Product note Kabeldon cable termination for GIS and TRF, 420 kV

Product note
Kabeldon cable termination for GIS and TRF, 420 kV
APEGA 420
Cable termination suitable as a fixed
connection point in a gas-insulated
switchgear, a transformer without
a separate cable box or where the
cable box is filled with transformer oil.
Designed to meet the requirements of
internationally accepted standards.
1. Top fitting
Made of brass.
2. Conductor connection
Silver-plated brass connector.
3. Insulator
Made of epoxy with an integrated screen interruption.
4. Filling compound
Polybuthene oil, volume: 30 liters (expansion vessel included).
5. Stress relief cone
Premolded stress relief cone designed for geometric field
control.
6. Pressure ring
Made of aluminium alloy (bolts are not included).
7. Flange
Made of aluminium alloy.
8. Box body
Made of aluminium alloy.
2
1
3
4
5
6
7
8
9
10
11
9. Earth clamp
The earthing clamp is made of tin-plated brass and clamped
with stainless steel bolts. The earth clamp has a rated cross
section of 1050 mm².
10. Cable clamp
Made of aluminium alloy. The clamp secures the cable in a
fixed position.
11. Corona shield
Corona shield for transformer (TRF) applications, made of
aluminium with surface insulation coating.
Main technical data
Electrical data, IEC standard 60840
Highest voltage for equipment, Um
Rated voltage, U
Value of U0 for determination of test voltage
Heating cycle voltage test, 2U0
Partial discharge test <5pC, 1.5U0
Switching impulse voltage test
Lighting impulse voltage test, BIL
AC voltage test, 2 U0
Voltage kV
420
380-400
220
440
330
+ 1050
+ 1425
440
Dimensions in mm
160
Ø 535
Ø 18 (20x)
1400
Ø 570
Pressure ring.
Laboratory for product testing.
APEGA installation.
Ø 690
~775
Ø 640
Ø 18 (20x)
For GIS.
For TRF.
Ø 448
AF 420
Adapter flange.
CBT 420
Contact bolt for installation
of APEGA 420 in transformers.
CST 420
Corona shield for TRF installation.
Common specifications
Classifications
Net weight, complete termination, kg
GIS/TRF
~ 340
Rated frequency, Hz
Max inclination, degrees
50/60
No limitations
Dimensions according to IEC 62271-209
GIS
Dimensions according to EN 50299
TRF
RE-APEGA
Re-assembly kit. Stress cone
is included. Top bolt must be
ordered separately.
OKT
Kit for optical fibers in screen.
Cable range
Prepared insulation Ø (mm)
Conductor Cu/Al (mm²)
82–120
240–3000
Oversheath Ø (mm)
160
Packaging
Net weight Gross weight Dimensions
kg
kg
mm
Box 1, termination parts 60
80
120 / 80 / 80
Routine test
Epoxy insulator according to EN 50089
Filling compound:
Box 2, termination parts 110
130
120 x 80 x 73
Box 3, insulator
191
175 x 66 x 75
170
Dimensions and weights may vary as products occasionally have different packaging.
- Dielectric strength according to IEC 60156
- Water content test according to Karl Fischer method
Leakage test on flange
Visual inspection is performed on all parts of the termination
Stress relief cone routine tested according to IEC 62067
- Partial discharge measurement, <5pC, at 1.5 U0
- AC voltage withstand test, 2U0 for 1 h
420 kV
330 kV
440 kV
Storage
When stored in original, unopened packaging at temperatures
in the range of -30°C to 30°C:
− The stress relief cone has a shelf life of ten years from date
of manufacture.
− Tapes and grease have a shelf life of five years.
− Metal hardwares have no shelf life limit.
The insulating oil shall be stored in original, unopened packaging at temperatures in the range of 5°C to 45°C. The shelf
life is ten years from date of manufacture.
Optional equipment
Connection bolt for TRF installation
Corona shield for TRF installation
Re-assembly kit
Opto kit
Screen connection kit
Earthing kit
For additional information, please contact:
www.abb.com/cableaccessories
© Copyright 2014 ABB. All rights reserved.
Specifications subject to change without notice.
Designation
CBT 420
CST 420
RE-APEGA
OKT
SCK
JSA
Document ID: 7ABA102626_REV A
Ø 464