Call for Papers Brochure
THE 9th EDITION OF IPTC Conference: 6–9 December 2015 Exhibition: 7–9 December 2015 Qatar National Convention Centre Doha, Qatar Technology and Partnerships for a Sustainable Energy Future Call for papers Images courtesy of Qatar Petroleum THE LARGEST MULTI-SOCIETY, MULTI-DISCIPLINARY OIL AND GAS EVENT IN THE EASTERN HEMISPHERE Submission Deadline: 28 February 2015 Host Organisation Sponsoring Societies Co-Host Organisation www.iptcnet.org/2015/doha 7th IPTC Sponsorship Opportunities Welcome Letter from th 9 IPTC Conference Programme Co-Chairpersons Dear Industry Colleagues, Khalid Al-Hitmi Manager Gas Development, Qatar Petroleum Sabeur Mansar General Manager–Development and Commercial, Shell The International Petroleum Technology Conference (IPTC) is a multi-disciplinary event sponsored by four leading industry societies—American Association of Petroleum Geologists (AAPG), European Association of Geoscientists & Engineers (EAGE), Society of Exploration Geophysicists (SEG), and Society of Petroleum Engineers (SPE). Returning to Doha, Qatar, the 9th edition of IPTC will be held 6–9 December 2015, with the theme: “Technology and Partnerships for a Sustainable Energy Future.” IPTC is renowned for its exceptionally high standard of technical programmes, and with the experience and dedication of the programme committee, the 9th edition will be no exception. We highly encourage you to be part of this event by submitting your paper proposals for consideration by the programme committee. By submitting a paper proposal you have the opportunity to: • Share your experiences, innovations and best practices with the global E&P community • Present your technological advances and achievements • Have you paper on the multi-society library, OnePetro.org , and the conference proceedings • Raise your company’s technical profile A full list of technical categories and submission guidelines are available in this call for papers. Submit your abstracts online at www.iptcnet.org/2015/doha before 28 February 2015. Regards, Khalid Al-Hitmi Qatar Petroleum Sabeur Mansar Shell Executive Committee Co-Chairpersons Saad Al Kaabi, Managing Director, Qatar Petroleum Andy Brown, Upstream International Director, Shell Engineering Projects and Facilities Subcommittee Co-Chairpersons Faris Ali Khoori, UZ750 Deputy PS Manager, ZADCO Khalid Al-Hemaidi, Operations Projects Manager, RasGas Conference Programme Co-Chairpersons Khalid Al-Hitmi, Manager Gas Development, Qatar Petroleum Sabeur Mansar, General Manager–Development and Commercial, Shell Mid-Stream Gas Subcommittee Co-Chairpersons Adriaan Spaander, Business Development Manager and General Manager LNG Development, Shell Essa Matar Al-Kuwari, Head of Common Facilities, Qatar Petroleum AAPG Subcommittee Co-Chairpersons Pinar Yilmaz, Advisor Upstream External Projects, ExxonMobil Robert Ruchinski, Business Development Manager–Formation Evaluation, Weatherford EAGE Subcommittee Co-Chairpersons Dominique Guerillot, Head of Subsurface Research, Qatar Petroleum Thierry Charles, Geoscience & Reservoir Manager, Total SEG Subcommittee Co-Chairpersons Daniel Van Hulle, Vice President Geomarket Director, CGG Said Mahrooqi, Head Geophysical Operations – XGO, Petroleum Development Oman SPE Subcommittee Co-Chairpersons Jamal Khonaifer, Manager of Production and Facilities Development, Maersk Oil Michael Casper Gunningham, WRM Advisor, Maersk Oil www.iptcnet.org/2015/doha 7th IPTC Sponsorship Opportunities 9th IPTC Technical Categories 6–9 December 2015, Doha, Qatar 1. E&P GEOSCIENCE CHALLENGES • Clastic and Carbonate Reservoirs • Deep Basin Plays • Deepwater Exploration Challenges • E&P Geoscience Challenges in Middle East and North Africa • New Exploration Frontiers in Middle East • Outcrop Analogues using LIDAR/GPR/ Remote Sensing • Paleozoic Exploration • Red Sea Exploration Challenges • Redevelopment of Mature Fields • Reservoir Geoscience • Reservoir Management • Source Rocks • Tectonic History and Basin Evolution • Tight Reservoirs (Unconventionals) • Trapping Styles • Upscaling 2. THE PETROLEUM SYSTEM EVALUATION: FROM SOURCE TO TRAP • Case Studies of Petroleum Systems • Maturation History • Migration Pathways and Systems (Including both Oil and Gas Phases) • Source Rocks: Type, Volume, Distribution, etc. • Trapping Mechanisms and Styles, and the Accumulation of Hydrocarbons • The Petroleum System in Foreland and Overthrust Settings 3. ADVANCES IN GEOPHYSICS • Advances in Multiple Elimination • Advances in Non-Seismic Geophysics • Anistropy • Borehole Geophysics including 3D VSP • Full Waveform Inversion • Geophysical Challenges in the Near Surface • Low Frequency/Broadband • Multi-Component Seismic • New Advances in Seismic Acquisition, Processing, and Imaging • Ocean Bottom Seismic • Passive Seismic • Simultaneous Seismic Acquisition • Time-Lapse (4D) • Time-Lapse Seismic Acquisition and Processing 4. RISK AND UNCERTAINTY MANAGEMENT • Case Studies and Best Practices • Mitigating and Reducing Risk in Exploration Production and Development • Scenario Analysis • Uncertainty Quantification • Value of Information Quantification 5. ADVANCED GEOLOGICAL CONCEPTS IN SILICICLASTICS • Depositional Environment (Non-Marine to Deepwater) • Diagenesis and Reservoir Quality Controls in Clastics • Low Resistive Reservoirs • Modern Analogues • New Sequence Stratigraphic Concepts • Sandbody Architecture • Sandstone Reservoir Characterisation 6. ADVANCED GEOLOGICAL CONCEPTS IN CARBONATES • Carbonate Diagenesis • Low Resistive Reservoirs • Microporosity • Mixed Carbonate-Siliciclastic-Evaporite Systems • Modern Analogues • Reservoir Characterisation and Quality Prediction • Reservoir Heterogeneity and Flow-Unit Definition • Reservoirs in Karst Rock • Reservoirs in Tight Carbonates • Sequence Stratigraphic Concepts in Carbonates 7. GEOPHYSICAL RESERVOIR CHARACTERISATION • 3D Visualisation • Advanced Geophysical Methods for Defining Carbonate Reservoirs • Attenuation • AVO and Seismic Attributes • Calibration • Exploring Inter-Well Reservoir Space • Facies Classification • Fluid Prediction • Probabilistic Techniques • Rock Physics and Modelling • Seismic Fluid Signal Detection and Mapping • Seismic Inversion • Spectral Decomposition • Time-Lapse (4D) • Time-Lapse Geophysical Interpretation 8. UNCONVENTIONAL OIL AND GAS • Approaches to Mapping in Unconventional Plays • Basin Analysis for Unconventional Plays • Coal Bed Methane • Formation Evaluation in Unconventional Reservoirs • Heavy Oil • Key Factors to Well Design Optimisation • Optimization of Well Locations • Reserves Assessment for Unconventionals • Shale Gas • Shale Oil • Techniques to Appraising Characterising & Monitoring Unconventional Reservoirs • Tight Gas • Tight Oil • Ultra Sour Gas 9. STRUCTURAL DEVELOPMENT AND BASIN EVOLUTION • Application of Field Work • Extensional and Strike-Slip Tectonics • Global Analogues • HC System Dynamics • Inverted Basins • Regional Stress and Strain Analysis • Remote Sensing Applications • Reservoir Connectivity • Reservoir Distribution in these Settings • Salt Tectonics • Structural and Stratigraphic Traps • Structural Restoration 10. FAULT AND FRACTURE CHARACTERISATION • Case Studies of Fracture Plays • Compartmentalisation and Connectivity of Reservoirs • Effects of Fault Reactivation on Seals and Reservoir Integrity • Exploration in Fractured Basement Plays • Fracture Network Modelling • Fracture Porosity Prediction • Fracture Prediction and Modelling • Fractured Reservoirs • New Technology and Techniques in Fracture Detection and Delineation • Seal Analysis and Risk Assessment 11. GEOCHEMISTRY IN EXPLORATION AND PRODUCTION DEVELOPMENT • Fluid Characterisation • New Technologies and Methods in Geochemistry • Origin of Tarmats and Asphaltenes • Production Allocation • Reservoir Compartmentalisation • Source Rock Characterisation • Tracing Diagenesis using Isotope Analysis • Well Integrity Studies Properties • Lithofacies, Diagenesis, and Reservoir Quality • Optimum Geologic Modelling Workflow • Outcrop Analogues using Imaging • Petrophysical Input to Geologic Modelling • Quality Control in Modelling • Reservoir Characterisation for Model Construction • Reservoir Quality Prediction • Uncertainty Management 13. FULL LIFE CYCLE PLANNING • Development Strategy • Economic Evaluation • Improved Long Term Recovery • Integrated Asset Modelling • Post Depletion Strategies (Abandonment, Utilisation, Storage, etc.) • Production Forecast • Reserves and Resource Evaluation • Reservoir Appraisal 14. INTEGRATED RESERVOIR MANAGEMENT • 4D Seismic and Geophysical Techniques • Depletion Management • Digital/Intelligent Field Technology • Fluid Sampling Analysis • Integration of Production and Performance Data • Pore Pressure Prediction, Reservoir Integrity, and Containment • Sampling Analysis (PVT, Core Studies, etc.) • Surveillance and Monitoring • Tracer and Geochemical Based Monitoring • Unconventional Reservoirs: Production/ Reservoir Monitoring • Well Testing and Production Logging 15. EOR/IOR RESERVOIR • Case Studies • Chemical • EOR Potential and Economics • Enhanced Gas Recovery • Gas Injection (Nitrogen, CO2, etc.) • Low Salinity Waterflooding • Microbial (MEOR) • New Technologies • Thermal • Water Conformance Technologies • Waterflooding 12. GEOLOGIC MODELLING: FROM ROCKS TO RESERVOIR FLOW MODELLING 16. RESERVOIR NUMERICAL SIMULATION AND CHARACTERISATION • Case Histories of Integrated Geologic Modelling • Challenges in Modelling Stacked Reservoirs • Conditioning Models with Seismic, Stratigraphic, and Production Data • Geostatistics in Geologic Modelling • Integration of Rock Typing and Reservoir • Gridding Discretisation and Solvers • History Matching • Integrated Assets Modelling • New Generation Simulators • Pore Scale Modelling • PVT/SCAL • Streamline Simulation www.iptcnet.org/2015/doha www.iptcnet.org Submission Deadline: 28 February 2015 E&P GEOSCIENCE Technical Categories • Uncertainty and Optimisation & Reservoir Management • Unconventional Reservoirs (Tight Gas/Oil, Shale, CBM) • Upscaling • Perforating, Logging, and Stimulation • Real-Time Analysis • Real-Time Operations Centre • Tubulars • Wellbore Construction Fluids (Mud/Cement) Maturation Process • Scheduling and Execution • Well and Reservoir Surveillance • Well Reservoir and Facility Management (WFRM) Strategy • Risk Management and Management of Change • Standards and Quality Management • Supply Chain Management • Value Engineering 17. REGIONAL FOCUS TOPICS PRODUCTION AND OPERATIONS 25. SMART FIELDS AND COLLABORATIVE WORK ENVIRONMENTS 21. OPERATIONS, LOGISTICS, AND UTILITIES • Collaboration Centres and Communication Tools • Control Systems • Data Management • Exception Based Surveillance and Real-Time Monitoring • Field of the Future, Digital Oilfield • Intelligent Operators and Real-Time Operations • Multi-Skilling • Remote Operations • Smart Wells • Social Media 29. CONCEPT ENGINEERING, CONSTRUCTION, AND COMMISSIONING (THE 3 CS) DRILLING AND COMPLETIONS 18. OPTIMISATION OF WELL PLANNING AND EXECUTION • Artificial Lift • Case Studies • Extended Reach Drilling • Fracturing and Stimulation • Geomechanical Considerations • Intelligent Well Completions • Maximum Reservoir Contact • Performance Drilling • Sand Control and Sand Management • System Optimisation (Drilling and Completions) • Unconventional Wells • Water Injection Well Design • Well Intervention (Workover) • Wellbore Quality Considerations 19. CHALLENGES AND ADVANCES IN WELL CONSTRUCTION AND COMPLETION • Deep Water • High Pressure/High Temperature Drilling • Legislation • Managed Pressure Drilling and Underbalanced Drilling • Multi-Layer Reservoir Completions • Multi-Stage Fractured Horizontal Wells • Sour/Corrosive Environment • Ultra Deep Drilling • Well Abandonment • Well Integrity 20. ADVANCEMENTS AND CHALLENGES IN DRILLING TECHNOLOGY APPLICATION • Completion Diagnostics • Drilling Equipment • Drilling Systems Automation • Horizontal Wells • In Drilling, Development, Facilities, Production Optimisation • Intelligent Completions • Multilateral Wells • Multi-Stage Fracturing • MWD/LWD Technology • Nanotechnology • Accommodation and Catering • Contracts—Incentivisation • Cost Management Systems—Cost Reporting and Control • Heavy Oil • Integrated Activity Planning and Scheduling • Logistics—Marine, Road, Air Transport, Telecommunications • Metering and Allocation • Onshore/Offshore Operations • Power Generation • Steam, Air, Heating, Cooling, Plant Instrument Air, Drain Systems • Sulphur • Warehousing and Stock Management • Waste Management 22. MAINTENANCE, RELIABILITY, AND INTEGRITY • Computerised Maintenance Management Systems • Corrective Maintenance and Intervention • Corrosion Management • Equipment Strategies and Sparing Philosophy • Inspection and Monitoring • Integrity Strategy • Operating Envelopes • Pipeline Maintenance (Including Pigging) • Preventative Maintenance • Shutdowns and Turnarounds • Well Integrity and Intervention 23. PRODUCTION CHEMISTRY • Bacteria Management • Chemical Management • Corrosion Inhibition • Flow Assurance • Hydrate Inhibition • Mixing Fluid Streams • Separation • Slugging • Smart Chemicals 24. WELL RESERVOIR AND FACILITY MANAGEMENT • Data and Data Management • Exception Based Surveillance • Integrated Production System Modelling • Integrated Reviews • Key Performance Indicators • Monitoring and Learning • Opportunity Identification and Opportunity 26. BREAKTHROUGH TECHNOLOGIES • Application of Laser, Bio, or Nanotechnology • Artificial Intelligence • Automation • Ergonomics • In Drilling, Development, Facilities, Production Optimisation • Remote Operations • Robotics • Visualisation Technologies 27. WATER MANAGEMENT AND INJECTION AND EOR IN OPERATIONS AND PRODUCTION • Acid Gas Injection • Chemicals • CO2, Steam and Chemical Injection • CO2 Generation, Transport, and Storage • Disposal and Reuse Options • Gas Cycling • Gas/Nitrogen Injection • Produced Water Irrigation • Produced Water Management • Water and Gas Injection • Water Injection Well Design • Water Treatment and Water Quality ENGINEERING PROJECTS AND FACILITIES 28. PROJECT MANAGEMENT, CONTRACTING, AND QUALITY • Contract Strategy • Contracting and Procurement • Engineering • Interface Management • Local Content (Workforce Welfare) • Project Financing • Project Management Systems—Integrated Planning www.iptcnet.org/2015/doha • Complex Facilities • Concept Selection—Scoping and Feasibility • Design—Front-End Engineering Design • Handover • Integrated Planning • Operations Readiness • Procedures Development for Commissioning • Reliability Availability Management • Transient Modelling 30. BROWNFIELD AND CASE STUDIES • Artificial Islands • Changing Fluids Mix/Properties • Debottlenecking • Deep Water/Shallow Water • Integrated Projects (Onshore/Offshore) • Major Projects • Middle East/Far East • Minor Projects • Production Optimisation • Sour Field Projects • Utilities (Steam, Water, Chlorine, Heating Systems/Cooling Systems, Plant Instrument Air, Power) 31. FACILITIES DISCIPLINE ENGINEERING • Civil and Structural Engineering • Gas Export/Import Facilities • Instrument, Control, Electrical • Machinery and Rotating Equipment • Materials and Corrosion • Mechanical Engineering • New Port/Harbor Project • Pipelines • Process Engineering • Process Safety • Subsea • Water Treatment and Disposal FIELD DEVELOPMENT 32. CONVENTIONAL OIL • Artificial Lift • Field Development Studies • Floating Production Storage and Offloading Development • Fracturing and Stimulation • Offshore Development • Produced Water Management and Disposal • Production Chemistry and Flow Assurance • Sand Control and Sand Management Submission Deadline: 28 February 2015 • Brown Fields • Carbonate and Fractured Reservoirs • CO2 Sequestration and Utilisation • Heavy Oil • Marginal Fields • Natural Gas Resources • Sour Gas Fields Technical Categories • Enhanced Gas Recovery • Gas Deliquification • GTL • LNG and Floating LNG • Multiphase Metering • Produced Water Management and Disposal • Production Chemistry and Flow Assurance • Production Monitoring and Control • Sour Gas 34. BROWNFIELD AND REDEVELOPMENT • Decline Management • Field Life or Facilities Extension • Improved and Enhanced Recovery • Infrastructure • Land/Island Use • Reengineering and Rejuvenation • Waterflooding 35. UNCONVENTIONAL RESOURCES AND MARGINAL DEVELOPMENT • Coalbed Methane • Coal-to-Liquid • Gas Hydrate • Leveraging Existing Infrastructure • Marginal Fields and Reservoirs • Minimisation and Modularisation • Reuse of Facilities and Equipment • Shale Gas/Oil • Tight Gas 36.DECOMMISSIONING • Artificial Reefs • Facilities Cleaning • Monitoring • People Redeployment • Recycling • Remediation and Reinstatement • Structural Facilities Removal MID-STREAM GAS *Based on the 7th IPTC Survey Results 37. GAS VALUE CHAIN • CNG (Compressed Natural Gas) • Cross-Border Pipelines • Development of Reticulated Gas Networks • Gas Distribution and Storage (Underground Storage) • Gas to Chemicals • Gas to Power • Gas Transportation • Hydrogen Mobility • Lessons from Major Gas Development Projects • Low BTU Gas Utilisation • Markets for LPG, Sulphur, and Gas Condensates • Monetisation of Stranded/Remote Gas • NGV (Natural Gas Vehicles) 38.LNG • Achieving and Sustaining High Reliability in LNG • Development in Liquefaction Technologies • Environmental Footprint of LNG Projects • Floating Gasification Terminals • Floating LNG • LNG for Transportation • LNG Market Trends and Globalisation • LNG Projects Case Stories • LNG Ship Design • Midstream/Upstream Interface Optimisation • Mini-LNG • New Brownfield Modifications and Upgrades • Process Safety in LNG • Re-Gasification • Unconventional Gas to LNG 39.GTL • Challenges in the Advancement of GTL Technologies • Environmental Footprint of GTL Projects • GTL Catalyst Developments • GTL Efficiency • GTL Integration Challenges • GTL Products Characteristics • GTL Products Markets • GTL Products Work-Up Technologies • GTL Project Case Stories • GTL Project Economics • Operational Challenges in GTL • Mini-GTL • Syngas Technologies • Unconventional Gas to GTL • CO2 Capture Technology • Corrosion and Metallurgy in Gas Processing • Emerging Technologies in Gas Processing • Gas Compression • Gas Conversion Technologies • Gas Dehydration • Gas Storage Technologies • Gas Treatment • Helium and Other Trace Gasses Extraction • Hydrate Technology/Gas Pipeline Flow Assurance • Management of Mercury in Feed Gas • N2 Rejection Technologies • NGL Recovery Technologies • Sour Gas Handling and Treating • Sulphur Production, Storage, and Export • Technology for Gas Market Development • Carbon Pricing and Trends • CDM (Clean Development Mechanisms) Projects • CO2 Sequestration • Flare Reduction and Recovery OVER-ARCHING INDUSTRY ISSUES—HSE, SECURITY, HUMAN RESOURCES, BUSINESS, AND SOCIAL CHALLENGES 42. HEALTH AND SAFETY • Asset Integrity • Contingency Emergency Response Planning • Crisis Management • HSSE Management Systems • Human Factors • Job Safety Planning • Labour Welfare • Management of Contractors • Management of Emergency Hydrocarbon Releases • Process Safety Management • Road Transportation Safety • Safety During Construction • Safety During Operations • Safety in Facility Design • Safety in Transportation • Safety Leadership, Culture, and Human Factors • Simultaneous Operations (SIMOPs) 43.ENVIRONMENT 40. GAS TECHNOLOGY 41. CARBON MANAGEMENT AND MARKETS • Gas/Solar Hybrid Technology • GHG Emissions Reduction • Impact of Policy on Carbon Management • Processing, Transportation, and Disposition of High CO2 Gas • Trends in Carbon Intensity Reduction • Air Emissions • Byproduct Solutions (Sulphur, Bio-Waste) • Carbon Capture and Storage • Cutting Re-Injection Methods • Cuttings Disposal • Fluid Remediation (Drilling and Produced Fluids) • Handling of Radioactive Sources • New Technology for Air Emission Control • Overboard Water • Source Water and Waste Water Management • Unconventional Resource Development • Waste Management • Water Disposal 44.SECURITY • Cyber Security and Data Security • Data Management/Security of Data • Piracy • Sanctions and Embargoes • Site Security and Mitigation • Terrorism, Hijacking, and Kidnapping 45. HUMAN RESOURCES • Attracting Talent to the Industry • Career Development • Data and Knowledge Sharing www.iptcnet.org/2015/doha • Empowering Women in the Industry • Government/Regulatory Policies and Incentives • Human Factors • Management of Contractors • Promoting the Energy Industry to the Youth • Promoting Women in the Energy Industry • Recruitment and Retention • Strategic Resource Planning and Management in a Cyclical Industry • Talent Management • Training • Training and Competency • Workforce Diversity 46. SOCIAL RESPONSIBILITY • Community Development • Corporate Social Responsibility • Corporate Social Responsibility/Community Development Projects • Education and Capability Building • Local Skills Development • Nationalisation 47. LESSONS LEARNT AND KNOWLEDGE MANAGEMENT • Building Organisational Capability • Business Continuity • Data and Knowledge Sharing • Data Management and Data Architecture • Lessons Learnt Culture • Teamwork • Use of Social Media • Use of Visual Media 48. COMMERCIAL AND RISK MANAGEMENT • Commercial Structures (Tax Royalty, Production Sharing Agreements, Joint Ventures, etc.) • Cross Border Development and Production • Crossing Agreements • Economical and Commercial Risk • Financing • Government to Government Agreements • Government/Regulatory Framework and Incentives • Health and Safety Risk Management • Management in a Cyclical Industry • Political Risk • Processing Agreements • Risk Assessment and Mitigation • Sales Agreements • Sharing Agreements • Unitisation and Redetermination 49. AUDITS AND QUALITY CONTROL • Process and Management Audits • Quality Management • Technical Audits Submission Deadline: 28 February 2015 33. CONVENTIONAL GAS AND INTEGRATED GAS 6–9 December 2015 Qatar National Convention Centre Doha, Qatar GUIDELINES FOR ABSTRACT SUBMISSION Oral Presentations/Poster Presentations for the Conference will be selected from abstracts submitted to the Conference Programme Committee. The Programme Committee will consider all abstracts submitted by the deadline of 28 February 2015. Early submission is particularly important to ensure that the Committee has ample time to review the abstracts. Authors are strongly encouraged to submit their abstracts electronically at the IPTC website, www.iptcnet.org/2015/doha. ABSTRACT CONTENT A proper review of your abstract requires that it contain adequate information on which to make a judgement. Written in English and containing a maximum of 450 words, abstracts should be summarised into four (4) specific paragraphs: 1. OBJECTIVES/SCOPE Please list the objectives and/or scope of the proposed paper. (25-75 words) 2. METHODS, PROCEDURES, PROCESS Briefly explain your overall approach, including your methods, procedures and process. (75-100 words) TECHNICAL CATEGORIES Use the technical categories included in this leaflet to indicate the category that best describes your abstract. A primary choice is required; however, a secondary choice is optional. Abstracts are evaluated on the basis of the information supplied on the abstract form in accordance with the following criteria: 1. The proposed paper or poster must contribute to petroleum technology or be of immediate interest to the oil and gas industry, and should contain significant new knowledge or experience in the oil and gas industry. 2. Data in the abstract must be technically correct. 3. The proposed paper or poster may present information about equipment and tools to be used in exploration and production. Such abstracts must show the definite applications and limitations of such equipment and should avoid undue commercialism and extensive use of trade names. 4. The substance of the proposed paper or poster must not have been published previously in trade journals or in other professional or technical journals. 5. Prior to abstract submission, clearance must be obtained. Any problems concerning clearance should be outlined when the abstract is submitted. 3. RESULTS, OBSERVATIONS, CONCLUSIONS Please describe the results, observations and conclusions of the proposed paper. (100-200 words) IPTC Sponsorship and Exhibitor Opportunities Available. For more information, visit www.iptcnet.org/2015/doha or contact Sylvia Ansara at [email protected]. 4. NOVEL/ADDITIVE INFORMATION Please explain how this paper will present novel (new) or additive information to the existing body of literature that can be of benefit to and/or add to the state of knowledge in the petroleum industry. (25-75 words) GUIDELINES FOR ACCEPTED ABSTRACTS 1. 2. 3. Your abstract could be accepted for either Oral Presentation or Poster Presentation. Authors of abstracts selected for the Conference Programme will be notified by 20 April 2015. Authors whose abstracts are accepted will be required to provide either a full manuscript or an extended abstract for inclusion in the Conference Proceedings as follows: 6. 7. Detailed instructions on the preparation of Manuscripts/Extended Abstracts, slides and posters will be sent to the corresponding author of each accepted paper. IPTC assumes no obligation for expenses by authors for travel, lodging, food, or other incidental expenses. A WORD ABOUT COMMERCIALISM Manuscript: To be approximately 7,000 words in length, including figures, charts and tables. Extended Abstract: To be approximately 4,000 words in length, including figures, charts and tables. 4. Please note that if accepted, your paper may be published, as submitted, in conference information media, including the Conference Proceedings and on the IPTC website and the websites of the IPTC sponsoring societies. 5. In the event that the author of the accepted abstract fails to provide a full manuscript or an extended abstract and the associated forms by the deadline date, 15 September 2015, the IPTC organisers will reproduce the original abstract, as submitted to IPTC, in the Conference Proceedings. IPTC has a stated policy against use of commercial trade names, company names, or language that is commercial in tone in the paper title, text or slides. Use of such terms will result in careful scrutiny by the Programme Committee in evaluating abstracts, and the presence of commercialism in the paper or poster may result in it being withdrawn from the conference programme. COPYRIGHT All authors of papers or posters presented at the conference will be required to complete and submit a copyright release form to IPTC or submit the copyright exemption form where applicable. ABSTRACT SUBMISSION DEADLINE: 28 February 2015 Submit your abstract online at www.iptcnet.org/2015/doha www.iptcnet.org/2015/doha 6–9 December 2015 Qatar National Convention Centre Doha, Qatar If an abstract is selected for the programme, the information submitted on this form will be published in the Conference Preview and Onsite Programme brochures. Please type the following information. In order for the author(s) name(s) to appear in the conference brochures, all contact information must be completed. It is vital that all information requested on this document be provided in full and in the order requested. The IPTC Sponsoring Societies assume no obligation for expenses incurred by authors for travel, lodging, food, or other incidental expenses. Paper Title: Check box to indicate corresponding author. IPTC staff will direct all communications to the Corresponding Author on matters relating to this submission. If there are more than 2 authors, please list on a separate page. All contact information must be provided. Author 1 Member Number: qCorresponding Author qAAPG qEAGE qSEG First Name Last Name: Organisation/Company: Job Title: Mailing Address: Student: City: qSPE qYes qNo State: Zip/Postcode: Country: Telephone: Facsimile: Email: Author 2 Member Number: qCorresponding Author qAAPG qEAGE qSEG First Name Last Name: Organisation/Company: Job Title: Mailing Address: Student: City: qSPE qYes qNo State: Zip/Postcode: Country: Telephone: Facsimile: Email: Required Information 1. Is this material being submitted elsewhere? qYes qNo 2. Has this been previously published or presented? qYes qNo If yes, please indicate place/date: __________________________________________________________________________________________ If AAPG/EAGE/SEG/SPE meeting, indicate meeting and paper number: ________________________________________________________________ 3. Will your company allow you to present and/or publish all the information described in your abstract? qYes qNo 4. Using the list included in this document, please indicate at least one Technical Category (from 1 to 48) that applies to your submission Primary Category _____________________________________________________________________________________________________ Secondary Category ___________________________________________________________________________________________________ 5. This abstract should be considered for: qTechnical Presentation qPoster Presentation qEither Attach maximum 450-word abstract to this form, and include paper title and author name. DEADLINE FOR SUBMISSION: 28 February 2015 6 Submit your abstract online at www.iptcnet.org/2015/doha Alternatively, complete and send this form with your abstract to: International Petroleum Technology Conference, Limited Office 3101/02, Fortune Tower, Jumeirah Lake Towers, PO Box 215959, Dubai, UAE Tel: +971.4.457.5800 | Fax: +971.4.457.3164 | Email: [email protected] www.iptcnet.org/2015/doha IPTC SPONSORING SOCIETIES The International Petroleum Technology Conference (IPTC) is an international oil and gas conference and exhibition. The event is to rotate in various venues in the Eastern Hemisphere. The scope of the conference programme and associated industry activities will address technology and relevant industry issues that challenge industry specialists and management around the world, particularly in the gas business and certain overarching issues such as HSE, security, HR and training. IPTC is a collaborative event between the following societies: Founded in 1917, AAPG is the premiere global organization for petroleum explorationists with over 42,500 members in 129 countries. The original purpose of AAPG, to foster scientific research, to advance the science of geology, to promote technology, and to inspire high professional conduct, still guides the Association today. AAPG provides publications, conferences, and educational opportunities to geoscientists and disseminates the most current geological information available to the general public. EAGE is a professional association for geoscientists and engineers. Founded in 1951, it is an organization with a worldwide membership providing a global network of commercial and academic professionals. The association is truly multi-disciplinary and international in form and pursuits. All members of EAGE are professionally involved in (or studying) geophysics, petroleum exploration, geology, reservoir engineering, mining and civil engineering. EAGE operates two divisions: the Oil & Gas Geoscience Division and the Near Surface Geoscience Division. EAGE organises the following activities for its members: 1. Events (conferences, exhibitions, workshops) 2. Publications (journals, books) 3. Educational Programmes (short courses, lectures) 4. Student Programmes 5. Recruitment SEG is the world’s leading geosciences society with more than 32,000 members in 136 countries across the globe. The Society of Exploration Geophysicists provides its members with the resources and tools they need for a successful professional career, and serves the geosciences community with timely events, helpful information and networking. For more information visit the SEG website at www.seg.org. The Society of Petroleum Engineers (SPE) is a not-for-profit professional association whose members are engaged in energy resources development and production. SPE serves more than 124,000 members in 135 countries worldwide. SPE is a key resource for technical knowledge related to the oil and gas exploration and production industry and provides services through its publications, events, training courses, and online resources at www.spe.org. www.iptcnet.org/2015/doha
© Copyright 2024