PROTECTA
PROTECTA
ExExe eLED
LEDLINEAR
LINEAR
FLUORESCENT
FLUORESCENTREPLACEMENT
REPLACEMENT
The Protecta III has now been redesigned to accept LEDs,
bringing forward benefits such as the extended life and low
maintenance features which are key to the oil and gas industry.
Expected useful life to 70% of the initial lumens is 110,000
hours, but even when this is achieved the geartray which the
LEDs are mounted on can be replaced, similar to a traditional
lamp change. The LEDs are more powerful in lumens per watt
figures than all fluorescent tubes, proving that LED technology
is now truly a viable alternative.
One of the main benefits of LEDs is their ability to maintain a
steady lumen output across the complete ambient temperature
range and at low temperatures they greatly out perform
fluorescent lamps.
The complete geartray assembly which includes the LEDs and
driver can be retro-fitted into existing Protecta III fluorescent
product - bringing the existing enclosure up to date with the
very latest technology. The proven track record of the very
robust enclosure is not compromised as the complete enclosure
remains unchanged.
Standard Specification
Type of Protection
Ex e mb q (Increased Safety, Encapsulation,
Powder Filling)
ATEX Classification
Group II Category 2 GD
Area Classification
Zone 1 & 21 areas to IEC 60079-10 and IEC 50281-3
with installation to IEC 60079-14 and IEC 50281-1-2
Certificate
EC Type Examination Certificate Baseefa04ATEX0220
IECEx Certificate of Conformity IECEx BAS 09.0017
Features
Simple rugged construction
Long life LEDs
Retrofit geartray available
Contact Sales for further information
Full length easy access diffuser clamp
Coding
Enclosure
Reflector/Geartray
Entry
Termination
Installation
Control Gear
Relamping
Light Source
Ingress Protection
Electrical Supply
Battery
Duration
TBC
GRP body with polycarbonate cover
Aluminium
4 x M20 cable entries - 2 at each end
3 core 4mm² max. conductor with looping and 16A
rating through wiring
Two M8 tapped inserts located on the rear of
the body
Electronic Driver
Quick release diffuser clamp and hinged cover
Light Emitting Diode (LED) strips
Ex mb component certified (IECEx DEK 13.0025U)
IP66/67 to EN 60529
220-254V, 50/60Hz
Internal Ni-Cd (6V) (Emergency version only)
90 mins (Emergency version only)
Hinged cover
Standard fixing centres
Screwless mains terminals
DTS-01 deluge tested
LED Colour Temperature 4000K (CCT)
110,000 maintenance free hours
@ +25°C
70% initial lumens
ATEXCATEGORY
CATEGORY2 2
ATEX
Std. Cat No.
ZONE1 &1 &2121APPLICATIONS
APPLICATIONS
ZONE
Power Consumption
Delivered Output
Ambient °C
Weight
PRGE/02L/LE
30W
2178 lm
-40 to +55
5.9kg
PRGE/05L/LE
60W
4607 lm
-40 to +55
11.5kg
PRGE/02L/LE/EM
30W
2178 lm
-25 to +55
8.9kg
PRGE/05L/LE/EM
60W
4607 lm
-25 to +55
13.0kg
Options
- Suffix
to to
Catalogue
No.No.
Options
- Suffix
Catalogue
/M25
M25 entries
/LT
Low temperature to -40°C (Emergency)
/LBE
Looping both sides
/SC
/EL
Extra live termination facility
(to match emergency circuit)
Screwed connection terminal block
(up to 6mm² conductors)
/3H
/120
3 hour battery duration
Specific voltage (110/130)
Applications
Zone 1 and 2 hazardous areas • Offshore oil and gas platforms • Cold rooms • Chemical industry
Pharmaceutical industry • Sewage treatment plants • Process areas • FPSO’s and FSO’s vessels
Walkways • M.O.D. installations • Distilleries • Gas pumping stations
02L
Accessories
05L
Should be ordered separately
Catalogue Order Code
Pole mounting bracket assembly (38/42 diameter poles)
SPOL4-100001
Pole mounting bracket assembly (48/52 diameter poles)
SPOL4-100002
Pole mounting bracket assembly (58/62 diameter poles)
SPOL4-100003
Hook type ceiling bracket assembly
SPRO4-0005
Flush mounted wall bracket assembly
SPRO4-0006
Ceiling bracket assembly
SPRO4-0002
Wall mounting outreach bracket (18W/36W spigot entry /SE versions)
NPRO4-0007
Standard 18W wall mounting outreach bracket (use with SPRO4-0003)
NPRO4-0008
Standard 36W wall mounting outreach bracket (use with SPRO4-0003)
NPRO4-0012
Eyebolt mounting assembly
SPRO5-0005
Looping Kit (Allows looping from both ends of luminaire)
SPROT-0021
Product design and specifications are subject to change without notice, please check the Chalmit® website for latest specifications.
November 2014
Rev 2
Chalmit, PO BOX 5575, Glasgow G52 9AP
Tel: +44(0) 141 882 5555 Fax: +44(0)141 883 3704
www.chalmit.com [email protected]
®