CADDY ROD LOCK Threaded Rod Mounting System
®
CADDY ROD LOCK
®
Ph: 1-800-25-CADDY
www.erico.com
®
239
CADDY ROD LOCK Threaded Rod Mounting System
®
CADDY ROD LOCK Beam Clamps
®
CADDY ROD LOCK Beam Clamp
®
• Prefabricated assemblies easily lift
and lock into place, helping to
save time and money
• Easy “push-to-install” design
allows installers to simply push
the threaded rod through the
mounting hole, instantly holding it
in position
• Lock nut can be finger tightened, locking the rod
in place
• Works with slightly damaged threads and minor
burrs on the threaded rod
• Conforms with Federal Specification WW-H-171
(Type 23), Manufacturers Standardization Society
ANSI /MSS-SP-58 (Type 19 and 23)
Patent No.: 8,132,767
8,434,725
®
Material: Cast Iron
Finish: Electrogalvanized
®
CADDY ROD LOCK
Part
Number
Description
Static
Load
F1
Static
Load
F2
CRLB37EG
3/8” Rod, 1/8”–3/8” Flange
250 lb
500 lb
25 pc
Static Load 1 represents 1/8” to 3/16” (3 mm to 5 mm) flange thickness.
Static Load 2 represents 1/4” to 3/8” (6 mm to 10 mm) flange thickness.
For use on plain and electro zinc plated hardware only.
Recognizing that torque wrenches are generally not used or available on many job sites, the
setscrew should be tightened so it contacts the I-beam and then an additional 1/2 turn added.
CADDY ROD LOCK Beam Clamp,
Thick Flange
®
• Prefabricated assemblies easily lift and lock into
place, helping to save time and money
• Easy “push-to-install” design allows installers
to simply push the threaded rod through the
mounting hole, instantly holding it in position
• Lock nut can be finger tightened, locking the
rod in place
• Works with slightly damaged threads and
minor burrs on the threaded rod
• Conforms with Federal Specification WW-H171 (Type 23), Manufacturers Standardization
Society ANSI /MSS-SP-58 (Type 19 and 23)
Patent No.: 8,132,767
8,434,725
®
F2
Material: Cast Iron
Finish: Electrogalvanized
Part
Number
F
Description
CRLB50EG
1/2” Rod, 3/8”–3/4” Flange
1,100 lb
F1
F
25 pc
FM Approved for top mount applications only.
For use on plain and electro zinc plated hardware only.
Recognizing that torque wrenches are generally not used or available on many
job sites, the setscrew should be tightened so it contacts the I-beam and then an
additional 1/2 turn added.
®
Ph: 1-800-25-CADDY
www.erico.com
®
240
CADDY ROD LOCK Threaded Rod Mounting System
®
CADDY ROD LOCK Anchor Screw
®
• For use with concrete and solid
brick
• Prefabricated assemblies easily
lift and lock into place, helping
to save time and money
• Works with slightly damaged
threads and minor burrs on the
threaded rod
Patent No.: 8,132,767
8,434,725
F2
Material: Steel
Finish: Electrogalvanized
Part
Number
Description
CRLA37EG
3/8” Rod, 2 7/8” x 1 1/4” x 7/8”
F1
F
F
660 lb
25 pc
CADDY ROD LOCK
For use on plain and electro zinc plated hardware only.Tested in 3000 psi (20.67 MPa) concrete.
CADDY ROD LOCK Plywood Form
Preset Anchor
®
®
• Eliminate overhead drilling into building
structure – CADDY ROD LOCK Preset
Anchors are cast in place
• Nails hold the anchor in place during the
pour and easily break off with a strike of
a hammer once the plywood forms are
removed
• Easy “push-to-install” design allows installers
to simply push the threaded rod through
the mounting hole, instantly holding it in
position
• Works with slightly damaged threads and
minor burrs on the threaded rod
• Prefabricated assemblies easily lift and lock
into place, helping to save time and money
• Plastic flange acts as insert locator when the
forms are removed
• Suitable for use in seismic zones
®
F2
Material: Steel
Finish: Electrogalvanized
Part
Number
Patent No.: 8,132,767
8,434,725
Patent Pending
F
Description
F1
F
CRLW37EG
3/8” Rod
1,407 lb
25 pc
CRLW50EG
1/2” Rod
1,605 lb
25 pc
Ph: 1-800-25-CADDY
www.erico.com
®
241
CADDY ROD LOCK Threaded Rod Mounting System
®
CADDY ROD LOCK L-Bracket
®
• Easy “push-to-install” design allows installers
to simply push the threaded rod through the
mounting hole, instantly holding it in position
• Prefabricated assemblies easily lift and lock into
place, helping to save time and money
• Multiple attachment holes support the use
of either self-drilling screws or bolts, offering
installation options for concrete, wood, and steel
structures
• Lock nut can be finger tightened, locking the rod
in place
• Integrated adjustment nut enables fine tuning
the system height up or down
• Extremely useful in tight spaces where wrenches
are difficult to use
• Conforms with Federal Specification WW-H-171
(Type 23), Manufacturers Standardization Society
ANSI /MSS-SP-58 (Type 19 and 23)
Patent No.: 8,132,767
8,434,725
Patent Pending
®
F1
®
CADDY ROD LOCK
F2
Material: Steel
Finish: Electrogalvanized
Part
Number
Description
CRLL37EG
3/8” Rod
F
F
700 lb
25 pc
Follow fastener manufacturer’s recommended shear and pull-out strength when fastening to the
structure.
Fastener not included. Install in accordance with applicable code.
CADDY ROD LOCK Nut
®
• Easy “push-to-install” design allows installers
to simply push the threaded rod through the
mounting hole, instantly holding it in position
• Fast installation onto long threaded rods –
push the nut in place instead of threading it
up the rod
• Excellent alignment and easy fine adjustment
by spinning the nut
• Extremely useful in tight spaces where
wrenches are difficult to use
F2
Material: Steel
Finish: Electrogalvanized
Part
Number
Description
CRLN37EG
3/8” Rod
Patent No.: 8,132,767
8,434,725
Patnet Pending
F
1,350 lb
F1
F
25 pc
Ph: 1-800-25-CADDY
www.erico.com
®
242
CADDY ROD LOCK Threaded Rod Mounting System
®
SN Series Nut
• Allows side mounting of nut to
threaded rod
• Reduces the need for threading
compared to standard nuts and
washers
• Ideal for retrofit projects, such
as trapeze installations
• Works with slightly damaged
threads and minor burrs on the threaded rod
• Reduces installation time up to 50%
F1
Part
Number
Description
SN25
1/4” Rod
500 lb
100 pc
SN37
3/8” Rod
1,350 lb
100 pc
SN50
1/2” Rod
2,250 lb
100 pc
F
F
®
For use on plain and electro zinc plated hardware only.
CADDY ROD LOCK
F2
Material: Steel
Finish: Electrogalvanized
CADDY ROD LOCK Channel Nut
®
• Provides fast universal
attachment of threaded rod
and hardware to standard strut
profiles
• Can be used to prefabricate
assemblies which can be
quickly pushed onto previously
installed threaded rods
• Works with slightly damaged threads
and minor burrs on the threaded rod
F2
Material: Cast Iron
Finish: Electrogalvanized
Part
Number
Description
CRLS37EG
3/8” Rod
F
750 lb
For use on plain and electro zinc plated hardware only.
Ph: 1-800-25-CADDY
www.erico.com
Patent No.: 8,132,767
8,434,725
®
243
F1
F
100 pc
CADDY ROD LOCK Threaded Rod Mounting System
®
CADDY ROD LOCK Strut,
Perforated
®
• CADDY ROD LOCK
technology allows for the
quick creation, installation,
and adjustment of multi-level
trapeze assemblies
• Ready to use out of the box
and eliminates the need for
cutting and preparing sections
of strut
• Easy “push-to-install” design allows
installers to simply push the threaded
rod through the mounting hole, instantly
holding it in position
• Integrated adjustment nut enables fine
tuning the system height up or down
• Lock nut can be finger tightened, locking
the rod in place
• Works with all accessories that fit standard
A or C type strut channels
®
F2
F1
®
CADDY ROD LOCK
Material: Steel
Finish: Pregalvanized, Electrogalvanized
Patent No.: 8,132,767
8,434,725
Patent Pending
Part
Number
F
Description
F
Strut Type: A
CRLP237L14
A Strut, 3/8” Rod, 16”
2,668 lb
5 pc
CRLP237L18
A Strut, 3/8” Rod, 20”
2,075 lb
5 pc
CRLP237L22
A Strut, 3/8” Rod, 24”
1,698 lb
5 pc
CRLP237L26
A Strut, 3/8” Rod, 28”
1,437 lb
5 pc
CRLP237L38
A Strut, 3/8” Rod, 40”
983 lb
5 pc
CRLP237L50
A Strut, 3/8” Rod, 52”
642 lb
5 pc
CRLP137L14
C Strut, 3/8” Rod, 16”
789 lb
5 pc
CRLP137L18
C Strut, 3/8” Rod, 20”
613 lb
5 pc
CRLP137L22
C Strut, 3/8” Rod, 24”
494 lb
5 pc
CRLP137L26
C Strut, 3/8” Rod, 28”
354 lb
5 pc
CRLP137L38
C Strut, 3/8” Rod, 40”
166 lb
5 pc
Strut Type: C
Static loads are assumed to be uniformly distributed and include a hole factor of 0.92.
The load applied to CADDY ROD LOCK Strut should include a factor of safety appropriate for the
application in which the strut is being used.
CADDY ROD LOCK Strut must be installed with the open side of the channel facing up.
For indoor applications only.
Ph: 1-800-25-CADDY
www.erico.com
®
244
CADDY ROD LOCK Threaded Rod Mounting System
®
CADDY ROD LOCK Telescoping
Strut Replacement
®
• Easy “push-to-install” design
allows installers to simply push
the threaded rod through the
mounting hole, instantly holding
it in position
• Ready to use out of the box and
eliminates the need for cutting
sections of strut
• Telescopes to the desired length and then
pushes onto the threaded rod
• Integrated adjustment nut enables fine
tuning the system height up or down
• Lock nut can be finger tightened, locking
the rod in place
• Allows for the quick creation, installation,
and adjustment of multi-level trapeze
assemblies
• Supports up to four 2” (50 DN) conduits
or four 2” (50 DN) water filled pipes at 10’
(3 m) spacing
• Works with the KBT Wire Basket Tray Clip
for securing wire basket cable tray
• Works with SCH Single-Piece Strut Clamps
®
CADDY ROD LOCK
Patent No.: 8,132,767
8,434,725
Patent Pending
F2
Material: Steel
Finish: Pregalvanized
Part
Number
Description
TSR20038RL
3/8” Rod
Ph: 1-800-25-CADDY
www.erico.com
F
200 lb
®
245
F1
F
25 pc
CADDY ALL-IN-ONE
®
We asked electrical contractors
what problems they face and
how CADDY innovation can help
meet their needs. We listened to
what they do today and heard a
consistent message: Find a better
way to mount, wire and install
electrical devices, such as switches
and outlets, on the job or offsite.
Then the CADDY team designed
and built ONE system that meets
many of the different installation
methods and preferences of today’s
electrical contractor.
®
• Complete assembly that is ready to use
right out of the box and installs with
just two screws
• Rigid back plate functions as a far-side
support and is resistant to bending
• Box remains fixed in place when mud
ring is removed (on applicable models)
• Open-back design offers faster
and easier access to install conduit
connectors or wiring
• Stocked inventory - available when you
need it
• Made in the USA
Ph: 1-800-25-CADDY
www.erico.com
®
246