHD-G LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed
below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the
manufacturer of solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
Profile Feature
Lead-Based Solder
Lead-Free Solder
3 °C/second max.
3 °C/second max.
Preheat: Temperature Min (Tsmin)
100 °C
150 °C
Preheat: Temperature Max (Tsmax)
150 °C
200 °C
60-120 seconds
60-180 seconds
183 °C
217 °C
60-150 seconds
60-150 seconds
215 °C
260 °C
10-30 seconds
20-40 seconds
6 °C/second max.
6 °C/second max.
6 minutes max.
8 minutes max.
Average Ramp-Up Rate (Tsmax to Tp)
Preheat: Time (tsmin to tsmax)
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
Peak/Classification Temperature (Tp)
Time Within 5 °C of Actual Peak Temperature (tp)
Ramp-Down Rate
Time 25 °C to Peak Temperature
Note: All temperatures refer to the topside of the package, measured on the package body surface.
®
®
®
Copyright ©
toto
change
without
notice.
Cree
, the
and EasyWhite
aretrademarks
registered
© 2015
2010 Cree,
Cree, Inc.
Inc. All
Allrights
rightsreserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subject
change
without
notice.
Cree,
theCree
Creelogo,
logoXLamp
and XLamp
are registered
trademarks
of Cree, Inc.of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
xlamp ® mHD-G leds
Notes
Measurements
The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications
only and solely represent product measurements as of the date of shipment. These measurements will change over
time based on a number of factors that are not within Cree’s control and are not intended or provided as operational
specifications for the products. Calculated values are provided for informational purposes only and are not intended as
specifications.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED
lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80
results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing
and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient
temperature, and drive current affect the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately
prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp MHD-G LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have
unlimited floor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree
recommends sealing any unsoldered LEDs in the original MBP.
UL® Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical
enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and
eye safety, please refer to the LED Eye Safety application note.
®
®
®
Copyright ©
toto
change
without
notice.
Cree
, the
and EasyWhite
aretrademarks
registered
© 2015
2010 Cree,
Cree, Inc.
Inc. All
Allrights
rightsreserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subject
change
without
notice.
Cree,
theCree
Creelogo,
logoXLamp
and XLamp
are registered
trademarks
of Cree, Inc.of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
xlamp ® mHD-G leds
Mechanical Dimensions
All measurements are ±.13 mm unless otherwise indicated.
6.70
.50
Anode
Side
7.00
Cathode
Side
4.30
.70
6.70
6.70
.35
±0.2mm
.50
.50
4.30
4.30
7.00
7.00
.70
7.00
.80
6.70
.35
±0.2mm
.35
±0.2mm
3.10
7.00
7.00
.80
.80
.71
3.10
3.10
6.69
0.75
±0.2mm
Top View
18-V Configuration
.56
6.70
.70
.70
0.75
±0.2mm
0.75
.56
±0.2mm
6.69
.70
.70
.71
.71
3.75
6.69
2.95
Bottom View
Side
View
6.55
.70
.70
6.70
.56
6.55
6.55
3.75
.56
2.88
3.75
.56
.56
6.56
.80
2.95
.80
2.95
7.00
.70
7.00
.84
RECOMMENDED
.70STENCIL PATTERN
.70
.84
.84
.84
Recommended Stencil Pattern
3.10
(Shaded Area Is Open)
.70
6.69
.70
.70
.70
.70
.56
.71
6.55
6.55
3.75.56
3.75
.80
.80
.70
.70
.80
.80
2.95
.70
2.88
2.88
6.56
6.56
.80
.56
.56
2.95
6.70
3.10
0.75
±0.2mm
0.75
±0.2mm
.70
6.70
.84
RECOMMENDED STENCIL PATTERN
RECOMMENDED STENCIL PATTERN
36-V Configuration
6.69
.80
.80
.70
.71
2.95
4.30
.70
.80
.80
.35
±0.2mm
RECOMMENDED
PCB SOLDER PAD
Recommended
PCB
Solder
Pad
RECOMMENDED
PCB SOLDER
PAD
6.70
6.70
6.70
.50
4.30
.80
.80
.84
RECOMMENDED PCB SOLDER PAD
.50
7.00
7.00
.35
±0.2mm
.70
2.88
2.88
6.56
6.56
.80
.80
.70
.80
6.70
6.70
2.95
2.88
.70
RECOMMENDED
PCB SOLDER PAD
Recommended
PCB
Solder
Pad
RECOMMENDED
PCB SOLDER
PAD
.84
.80
.80
.80
2.88
.84
.84
.84
Recommended Stencil Pattern
(Shaded Area Is Open)
RECOMMENDED STENCIL PATTERN
RECOMMENDED STENCIL PATTERN
®
®
®
Copyright ©
toto
change
without
notice.
Cree
, the
and EasyWhite
aretrademarks
registered
© 2015
2010 Cree,
Cree, Inc.
Inc. All
Allrights
rightsreserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subject
change
without
notice.
Cree,
theCree
Creelogo,
logoXLamp
and XLamp
are registered
trademarks
of Cree, Inc.of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
POSITIVE (+)
xlamp ® mHD-G leds
NEGATIVE (-)
Electrical Configuration
36 V
18 V
POSITIVE (+)
NEGATIVE (-)
POSITIVE (+)
NEGATIVE (-)
18-V Configuration
36-V Configuration
18 V
NEGATIVE (-)
POSITIVE (+)
®
®
®
Copyright ©
toto
change
without
notice.
Cree
, the
and EasyWhite
aretrademarks
registered
© 2015
2010 Cree,
Cree, Inc.
Inc. All
Allrights
rightsreserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subject
change
without
notice.
Cree,
theCree
Creelogo,
logoXLamp
and XLamp
are registered
trademarks
of Cree, Inc.of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
xlamp ® mHD-G leds
Tape and Reel
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
All dimensions in mm.
2.00
[.079]
P2
1.50
+.10
-.00
Do
4.00
[
.0591
[.157]
Po
+.0039
-.0000
1.75
E1
]
[.069]
3.0°
7.50
16.00 [.630]
NOMINAL
[.295]F
14.25
[.561]
E2
1.50
D1
MIN
12.00
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTANED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
OF CREE INC.
5
7.60
[.059]
[.472]
P
.30
T
3.0°
6
7.60
[.299]
Bo
16.30 [.642]
MAX
W
4
1.70
Ko
[.012]
[.067]
3
2
1000 LEDs per reel
[.299]
1
2400-00009
INDEX
QTY
ITEM
COMMENTS
1
2
1
2
2400-00009-CORE
2400-00009-REEL
D
D
12.4
+.2
.0
MEASURED AT HUB
C
330
+.25
-.75
C
16.4
+0.2
.0
MEASURED AT HUB
1.9±.4
21 ±.4
13.1 ±.2
B
B
12.4
+1.0
-.5
MEASURED AT EDGE
60°
60°
REVISONS
REV
DESCRIPTION
DRAWN BY
A
BY
DATE
APP'D
®
®
®
Copyright ©
toto
change
without
notice.
Cree
, the
and EasyWhite
aretrademarks
registered
© 2015
2010 Cree,
Cree, Inc.
Inc. All
Allrights
rightsreserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subject
change
without
notice.
Cree,
theCree
Creelogo,
logoXLamp
and XLamp
are registered
trademarks
of Cree, Inc.of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
UNLESS OTHERWISE SPECIFIED
THIRD ANGLE PROJECTION
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX ±
.01
.XXX ±
.005
X°
±
.5 °
FOR SHEET METAL PARTS ONLY
D. CRONIN
CHECK
DATE
4600 Silicon Drive
Durham, N.C 27703
09/29/09
DATE
-APPROVED
-MATERIAL
18
Phone (919) 313-5300
--
Fax (919) 313-5558
DATE
--
TITLE
REEL, 13" X 12MM, 3 PIECE SNAP
A
xlamp ® mHD-G leds
Humidity Indicator
Card (inside bag)
Packaging
Dessicant
(inside bag)
Unpackaged Reel
Label with Cree Bin
Code, Qty, Reel ID
Packaged Reel
Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Label with Cree Order Code,
Qty, Reel ID, PO #
Label with Cree Bin
Code, Qty, Reel ID
Label with Custo
Code, Qty, Reel I
Boxed Reel
Label with Cree Order Code,
Qty, Reel ID, PO #
Patent Label
Label with Cree Bin
Code, Qty, Reel ID
Patent Label
®
®
®
Copyright ©
toto
change
without
notice.
Cree
, the
and EasyWhite
aretrademarks
registered
© 2015
2010 Cree,
Cree, Inc.
Inc. All
Allrights
rightsreserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subject
change
without
notice.
Cree,
theCree
Creelogo,
logoXLamp
and XLamp
are registered
trademarks
of Cree, Inc.of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
19