1. law, govt and politics
2. government
3. state and local government

ADVERTISEMENT No.: 13/06/2013-Per/HRD
GOVERNMENT OF INDIA
MINISTRY OF DEFENCE
ORDNANCE FACTORY BOARD
10-A, S.K. BOSE ROAD
KOLKATA – 700 001
INDUCTION OF TRADE APPRENTICES FOR TRAINING UNDER THE APPRENTICES ACT’
1961 AND DISABILITIES ACT’1995 IN ORDNANCE FACTORIES
‘On-line’ Application is invited from Indian citizens for Trade Apprenticeship training in
Ordnance & Ordnance Equipment Factories for 54th batch. Particulars of training and induction
process are given below:1. Date of on-line registration of Application
2. Last Date of on-line Registration of Application
3. Last Date of receipt of Hard Copy of Application
at respective Ordnance Factory
:
:
03/02/2015
28/02/2015
:
07/03/2015
For candidates residing at Assam, Meghalaya, Arunachal Pradesh, Mizorzm, Manipur,
Nagaland, Tripura, Sikkim, Jammu & Kashmir, Lahul & Spiti District and Pangi sub division of
Chamba district of Himachal Pradesh, Andaman & Nikobar islands, Lakshadweep and
candidates residing abroad, last date of on-line registration of application and last date of
submission of hard copy to the respective Ordnance Factories will be one week extra.
4 AGE: Between 14 to 22 years - As on 01-01-2014
Relaxation in Upper age limit is permitted as under :
(a) For SC/ST Candidates – 05 (Five) years.
(b) For OBC candidates - 03 (Three) years
(c) For Physically Handicapped (PH) / Physically Challenged (PC) Candidates- 10(Ten) years.
(d) For ITI Candidates – upper age limit will be relaxable by the period of training already
undergone as per the normal duration of NCVT/SCVT, in the relevant
trade.
5. ESSENTIAL QUALIFICATION:
a. For non-ITI applicants: - Passed “Madhyamik” (Class: X standard or equivalent), with
minimum 40% marks in Aggregate and with 40% marks in Mathematics and Science each.
b. For ITI applicants: - Should have passed trade test from any institute recognized by
NCVT or SCVT or any other authority specified through Gazette Notification of Ministry of
Labour & Employment, with duration as per the Apprentice Act, 1961.
-- contd. to Page:2
-Page:26. ADDRESS FOR APPLICATION : Application is to be addressed to the Senior General
Manager/ General Manager of any of the following Ordnance Factories named in the table,
where the applicant intends to appear in the competitive induction Examination and to
undergo the Trade Apprenticeship training
VACANCIES IN THE TRADES FOR EX-ITI CANDIDATES AVAILABLE IN
RESPECTIVE FACTORIES ARE ALSO MENTIONED IN THE TABLE. HOWEVER,
VACANCIES IN THE TRADES FOR NON-ITI CANDIDATES WILL BE ALLOTED ON
THE BASIS OF MERIT POSITION OF THE CANDIDATES, DRAWN THROUGH THE
WRITTEN EXAMINATION Vis-à-vis VACANCIES IN VARIOUS TRADES AVAILABLE
IN THE RESPECTIVE FACTORY:
Sl.No.
1
2
NAME AND ADDRESS OF
FACTORIES
The General Manager
Ordnance Cable Factory
CHANDIGARH – 160 002
CHANDIGARH
The Senior General Manager
Gun Carriage Factory
JABALPUR – 482 001
MADHYA PRADESH
3
The General Manager
Ordnance Factory KHAMARIA
JABALPUR – 482 005
MADHYA PRADESH
4
CHANDIGARH
For Non-ITI - *
For ex- ITI :
CARPENTER, ELECTRICIAN, FITTER, MACHINIST, PAINTER
GENERAL, TURNER, WELDER
MADHYA PRADESH
For Non-ITI - *
For ex-ITI
:
CNC PROGRAMER CUM OPERATOR,
ELECTRICIAN,
MECHANIC
MAINTENANCE,
MACHINE
TOOL
PROGRAMMING
&
SYSTEM
ADMINISTRATION
ASSISTANT, WELDER(G&E )
For Non-ITI - *
For ex- ITI :
ELECTRICIAN, ELECTROPLATER, FITTER, MACHINIST,
MACHINIST GRINDER, MECHANIC MACHINE TOOL
MAINTENANCE, TURNER , WELDER
For Non-ITI - *
The General Manager
Vehicle Factory JABALPUR
Pin – 482 009
MADHYA PRADESH
5
6
TRADES AVAILABLE
The General Manager
Grey Iron Foundry
JABALPUR -482 009
MADHYA PRADESH
The General Manager
Ordnance Factory ITARSI
Pin – 461 122
MADHYA PRADESH
For ex- ITI :
ELECTRICIAN, MACHINIST, PAINTER GENERAL, TURNER,
WELDER,
For Non-ITI - NIL
For ex-ITI :
ELECTRICIAN, FITTER , FOUNDRYMAN , MACHINIST,
MECHANIC MACHINE TOOL MAINTENANCE , WELDER ,
For Non-ITI - *
For ex- ITI :
CARPENTER, ELECTRICIAN, FITTER, MACHINIST,
MECHANIC AUTOMOBILE, MECHANIC MOTOR
VEHICALE, PAINTER GENERAL , TURNER, WELDER
(G&E)
-- contd. to Page:3
-Page:37
The General Manager
Ordnance Factory KATNI
Pin -483 503
MADHYA PRADESH
8
9
The Senior General Manager
Ammunition Factory Kirkee
KHADKI – 411 003 (PUNE)
MAHARASHTRA
The General Manager
High Explosives Factory , Kirkee
KHADKI -411 003
MAHARASHTRA
10
The General Manager
Ordnance Factory Dehu Road
Pune – 412 113
MAHARASHTRA
11
The General Manager
Machine Tool Prototype Factory
AMBARNATH – 421 502
MAHARASHTRA
12
The General Manager
Ordnance Factory
AMBARNATH
Pin-421 502
MAHARASHTRA
13
For Non-ITI - *
For ex- ITI :
ELECTRICIAN, ELECTRONIC MECHANIC, INSTRUMENT
MECHANIC, MECHANIC MACHINE TOOL MAINTENANCE ,
REFREGERATOR & AC MECHANIC , TOOL & DIE
MAKER
MAHARASHTRA
For Non-ITI - *
For ex-ITI :
ATTENDENT OPERATOR (CHEMICAL PLANT),
ELECTRICIAN , FITTER, MACHINIST,
TURNER,
WELDER (G&E).
For Non -ITI *
For ex-ITI :
ELECTRICIAN , ELECTRONICS MECHANIC,
FITTER
For Non -ITI - *
For ex-ITI :
ATTENDENT OPERATOR (CHEMICAL PLANT), , BOILER
ATTENDANT, CARPENTER, ELECTRICIAN , FITTER,
MACHINIST, MACHINIST (GRINDER), MASSON (BUILDING
CONSTRUCTION), MECHANIC MAINTENANACE
(CHEMICAL PLANT), PAINTER (G), PLUMBER,
REFREGERATOR & AC MECHANIC , SHEET METAL
WORKER, TURNER, WELDER (G&E),
For Non –ITI : - *
For ex-ITI :
ELECTRICIAN, FITTER , MACHINIST , MACHINIST
GRINDER , MECHANIC MACHINE TOOL
MAINTENANCE, TURNER , WELDER (G&E )
For Non –ITI :- *
For ex-ITI :
ELECTRICIAN, ELECTRONICS MECHANIC, FITTER,
FOUNDRYMAN, MACHINIST, MECHANIC MACHINE TOOL
MAINTENANCE, TURNER, WELDER (G&E) ,
For Non-ITI
The General Manager
Ordnance Factory BHANDARA
Pin – 441 906
MAHARASHTRA
-
*
For ex- ITI :
ATTENDANT OPERATOR ( CHEMICAL PLANT), BOILER
ATTENDANT, CARPENTAR, ELETRICIAN, FITTER,
INSTRUMENT MECHANIC, PIPE FITTER,
REFRIGERATOR A.C. MECHANIC, STEEL METAL
WORKER, TURNER, WELDER (G&E)
-- contd. to Page:4
-Page:414
The General Manager
Ordnance Factory
VARANGOAN
Pin- 425 308
MAHARASHTRA
15
The General Manager
Ordnance Factory
BHUSAWAL,
Pin – 425 203
MAHARASHTRA
The Senior General Manager
Ordnance Factory CHANDA
Pin – 442 501
MAHARASHTRA
16
17
The General Manager
Ordnance Factory AMBAJHARI
Pin – 440 021
NAGPUR
18
For ex-ITI :
ELECTRICIAN, FITTER, MACHINIST, SHEET METAL
WORKER, PAINTER (G), TURNER,WELDER(G&E) ,
For Non-ITI : *
For ex-ITI :
BOILER ATTENDANT, ELECTRICIAN, FITTER,
MACHINIST, TURNER
For Non –ITI - *
For ex-ITI :
ELECTRICIAN, ELECTRONIC MECHANIC, FITTER,
MACHINIST, MECHANIC MACHINE TOOL
MAINTENANCE, TURNER, WELDER (G&E),
ORISSA
For Non-ITI -
The General Manager
Ordnance Factory Badmal
Badmal – 767770, ORISSA
19
The General Manager
Heavy Vehicles Factory
AVADI – 600 054
TAMIL NADU
20
The General Manager
Engine Factory
AVADI – 600 054
TAMIL NADU
21
The General Manager
Ordnance Clothing Factory
AVADI – 600 054
TAMIL NADU
22
For Non-ITI - *
For ex-ITI :
ELECTRICIAN, FITTER, MACHINIST , MACHINIST
GRINDER , MACHINE TOOL MAINTENANCE
MECHANIC (MILLWRIGHT MAINTENANCE) , TURNER
,
For Non –ITI - *
The General Manager
Cordite Factory
Aruvankadu
Pin – 643 202
TAMIL NADU
*
For ex-ITI :
BOILER ATTENDANT, ELECTRICIAN , INSTRUMENT
MECHANIC, MACHINIST
TAMIL NADU
For Non-ITI - *
For ex- ITI :
ELECTRICIAN, ELECTRONIC MECHANIC, FITTER,
MACHINIST,
PROGRAMMING
&
SYSTEM
ADMINISTRATION
ASSISTANT,
TURNER,
WELDER(G&E )
For Non ITI - *
For ex-ITI :
ELECTRICIAN, ELECTRONIC MECHANIC,
ELECTROPLATER, FITTER , MACHINIST, ,
MECHANIC MACHINE TOOL MAINTENANCE , TURNER
For Non-ITI - *
For ex-ITI :
PROGRAMMING
&
SYSTEM
ADMINISTRATION
ASSISTANT, SEWING MACHINE MECHANIC, TAILOR
(MEN)
For Non-ITI - *
For ex-ITI :
ELECTRICIAN , FITTER, INSTRUMENT MECHANIC ,
MACHINIST, PROGRAMMING & SYSTEM ADMINISTRATIVE
ASSISTANT(PASSA), TURNER
-- contd. to Page:5
-Page:523
The General Manager
Heavy Alloy Penetrator
Project
TIRUCHIRAPALLI
TAMIL NADU – 620 025
24
The General Manager
Ordnance Factory
Tiruchirapally
Pin – 620 016
TAMIL NADU
For Non-ITI - Nil
For ex-ITI :
ELECTRICIAN, FITTER, MACHINIST, PROGRAMMING &
SYSTEM
ADMINISTRATION
ASSISTANT,
REFREGERATOR & AC MECHANIC,
TURNER,
WELDER(G&E )
For Non-ITI - *
For ex-ITI :
ELECTRICIAN, ELECTRONIC MECHANIC,
ELECTROPLATER, FITTER, MACHINIST, MACHINIST
GRINDER , MECHANIC MACHINE TOOL
MAINTENANCE , MECHANIC MOTOR VEHICLE ,
PROGRAMMING & SYSTEM ADMINISTRATION
ASSISTANT, REFREGERATOR & AC MECHANIC ,
TURNER , WELDER(G&E )
TELANGANA
25
The General Manager
Ordnance Factory Project Medak
( Yeddumailaram )
Pin– 502 205
TELANGANA
For Non-ITI
-
NIL
For ex- ITI :
ELECTRICIAN, ELECRONIC MECHANIC, FITTER,
FOUNDRYMAN, MACHINIST,
PROGRAMMING &
SYSTEM ADMINISTRATION ASSISTANT (PASSA), TURNER,
WELDER
UTTAR PRADESH
26
For Non-ITI - *
The General Manager
Ordnance Factory KANPUR
Pin – 208 009
UTTAR PRADESH
27
For Non-ITI - *
The General Manager
Small Arms Factory
KANPUR – 208 009
UTTAR PRADESH
28
29
For ex- ITI :
ELECTRICIAN, ELECTRONIC MECHANIC, FITTER ,
INSTRUMENT MECHANIC, MACHINIST, MACHINIST
GRINDER, MECHANIC MACHINE TOOL MAINTENANCE,
TURNER , WELDER(G&E )
The General Manager
Ordnance Parachute Factory
KANPUR – 208 004
UTTAR PRADESH
The Senior General Manager
Ordnance Equipment Factory
KANPUR – 208 001
UTTAR PRADESH
For ex-ITI :
ELECTRICIAN, FITTER , GRINDER, IT & ELECTRONIC
SYSTEM MAINTENANCE, MACHINIST, MECHANIC
MACHINE TOOL MAINTENANCE, TURNER, WELDER
For Non-ITI - *
For ex-ITI :
ELECTRICIAN, FITTER, PROGRAMMING & SYSTEM
ADMINISTRATIVE ASSISTANT(PASSA), TAILOR
For Non-ITI - *
For ex-ITI :
ELECTRICIAN, FITTER, MACHINIST, TAILOR ( MEN)
-- contd. to Page:6
-Page:630
The General Manager
Field Gun Factory
KANPUR – 208 009
UTTAR PRADESH
31
32
33
The General Manager
Ordnance Factory MURADNAGAR
Pin – 201 206
UTTAR PRADESH
The General Manager
Ordnance Clothing Factory
SHAHJAHANPUR -242 001
UTTAR PRADESH
The General Manager
Ordnance Equipment Factory
HAZARATPUR – 283 103
UTTAR PRADESH
For Non-ITI - *
For ex-ITI :
ELECTRICIAN, FITTER, FORGER & HEAT TREATER,
GRINDER, MACHINIST, MECHANIC MACHINE TOOL
MAINTENANCE, TURNER, WELDER (G&E)
For Non-ITI : Nil
For ex-ITI :
ELECTRICIAN, ELECTRONIC MECHANIC, FITTER,
MACHINIST, TURNER, WELDER
For Non-ITI - *
For ex-ITI :
SHIRT AND TROUSER MAKER, TAILOR (MAN)
For Non-ITI - *
For ex- ITI :
ELECTRICIAN, FITTER, MACHINIST, TAILOR (MAN)
UTTARAKHAND
34
For Non-ITI - *
The General Manager
Opto Electronic Factory
DEHRA DUN – 248 008
UTTARAKHAND
35
The General Manager
Ordnance Factory DEHRADUN
Pin- 248 008
UTTARAKHAND
For ex-ITI :
ELECTRICIAN, ELECTROPLATER, FITTER, TURNER
For Non-ITI - *
For ex-ITI :
ELECTRICIAN, FITTER, MACHINISHT, TURNER
WEST BENGAL
36
The General Manager
Rifle Factory Ishapore
Pin – 743 144
WEST BENGAL
37
The Senior General Manager
Metal & Steel Factory
ISHAPORE – 743 144
WEST BENGAL
38
The General Manager
Ordnance Factory
DUM DUM
Pin-700 028
For Non-ITI - NIL
For ex-ITI :
ELECTRICIAN, ELECTRONIC MECHANIC, FITTER,
MACHINIST, MACHINIST GRINDER, MECHANIC MACHINE
TOOL MAINTENANCE, PROGRAMMING & SYSTEM
ADMINISTRATIVE ASSISTANT(PASSA), TURNER, WELDER
(G&E),
For Non-ITI - NIL
For ex- ITI :
ELECTRICIAN, FITTER , FORGER & HEAT TREATER,
FOUNDRY MAN, MACHINIST , MECHANIC MACHINE TOOL
MAINTENANCE, TURNER, WELDER
For non-ITI - NIL
For ex- ITI :
ELECTRONIC MECHANIC, FITTER, MACHINIST, MECHANIC
MACHINE TOOL MAINTENANCE, PROGRAMME & SYSTEM
ADMINISTRATION ASSISTANT, TURNER, WELDER
WEST BENGAL
-- contd. to Page:7
-Page:739
For Non-ITI - *
The Senior General Manager
Gun & Shell Factory,
COSSIPORE -700 002
WEST BENGAL
For ex-ITI :
ELECTRICIAN, FITER , MACHINIST, MACHINIST GRINDER,
TURNER, WELDER
* FOR NON-ITI: VACANCIES IN VARIOUS TRADES AVAILABLE IN THE RESPECTIVE
FACTORY.
4. HOW TO APPLY:
·
5.
Candidate
must
apply
‘online’
directly
through
the
website
link(URL):
www.examfeedback.net/ofb/ofb.aspx.
· While filling up the application form through website , the applicant must be ready with the
following –
a. Scanned copy of his/her recent passport size colored photograph, and
b. Scanned copy of his/her signature
· Candidates may also follow the detail instruction, which is available on the web-site while
filling up the application form.
· The hard copy of the application form must be sent to the respective Ordnance Factory, in a
closed envelop superscribed with “APPLICATION FOR TRADE APPRENTISHIP ” where the
candidate intends to apply along with the self attested copies of following documents –
a. Educational qualification
b. SC/ST/OBC/PH (PC) certificates. Candidates claiming OBC status should note that
certificate on Creamy Layer should have been obtained within 03 years before the closing
date.
c. Document of Age proof
d. Indian Postal Order of Rs. 30/- (non-refundable), in favor of Sr.GM/GM of the Ordnance
Factory where the candidate has applied. Candidate should write in ink the serial no. of
his/her acknowledge form at the back of IPO.
· Candidates belonging to SC/ST or PH(PC) category are exempted from submitting IPO.
· Girl applicants are exempted from submission of IPO.
· Indian Postal Order must have been issued after the date of publication of this advertisement
and should not be later than the last date of submission of the application form.
· Candidates should note that Ordnance Factories will in no case be responsible for the non
receipt of their hard copy application or any delay in its receipt on any account whatsoever.
Hard Copy of applications received after the prescribed closing date will not be
entertained under any circumstances and all such applications received after closing
date will be summarily rejected.
· Copies of educational qualification, Age proof, SC/ST/PH (PC) certificates & Photograph of
the candidate must be self attested. However, the candidate will be personally liable in civil
and criminal way’s if any fraud or bogus fact is revealed afterwards.
ISSUANCE OF ADMIT CARD :
· On receipt of the filled up hard copy of the application form and after scrutinizing, Admit Card
for all the accepted applications will be uploaded on the website where application form has
been submitted. Applicants whose application form are found correct in all respect, will be able
to ‘down load’ their respective Admit Card by feeding the unique sl. no. as given in the
‘acknowledgement’. Ordnance Factory Board shall take no responsibility in case of failure to
download admit card by any candidate.
--- contd. to Page:8
-Page:8· It may be noted that any application found not-complying with the pre-requisites will be
summarily rejected and no correspondence with any person or organization will be made in
that regard. In the above case, the IPO of Rs.30/- as submitted by the applicant will not be
returned. Ordnance Factories reserve the right to accept/reject any application thus submitted.
IT IS TO BE NOTED THAT MERE SUBMISSION OF APPLICATION FORM, RECEIPT OF
‘ACKNOWLEDGEMENT’, RECEIPT OF ADMIT CARD AND APPEARANCE IN EXAMINATION DOES
NOT GUARANTEE INDUCTION AS TRADE APPRENTICESHIP IN ANY OF THE ORDNANCE
FACTORIES. SELECTION OF CANDIDATES WILL BE MADE BASED ON FACTORY-WISE MERIT
POSITION, AVAILABLE VACANCY, SCRUTINY OF ORIGINAL COPY OF CREDENTIALS, CLEAR
POLICE VERIFICATION REPORT & MEDICAL TEST.
6.
EXAMINATION:
The Examination will be as follows:
·
For Non-ITI Candidates: Written Test (One Paper of 03 hours duration) consisting of
questions on – English, General Knowledge, Mathematics and Aptitude/Reasoning, as
per Madhyamik( Class: X Standard or equivalent)
·
For ITI Candidates: Written Test (one paper consisting of 02 parts of 03 hours duration)
PART – A: Questions on English, General Knowledge, Mathematics and
Aptitude/Reasoning - approx. 40% out of total number of questions.
PART – B: Questions on the group of subject trades – approx. 60% out of total number
of questions.
·
·
·
Examination will be conducted on ‘Multiple Choice Objective Type Test’ on OMR sheet.
Candidate will be allowed to write the examination in any one of the following languages:
Bengali/ English / Hindi / Marathi / Oriya/ Tamil / Telugu.
Candidates will be permitted to enter examination hall with ADMIT CARD only.`
7.
MERIT LIST: Merit list for all candidates will be published on the website where the
application form has been submitted. In the event of tie in total marks obtained by the
candidates, following criterion will be followed to decide position:
a. For Non-ITI Candidates : by age seniority.
b. For ITI Candidates : i. Higher marks in Part-B
ii. Age seniority.
8.
RESERVATION FOR SC/ST/OBC & PH (PC) CANDIDATES:
As per the relevant schedule in the Rules under the Apprentice Act, 1961 and the Disability
Act, 1995 and existing Govt. Rules. Final selection of the candidates will be made in order of
merit in each category, separately.
9.
DURATION OF TRAINING:
· For Non-ITI & ITI Candidates: Duration of Training period will be as specified in the
Apprentices Act, 1961. However, for ex-ITI candidates, training period will be reduced by the
normal duration of Trade-wise training period the candidate has undergone training at ITI in the
respective trade.
--- contd. to Page:9
-Page:910. STANDARD OF PHYSICAL FITNESS:
· As per the Schedule II of the Apprentices Act, 1961 and the Disabilities Act, 1995.
11.
STIPEND: - According to the Trade Apprentice Act 1961 & as per The Gazette
notification of India, G.S.R. 680(A), Part-II-Section 37-Sub-section(i) Dtd. September 22, 2014
year wise entitlement of present stipend is appended below. (Time to time amendments via
Gazette notification also will regulate the stipend ).
During the 1st year of training:
70% of minimum wages of Semi-Skilled
workers notified by the respective State or Union Territory.
During the 2nd year of training:
80% of minimum wages of Semi-Skilled
workers notified by the respective State or Union Territory.
During the 3rd year of training: 90% of minimum wages of Semi-Skilled
workers notified by the respective State or Union Territory.
No other allowances will be paid during the entire period of Apprenticeship training. However,
in case of Ex-ITI candidates, period of training already undergone by them will be considered
for the purpose of determining the stipend
12. MEDICAL EXAMINATION: Will be conducted by the respective Ordnance Factory (for the
selected candidates only).
Date, Time and Venue of Medical Examination will be
communicated separately by the concerned Factory.
13. TERMS & CONDITIONS:
The selected candidates will
have to execute a Contract (if minor, by his/her
guardian). The Apprentices will not be provided with quarters/hostel accommodation by the
Ordnance Factories.
During the training, the Apprentices are entitled for FREE
MEDICAL treatment from respective Ordnance Factory Hospital only.
14. OFFER & ACCEPTANCE OF EMPLOYMENT:
It shall not be obligatory on the part of the Employer to offer any employment to any
Apprentice after completion of training, nor shall it be obligatory for the Apprentices
to
accept any
employment, if
offered by the Employer. The candidates are
advised to get
themselves familiarized with the Rules and Regulation under
the Apprentice Act, 1961 and the Disabilities Act, 1995.
15. GENERAL INFORMATION :
Applicants are advised to note the following instructions carefully:
o He/She Must not attempt impersonation or take help of any impersonator at any stage of
the selection process.
o Any material suppression of facts or submitting forge certificates shall lead to rejection of
his/her candidature.
o Any candidate found using any type of unfair means in the examination will be debarred
summarily.
--- contd. to Page:10
-Page:10o Decision of Ordnance Factories in all matters relating to the eligibility, acceptance/rejection
of any application , allotment of examination centre etc. will be final and binding on the
candidates and no inquiry/correspondence will be entertained in this regard.
o Any subsequent changes in the terms and conditions of the examination notice as per the
extant rules will stand good. Ordnance Factory Board reserves the right to consider /
incorporate any subsequent changes/modifications / additions in the terms & conditions
under this examination notice as necessitated and applicable.
o Any dispute in regard to this examination will be subject to courts/tribunals having
jurisdiction over the City/Town in which the concerned Ordnance Factory is situated and
where the candidate has submitted his/her application
Note: Candidates are requested to note/copy the URL for online submission of application and
directly go to the website. The URL is www.examfeedback.net/ofb/ofb.aspx.