Data Sheet (English)

Inductive angle sensor
Ri360P1-QR14-ESG25X2-0,3-RS8
■
Rectangular, plastic
■
Many mounting possibilities
■
■
■
Type code
Ident no.
Ri360P1-QR14-ESG25X2-0,3-RS8
1590808
Resolution
Measuring range
Repeatability
Linearity deviation
Temperature drift
Ambient temperature
16 bit
0…360°
ð 0.025 % of full scale
ð 0.3 % f.s.
ð ± 0.0001 % / K
-25…+70 °C
Operating voltage
Residual ripple
Rated insulation voltage
Short-circuit protection
Wire breakage / Reverse polarity protection
Output function
Process data area
Diagnostic bits
15…30VDC
ð 10 % Uss
ð 0.5 kV
yes
yes/ yes (voltage supply)
8-pin, SSi, 25 Bit, Gray coded
Bit 0 … Bit 15
Bit 22: Positioning element is in the measuring
range, lower signal quality (e.g. distance too large)
Bit 23: Positioning element is outside the measuring
range
500 Hz
< 100 mA
Sample rate
Current consumption
Construction
Dimensions
Housing material
Connection
Cable quality
Cable cross section
Vibration resistance
Vibration resistance (EN 60068-2-6)
Shock resistance (EN 60068-2-27)
Continuous shock resistance (EN 60068-2-29)
Protection class
MTTF
Edition • 2015-01-22T08:55:46+01:00
Power-on indication
Measuring range display
Included in scope of supply
1/4
rectangular, QR14
53.5 x 49 x 14 mm
plastic, PBT
Cable with male end, M12 x 1
5.2 mm, LifYY-0, PVC, 0.3m
Positioning element P1-Ri-QR14 included in delivery
LED indicates measuring range
Immune to electromagnetic interferences
■
16 bit resolution
■
15…30 VDC
■
Cable with male end M12 x 1, 8-pin
■
SSI output
■
25 bit, Gray-coded
■
62.5 kHz … 1 MHz
Wiring diagram
Functional principle
The measuring principle of inductive angle
sensors is based on oscillation circuit coupling between the positioning element and the
sensor, whereby an output signal is provided proportional to the angle of the positioning
element. The rugged sensors are wear and
maintenance-free, thanks to the contactless
operating principle. They convince through
their excellent repeatability, resolution and linearity within a broad temperature range. The
innovative technology ensures a high immunity to electromagnetic DC and AC fields.
8 x 0.25 mm
55 Hz (1 mm)
20 g; 10…3000 Hz; 50 cycles; 3 axes
100 g; 11 ms ½ sinus; each 3x; 3 axes
40 g; 6 ms ½ sinus; each 4000 x; 3 axes
IP67
138 years acc. to SN 29500 (Ed. 99) 40 °C
2
LED green
multifunction LED, green
positioning element P1-Ri-QR14; for technical details see data sheet
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com
Inductive angle sensor
Ri360P1-QR14-ESG25X2-0,3-RS8
Adapter pins provide more flexibility
Extensive range of mounting accessories for easy
adaptation to many different shaft diameters.
LED function
Operating voltage
green steady: Power on
Measuring range
green steady: Positioning element is in the measuring
range
green flashing: Positioning element has reached the
end of the measuring range. This is indicated by a
weaker signal.
off: Positioning element is outside the coverage.
Functional safety through inductive measuring
principle
Based on the functional principle of RLC coupling, the
sensor operates absolutely wear-free and is immune to
magnetized metal splinters and other interferences.
Owing to the differential analysis, the output signal remains almost unchanged, even if the position of the positioning element deviates from the ideal axis of rotation. The distance between the sensor and the positioning element can be up to 5 mm, whereby the nominal
Edition • 2015-01-22T08:55:46+01:00
distance is 1 mm.
2/4
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com
Inductive angle sensor
Ri360P1-QR14-ESG25X2-0,3-RS8
Accessories
Type code
Ident no.
Description
P1-Ri-QR14
1590812
Positioning element for inductive angle sensors
P2-Ri-QR14
1590819
Positioning element for inductive angle sensors
P3-Ri-QR14
1590865
Positioning element for inductive angle sensor, flat design
HSA-M6-QR14
6901051
Adapter for Ri-QR14 specific positioning elements, hollow on
Design
solid shaft, Ø 6 mm
HSA-M8-QR14
6901052
Adapter for Ri-QR14 specific positioning elements, hollow on
Edition • 2015-01-22T08:55:46+01:00
solid shaft, Ø 8 mm
3/4
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com
Inductive angle sensor
Ri360P1-QR14-ESG25X2-0,3-RS8
Accessories
Ident no.
Description
DS-Ri-QR14
1590814
Spacer sleeves for rear mounting of Ri-QR14, 2 pcs. per bag
Design
Edition • 2015-01-22T08:55:46+01:00
Type code
4/4
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com