E0602 Pumps • Switches • Solenoids Fuel Pumps High Pressure Flow Switches Oil Burner Pumps from Suntec. Suitable for use with kerosene, No. 1 or No. 2 Fuel Oil. (Waste Oil Pumps also available). Pumps are designed to be gravity fed fuel oil from your holding tank and to then pressurize the fuel to a nozzle. Single-stage pumps are for medium lift applications and can be mounted in any position. Two-stage pumps are for high lift, long run applications and can be mounted in any position except upside-down. All pumps are factory set at 100 PSI but are adjustable from 100-150 PSI. D 4’ Cord ST5 Flow Switch (Medium Flow). Rated from 1 to 8 GPM. Vertical mount only. Rated to 4400 PSI. Brass/plastic construction. Maximum temperature is 176° F. 3/8” FPT ports. 250 Volt, 3 Amp. 47” Cord. ST5H Flow Switch (High Flow). Rated from 1 to 16 GPM. Mounts in any position. Rated to 3100 PSI. Brass/plastic construction. Maximum temperature is 176° F. 3/8” FPT ports. 250 Volt, 3 Amp. 47” Cord. D ST505 Flow Switch (Medium Flow - High Pressure). Rated from 1 to 8 GPM. Vertical mount only. Rated to 7300 PSI. Stainless/ plastic construction. Maximum ST6 temperature is 176° F. 3/8” FPT ports. 250 Volt, 3 Amp. 47” Cord. D No. A2VA-7116 Available in 1725 RPM or 3450 RPM models. * Shaft rotation and nozzle port location is either RH or LH as viewed from the shaft end. ST6 Flow Switch (Medium Flow). Rated from 1 to 8 GPM. Mounts in any position. Rated to 4500 PSI. Brass construction. Maximum temperature is 176° F. 3/8” MPT inlet and outlet with 1/4” FPT gauge port. 250 Volt, 3 Amp. 47’ Cord. Many Other Models Available! D ST5 / ST5H / ST505 Part No. Max. Flow Max. PSI Net Ea. NP ST5 8 GPM NP ST5H 16 GPM NP ST505 8 GPM NP ST6 8 GPM 4400 $ 28.70 3100 60.95 7300 88.35 4500 29.80 Flow Switches FS8 Model FS8 Flow Switch is rated to 3600 PSI and up to 8 GPM. Electrical ratings to 230 volt, 3 amp. Ports are 3/8" MPT. Must be mounted in vertical position to function properly. Maximum temperatures to 175° F. No. J4NB-A1000G * Rotation & Rated Part No. RPM Nozzle Port PSI SD A2VA-7116 3450 SD A1YA-7912 1725 SD J4NB-A1000G1725 SD B2TA-8249 3450 SD B2YA-8916 3450 SD A2YA-7916 3450 RH/RH RH/RH RH/LH RH/RH RH/RH RH/RH GPH Net Ea. 150/200 3/2 $ 63.50 100/1507/3101.00 80 24 219.50 150/30018/16152.00 150/2007/3146.50 150/2007/3108.00 Model 100975 Flow switch is rated to 12 gpm and 5000 psi. Can be mounted in any direction. (3) magnet design means shuttle will not stick. Rated to 5 amp and 250 volt. Ports are 3/8" FPT. Maximum temperatures to 180° F. * As viewed from shaft end. Fuel Solenoids Suntec Solenoid Shutoff Valves for use with Kerosene No. 1 or No. 2 fuel oil. Available in 24V, 115V or 220V. All shown are Non-Delay opening response. Standard with 19" lead wires. "R" Series are pump mount style. "C" Series are burner mount. Rated to 300 PSI. D Part No. Voltage Mount Net Ea. SD R261NL24AC/12DC Pump $ 43.80 SD C261NR24AC/12DC Burner 40.30 SD R642NL115 Pump38.60 SD C642NR115 Burner36.75 SD R753NL220 Pump38.35 SD C753NR220 Burner36.70 SD PVR38 Oil Safety Valve............. 66.25 Part No. Vacuum Rating Net Ea. HY 2510-1 HY 2510-7 HY 2510-17 1-1/2" Hg vac 2-1/2" Hg vac 3-1/2" Hg vac $ 16.95 16.95 16.95 100975 D Model 100879 and 100904 Flow Switches feature micro-switch technology which eliminates the reed switch. Valves activate on as little as 1/2 gpm flow. Maximum flows to 10 gpm. Valves can be mounted in any position. Rated to 4000 psi, 250 volts and 180° F. Switch rating is 5 amps. Ports are 3/8" FPT. Model 100879 has a "pilot" feature for use with gravity feed systems. Model 100904 is for pressure feed systems and does not have the pilot feature. Model 103011 and 100329 are designed to provide on/off switching for systems that require stop/start capability. Operating range is .75 to 18 GPM. Rated for 3 amp up to 250 volt. Maximum temperatures to 165° F. Construction is brass body with stainless and Buna internals. Ports are 3/8". 103011 is designed for pressure feed systems. 100329 has a “pilot feature” for gravity feed systems. Max. Min.Max. Part No. Pressure Flow Flow IP FS8 3600 PSI 1.0 GPM 8 GPM IP 100904 4000 PSI .5 GPM 10 GPM IP 100879 * 4000 PSI .5 GPM 10 GPM IP 100975 5000 PSI 1.25 GPM 12 GPM IP 103011 4000 PSI .75 GPM 18 GPM IP 100329 * 5000 PSI .5 GPM 16 GPM * Best for Prep Units. Vacuum Switches Vacuum Switches protect pumps from running dry by automatically shutting off motors when liquid is depleted or vacuum drops to a specific level. Rated for 110 volt or 220 volt up to 16 amps. Three Hg Vac. ratings to choose from. Rated to 140° F. Inlet port is 1/4" FPT. D 100879 D 103011 D Net Ea. $ 36.15 83.85 95.10 35.75 137.50 141.50 100329 D Pressure Switches D DULTMEIER SALES • OMAHA, NE D ActuationAmp Part No. Ports Pressure Rating Net Ea. GU 23180 1/4" MPT 360 PSI 5 amp $ 15.75 GU 23181 1/4" MPT 580 PSI 5 amp 16.10 GU 23175 1/4" MPT 580 PSI 15 amp 23.10 GU 23178 3/8" MPT 360 PSI 15 amp 26.25 1/4” Inlet (800) 228-9666 Designed to be used for Normally “on” or Normally “off” applications. Switches are rated to 250 volts and 5 or 15 amps as noted. Ports are either 1/4" MPT or 3/8" MPT. Rated to 3600 PSI and 194° F. • www.dultmeier.com • DAVENPORT, IA (800) 553-6975 E0602
© Copyright 2024