Flex System FC5052 2-port and FC5054 4-port
Flex System FC5052 2-port and FC5054 4-port 16Gb FC Adapters Lenovo Press Product Guide The Flex System™ FC5052 2-port and FC5054 4-port 16Gb FC Adapters enable the highest FC speed access for Flex System compute nodes to an external storage area network (SAN). These adapters are based on the proven Emulex Fibre Channel stack, and work with 16 Gb Flex System Fibre Channel switch modules. As the only 4-port HBA for Flex System, the FC5054 provides unmatched scalability and redundancy. In addition, the FC5054 has two separate ASICs with no bridge chip, so data flows directly to an independent PCIe bus for high availability without a single point of failure. It also allows for logical partitioning on IBM Power Systems™ compute nodes. The following figure shows the Flex System FC5054 4-port 16Gb FC Adapter. Figure 1. Flex System FC5054 4-port 16Gb FC Adapter Did you know? You can deploy faster and manage less when you combine Host Bus Adapters (HBAs) and Virtual Fabric Adapters (VFAs) that are developed by Emulex. Lenovo HBAs and VFAs use the same installation and configuration process, streamlining the effort to get your system up and running, and saving you valuable time. They also use the same Fibre Channel drivers, reducing the time to qualify and manage storage connectivity. And with the Emulex OneCommand Manager, you can manage Lenovo HBAs and VFAs that are developed by Emulex through the data center from a single console. Flex System FC5052 2-port and FC5054 4-port 16Gb FC Adapters 1 Part number information The following table shows the ordering part numbers and feature codes. Table 1. Ordering part numbers and feature codes Description Part number Feature code (x-config) Feature code (e-config) Flex System FC5052 2-port 16Gb FC Adapter 95Y2386 A45R EC23 Flex System FC5054 4-port 16Gb FC Adapter 95Y2391 A45S EC2E The following figure shows the Flex System FC5052 2-port 16Gb FC Adapter. Figure 2. Flex System FC5052 2-port 16Gb FC Adapter Features When compared to the previous-generation 8 Gb adapters, the new Gen5 16 Gb adapters deliver 6x the IOPS, improve response times by up to 75%, and deliver double the throughput speeds for Fibre Channel traffic. As a result, it is possible to support significantly more IOPS-driven workload and applications per HBA, reducing costs, power, and complexity. The Flex System FC5052 2-port 16Gb FC Adapter has these features: 2-port 16 Gb Fibre Channel adapter Single-ASIC controller using the Emulex XE201 design Auto-Negotiate to 16Gb, 8Gb, or 4Gb Up to 1.2 million IOPS on a single port (six times more IOPS than previous generation 8Gb FC HBAs) Cuts response times by up to 75% and doubles the throughput compared to the previous generation 8Gb FC HBAs Flex System FC5052 2-port and FC5054 4-port 16Gb FC Adapters 2 Exceeds 10 million hours mean time between failure (MTBF) with the most advanced data integrity protection (T10 PI) offload to protect against silent data corruption PCIe Express 3.0 x8 host interface (5 GTps) MSI-X support x86 Fibre Channel common driver model with the FC3052 8Gb Fibre Channel adapter, and FCoE on the CN4054 10 Gb Ethernet and Flex System x222, x240, and x440 LOMs Arbitrated loop (supported on 4Gb and 8Gb speeds only) Fabric Manager support The Flex System FC5054 4-port 16Gb FC Adapter has these features: 4-port 16 Gb Fibre Channel adapter Dual-ASIC (FC5054) controller using the Emulex XE201 design, which allows for logical partitioning on Power Systems compute nodes Auto-Negotiate to 16Gb, 8Gb, or 4Gb Up to 2.4 million IOPS (dual ASICs: 2x 1.2 million IOPS) Up to 1.2 million IOPS on a single port (six times more IOPS than previous generation 8Gb FC HBAs) Cuts response times by up to 75% and doubles the throughput compared to the previous generation 8Gb FC HBAs Exceeds 10 million hours mean time between failure (MTBF) with the most advanced data integrity protection (T10 PI) offload to protect against silent data corruption Two PCIe Express 3.0 x8 host interfaces (each 5 GTps), one for each ASIC ASICs treated as separate devices by the driver: No shared resources (that is, no PCIe bridge) between ASICs and each ASIC has its own firmware chip MSI-X support x86 Fibre Channel common driver model with the FC3052 8Gb Fibre Channel adapter, and FCoE on the CN4054 10 Gb Ethernet and Flex System x222, x240, and x440 LOMs Arbitrated loop (supported on 4Gb and 8Gb speeds only) Fabric Manager support Fibre Channel features The adapters offer the following features: Fibre Channel protocol SCSI (FCP-SCSI) and Fibre Channel Internet Protocol (FCP-IP). Point-to-point fabric connection: F-Port Fabric Login. Fibre Channel Arbitrated Loop (FC-AL) and FCAL-2 FL-Port Login. Fibre Channel services class 2 and 3. LUN Masking, an initiator-based LUN masking for storage traffic isolation. N_Port Id Virtualization (NPIV) allows multiple host initiator N_Ports to share a single physical N_Port, dramatically reducing SAN hardware requirements. FCP SCSI initiator and target operation. Full-duplex operation. Flex System FC5052 2-port and FC5054 4-port 16Gb FC Adapters 3 Supported servers The following table lists the Flex System compute nodes that support the adapters. Table 2. Supported servers Description Flex System FC5052 2-port 16Gb FC Adapter Y N Y Y Y Y N Y Y Y Y Y Flex System FC5054 4-port 16Gb FC Adapter Y N Y Y Y Y Y Y* Y Y Y Y * The FC5054 is only supported in slot 2 of the x280 X6, x480 X6, and x880 X6, not slot 4 For the latest information about the expansion cards that are supported by each blade server type, see ServerProven® at the following web address: http://ibm.com/servers/eserver/serverproven/compat/us/ I/O adapters are installed in the slot in supported servers, such as the p270, as highlighted in the following figure. Other Flex System servers have adapter slots in the same locations. Figure 3. Location of the I/O adapter slots in the Flex System p270 Compute Node Flex System FC5052 2-port and FC5054 4-port 16Gb FC Adapters 4 Supported I/O modules The adapters support the I/O modules that are listed in the following table. One or two compatible switches must be installed in the corresponding I/O bays in the chassis. Installing two switches means that all ports of the adapter are enabled. The FC5022 switches include a base number of port licenses, 12 or 24, depending on the part number that is ordered. Switch port licenses for the FC5022 switches can be used for internal or external ports. Each FC5052 requires one internal switch port for each of the two switches that are installed. Each FC5054 requires two internal switch ports for each of the two switches that are installed. Additional ports might be needed depending on your configuration. For more information, see the Product Guide for the Flex System FC5022 SAN Scalable Switch, available from http://www.redbooks.ibm.com/abstracts/tips0870.html. Table 3. I/O modules that are supported by the FC5052 2-port and FC5054 4-port 16Gb FC Adapters Description Part number Feature codes* (XCC / AAS) Support the FC5052 and FC5054 Flex System FC3171 8Gb SAN Switch 69Y1930 A0TD / 3595 No Flex System FC3171 8Gb SAN Pass-thru 69Y1934 A0TJ / 3591 No Flex System FC5022 16Gb SAN Scalable Switch 88Y6374 A1EH / 3770 Yes Flex System FC5022 24-port 16Gb SAN Scalable Switch 00Y3324 A3DP / ESW5 Yes Flex System FC5022 24-port 16Gb ESB SAN Scalable Switch 90Y9356 A2RQ / 3771 Yes * The first feature code that is listed is for configurations that are ordered through Lenovo System x® sales channels (XCC using x-config). The second feature code is for configurations that are ordered through the IBM Power Systems channel (AAS using e-config). Flex System FC5052 2-port and FC5054 4-port 16Gb FC Adapters 5 The following table shows the connections between adapters that are installed in the compute nodes and the switch bays in the chassis. Table 4. Adapter to I/O bay correspondence I/O adapter slot in the server Slot 1 Slot 2 Slot 3 (x440 / p460 only) Slot 4 (x440 / p460 only) Port on the adapter Corresponding I/O module bay in the chassis Port 1 Module bay 1 Port 2 Module bay 2 Port 3 (FC5054 only) Module bay 1 Port 4 (FC5054 only) Module bay 2 Port 1 Module bay 3 Port 2 Module bay 4 Port 3 (FC5054 only) Module bay 3 Port 4 (FC5054 only) Module bay 4 Port 1 Module bay 1 Port 2 Module bay 2 Port 3 (FC5054 only) Module bay 1 Port 4 (FC5054 only) Module bay 2 Port 1 Module bay 3 Port 2 Module bay 4 Port 3 (FC5054 only) Module bay 3 Port 4 (FC5054 only) Module bay 4 These adapters can be installed in any I/O adapter slot of a supported Flex System compute node. One or two compatible 16 Gb switch modules must be installed in the corresponding I/O bays in the chassis. Flex System FC5052 2-port and FC5054 4-port 16Gb FC Adapters 6 The connections between the FC5052 2-port adapters that are installed in the compute nodes and the switch bays in the chassis are shown in the following figure. The figure shows both half-wide servers, such as the x240 with two adapters, and full-wide servers, such as the x440 with four adapters. Figure 4. Logical layout of the interconnects between the FC5052 2-port adapters and I/O modules The connections between the FC5054 4-port adapters that are installed in the compute nodes and the switch bays in the chassis are shown in the following figure. Figure 5. Logical layout of the interconnects between the FC5054 4-port adapters and I/O modules Flex System FC5052 2-port and FC5054 4-port 16Gb FC Adapters 7 Operating system support The Flex System FC5052 2-port and FC5054 4-port 16Gb FC Adapters support the following operating systems. The compute node that the adapter is installed in might have different operating system support, so both operating system lists must be taken into account. For the latest information about the specific versions and the service packs that are supported, see the ServerProven website. Select the blade server, and then select the expansion card to see the supported operating systems: http://www.ibm.com/systems/info/x86servers/serverproven/compat/us/ Power Systems compute nodes: AIX 5L for POWER Version 5.3 AIX Version 6.1 AIX Version 7.1 IBM i 6.1 IBM i 7.1 IBM Virtual I/O Server Red Hat Enterprise Linux 5 for IBM POWER Red Hat Enterprise Linux 6 for IBM POWER SUSE LINUX Enterprise Server 11 for IBM POWER For the latest information about installing Linux on Power Systems, see the following website: http://www14.software.ibm.com/webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html x86 compute nodes: Microsoft Windows Server 2008 HPC Edition Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008, Datacenter x64 Edition Microsoft Windows Server 2008, Enterprise x64 Edition Microsoft Windows Server 2008, Standard x64 Edition Microsoft Windows Server 2008, Web x64 Edition Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 5 Server with Xen x64 Edition Red Hat Enterprise Linux 5 Server x64 Edition Red Hat Enterprise Linux 6 Server x64 Edition Red Hat Enterprise Linux 7 SUSE LINUX Enterprise Server 10 for AMD64/EM64T SUSE LINUX Enterprise Server 11 for AMD64/EM64T SUSE LINUX Enterprise Server 11 with Xen for AMD64/EM64T VMware ESX 4.1 VMware ESXi 4.1 VMware vSphere 5.0 (ESXi) VMware vSphere 5.1 (ESXi) VMware vSphere 5.5 (ESXi) For more information, see the installation instructions that are available at http://www.emulex.com/downloads/ibm.html. Flex System FC5052 2-port and FC5054 4-port 16Gb FC Adapters 8 Warranty There is a 1-year, customer-replaceable unit (CRU) limited warranty. When installed in a server, these adapters assume your system’s base warranty and any ServicePac® upgrade. Physical specifications The dimensions and weight of the adapters are as follows: Width: 100 mm (3.9 in.) Depth: 80 mm (3.1 in.) Weight: 13 g (0.3 lb) Shipping dimensions and weight (approximate): Height: 58 mm (2.3 in.) Width: 229 mm (9.0 in.) Depth: 208 mm (8.2 in.) Weight: 0.4 kg (0.89 lb) Regulatory compliance The adapters conform to the following regulatory standards: United States FCC 47 CFR Part 15, Subpart B, ANSI C63.4 (2003), Class A United States UL 60950-1, Second Edition IEC/EN 60950-1, Second Edition FCC - Verified to comply with Part 15 of the FCC Rules, Class A Canada ICES-003, issue 4, Class A UL/IEC 60950-1 CSA C22.2 No. 60950-1-03 Japan VCCI, Class A Australia/New Zealand AS/NZS CISPR 22:2006, Class A IEC 60950-1(CB Certificate and CB Test Report) Taiwan BSMI CNS13438, Class A Korea KN22, Class A; KN24 Russia/GOST ME01, IEC-60950-1, GOST R 51318.22-99, GOST R 51318.24-99, GOST R 51317.3.2-2006, GOST R 51317.3.3-99 IEC 60950-1 (CB Certificate and CB Test Report) CE Mark (EN55022 Class A, EN60950-1, EN55024, EN61000-3-2, EN61000-3-3) CISPR 22, Class A Flex System FC5052 2-port and FC5054 4-port 16Gb FC Adapters 9 Popular configurations The Flex System FC5052 2-port and FC5054 4-port 16Gb FC Adapters can be used in various configurations. The following figure shows the FC5054 4-port adapter installed in slot 2 and slot 4 of the x440, which in turn is installed in the chassis. The chassis is connected to an IBM V7000. The RAID functionality is provided by the external storage system. Figure 6. Example configuration The following table lists the parts that are used in the configuration. Table 5. Components that are used when connecting the FC5054 4-port 16Gb FC Adapter to external disk storage Part number/machine type Description Quantity 7917 Flex System x440 Compute Node 1 - 14 95Y2391 Flex System FC5054 4-port 16Gb FC Adapters 1 per server 8721-A1x Flex System Enterprise Chassis 1 00Y3324 Flex System FC5022 24-port 16Gb SAN Scalable Switch 1 or 2 88Y6416 Brocade 8Gb SFP+ SW Optical Transceiver 1 per FC cable 39M5698 1m LC-LC Fibre Channel Cable 1 for each V7000 connection 2076-124 V7000 1 This configuration requires additional V7000 features, such as drives and software licenses. They are not listed in the table. Lenovo provides extensive Fibre Channel testing to deliver full interoperability. For a full listing of supported Fibre Channel configurations, see the System Storage Interoperation Center (SSIC) website at http://ibm.com/systems/support/storage/ssic. Flex System FC5052 2-port and FC5054 4-port 16Gb FC Adapters 10 Related publications For more information, see the following resources: Lenovo Press Product Guides for Flex System servers and options: http://www.redbooks.ibm.com/portals/flexsystem?Open&page=pgbycat US Announcement Letter http://ibm.com/common/ssi/cgi-bin/ssialias?infotype=dd&subtype=ca&&htmlfid=897/ENUS113-133 Flex System Products and Technology by Lenovo, SG24-8255 http://www.redbooks.ibm.com/abstracts/sg248255.html?Open Flex System Interoperability Guide http://www.redbooks.ibm.com/fsig System x and Cluster Solutions configurator (x-config) https://ibm.com/products/hardware/configurator/americas/bhui/asit/install.html IBM Configurator for e-business (e-config) http://ibm.com/services/econfig/ Flex System FC5052 2-port and FC5054 4-port 16Gb FC Adapters 11 Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any other product, program, or service. Lenovo may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to: Lenovo (United States), Inc. 1009 Think Place - Building One Morrisville, NC 27560 U.S.A. Attention: Lenovo Director of Licensing LENOVO PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk. Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment. © Copyright Lenovo 2013-2015. All rights reserved. Flex System FC5052 2-port and FC5054 4-port 16Gb FC Adapters 12 This document was created or updated on January 23, 2015. Send us your comments in one of the following ways: Use the online Contact us review form found at: ibm.com/redbooks Send your comments in an e-mail to: [email protected] This document is available online at http://www.ibm.com/redbooks/abstracts/tips1044.html . Trademarks Lenovo, For Those Who Do and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. These and other Lenovo trademarked terms are marked on their first occurrence in this information with the appropriate symbol (® or ™), indicating US registered or common law trademarks owned by Lenovo at the time this information was published. Such trademarks may also be registered or common law trademarks in other countries. A current list of Lenovo trademarks is available on the Web at http://www.lenovo.com/legal/copytrade.html. The following terms are trademarks of Lenovo in the United States, other countries, or both: Flex System™ Lenovo® Lenovo(logo)® ServerProven® System x® The following terms are trademarks of other companies: Linux is a trademark of Linus Torvalds in the United States, other countries, or both. Microsoft, Windows, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both. Other company, product, or service names may be trademarks or service marks of others. Flex System FC5052 2-port and FC5054 4-port 16Gb FC Adapters 13
© Copyright 2024