Product note
Kabeldon pre-assembled dry cable termination, 145 kV
TD 145
Outdoor dry cable termination with
integrated screen separation. For
installations in which the termination
is to be used as a fixed connection
point and where very high continuous
creepage currents can occur.
Designed to meet the requirements of
internationally accepted standards.
1
2
3
4
5
6
7
1. Top bolt
Made from aluminium or tin-plated copper.
2. Conductor connection
Mechanical bolt connector is suitable for cables with
aluminium or copper conductor.
3. Top cover cap
Made from aluminium alloy. The round profile prevents
corona effect. The top cover protects the connection point
against air pollutants.
6. Cable clamp
Made from fiberglass reinforced polyester. The cable clamp
secures the cable in a fixed position.
7. Earth clamp
The earth clamp is made of nickel-plated brass. The earth
clamp has a rated cross section of 1050 mm².
Main technical data
Electrical data, IEC standard 60840
Voltage kV
4. Insulator
Low weight composite insulator with integrated field control.
Highest voltage for equipment, Um
Rated voltage, U
Value of U0 for determination of test voltage
145
132–138
76
5. Base part
Made from aluminium alloy. The base part is integrated in
the insulator.
Heating cycle voltage test, 2U0
Partial discharges test <5pC, 1.5U0
Switching impulse voltage test
Lighting impulse voltage test, BIL
AC voltage test, 2.5U0
152
114
–
+ 650
190
Ø 40/50/54/60 mm
Installation of TD 145 in Norway.
OKT
Optical fiber kit for cables with
integrated optical fibers in the
earth screen.
O-ring
Top cover
O-ring
A sectioned
picture shows
the pre-assembled
insulator.
SCK 2
Earthing kit for cable with copper
wire screen and metal-PE laminate.
Common specifications
Type TD 145
Net weight, complete termination, kg
Creepage distance total, mm
Dimension A, mm
145
100
4650
1630
Rated frequency, Hz
50/60
Altitude site, m
Max. inclination, degrees
Max. horizontal or vertical force on top bolt, N
Conductor
connection
Rubber seal
~350 mm
Ambient temperature °C
Top bolt
Top fitting details.
JSA 1 Pb
Earthing kit for metal-sheathed
cable with or without copper
wire screen.
Packaging
Net weight Gross weight Dimensions
kg
kg
mm
Box 1, termination parts 26
30
800 x 410 x 290
Box 2, pre-assembled
76
84
1440 x 440 x 570
termination
Dimensions and weights may vary as products occasionally have different packaging.
±50
<1000
45
2000
Routine test
Composite insulator according to IEC 61462
Dimensional and electric test according to IEC 60840 is performed on
each stress cone
Leakage test of top cover and top cap
Visual inspection is performed on all parts of the termination
Storage
When stored in original, unopened packaging at temperatures
in the range of -30°C to 30°C:
The pre-assembled termination has a shelf life of 5 years from
date of manufacture.
Tapes and grease have a shelf life of five years.
Metal hardwares have no shelf life limit.
Cable range
Prepared insulation Ø (mm)
Conductor Cu/Al (mm²)
Oversheath Ø (mm)
For additional information, please visit:
www.abb.com/cableaccessories
© Copyright 2014 ABB. All rights reserved.
Specifications subject to change without notice.
53–102
400–2500
150
Optional equipment
Kit for optical fiber in screen
Earthing kit
Screen connection
Designation
OKT
JSA
SCK
Document ID: 7ABA102691
Type testing in an independent
laboratory.
Top cover
cap
Creepage distance 4650 mm
A = 1630 mm
~130 mm