JIG Inspectors Workshop Dubai: 4-5 February 2015 Draft Agenda Wednesday 4th February 18.30 Welcome Reception and Dinner Thursday 5th February 08.15 Welcome, Ground Rules and Safety Briefing – John Buxton JIG Standards 08.30 Looking Forward to Issue 12 – Ger O’Donnell and Tony Rowe - Process for Developing and Approving Updates Summary of Significant Changes JIG Inspection Process and Inspector Training 09.45 JIG Inspections Policy (May 2014) – Tony Conway/Tony Rowe 10.00 JIG Inspector Training and Accreditation – John Buxton 10.15 Coffee 10.45 JITS Update & Findings – Olan Ryan 11.15 HSSE Audits and JIG Inspections – Paul Heald 11.45 JIG Inspection Reports - Sylvain Duperrier 12.15 Break for Lunch 12.30 Lunch 13.30 Inspection Assessment Criteria – Inspector Survey on Proposals for Change and Feedback from Workshop Attendees – Sylvain Duperrier 14.15 Inspection Report Recommendations - Working Group Exercise – Anthony Kitson-Smith 15.15 Coffee Industry Developments 15.45 Fuelling Equipment Update – Bill Simpson 16.15 Aviation Fuel Filtration – Phil Rugen 17.00 Closing Comments – John Buxton & Tony Conway 17.30 Finish The following will deliver presentations and be available for the Q&A session at this workshop: John Buxton: JIG Workshop Chair, KPIAC Technical Services Director Tony Conway: JIG General Manager Ger O’Donnell: JIG Technical Forum Chair, Shell Aviation Operations Standards & Compliance manager Phil Rugen EI Filtration Committee Chair, Shell Aviation Fuel Handling Manager Dan Kadlecek Exxon Mobil Aviation Paul Heald JIG HSSE Committee, Exxon Mobil Aviation Sylvain Duperrier JIG Operations Committee, Air Total Inspection & Quality Control Manager Olan Ryan JIG Inspection Tracking System WG Chair, Air Total Inspection & Quality Control Anthony Kitson-Smith JIG Operations Committee, Consultant Bill Simpson: JIG Technical Forum Drafting Working Group, KPIAC Technical Services Tony Rowe: JIG Technical Manager
© Copyright 2024