1. No category

2400 lumens
Multi-Control Protocol
LTM 030 LTM 060
LED Linear Tuning Module
LTM 030
LTM 060
Description
araya® Linear Tuning Modules mix five color strings of LEDs to deliver tunable and dimmable white light at 90+ CRI and color consistency of <2
step MacAdam ellipse across a tuning range of 2700 - 6000K. Delivered light can be dimmed from 100 - 1% in increments of 1% at constant CCT.
Gradients of saturated colors from 1 - 100% can be added to color points within the tuning range. araya® modules integrate the driver electronics
for precise control of current and PWM inputs and LED light output while tuning and dimming. On board closed loop thermal feedback compensates
each color channel for thermally induced variations in optical output due to tuning, dimming or ambient temperatures. On board closed loop optical
feedback measures the lumen depreciation of each channel and re-balances the color model to ensure color consistency over the 50,000 hour life
of the module. An in-line manufacturing process captures the spectral characteristics of each LED under multiple conditions, generating a unique
color model for each color tuning module. araya® Color Tuning Modules are compatible with traditional 0 - 10V wired controls, and digital protocols
including Lutron® Ecosystem®, DALI, DMX and Bluetooth using the optional Lumenetix Digital Control Adapter. For simple deployment, SceneSet®
allows up to five scenes to be pre-programmed into the module during production and recalled at the venue using a 0 - 10V controller. Commissioning
of the module and the re-programming of Sceneset® is done via the wireless Lumenetix Light Commissioning Tool that connects to the embedded radio.
The LTM Zero features a tuning range of 2700 - 6000K, light emitting surfaces of 12 x 304 mm and 12 x 608 mm, input voltage of
24V DC, fixture mounting features and provisions for reflector mounting.
Key Features
• Tunable range: 2700 - 6000K
• Dimmable from 100 - 1% at constant CCT
• Color gamut control: gradients of saturated colors from
1 - 100% can be added to color points
• Lutron® Ecosystem®, DALI, DMX and Bluetooth compatibility
with optional Digital Control Adapter
• Copy and Paste for exact fixture to fixture matching
• SceneSet® enables up to five scenes to be preprogrammed into each
module and recalled using a 0 - 10V controller
• Integrated driver electronics
• On board thermal and optical feedback for color
• Commissioning via wireless Light Commissioning Tool that connects
to the embedded radio
consistency over 50,000 hour life
• 24V DC input voltage
• Two light emitting surfaces: 12 x 304 mm and 12 x 608 mm
• Features for fixture mounting
• Provisions for reflector mounting
• On board thermal turndown
• In-line spectral capture creates unique color model
for each module
• Compatible with 0 - 10V wired controls
Photometric Specifications
Typical Peak Lumens*
Tuning Range
LTM 030 (20W)
LTM 060 (40W)
2700 - 6000K
1200
2400
CRI (Ra) Across Tuning Range
>90
Dimming
100% to 1% in increments of 1%
Nominal Color Consistency
<2 step MacAdam ellipse (±0.002 Duv from ANSI curve)
Color Consistency Over Life
Calibration maintains original color points over life
Lumen Maintenance
L70 (70% of initial lumens) at 50,000 hours
* Lumen and wattage range is within +/- 10% of the nominal value. Peak efficacy is not necessarily at typical peak lumens.
Lumenetix Inc.
•
4742 Scotts Valley Dr.
•
Scotts Valley, CA 95066
Light Commissioning Tool
877.805.7284
Lumenetix, araya, Dynamic Dimming and SceneSet are registered trademarks of Lumenetix, Inc. © Lumenetix, Inc. 2014.
Revised 2.12.15 | Specifications subject to change without notice
•
www.lumenetix.com
•
[email protected]
UL Recognized Component Dry or Damp Locations ULRRecognized
UL ecognized Component
Component Dry or
Damp
Class 2 Input
Dry or DLocations
amp Locations Class 2 Input Class 2 Designed in California, USA
Designed in California, Assembled
in USA USA Assembled in USA Input 2400 lumens
Multi-Control Protocol
LTM 030 LTM 060
LED Linear Tuning Module
Electrical Specifications
Input Voltage
24V DC
Nominal Power Input
LTM 060
40W
LTM 030
20W
Nominal Current Input
20W: 0.83A; 40W: 1.66A
Power Supply Classification
Class 2
LTM 060
Molex 874381543 (requires Molex 874391500)
Power and Control Connector
Polar Candela Diagram – Side View
Wired dimming and CCT Control
0 – 10V, Lutron® Ecosystem®, DALI, DMX, Bluetooth
CCT and Dimming Control Connections
Plug-in connector for 24 gauge leads
1
1. Lutron Ecosystem , DALI, DMX and Bluetooth require optional Digital Control Adapter.
®
®
Mechanical Specifications
Dimensions H x W x L
H: 1.7” (42 mm) W: 1.2” (30 mm)
L: 11.96” (304 mm) or 23.93” (608 mm)
Weight per linear foot
0.9 pounds (0.41 kg)
Light Emitting Surface Width
0.46” (11.7 mm)
TOP VIEW
(30.20)
1.2
Light surface up
Polar Candela Diagram – End View
(303.91)
11.965
(11.70)
.46
Tc 2”
Case temperature measuring point
.85"
(42.13)
1.7
Maximum Candela = 488.47 Located At
Horizontal Angle = 80,
Vertical Angle = 17.5
END VIEW
SIDE VIEW
LTM 030
Light emitting surface shown in yellow.
Upper dimensions are in millimeters; lower dimensions are in inches.
Blue - Vertical Plane Through Horizontal
Angles (80 - 260) (Through Max. Cd.)
Tc MAX = 75˚C
Red - Horizontal Cone Through Vertical
Angle (17.5) (Through Max. Cd.)
TOP VIEW
(30.20)
1.2
Light surface up
(608)
23.93
Tc
(11.70)
.46
Tc
Case temperature measuring point (from either end)
.85"
(42.13)
1.7
.85"
END VIEW
SIDE VIEW
2"
2"
LTM 060
Light emitting surface shown in yellow.
Upper dimensions are in millimeters; lower dimensions are in inches.
Lumenetix Inc.
•
4742 Scotts Valley Dr.
•
Scotts Valley, CA 95066
877.805.7284
Lumenetix, araya, Dynamic Dimming and SceneSet are registered trademarks of Lumenetix, Inc. © Lumenetix, Inc. 2014.
Revised 2.12.15 | Specifications subject to change without notice
•
www.lumenetix.com
•
[email protected]
UL Recognized Component Dry or Damp Locations ULRRecognized
UL ecognized Component
Component Dry or
Damp
Class 2 Input
Dry or DLocations
amp Locations Class 2 Input Class 2 Designed in California, USA
Designed in California, Assembled
in USA USA Assembled in USA Input