CASE STUDY DESIGN 3

Wax - AW1
For flat-head printers
AW1 is a wax quality ribbon developed for, and best suited to, general purpose label printing,
offering heat resistance up to 60ºC (140ºF). This product provides good, clear printed
images, text and barcodes on to a wide range of label stocks, from synthetics to paper –
uncoated papers particularly, and with a blackness above 2.1 (ODR). The back coating of
the AW1, as with all Toshiba approved ribbons, offers the best in printhead protection.
Toshiba AW1 ribbons – cost-effective labelling starts here.
Available for
B-442
B-452
B-SV4T
B-443
B-852
B-SA4
Characteristics
● Suitable for all kinds of paper substrates
● Excellent blackness
● Very good sensitivity
● Available in colours
Specifications
Ink
Type
Melting point*
Carrier
Type
Thickness
Tensile strength*
Back Coating
Silicone product based
Optical Density*
Optical Density by Reflection (ODR)
Colours
Wax
65ºC
Polyester film
4.5 ± 0.3 µm
> 300 N/mm2 (MD)
Low coefficient of friction*: Kd < 0.2
> 1.9 (Macbeth TR 927)
Black, White, Yellow (Process yellow C),
Magenta (Process magenta C), Cyan (Process cyan C),
Brown (478 C), Red (185 C), Day-glo (805 C),
Light green (Green C), Blue (286 C), Grey (Warm grey 9 C),
Gold (874 C)
*Please note that not using TOSHIBA approved ribbons affects any printer and printhead warranties offered
by TOSHIBA Europe. All company and/or product names are trademarks and/or registered trademarks of
their respective owners. All features and specifications are subject to change without notice.
Wax/resin - AG2
For corner / near-edge printers
The AG2 is a multi-purpose wax resin product and is Toshiba’s most popular ribbon type
for near edge printers. Its highly versatile performance fulfills the needs of most standard
applications. It lays down a clear and sharp printed image on most label stocks, from
uncoated and glossy papers to synthetics. Withstanding heat up to 100ºC (212ºF) with a
blackness of 1.6(ODR) the AG2 will give good levels of mechanical resistance and, as with
all Toshiba ribbon products, its superior back coating will prevent static build-up and
clogging, and offer the very best in printhead protection.
Toshiba AG2 ribbons – high quality smearless printing.
Available for
B-882
B-492
B-572
B-SX4
B-682
B-372
B-672
B-SX5
B-482
B-472
B-872
CB-416
CB-426
Characteristics
● Excellent material compatibility
● Excellent for high speed printing
● Clear sharpness of 90º barcodes
● Very good smudge resistance
and blackness
● Available in colours
Specifications
Ribbon thickness
Microns
< 8.5 µm
Ink
Type
Melting point
Carrier
Type
Thickness
Tensile strength*
Back Coating
Silicone product based
Low coefficient of friction: Kd < 0.2
High temperature of resistance
Optical Density
Optical Density by Reflection (ODR)
Smudge Resistance*
No print damage after 200 runs
Wax/resin
80°C
Polyester film
4.5 ± 0.3 µm
> 300 N/mm2 (MD)
> 1.6 (Macbeth TR 927)
(Crockmeter, smudge pressure of 680 g/cm2 load)
Colours
Black, Blue (Reflex blue C), Red (1788 C), Green (Green C),
Yellow (Process yellow C), Magenta (Process magenta C),
Cyan (Process cyan C), Orange (151 C)
*Please note that not using TOSHIBA approved ribbons affects any printer and printhead warranties offered
by TOSHIBA Europe. All company and/or product names are trademarks and/or registered trademarks of
their respective owners. All features and specifications are subject to change without notice.
Wax/resin - AG2
For flat-head printers
The AG2 is a versatile wax resin ribbon offering excellent print performance on to an
extremely wide range of receiving materials and with a blackness above 1.9 (ODR).
Its versatility fills the requirements of many different applications and is ideal for the flexible
packaging industry. This flat head AG2 type offers heat resistance up to 100ºC (212ºF) and,
as with all Toshiba ribbon products, its superior back coating offers low-friction technology
for outstanding printhead protection and lower energy requirements.
Toshiba AG2 ribbons – high quality smearless printing.
Available for
B-442
B-452
B-SV4T
B-443
B-852
B-SA4
Characteristics
● Excellent material compatibility
● Good smudge resistance
● High speed printing
● Available in colours
Specifications
Ribbon thickness
Microns
Ink
Type
Melting point
Carrier
Type
Thickness
Tensile strength
Backcoating
Silicone product based
Low coefficient of friction
Optical Density
Optical Density by Reflection (ODR)
Smudge resistance*
Printing visible after 200 runs
< 10µm
Wax/resin
75°C
Polyester film
4.5µm +/- 0.3
> 300 N/mm2 (MD)
Kd < 0.2
> 1.9 (Macbeth TR 927)
(Crockmeter, smudge pressure of 680 g/cm2 load)
Colours
Black, White, Blue (Reflex blue C), Red (1788 C),
Green (Green C),
Orange (151 C), Brown (463 C),
Dark Blue (286 C), Dark Red (485 C), Dark Green (554 C)
*Please note that not using TOSHIBA approved ribbons affects any printer and printhead warranties offered
by TOSHIBA Europe. All company and/or product names are trademarks and/or registered trademarks of
their respective owners. All features and specifications are subject to change without notice.
Wax/resin - AG3
For flat-head printers
A ‘NEW’ generation product: AG3 is a wax resin quality developed to complement the new
generation of flat-head printers. An extremely versatile product, it offers excellent print
performance on an even wider range of receiving materials than its predecessor, the AG2.
It has high sensitivity and therefore runs at lower temperatures and higher speeds, with
improved blackness of 2.1 (ODS) and heat resistance up to 100ºC (212ºF).
The enhancements of this premium wax resin product makes it the perfect choice for the
flexible packaging industry and, as with all Toshiba ribbon products, its superior back coating
offers the very best in printhead protection.
Toshiba AG3 ribbons – high quality smearless printing.
Characteristics
● Excellent multi-receptor compatibility
● High speed capability
● High sensitivity, run at low energy
● Low noise
● Improved blackness - crisp, black
● Available in colours
printed images
Specifications
Ribbon Thickness
Ink
Carrier
Back Coating
Optical Density
Smudge Resistance*
Microns
< 10µm
Type
Wax/resin
Melting point
65°C
Type
Polyester film
Thickness
4.5 ± 0.5 µm
Tensile strength*
> 300 N/mm2 (MD)
Silicone product based
Low coefficient of friction: Kd < 0.2
Optical Density by Reflection (ODR)
> 2.1 (Macbeth D 19C)
No print damage after 200 runs
2
(Crockmeter, smudge pressure of 680 g/cm load)
Colours
Black, White, Blue (Reflex blue C), Red (1788 C),
Green (Green C),
Orange (151 C), Brown (463 C),
Dark Blue (286 C), Dark Red (485 C), Dark Green (554 C)
N.B. Colours will remain under AG2 quality
Certifications and Approvals
B.G.A
Heavy metals
RoHs/WEEE
Ames test
TSCA/CP 65
EC directives
Direct food contact EU
EC 98/638
EC directives 2002/65 and 2002/96 compliance to the limitation of
dangerous substances in electrical equipment
Ribbon is non-mutagenic, does not cause DNA modifications
Ribbon does not contain any of the substances on this list
1999/45/EC - ribbon does not contain any substances classified
as dangerous to health
* Please note that not using Toshiba approved ribbons affects any printer and printhead warranties offered
by TOSHIBA Europe. All company and/or product names are trademarks and/or registered trademarks of
their respective owners. All features and specifications are subject to change without notice.
Wax/resin - AG4
For corner / near-edge printers
The AG4 is a super premium wax resin ribbon developed to perform in applications that
need extra mechanical resistance but at a much lower price than a full resin quality.
This ribbon is very versatile, performing well on most uncoated papers as well as glossy and
synthetic materials. It will withstand heat up to 110ºC (230ºF) and has a blackness of 1.6
(ODR). The AG4 is also available in metallic white. As with all Toshiba ribbon products its
superior back coating offers the very best in printhead protection.
Toshiba AG4 ribbons – the efficient alternative for the very latest in printing technology.
Available for
B-882
B-492
B-572
B-SX4
B-682
B-372
B-672
B-SX5
B-482
B-472
B-872
CB-416
CB-426
Characteristics
● Excellent smudge and scratch resistance
● Very good quality at high speed printing
● Multi receptor compatibility
Specifications
Ribbon thickness
Microns
< 8.5 µm
Ink
Type
Melting point
Carrier
Type
Thickness
Tensile strength*
Back Coating
Silicone product based
Optical Density
Optical Density by Reflection (ODR)
High temperature of resistance
Smudge Resistance*
No print damage after 200 runs.
Wax/resin
85°C
Polyester film
4.5 ± 0.3 µm
> 300 N/mm2 (MD)
Low coefficient of friction: Kd < 0.2
> 1.8 (Macbeth TR 927)
(Crockmeter, smudge pressure of 680 g/cm2 load)
Colours
Black,
Metalic white
*Please note that not using TOSHIBA approved ribbons affects any printer and printhead warranties offered
by TOSHIBA Europe. All company and/or product names are trademarks and/or registered trademarks of
their respective owners. All features and specifications are subject to change without notice.
Wax/resin - AG5
For corner / near-edge printers
The AG5 is a new generation wax resin ribbon, adapted to cope with the very high speeds
required in today’s flexible packaging market. Printing on to a wide range of receiving
materials, including Tyvek®. It offers a blackness of 1.8 (ODR) and will withstand temperatures
up to 100ºC (212ºF). The back coating offers exceptional printhead protection and will
prevent static build-up and clogging.
Toshiba AG5 ribbons – premium images for a clearer future.
Available for
B-882
B-492
B-572
B-SX4
B-682
B-372
B-672
B-SX5
B-482
B-472
B-872
CB-416
CB-426
Characteristics
● Adapted for corner/near edge technology
● Outstanding smudge resistance
● Excellent material compatibility
● Blackness
● Very high speed capability
Specifications
Ribbon thickness
Microns
< 8.5 µm
Ink
Type
Melting point
Carrier
Type
Thickness
Tensile strength*
Back Coating
Silicone product based
Optical Density*
Optical Density by Reflection (ODR)
Smudge Resistance*
No damage to the printout after 200 runs
Wax/resin
85°C
Polyester film
4.5 ± 0.3 µm
> 300 N/mm2 (MD)
Low coefficient of friction: Kd < 0.2
> 1.8 (MacBeth D19C)
(Crockmeter, smudge pressure of 680 g/cm2 load)
Colours
Black
*Please note that not using TOSHIBA approved ribbons affects any printer and printhead warranties offered
by TOSHIBA Europe. All company and/or product names are trademarks and/or registered trademarks of
their respective owners. All features and specifications are subject to change without notice.
Resin - AS1
For near-edge printers
The AS1 is a new generation resin ribbon developed for applications requiring excellent
mechanical and solvent resistance. It is the recommended product for use in harsh
environment label printing for the chemical and pharmaceutical industries. The AS1 is
compatible with most synthetic materials, and some matt and high gloss coated papers.
It will withstand temperatures of up to 180ºC (356ºF) and has a blackness of 1.8 (ODR). It is
UL recognized and has BGA approval (EU direct food contact). It also offers the very best in
printhead protection, as with all Toshiba ribbon products.
Toshiba AS1 is the preferred choice for all images destined for harsh situations.
Available for
B-882
B-492
B-572
B-SX4
B-682
B-372
B-672
B-SX5
B-482
B-472
B-872
CB-416
CB-426
Characteristics
● Excellent print quality
● Available in colours
● Multi receptor compatibility and sensitivity
● Outstanding scratch and solvent
resistance
● Good resistance to high temperatures
Specifications
Ribbon thickness
Microns
< 9 µm
Ink
Type
Melting point
Carrier
Type
Thickness
Tensile strength*
Back Coating
Silicone product based
Optical Density
Optical Density by Reflection (ODR)
Smudge Resistance*
Printing is perfectly visible after 200 runs
Resin
80°C
Polyester film
4.5 ± 0.3 µm
> 300 N/mm2 (MD)
Low coefficient of friction: Kd < 0.2
> 1.8 (Macbeth TR 927)
(Crockmeter, smudge pressure of 680 g/cm2 load)
Colours
Black, White,
Green (Green C)
Dark blue (286 C),
Dark red (192 C),
*Please note that not using TOSHIBA approved ribbons affects any printer and printhead warranties offered
by TOSHIBA Europe. All company and/or product names are trademarks and/or registered trademarks of
their respective owners. All features and specifications are subject to change without notice.
Resin - AS1
For flat-head printers
The AS1 is a pure resin ribbon developed for applications requiring excellent mechanical and
solvent resistance. It is suited to most synthetic materials such as PVC, PET, PP and various
matt and gloss coated papers, and is the preferred choice for printed images that are
exposed to harsh environments. The AS1 is UL recognised and BS5609 approved when used
in association with the correct substrates. It has a heat resistance of up to 180ºC (356ºF) and,
as with all Toshiba ribbon products, it offers the very best in printhead protection.
Toshiba AS1 is the preferred choice for all images destined for harsh situations.
Available for
B-442
B-452
B-SV4T
B-443
B-852
B-SA4
Characteristics
● Excellent print quality
● Available in colours
● Multi receptor compatibility and sensitivity
● Outstanding scratch and solvent
resistance
● Good resistance to high temperatures
Specifications
Ribbon thickness
Microns
< 9 µm
Ink
Type
Melting point
Carrier
Type
Thickness
Tensile strength*
Back Coating
Silicone product based
Optical Density*
Optical Density by Reflection (ODR)
Smudge Resistance*
Printing is perfectly visible after 200 runs
Resin
80°C
Polyester film
4.5 ± 0.3 µm
> 300 N/mm2 (MD)
Low coefficient of friction: Kd < 0.2
> 1.5 (Macbeth TR 927)
(Crockmeter, smudge pressure of 680 g/cm2 load)
Colours
Black, White,
Green (Green C)
Dark blue (286 C),
Dark red (192 C),
*Please note that not using TOSHIBA approved ribbons affects any printer and printhead warranties offered
by TOSHIBA Europe. All company and/or product names are trademarks and/or registered trademarks of
their respective owners. All features and specifications are subject to change without notice.
Super resin - AS2
For flat-head and near-edge printers
The AS2 is a superior (‘super’) resin ribbon ideal for applications needing exceptional heat,
mechanical and chemical resistance. Printing on to a wide range of synthetic material, high
gloss and matt coated papers, the printed image will withstand temperatures up to 250ºC
(482ºF). As with all Toshiba ribbons, the superior back coating prevents static build-up and
clogging, offering the very best in printhead protection.
Toshiba AS2 ribbons – the definitive choice for extreme conditions.
Available for
B-442
B-SV4T
B-482
B-572
B-SX5
B-443
B-SA4
B-492
B-672
CB-416
B-452
B-882
B-372
B-872
CB-426
B-852
B-682
B-472
B-SX4
Characteristics
● Superior resistance to smudge
● Excellent resistance to solvents and to
and scratching
high temperature
Specifications
Ink
Type
Melting point*
Resin
85ºC
Carrier
Type
Thickness
Tensile strength*
Back Coating
Silicone product based
Optical Density*
Optical Density by Reflection (ODR)
Smudge Resistance*
No damage to the printout after 200 runs
Polyester film
4.5 ± 0.3 µm
> 300 N/mm2 (MD)
Low coefficient of friction*: Kd < 0.2
1.6 (Macbeth TR 927)
(Crockmeter, rub pressure of 680g/cm2 load)
Solvent resistance*
(rub tester, rub pressure of 262 g/cm2, material for testing: glossy PET)
Unleaded petrol**
Mineral spirit (E)
Ethanol (99%)
Brake fluid**
Engine oil
Colours
Black,
No damage to the printout after 15
No damage to the printout after 200
No damage to the printout after 100
No damage to the printout after 15
No damage to the printout after 200
runs
runs
runs
runs
runs
Orange (151 C)
**Very aggressive solvents
*Please note that not using TOSHIBA approved ribbons affects any printer and printhead warranties offered
by TOSHIBA Europe. All company and/or product names are trademarks and/or registered trademarks of
their respective owners. All features and specifications are subject to change without notice.
Resin - AS3
For flat-head and near-edge printers
The AS3 is a pure resin ribbon developed for printing wash care labels in the textile industry.
Best suited to polysatins and nylons, the printed image offers excellent resistance to dry
cleaning and both home and industrial washing, bleaching and ironing. The AS3’s
outstanding back coating prevents static build-up and clogging, offering the very best in
printhead protection.
Toshiba AS3 ribbons – the perfect outfit for the occasion.
Available for
B-442
B-SV4T
B-482
B-572
B-SX5
B-443
B-SA4
B-492
B-672
CB-416
B-452
B-882
B-372
B-872
CB-426
B-852
B-682
B-472
B-SX4
Characteristics
● Excellent printing quality on textile material
● Excellent resistance to washing and
dry cleaning
● Very good resistance to ironing
Specifications
Ink
Type
Melting point*
Carrier
Type
Thickness
Tensile strength*
Back Coating
Silicone product based
Optical Density*
Optical Density by Reflection (ODR)
Resistance
Home Laundry
Print is still legible after several dozen
washes at 40ºC, 60ºC, 90ºC
Industrial Laundry
Print is still legible after several washes at
60ºC with bleach
Dry Cleaning
Excellent resistance to the perchloroehtylene
Ironing
Good heat resistance up to 200ºC
Colours
Resin
90ºC
Polyester film
4.5 ± 0.3 µm
> 300 N/mm2 (MD)
Low coefficient of friction*: Kd < 0.2
1.2 (Macbeth TR 927)
Black
*Please note that not using TOSHIBA approved ribbons affects any printer and printhead warranties offered
by TOSHIBA Europe. All company and/or product names are trademarks and/or registered trademarks of
their respective owners. All features and specifications are subject to change without notice.
Wax/resin - RG2
For corner / near-edge printers
RG2 is a wax resin ribbon introduced to meet the technical requirements of Toshiba’s
industrial printers. It has been developed, designed, tested and prepared to extremely high
standards. It offers clear, sharp-edged printing on to a wide range of receiving materials
and tags, and maximises barcode scanning rates. It also utilises a patented back coating
technology which minimises static electricity and reduces wear on the printhead.
Toshiba RG2 ribbons – ideal for fast smearless images from industrial machines.
Available for
B-882
B-492
B-572
B-SX4
B-682
B-372
B-672
B-SX5
B-482
B-472
B-872
Characteristics
● Specially designed for edge type
thermal printhead
● Low electronic incidence
● High sensitivity
(printing speed: up to 10 inches/second)
Specifications
Ink
Type
Carrier
Type
Thinkness
Transparency
Printed properties
Image Density (ODU)
Image resolution
Durability
Colours
Wax/resin
Polyester film
4.5 ± 0.4 µm
Min. 0.65*
Min 1.5*
Min. horizontal bar ANSI B
Friction resistance
Min. vertical bar ANSI A
Scratch resistance
Min. 200 (cast coated paper white PET)
Black
*Please note that not using TOSHIBA approved ribbons affects any printer and printhead warranties offered
by TOSHIBA Europe. All company and/or product names are trademarks and/or registered trademarks of
their respective owners. All features and specifications are subject to change without notice.
Wax/resin - RS1
For corner / near-edge printers
The RS1 is a heavy duty pure resin ribbon that has been tested and prepared to extremely
high standards and exceeds the high heat, scratch and chemical resistance levels required in
the automotive, pharmaceutical and government sectors. It is designed for printing on to a
wide range of films and label stocks. It also utilises a patented back coating technology that
minimises static electricity and reduces wear on the printhead.
Toshiba RS1 ribbons – permanence under pressure.
Available for
B-882
B-492
B-572
B-SX4
B-682
B-372
B-672
B-SX5
B-482
B-472
B-872
Specifications
Ink
Type
Carrier
Type
Thinkness
Transparency
Printed properties
Image Density (ODU)
Image resolution
Durability
Min 1.25*
Min. horizontal bar ANSI 1.5 C
Min. vertical bar ANSI A
Scratch resistance
Min. 200 (white PET & clear PET)
Chemical resistance
NOTE
Polyester film
4.5 ± 0.4 µm
Min. 0.65*
Friction resistance
Light/water resistance
Colours
Wax/resin
Min. ANSI 3.5 A (fence bar)
Ethanol
Karosene
Engine oil
Min. 20
Min. 150
Min. 600
Black
● Only compatible with corner / near-edge printer head technology
● Testing prior to use is strongly recommended
*Please note that not using TOSHIBA approved ribbons affects any printer and printhead warranties offered
by TOSHIBA Europe. All company and/or product names are trademarks and/or registered trademarks of
their respective owners. All features and specifications are subject to change without notice.
Resin enhanced wax - SW1
For flat-head printers
SW1 is a resin-enhanced wax ribbon that sets new standards in wax technology. It has
excellent print density with superior mechanical and smudge resistance, and its new back
coating formula offers unparalleled print head protection – more than 10 times the industry
standard. By combining the benefits of high performance and speed the SW1 exceeds
standards even further by fulfilling the requirements of applications that would ordinarily
need a more costly wax resin product.
Toshiba SW1 ribbons – superior smudge resistance and the very best in printhead
protection - that’s a promise.
Available for
B-442
B-452
B-SV4T
B-443
B-852
B-SA4
Characteristics
● Excellent smudge resistance
● High speed printing at low temperatures
● Superior print density
● Unparalleled print head protection
Specifications
Ink
Type
Carrier
Total thinkness
7.9 ± 0.5 µm
Base film thinkness
4.8 ± 0.4 µm
Ink thinkness
2.8 ± 0.3 µm
Printed properties
Resin enhanced wax
Transmition Density
Min. 1.45*
Print Density
Durability
Colours
Min. 1.70
Label stock
Coated paper
Print speed
6 IPS (print desity 1.79)
Smudge resistance
(50 cycles @ 500 grms with cotton cloth)
ANSI A1
Scratch resistance
(20 cycles @ 200 grms with stainless steel pointed tip)
ANSI A1
Black
ANSI = American National Standard Institute
A = Excellent, B = Above average, C = Average, D = Below average , E & F = Poor
*Please note that not using TOSHIBA approved ribbons affects any printer and printhead warranties offered
by TOSHIBA Europe. All company and/or product names are trademarks and/or registered trademarks of
their respective owners. All features and specifications are subject to change without notice.
Wax/resin - SG2
For flat-head printers
The SG2 is a wax resin ribbon with a special ink formulation that gives crisp printed images.
It has an additional top coating and unique release layer which provide smudge and scratch
resistance beyond current industry standards.
The SG2 allows printing on to a wide range of label materials but is specifically designed
to print on high gloss paper and polyethylene. The chemical nature of the ink allows high
quality image printing at speeds up to 250mm/s (depending on the application and the
characteristics of the printer).
Toshiba SG2 ribbons – smearless results time after time.
Available for
B-442
B-452
B-SV4T
B-443
B-852
B-SA4
Characteristics
● Excellent on rough to high gloss papers
● Crisp rotated barcodes
● High speed printing
● Excellent smudge and scratch resistance
Specifications
Ink
Type
Carrier
Total thinkness
8.6 ± 0.6 µm
Base film thinkness
4.8 ± 0.4 µm
Ink thinkness
3.7 ± 0.5 µm
Printed properties
Wax/resin
Transmition Density
Min. 1.4*
Print Density
Durability
Colours
Min. 1.9
Label stock
Paper
Print speed
6 IPS (print desity 1.75)
Smudge resistance
(20 cycles @ 800 grms with cotton cloth)
ANSI A1
Scratch resistance
(20 cycles @ 380 grms with stainless steel pointed tip)
ANSI A1
Black
ANSI = American National Standard Institute
A = Excellent, B = Above average, C = Average, D = Below average , E & F = Poor
*Please note that not using TOSHIBA approved ribbons affects any printer and printhead warranties offered
by TOSHIBA Europe. All company and/or product names are trademarks and/or registered trademarks of
their respective owners. All features and specifications are subject to change without notice.
Wax/resin - SG2
For corner / near-edge printers
The SG2 is a wax resin ribbon with a special ink formulation that applies crisp printed
images and barcodes on to a very wide range of receiving materials, making it the ideal
choice for multi-label applications. Whether you are printing on to coated or uncoated
papers, from tags to Tyvek® and Valeron®, you are assured of a quality printed image time
after time, critical when producing large quantities of barcodes that need to be successfully
scanned, avoiding the expensive rejection and return of illegibly labelled products.
Toshiba SG2 ribbons – smearless results time after time.
Available for
B-882
B-492
B-572
B-SX4
B-682
B-372
B-672
B-SX5
B-482
B-472
B-872
CB-416
CB-426
Characteristics
● Excellent material compatibility
● Outstanding smudge resistance
and blackness at low temperatures
● High speed printing
● Unparalleled printhead protection
● Meets FDA requirments for indirect
for contact
Specifications
Ink
Type
Carrier
Total thinkness
8.2 ± 0.5 µm
Base film thinkness
4.8 ± 0.4 µm
Ink thinkness
1.4 ± 0.3 µm
Printed properties
Wax/resin
Transmition Density
Min. 1.2*
Print Density
Durability
Colours
Min. 1.6
Label stock
Coated paper
Print speed
3 IPS (print desity 1.86)
Smudge resistance
(50 cycles @ 500 grms with cotton cloth)
ANSI A
Scratch resistance
(35 cycles @ 200 grms with stainless steel pointed tip)
ANSI A
Black
ANSI = American National Standard Institute
A = Excellent, B = Above average, C = Average, D = Below average , E & F = Poor
*Please note that not using TOSHIBA approved ribbons affects any printer and printhead warranties offered
by TOSHIBA Europe. All company and/or product names are trademarks and/or registered trademarks of
their respective owners. All features and specifications are subject to change without notice.
Resin - SS1
For flat-head printers
The SS1 is a general purpose pure resin ribbon developed in response to the most demanding
requirements of the pharmaceutical, chemical and automotive industries. The ink formula offers
very good levels of mechanical and solvent resistance and performs well on a wide range of
synthetic materials, producing sharp and clear printed images and barcodes.
Toshiba SS1 ribbons – An ideal choice for outdoor applications as it will withstand the
harshest extremes of weather conditions.
Available for
B-442
B-452
B-SV4T
B-443
B-852
B-SA4
Characteristics
● Prints at low temperatures
● UL recognized
● High durability with super solvent
● Heat resistance of up to 170ºC
resistance
Specifications
Ink
Type
Carrier
Total thinkness
8.7 ± 0.8 µm
Base film thinkness
4.5 ± 0.4 µm
Ink thinkness
1.4 ± 0.4 µm
Printed properties
Resin
Transmition Density
Min. 1.15*
Print Density
Durability
Colours
Min. 1.6
Label stock
Topcoated white polyester
Print speed
8 IPS (print desity 2.40)
Smudge resistance
(100 cycles @ 800 grms with cotton cloth)
ANSI A1
Scratch resistance
(100 cycles @ 380 grms with 3mm steel ball)
ANSI A1
Black
ANSI = American National Standard Institute
A = Excellent, B = Above average, C = Average, D = Below average , E & F = Poor
*Please note that not using TOSHIBA approved ribbons affects any printer and printhead warranties offered
by TOSHIBA Europe. All company and/or product names are trademarks and/or registered trademarks of
their respective owners. All features and specifications are subject to change without notice.
Always choose Toshiba ribbons for Toshiba printers
The wide range of Toshiba ribbons available today ensures that our valued customers have
different product options for virtually every thermal transfer application. Using Toshiba
ribbons ensures optimum print quality causing minimum wear on working parts - in particular
to the printhead.
Before a ribbon is certified by Toshiba it must first undergo stringent tests to ensure its
continuity and reliability in the field. It is assessed on a variety of receiving materials, and at
every speed and temperature combination. Only once this procedure is complete and
deemed successful will the ribbon receive its certificate of approval.
This commitment to quality and reliability is what you would expect from Toshiba as the
biggest thermal transfer ribbon distributor in Europe.
Other approved ribbon types available
Standard applications
Specialist resins for
● Wax
● Super wax resin
● Wax resin
● Full resin
● Wash-care & textile
● Extreme automotive and
labelling
aviation environments
● Harsh chemical and
industrial uses
Colour ribbons are also available in all qualities including HazChem orange.
The complete Toshiba ribbon range
Quality codes
AW1 SW1 AG2 AG4 AG5 FG2 PG2 RG2 SG2 AS1 AS2 AS3 FS1 RS1 SS1
RIBBON TYPE
General purpose wax
●
●
General purpose
wax resin (smearless)
●
●
●
●
●
●
Scratch/solvent
resistant resin
●
Economy resin/
enhanced wax resin
●
●
●
●
●
Specialist super resin
●
Washcare textile resin
PRINTER TYPE
Old B series B-30, 402,
602, 65 & 63
●
B-443, B-452, B-852, B-SV4T,
& B-SA4T flat head printer
●
●
●
●
BX and SX
near edge printer
●
CB-416-T3 and
CB-426-T3 colour printer
●
●
CB-416-T1 colour printer
●
●
●
●
AVAILABLE IN COLOUR
(AS2 in orange only)
PREMIUM KIT REQUIRED!
(colour printer only)
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
TOSHIBA - leading the way through quality and innovation.
TOSHIBA TEC Europe Retail Information Systems S.A
Campus 300, Spring Way, Maylands Ave, Hemel Hempstead, Herts, HP2 7GG
Telephone: +44 (0)870 890 7200
+44 (0)870 890 7350
Fax:
Email:
Web:
[email protected]
www.toshibatec-eu.com