1. No category

Origin1500 1.5kW Solar System Panel Specifications
Your Origin system will be supplied with one of the following sets of panels:
Manufacturer
Trina
Trina
Sharp
Mono Or Poly
Size (Watts)
Mono
Poly
Poly
190/195/200
230
215/220
Panels Required To Achieve
Minimum 1500 Watts
8
7
7
Please note all solar panels supplied are CEC accredited and compliant with
IEC/EN61730 and IEC/EN61215 or IEC/EN61646.
The choice of panels will be at the sole discretion of our installer subject to such
matters as stock availability.
Please see the following specification sheet for further details and panel specifications.
Mono
Multi
Solutions
TSM-DC01A
TSM-DA01A
SoluTion
15.6%
MAX effICIenCY
200w
Module can bear snow loads up to 5400Pa and
wind loads up to 2400Pa
MAX POwer OuTPuT
10 YeAr
Guaranteed power output
0~+3%
PrODuCT wArrAnTY
25 YeAr
high performance under low light conditions
Cloudy days, mornings and evenings
lIneAr POwer wArrAnTY
Founded in 1997, Trina Solar (nYSe:
TSl) has established itself as a leader
in the solar community with its
vertically integrated business model.
our modules and system solutions
provide clean solar power in on-grid
and off-grid residential, commercial,
industrial and utility-scale systems.
With more than 22 offices worldwide,
Trina Solar has partnerships with
leading installers, distributors, utilities
and developers in all major PV
markets. Trina Solar is committed to
driving smarter energy choices.
DC/DA01A
DC/DA01A.08
The
Manufactured according to international Quality
and environment Management System Standards
ISO9001, ISO14001
MC4 photovoltaic connectors increase system
reliability
MC4
the original
lIneAr PerfOrMAnCe wArrAnTY
10 Year Product Warranty • 25 Year Linear Power Warranty
100%
Guaranteed Power
Trina Solar limited
www.trinasolar.com
Additio
nal va
lue fro
m
90%
Trina S
o
lar’s li
near w
a
rranty
80%
Years
5
10
Industry standard
15
20
Trina Solar
25
TSM-DC01A / TSM-DA01A The
DIMenSIOnS Of PV MODule TSM-DC/DA01A
764mm
180.5 136
JUNCTION
BOX
NAMEPLATE
6-Ø 4.3 GROUNDING HOLE
12-DRAIN HOLE
A
eleCTrICAl DATA @ STC
TSM-190
DC/DA01A
TSM-195
DC/DA01A
TSM-200
DC/DA01A
Peak Power Watts-PMAX (Wp)
190
195
200
Power output Tolerance-PMAX (%)
0/+3
0/+3
0/+3
Maximum Power Voltage-VMP (V)
36.6
37.1
37.6
Maximum Power Current-i MPP (A)
5.19
5.25
5.32
open Circuit Voltage-VoC (V)
45.1
45.6
46.0
Short Circuit Current-i SC (A)
5.52
5.56
5.60
Module Efficiency ηm (%)
14.9
15.2
15.6
Values at Standard Test Conditions STC (Air Mass AM1.5, irradiance 1000W/m², Cell Temperature 25°C).
Power measurement tolerance: ±3%
948mm
1581mm
G = 900±10mm
4-Ø 9×12
INSTALLING
HOLE
SoluTion
A
628.5mm
eleCTrICAl DATA @ nOCT
TSM-190
DC/DA01A
TSM-195
DC/DA01A
TSM-200
DC/DA01A
Maximum Power-PMAX (Wp)
140
143
147
Maximum Power Voltage-VMP (V)
33.8
34.3
34.8
Maximum Power Current-i MPP (A)
4.14
4.18
4.23
open Circuit Voltage (V)-VoC (V)
41.7
42.2
42.5
Short Circuit Current (A)-i SC (A)
4.44
4.47
4.5
noCT: irradiance at 800W/m², Ambient Temperature 20°C, Wind Speed 1m/s.
Power measurement tolerance: ±3%
Back View
MeChAnICAl DATA
A-A
I-V CurVeS Of PV MODule TSM-195 DC/DA01A
6.
00
Current(A)
5.00
4.00
1000W/m2
1.00
0.00
0.00
Monocrystalline 125 × 125mm (5 inches)
Cell orientation
72 cells (6 × 12)
Module dimensions
1581 × 809 × 35mm (62.24 × 31.85 × 1.37 inches)
Weight
14.9kg (32.8 lb)
Glass
high transparency solar glass 3.2mm (0.13 inches)
Frame
Anodized aluminium alloy
J-Box
iP 65 rated
Cables
Photovoltaic Technology cable 4.0mm² (0.006 inches²),
900mm (35.4 inches)
Connector
original MC4
800W/m2
600W/m2
3.00
2.00
Solar cells
TeMPerATure rATIngS
400W/m2
200W/m2
10.
00
20.
00
30.
00
40.
50.
00
Voltage(V)
00
MAXIMuM rATIngS
nominal operating Cell
Temperature (noCT)
45°C (±2°C)
operational Temperature
-40~+85°C
Temperature Coefficient of PMAX
- 0.40%/°C
Maximum System
Voltage
1000V DC(ieC)/
600V DC(ul)
Temperature Coefficient of VoC
- 0.30%/°C
Max Series Fuse Rating
10A
Temperature Coefficient of I SC
0.023%/°C
Average efficiency reduction of 4.5% at 200W/m 2
according to en 60904-1.
wArrAnTY
10 year Product Workmanship Warranty
25 year linear Power Warranty
CerTIfICATIOn
PACkAgIng COnfIgurATIOn
Recyclable
packaging
Modules per box: 29 pieces
Modules per 40’ container: 812 pieces
CAuTion: ReAD SAFeTY AnD inSTAllATion inSTRuCTionS BeFoRe uSinG The PRoDuCT.
© 2012 Trina Solar Limited. All rights reserved. Specifications included in this datasheet are subject to change
without notice.
TSM_en_nov_2012
(Please refer to product warranty for details)
Mono
Multi
Solutions
TSM-PC05
TSM-PA05
The uniVeRSAl SoluTion
15.0%
MAX effICIenCY
245w
Module can bear snow loads up to 5400Pa and
wind loads up to 2400Pa
MAX POwer OuTPuT
10 YeAr
Guaranteed power output
0~+3%
PrODuCT wArrAnTY
25 YeAr
high performance under low light conditions
Cloudy days, mornings and evenings
lIneAr POwer wArrAnTY
Founded in 1997, Trina Solar is one of the
world’s leading PV companies. Since its
iPo on the nYSe in 2006, Trina Solar has
developed a vertically integrated business
model, with in-house production of ingots,
wafers, cells and solar panels in both
mono and multicrystalline technologies. its
manufacturing capacity for solar panels
will be 2.4GW by the end of 2012, making
it one of the largest solar manufacturers in
the world. Trina Solar’s extensive portfolio
includes panels for all kinds of applicationsresidential, utility, offgrid, BiPV as well as
innovative system solutions.
Manufactured according to international Quality
and environment Management System Standards
ISO9001, ISO14001
Approved original MC4 Photovoltaic connector
used with highest reliability
MC4
the original
With 20 branch offices around the world,
Trina Solar is serving leading installers,
distributors, utilities and developers in all
major PV markets. Trina Solar is committed
to driving down the cost of solar and
making it more affordable for all.
10 Year Product Warranty • 25 Year Linear Power Warranty
100%
Guaranteed Power
Trina Solar limited
www.trinasolar.com
lIneAr PerfOrMAnCe wArrAnTY
Additio
nal va
lue fro
m
90%
Trina S
o
lar’s li
near w
a
rranty
80%
Years
5
10
Industry standard
15
20
Trina Solar
25
TSM-PC05 / TSM-PA05 The uniVeRSAl SoluTion
DIMenSIOnS Of PV MODule TSM-PC/PA05
941mm
180
JUNCTION
BOX
150
NAMEPLATE
990mm
1650mm
G = 1000±10mm
4-Ø 9×12
INSTALLING HOLE
6-Ø 4.3 GROUNDING HOLE
A
A
12-DRAIN HOLE
812mm
eleCTrICAl DATA @ STC
TSM-230 PC/
PA05
TSM-235 PC/
PA05
TSM-240 PC/
PA05
TSM-245 PC/
PA05
Peak Power Watts-PMAX (Wp)
230
235
240
245
Power output Tolerance-PMAX (%)
0/+3
0/+3
0/+3
0/+3
Maximum Power Voltage-VMP (V)
29.2
29.3
29.7
30.2
Maximum Power Current-i MPP (A)
7.90
8.03
8.10
8.13
open Circuit Voltage-VoC (V)
37.1
37.2
37.3
37.5
Short Circuit Current-i SC (A)
8.53
8.55
8.62
8.68
Module Efficiency ηm (%)
14.1
14.4
14.7
15.0
Values at Standard Test Conditions STC (Air Mass AM1.5, irradiance 1000W/m², Cell Temperature 25°C).
Power measurement tolerance: ±3%
eleCTrICAl DATA @ nOCT
TSM-230 PC/
PA05
TSM-235 PC/
PA05
TSM-240 PC/
PA05
TSM-245 PC/
PA05
Maximum Power-PMAX (Wp)
167
171
174
178
Maximum Power Voltage-VMP (V)
26.3
26.4
26.6
26.8
Maximum Power Current-i MPP (A)
6.35
6.48
6.55
6.64
open Circuit Voltage (V)-VoC (V)
33.9
34.0
34.1
34.2
Short Circuit Current (A)-i SC (A)
6.95
6.97
7.04
7.10
noCT: irradiance at 800W/m², Ambient Temperature 20°C, Wind Speed 1m/s.
Power measurement tolerance: ±3%
Back View
MeChAnICAl DATA
A-A
I-V CurVeS Of PV MODule TSM-245 PC/PA05
Current(A)
10.00
1000W/m2
9.00
8.00
800W/m2
7.00
00
6.
600W/m2
5.00
00
4.
400W/m2
3.00
200W/m2
2.00
1.00
0.00
0.00
10.00
Solar cells
Multicrystalline 156 × 156mm (6 inches)
Cell orientation
60 cells (6 × 10)
Module dimensions
1650 × 992 × 40mm (64.95 × 39.05 × 1.57 inches)
Weight
19.5kg (43.0 lb)
Glass
high transparency solar glass 3.2mm (0.13 inches)
Frame
Anodized aluminium alloy
J-Box
iP 65 rated
Cables
Photovoltaic Technology cable 4.0mm² (0.006 inches²),
1000mm (39.4 inches)
Connector
MC4
TeMPerATure rATIngS
20.00
30.00
40.00
Voltage(V)
Average efficiency reduction of 4.5% at 200W/m 2
according to en 60904-1.
MAXIMuM rATIngS
nominal operating Cell
Temperature (noCT)
45°C (±2°C)
operational Temperature
-40~+85°C
Temperature Coefficient of PMAX
- 0.43%/°C
Maximum System
Voltage
1000V DC(ieC)/
600V DC(ul)
Temperature Coefficient of VoC
- 0.32%/°C
Max Series Fuse Rating
15A
Temperature Coefficient of I SC
0.047%/°C
wArrAnTY
10 year workmanship warranty
25 year linear performance warranty
CerTIfICATIOn
PACkAgIng COnfIgurATIOn
Modules per box: 24 pcs
Modules per 40’ container: 672 pcs
Recyclable
packaging
CAuTion: ReAD SAFeTY AnD inSTAllATion inSTRuCTionS BeFoRe uSinG The PRoDuCT.
© 2012 Trina Solar Limited. All rights reserved. Specifications included in this datasheet are subject to change
without notice.
TSM_en_Jun_2012
(Please refer to product warranty for details)
215WATT
BIG POWER,
SMALL FOOTPRINT
FEATURES
• High-power module (215W) using 156.5mm square multi crystal silicon solar cells with 13.1% module conversion efficiency
• Photovoltaic module with bypass diode minimises the power drop caused by shade
• Textured cell surface to reduce the reflection of sunlight and BSF (Back Surface Field) structure to improve cell conversion efficiency: 14.6%
• White tempered glass, EVA resin and
a weatherproof film, plus aluminum frame for extended outdoor use
• Output terminal: Lead wire with waterproof connector
• Certifications: IEC 61215 & IEC 61730
• SHARP modules are manufactured in ISO 9001 certified factories
MULTI CRYSTAL SILICON PHOTOVOLTAIC
MODULE WITH 215W MAXIMUM POWER
This multi crystal 215watt module features 14.6%
encapsulated cell efficiency and 13.1% module
efficiency. Using breakthrough technology perfected
in Sharp’s space cell program, the ND-A215A2
module allows for maximum usable power
per square metre of solar array.
A safe, clean, reliable source of energy, Sharp’s
ND-A215A2 photovoltaic module is designed for
large electrical power requirements. Based on the
technology of crystal silicon solar cells developed
over 50 years, this module has superb durability to
withstand rigorous operating conditions and
is suitable for grid connected systems.
Common applications for the Sharp ND-A215A2
include residences, office buildings, solar power
stations and solar suburbs. As one of the world’s
leading manufacturer of photovoltaic modules,
Sharp produces an extensive line of high power
modules for every electrical power requirement.
ND-A215A2 – MAXIMUM POWER
ELECT RIC AL CHARACT ERIST ICS
MECHANIC AL CHARACT ERIST ICS
Cell
156.5mm Square
Polycrystalline silicon
Dimensions
994 x 1652 x 46mm
No. of Cells and Connections
60 in series
Weight
21.0kg
Open Circuit Voltage (Voc)
36.7V
Maximum Power Voltage (Vpm)
30.2V
Short Circuit Current (Isc)
7.82A
Temp. Coefficient of Pmax
-0.485
% / °C
Maximum Power Current (Ipm)
7.13A
Temp. Coefficient of Voc
-0.13
V / °C
Maximum Power (Pm) 1
Typical 215W
Temp. Coefficient of Isc
0.053
% / °C
Encapsulated Solar Cell Efficiency ( c)
14.6%
Module Efficiency ( m)
13.1%
Maximum System Voltage
DC 1000V
Series Fuse Rating
15A
Type of Output Terminal
Lead Wire with MC3 Connector
Specifications are subject to change without notice
1
(STC) Standard Test Conditions: 25˚C, 1 kW/m2, AM 1.5
TEMPERATURE COEFFICIENT
ABSOLUT E MAXIMUM RAT INGS
Parameters
Rating
Unit
Operating Temperature
-40 to +90
°C
Storage Temperature
-40 to +90
°C
Dielectric Voltage Withstood
3000 max.
V-DC
IV CURVES
DIMENSIONS
B AC K V I E W
Characteristic curves: Current / power against
voltage (cell temperature: 25°C)
11
SIDE VIEW
A
220
1000 [W/m2]
Power (w)
Current (A)
800 [W/m2]
600 [W/m2]
400 [W/m2]
200 [W/m2]
40
Voltage (V)
Current against voltage
Power against voltage
B
Voc
Isc
Short circuit current Isc (A)
Open circuit voltage Voc (V)
Characteristic curves: Open circuit voltage /
short circuit current against irradiance
(cell temperature: 25°C)
A
994 mm
Irradiance (W/m 2)
Specifications are subject to change without notice
B
1652 mm
C
C
46 mm
Specifications are subject to change without notice
In the absence of confirmation by device specifications sheets, Sharp takes no responsibility for any defects that may occur in
equipment using any Sharp devices shown in catalogues, data books, etc. Contact Sharp in order to obtain the latest device
specification sheets before using any Sharp device.
• Design and specifications are subject to change without prior notice.
• Colour variations to products may occur due to printing.
• All information and technical details are correct as at product release date.
Sharp Corporation of Australia Pty Ltd
ABN 40 003 039 405
1 Huntingwood Drive, Huntingwood, NSW 2148
PO Box 6827, Blacktown, NSW 2148
Tel: (02) 9830 4600 Fax: (02) 9672 1208
www.sharp.net.au
© SHARP CORP. PRINTED IN AUSTRALIA
220 WATT
BIG POWER,
SMALL FOOTPRINT
FEATURES
• High-power module (220W) using 156.5mm square multi crystal silicon solar cells with 13.4% module conversion efficiency
• Photovoltaic module with bypass diode minimises the power drop caused by shade
• Textured cell surface to reduce the reflection of sunlight and BSF (Back Surface Field) structure to improve cell conversion efficiency: 15%
• White tempered glass, EVA resin and
a weatherproof film, plus aluminum frame for extended outdoor use
• Output terminal: Lead wire with waterproof connector
• Certifications: IEC 61215 & IEC 61730
• SHARP modules are manufactured in ISO 9001 certified factories
MULTI CRYSTAL SILICON PHOTOVOLTAIC
MODULE WITH 220W MAXIMUM POWER
This multi crystal 220watt module features 15%
encapsulated cell efficiency and 13.4% module
efficiency. Using breakthrough technology perfected
in Sharp’s space cell program, the ND-220E1J module
allows for maximum usable power per square metre
of solar array.
A safe, clean, reliable source of energy, Sharp’s
ND-220E1J photovoltaic module is designed for
large electrical power requirements. Based on the
technology of crystal silicon solar cells developed
over 50 years, this module has superb durability to
withstand rigorous operating conditions and
is suitable for grid connected systems.
Common applications for the Sharp ND-220E1J
include residences, office buildings, solar power
stations and solar suburbs. As one of the world’s
leading manufacturer of photovoltaic modules,
Sharp produces an extensive line of high power
modules for every electrical power requirement.
ND-220E1J – MAXIMUM POWER
ELECT RIC AL CHARACT ERIST ICS
MECHANIC AL CHARACT ERIST ICS
Cell
156.5mm Square
Polycrystalline silicon
Dimensions
994 x 1652 x 46mm
No. of Cells and Connections
60 in series
Weight
21.0kg
Open Circuit Voltage (Voc)
36.5V
Maximum Power Voltage (Vpm)
29.2V
Short Circuit Current (Isc)
8.20A
Temp. Coefficient of Pmax
-0.485
% / °C
Maximum Power Current (Ipm)
7.54A
Temp. Coefficient of Voc
-0.13
V / °C
Maximum Power (Pm) 1
Typical 220W
Temp. Coefficient of Isc
0.053
% / °C
Encapsulated Solar Cell Efficiency ( c)
15%
Module Efficiency ( m)
13.4%
Maximum System Voltage
DC 1000V
Series Fuse Rating
15A
Type of Output Terminal
Lead Wire with MC3 Connector
TEMPERATURE COEFFICIENT
ABSOLUT E MAXIMUM RAT INGS
Specifications are subject to change without notice
1
(STC) Standard Test Conditions: 25˚C, 1 kW/m2, AM 1.5
Parameters
Rating
Unit
Operating Temperature
-40 to +90
°C
Storage Temperature
-40 to +90
°C
Dielectric Voltage Withstood
3000 max.
V-DC
IV CURVES
DIMENSIONS
Characteristic curves: Current / power against
voltage (cell temperature: 25°C)
B AC K V I E W
SIDE VIEW
A
220
12
11
1000 [W/m2]
Power (w)
Current (A)
800 [W/m2]
600 [W/m2]
400 [W/m2]
200 [W/m2]
40
Voltage (V)
Current against voltage
Power against voltage
B
Voc
Isc
Short circuit current Isc (A)
Open circuit voltage Voc (V)
Characteristic curves: Open circuit voltage /
short circuit current against irradiance
(cell temperature: 25°C)
A
994 mm
Irradiance (W/m 2)
Specifications are subject to change without notice
B
1652 mm
C
C
46 mm
Specifications are subject to change without notice
In the absence of confirmation by device specifications sheets, Sharp takes no responsibility for any defects that may occur in
equipment using any Sharp devices shown in catalogues, data books, etc. Contact Sharp in order to obtain the latest device
specification sheets before using any Sharp device.
• Design and specifications are subject to change without prior notice.
• Colour variations to products may occur due to printing.
• All information and technical details are correct as at product release date.
Sharp Corporation of Australia Pty Ltd
ABN 40 003 039 405
1 Huntingwood Drive, Huntingwood, NSW 2148
PO Box 6827, Blacktown, NSW 2148
Tel: (02) 9830 4600 Fax: (02) 9672 1208
www.sharp.net.au
© SHARP CORP. PRINTED IN AUSTRALIA