Designed and Manufactured by V7.15 Micro Technology Services, Inc. 11th year anniversary Duress and Emergency Notification System The Lynx System helps protect your most important assets Single Activation Lock Down M Tes onth t Fe ly a tu re M Tes onth t Fe ly atu re LynxKeyPro V10 operates logged off M Tes onth t Fe ly atu re LOCKDOWN SHELTER IN PLACE EVACUATE ASSISTANCE NEEDED Wireless Duress Buttons Mobile or Fixed Location M Tes onth t Fe ly atu re PoE Network Duress Buttons LynxIcons for Group/Emergency Notification Alarm Subject: Duress Button Pressed Message: Morris Building Room 122 Security Respond Immediately Alarm Subject: Lockdown Message: Follow Procedures Communicate to PCs, Windows Tablets, Macs, C•CURE9000, HDMI Monitors, Strobes, Radios, PA systems, IP Phones The LynxGuide Duress and Instant Alert System Lynx Duress and Emergency Notification System Features 1. Supervised Duress Alarms with a Monthly Test Feature ? PC-based - Keyboard Duress alarm - F9-F11, operates logged in, logged off or locked. ? PC-based - USB Duress Button, operates logged in, logged off or locked. ? Network Hardwired Duress button - PoE with Built in Gigabit switch. Wireless Fixed Location Duress Alarms - Fully supervised. Unique message per channel. ? Wireless Mobile Locating Duress Alarms - 900Mhz Fully Supervised. Room Accuracy. ? LynxNet ?Input Boxes - (4, 32-128 Channels) integrate existing duress alarms (Available Sept 2015). 2. Emergency Notification - Single Activation Lockdown There are various ways to activate a Lockdown. A single swipe with the special Red Lockdown access card issued to authorized personnel; immediately control doors and communicate the Lockdown information to all employees via Lynx. Other ways would be with the click of a mouse using the new LynxIconPro in Dispatch, via a Windows Tablet or Mobile Device or using one of our wireless buttons or PoE lockdown buttons. Facility wide alerts to all PCs with Popup messages and procedures to follow. ? Communicate via the network to HDMI Monitors, LED signs and Visual Lights in key locations ? Communicate verbal messages to existing IP Phones, Facility Radios and PA systems ? Send SMS Text Messages to Cell Phones, Verbal Messages to any 10 digit phone numbers ? 3. Radio Interface for existing alarms Communicate any alarms through your existing hand-held radios with the Lynx integration. Lynx improves response time, reduces the sharing of incorrect information and reduces workload and allows security personnel to be out patrolling. Take the Human element out of communicating alarms that require a response. 4. Server to Server communication enables multiple LynxGuide servers to communicate. Micro Technology Services, Inc. 1819 Firman Drive #137 Richardson, TX 75081 Sales (972) 231-6874 Ext 129 [email protected] The Lynx System is now in its 11th year - The LynxKeyPro keyboard and USB PC duress buttons as well as the network hardwired duress buttons now have a test feature that enables employees to test the alarm once a month, creating reports, building confidence for employees and confirming the location. This is one of the many reasons that 90+ VA Medical Centers use the Lynx System for duress. Many are now adding the emergency notification elements of the Lynx system to improve communication once they realized the limits of text/email in healthcare. Lynx now has the Certificate of Networthiness (CON) for use in Military Facilities. Lynx enables you to reduce the human element during an alarm, automatically sends the correct information to the appropriate personnel. A single activation can send different messages to different groups or take existing alarms that were sent to County radios and have them communicate only to County Dispatch. During a Lock Down, Severe Weather or any other issues you can now combine “popup” messages, visual strobes/LED signs, PA interface, HDMI Monitor interface, Verbal messages to SIP IP phones and mobile phones, text and email as well as communicate to your access control system. The group and broadcast notification has been enhanced with the new supervised LynxIcon with testing; combined with the improved speed of "popup" alarm notifications to PCs (5,000 Lynx "Popups" in under one minute) and the various looks and feel of the computer “popup”. We have expanded the number of PCs that can be notified to 10,000+. For multi-site locations or facilities the new Server to Server module allows servers to intercommunicate. Sincerely, Timothy J. Lee Manufactured and supported in the USA Available on GSA Timothy Lee VP, Sales VP, National Sales See the Lynx System Videos at www.LYNXGUIDE.com and much more information including upcoming Trade Shows For an Online Lynx Demonstration contact Tim Lee (972) 231-6874 ext 129 [email protected] 2 Network Duress and Emergency Notification Systems Contact (972) 231-6874 Ext 129 [email protected] WWW.LYNXGUIDE.COM Lynx System Overview INPUTS Included with LynxGuide Server LynxUSB Client Software USB Duress Buttons C CURE events INPUTS Lynx System Options Network Panic Buttons LynxNet Supervised LynxIconPro for PC s and Mobile Devices Connect to New or Existing Alarms LynxNet Emergency Notifications. 10 Included Supervised LynxIcons for PC s LOCKDOWN SHELTER IN PLACE EVACUATE Assistance Notifications MEDICAL ASSIST LynxKey Client Software PC or VDI Keyboard Alarms operate logged on LynxKeyPro Client Software PC Keyboard Alarms operate logged on or off 100 seats included SUPERVISOR JOINT COMMIS IS HERE NEEDED Wireless Alarms to The Monitor Wireless Alarms LynxNet LynxGuide Server Email RSS Feed Input Wireless Temperature Sensors RSS The LynxGuide Server is offered turn-key on a Dell server with 2,000, 5,000 or 10,000 server seats. Each LynxClient Software function or LynxNet device counts as one (1) server seat. The LynxGuide server software is available for installation on customer supplied servers. LynxMessenger Client Software PopUp to PCs, Windows Tablets, DVI and Macs Audio to Phones Lynx Voice Plan Text to Cell Phones Lynx Text Plan LynxGuide software licensing allows for a server to operate on a LAN covering a campus or facility including remote offices with less than 100 PCs. Separate facilities with more than 100 PCs require a LynxGuide server per facility. 200 Text SMS Messages per Month Audio to Existing IP Phone Systems SNPP Text Pagers Audio to Existing Radio Systems LynxNet Compatible with Windows 7, Windows 8, and Windows XP, Email RSS Server RSS C CURE events Audio to Existing PA Systems LynxNet Alarm Subject: Lockdown Message: Follow Procedures LED Display LynxSIGN OUTPUTS Included with LynxGuide Server LOCKDOWN Locks, Lights, Out of Sight Lockdown is called when there is a threat or hazard inside a college building Students: Relays to Existing Systems LynxNet l Move away from sight l Maintain silence Instructors/Staff: l Lock classroom door l Lights out l Move away from sight l Maintain silence l Wait for First Responders to open door HDMI Monitor Interface LynxNet Strobes and Light Outputs LynxNet OUTPUTS Lynx System Options Network Duress and Emergency Notification Systems Contact (972) 231-6874 Ext 129 [email protected] WWW.LYNXGUIDE.COM 3 LynxClient Software All of the LynxClient software has a Monthly Test Feature The LynxClient multi-function software allows PCs to send alarms and receive notifications from the LynxGuide server. The LynxClient software uses an msi installer that can be loaded on any Windows based PC, manually or deployed using software distribution tools. It may be deployed with any combination of features enabled or in a dormant mode, to be enabled when needed. The LynxClient software can be configured to be LynxIcon, LynxIconPro, LynxKey, LynxKeyPro, LynxUSB and LynxMessenger. All LynxClient software functions can be enabled or disabled from the LynxGuide server web interface. The system tray icon will indicate what LynxClient functions are enable on a client PC. Each LynxClient function that is enable uses one (1) LynxGuide server seat. System Tray Icon LynxIcon - Assistance Notifications MEDICAL ASSIST SUPERVISOR JOINT COMMIS CHEMICAL SPILL IS HERE NEEDED The LynxIcon client software function provides Assistance Notification Icons that are ideal for non duress events such as Medical Assistance, Supervisor Needed, Chemical Spill, etc. The LynxIcon can send instantly or pending, so the user can add additional information before sending the notification. The LynxIcons are easily accessed from the user’s PC and are fully configurable from the LynxGuide server. LynxIconPro - Emergency Management The LynxIconPro client software function is designed for key Emergency Management users, who have the authority to activate facility wide alerts and notifications. Situational Icons such as Lockdown, Shelter In Place, Active Shooter are pre-configurable and are accessible from any PC with the LynxClient installed by logging in with their Active Directory login. In SHELTER LOCKOUT LOCKDOWN EVACUATE IN PLACE addition, the Emergency Manager user can also access their Situational Icons by logging into their account on the LynxGuide server web interface Access from Mobile Devices from any PC or Mobile Device that can access the LynxGuide server. and Windows Tablets The LynxGuide server includes 10 Emergency Management Users Add additional LynxIconPro Users LYNX-ICONPRO 10 LynxIconPro EM Users LynxKey - Duress Alarm - operates when logged ON The LynxKey client software function provides a 2 key combination keyboard duress alarm, that allows users to send messages from a PC or VDI keyboard when the user is logged on. Labels for Keyboard keys are optional Supported VDIs: Citrix(5.0XenDesktop Citrix XenApp VMware Horizon View and higher) LynxKeyPro - Duress Alarm - operates when logged ON or OFF The LynxKeyPro client software function provides a 2 key combination keyboard duress alarm, that allows users to send messages from a PC when logged ON, logged OFF or LOCKED. The 2 key combinations F9-F11 or F1-F12 sends alarms to the LynxGuide Server. Red “PANIC” labels are included for marking the keyboard. The LynxGuide server includes some LynxKeyPro, more may be added. The Employee Test and Location Verification makes managing LynxKeyPro simple and improves employee confidence . Page 5. The B-Series LynxGuide Software includes 0 LynxKeyPro Client seats LynxKeyPro is a two key S-Series LynxGuide Server includes 100 LynxKeyPro Client seats The alarm combination The P-Series LynxGuide Server includes 200 LynxKeyPro Client seats Additional LynxKeyPro The A-Series LynxGuide Server includes 400 LynxKeyPro Client Seats LYNX-KEYPRO 25 LynxKeyPro Client License Seats includes 50 Red ‘PANIC” labels Monthly Test Feature The flexibility of the Lynx system has allowed us to be highly adaptive to building administrator needs allowing for our staff members to continue to feel safe and secure despite the stress caused by recent events. Jim White, Director of Technology Clark-Pleasant Community School Corporation Network Duress and Emergency Notification Systems Contact (972) 231-6874 Ext 129 [email protected] WWW.LYNXGUIDE.COM 4 LynxClient Duress Alarm Test Feature V10 LynxKey, LynxKeyPro, LynxUSB Duress Buttons The LynxKey, LynxKeyPro and LynxUSB Duress button has the test feature for creating reports, training employees and confirming location. The Locking version of the USB duress button has a test feature that can be performed by an officer with the reset key. 1. LynxKey, LynxKeyPro and the Lynx USB duress button allow employees to test the alarm each month as a true test of the two key combination or USB button. When logged in, the employee will be prompted (on your schedule) to test the alarm. The key combination or USB button will be temporarily de-activate while they go through the 30 second test. The PC will show the employee has correctly tested the alarm (or not) and this information will be recorded in the test report. The report will also show any PCs not tested within the test period. The Lynx System test feature has the added advantage of training the employee to become more familiar with the duress alarm and how to activate it. Popup on employee PC asks employee to test Lynx PC screen walks employee through the process 2. The optional Location Verification test prompts the employee to confirm the PC location record. If it is incorrect, the employee can enter the correct information and their extension number. Location reports allow the system administrator to verify the location change, format the message and update the location in the Lynx alarm information. 3. Once the test is complete, the test reports are available indicating which PCs tested the duress button and which did not. The reports also lists any location changes that need to be made. We have used the Lynxguide Emergency Notification and panic alarm server for the last four years. I am very pleased with the system. It is timely and cost effective. I know I have saved tens of thousands of dollars on panic alarm install simply by leveraging the lynxguide server to handle my panic alarms. The installation usually takes less that 5 minutes and staff really appreciate it. The emergency notification system is used frequently at our facility to get message out to staff that are away from their desk by SMS, email and auto Phone calls. Our behavioral health unit staff have been issued wireless panic alarm which are also part of the Lynxguide system. I would recommend this system to assist with emergency response and reduce the cost of installing panic alarms. John Williams, CHPA, Manager Public Safety, Prince William Hospital Network Duress and Emergency Notification Systems Contact (972) 231-6874 Ext 129 [email protected] WWW.LYNXGUIDE.COM 5 Output - PC Popup Alerts LynxMessenger “Popup” Alerts LynxMessenger Popups are a powerful communication tool, allowing alerts to be sent to PCs, Windows Tablets and Macs on your network. Popups will appear on the display, on top of what the user is working on, notifying them immediately. No yearly cost per client. The LynxMessenger client software function is a simple-to-use instant messaging program. The LynxClient software uses an msi installer that can be loaded on any Windows based PC, Windows Tablet manually or deployed using software distribution tools. The software can also be pushed out in a dormant mode to all PCs only enabling when needed. The Lynx popup is NOT blocked by system popup blockers. Alerts can be sent to individuals, facilitywide or area specific groups for notification issues. The PC can receive instant alerts from any Lynx System input device, such as LynxIcons, LynxIconPro, LynxKey “Hot Key” client software, Lynx-WLS receiver, and the LynxNet input devices. LynxMessenger will work on any PC or Mac that can reach the LynxGuide server. The LynxGuide S-Series Server supports up to 2,000 clients, the P-Series supports 5,000 clients, the A-Series 10,000 Clients. Each LynxMessenger function that is enable uses one (1) LynxGuide server seat. LynxMessenger Popup Alarms can include: Lynx “popups” appear instantly on top of what you are working on System Tray Icon JPG, BMP, PNG, GIF images - maps or photos PDF files - documents, Word documents, Excel spreadsheets Link to IP Video cameras or web sites for weather alerts, City or County issues. Recipient reply to “popup” alarms Log files record all alarms and response Alarms can be configured to allow recipient to respond with additional information Alarms can be configured to go straight out or go to pending to add specific information Associate a Wav sound file or Text to speech on the PCs/Macs receiving the alert The LynxMessenger “Popup” can take over the whole screen or be a scrolling message at the Top, Bottom or Middle of the screen appearing over and above what employees are working on. Each Alarm can be set up for the look and feel you would like based on Codes and other issues. The LynxMessenger “Popup” can take over the whole screen or can take over the corner of the screen. The LynxMessenger pops up on top of what someone is working on. This is very useful for informative messages that need employees attention, but not necessarily taking over the whole screen. Ideal for issues that are not always acknowledged via email. “Outlook is Down” “Traffic Issues”, “Water Main Break Update”, “The Joint Commission is Here”. The good thing about the small LynxMessenger Popup is that it does not overuse the look and feel for an Emergency alert. I have used the LYNX System for over five years and have found it to be the most reliable, user friendly and cost effective system for emergency notification. LYNX is an outstanding product that is supported by a truly professional sales and technical support staff. No matter what the concern they have a solution. This product is on the cutting edge and continually strives to stay ahead of the industry. We are building a new Justice Center and it will open in the Fall of 2014 and the LYNX System will be there! Chris Daley, Director of Security, County of Bucks, PA 6 Network Duress and Emergency Notification Systems Contact (972) 231-6874 Ext 129 [email protected] WWW.LYNXGUIDE.COM Lynx System Outputs Alarm Log files The Lynxguide server stores the Log files of all alarms sent and received as well as the system alarms. All alarm Logs may be accessed with Administrative Rights. Specific fields may be set up for others to access remotely. User Notification Subscription Phone, SMS text and email subscription Contact List & Group Management The LynxGuide allows users, employees and students to subscribe to receive Lynx notifications. The subscription page can be configured as Public or Private. The Public subscription page allows users to enter their contact information and select notification groups. The Private subscription page requires users to login with their Active Directory username and password, then users enter their contact information and select notification groups. All data entered by users is stored in the Lynx database and is added to the Lynx contact list. The contact list is the visual interface to all contact entries in the Lynx database. All outputs from the Lynx system require a contact list entry. Data can be entered manually, imported Active Directory, imported from a tab delimited text file and from the user subscription page. Contacts include email, SMS cell phone numbers, pager numbers, groups, PC/Mac names, Login names, all Lynx output devices and optionally phone numbers for voice calls. Individual contacts can be joined to multiple groups. Managing and editing contacts or groups is easy. SNPP - Text Messaging to Pagers The LynxGuide server can send text messages directly to an in-house paging system or 3rd party paging companies that have the capability to accept SNPP (Simple Network Paging Protocol) or SMTP (Simple Mail Transfer Protocol) messages. Contact your paging system vendor or manufacturer to verify that your paging system has this feature. Contact your 3rd party paging company for SNPP server information. SMTP - Email The LynxGuide server has a built-in email server. This allows for SMTP (Simple Mail Transfer Protocol) messages to be sent by the LynxGuide server. The LynxGuide server can alternately be configured to relay off your in-house email server. RSS Reader and RSS Server The LynxGuide server has a built-in RSS Feed Reader and RSS Feed Server. The RSS feed reader allows feeds such as NOAA, County or Industry Alerts to activate alarms within the Lynx system. The RSS Feed Server allows any alarm channel or alarm group to send RSS feeds. RSS readers that have been configured to the Lynx RSS feeds will receive the messages. Automate weather alerts from NOAA to mass notify of a Tornado Warning. RSS “We purchased the Lynx system as an alternative to the high cost of installation with panic devices. We found that the cost for each panic and the ability to install within 15 minutes was a great savings. The other nice piece is that it works well with an IP camera. You can program the nearest IP camera to activate when the panic alarm is tripped. The bonus to this was the mass communication system that comes along with it. We use it for all of our emergency codes. We have pushed the messaging software out to all of the PC's at the hospital. Technical Support is 110%. Very knowledgeable. Willing to answer any question and entertain any new ideas for the system. I have no complaints!” Bob Hirsch, Sr. Systems Administrator and Assistant Manager of Security, Loyola Univ Health System, IL NetworkDuress DuressNetwork and Emergency Notification Notification SystemsSystems Contact (972) 231-6874 Ext 129 [email protected] WWW.LYNXGUIDE.COM 800-644-8184 www.mitsi.com/security 7 Lynx System Inputs LYNX-WLS Wireless Locating System Wireless Fixed or Mobile Duress with Location Monthly Test Feature The Lynx-WLS - the Wireless Locating System integrates with the LynxGuide server. When a wireless duress button is activated, a signal is sent to the Lynx-WLS directly or using a 900 Mhz repeater network. The wireless alarms can be installed in fixed locations with the pre-determined alarm location message. Or the LYNX-WLS can triangulate the location of the wireless button using the repeater network data and sends the location information to the LynxGuide server via the LAN. Up to 960 unique devices can be installed. The LYNX-WLS can also take existing 900Mhz devices and integrate them into the Lynx system - adding all of the Lynx capabilities - Possibly you do not like the way the alarms communicate or you need the test feature. Lynx-WLS Compact wireless duress buttons with belt clip. LYNX-WLS-3 Low Voltage Repeater for locating or extending range. 900 Mhz Spread Spectrum Technology, not WiFi 802.11. Fixed Wireless Duress Alarms - with alarm location. Mobile Wireless Duress Alarms - with alarm location. Wireless Locating System for Fixed or Mobile devices The Lynx-WLS connects to a network connection and power. The wireless duress buttons are pre-programmed to the Lynx-WLS either for fixed or mobile use applications. For Fixed applications a repeater is only needed approximately every 10,000 square feet, based on building structure. For Mobile locating applications a repeater is needed approximately every 1,500 to 2,000 square feet, based on building structure. See example diagrams below. The Locating system requires a Lynx Technician onsite to configure the system after the Lynx-WLS and repeater network are installed. “CODE GRAY: Mary Smith Behavioral Health Building Near Room 520” Now when a mobile button is pressed the alarm goes out to PC s, Radios, Phones with the actual location With fixed location alarms the Building, Room, Name of the person and other information can be included Fixed Location. 3 story building. Mobile Locating System. 1 LYNX-WLS, 23 Repeaters, 50 Buttons Onsite Wireless Configuration is required for the Locating system once you have installed the hardware. 1 LYNX-WLS, 6 Repeaters, 120 Buttons The Lynx-WLS Mobile solution gives you the ability to have mobile wireless duress buttons in high risk areas that can locate the employee down to 5-8 feet. The notification is the fasted in the industry to response teams via computers, radios and other mobile device. The Lynx wireless mobile solution uses wireless 900 Mhz repeaters (14VAC) to locate to the alarm location. The repeaters are required every 40/50 feet in every direction. 8 Network Duress and Emergency Notification Systems Contact (972) 231-6874 Ext 129 [email protected] WWW.LYNXGUIDE.COM LYNX-WLS Wireless Alarm and Repeater Options Wireless supervised alarms are pre-configured to the Lynx-WLS Fully Supervised . Low Battery Notification . Battery Life 1- 3 years Each wireless device has a unique channel (up to 960) allowing a specific alarm message (Building, Room, Person and other details). The alarm message, based on the channel number, can go to specific groups. Repeaters with Battery Backup LYNX-WLT-PANIC-A Simple, single-button activation pendant. Comes with a belt clip or can be easily mounted under a desk .Push and hold. Fixed buttons have room location. LYNX-WLT-PANIC-B Twobutton activation, one channel pendant. Comes with a belt clip or can be easily mounted under a desk. Push and hold. Fixed buttons have can have exact room location. LYNX-WLT-IDPNC-3 The momentary (not push and hold) HUB Wireless Duress alarm is a supervised universal transmitter with a 6” wire connected to a HUB duress button. It is totally standalone battery powered. LYNX-WLT-IDPC-4 Locking LYNX-WLR-INDOOR Indoor Repeater required for Locating system or increases the range of fixed transmitters. 14VAC Supervised by the Lynx-WLS Low voltage w/Battery backup Dims: 6.5” x 3.5” x 1” LYNX-WLT-BILL-0 Wireless Bill Trap allows the unit to be fully supervised even in a metal cash drawer. LYNX WLR-OUTDOOR Outdoor Repeater for expanded coverage or for location. Supervised by the Lynx-WLS. Low Voltage w/Battery backup. 14VAC Dims: 7” x 7” x 3” Other Wireless Transmitters LYNX,WLT,PIR LYNX-WLT-PIR-1 LYNX-WLT-DOOR-1 LYNX,WLT,DOOR LYNX,WLT,UNIVERSAL LYNX-WLT-UNIV-1 LYNX-WLT-TMPH-E LYNX,WLT,TEMP-RH,EXT SENSOR OTHER TEMPERATURE SENSORS AVAILABLE Wireless Indoor Wall Mounted Buttons Ideal for Codes. “CODE SILVER” in Emergency Departments, Classrooms, Corridors. LYNX-WLT-IDPNC-2 The simple to install indoor wall mounted wireless button has a clear cover. Custom text and color based on your application. It instantly sends a wireless alert to the Lynx-WLS receiver. Available Hardwired PoE (Page 10) Avail: Yellow, Blue, Red, White, Green Dims: 8.5” (H), 5.5” (W), 4.5” (D) 3lbs. Monthly Test Feature LYNX-WLT-IDPNC-1 The indoor wall mounted wireless button is available without a cover. The color and text is customized. It instantly sends a wireless alert to the Lynx-WLS receiver. Available Hardwired PoE (Page 10). Avail: Yellow, Blue, Red, White, Green Dims: 5” (H), 4.5” (W), 3.3” (D) 1lbs. Wireless Outdoor Pole or Wall Mount Buttons The LYNX-WLT-ODPNC-3 battery powered, large, visible outdoor wireless Panic Box - Ideal for parking lots, garages and remote areas. Includes Enclosure Mounting Backplate, Pole Mounting Bracket w/Fasteners, Wall Mount Clips, Aluminum PowderCoated, Weatherproof Red Panic Button. Very cost effective and easy to install. Dimensions: 12”(H), 10”(W), 6"(D) LYNX-MON-0 LYNX-WLT-MANDN-1 The “Mandown button” sends out a duress alarm through the LYNX-WLS if the button is pressed. If the unit it not vertical, it beeps for 30 seconds to alert the employee to correct it. If not, it sends out a “Mandown” alarm possibly for medical assistance. It instantly sends a wireless alert to the Lynx-WLS receiver. The unit comes in a case with a belt clip. Wireless Monitor The Wireless Monitor was designed to operate either as a standalone wireless solution or as part of the Lynx system. It is ideal for locations such as Clinics and off sites that need to receive local alarms. Network Duress and Emergency Notification Systems Contact (972) 231-6874 Ext 129 [email protected] WWW.LYNXGUIDE.COM 9 Optional Inputs Duress Buttons, Tie into existing alarms LynxUSB V10 USB Hardwired Duress Buttons Operates when PC is logged off The LynxUSB allows you to install a hardwired duress button anywhere in your facility that there is a Windows based PC connected to the network. Simply load the client software and install the LynxUSB or LynxUSB Locking duress button on the PC. Alerts are sent to the LynxGuide server even when the PC is logged off. The Locking USB Duress Button requires a tool (supplied) to re- activated. The activation and re-activation are recorded in the log files. The USB button test feature has employees test the button each month, creating reports, confidence for employees and confirms location information. The LynxUSB is very cost-effective and simple to install. Monthly Test Feature LYNX-USB-0 LYNX-USB-L LynxNETPB USB Hardwired Duress Button USB Hardwired Duress Button - Locking Network Hardwired Duress Button (No PC required) The LynxNetPB is a network duress button device with built in Gigabit switch, that when activated it instantly sends an alert to the LynxGuide server via the network. The Hold Up Button (HUB) has a green LED to show connectivity to the server, changing to amber when pressed. The LYNX-NETPB-M (PP PoE) has a momentary panic button and a locking version is available. Simple to install, requires network connection and power. The duress Built-in Gigabit switch button attaches to the LynxNetPB with an 8 foot cable. Available 12VDC or Power Over Ethernet. The Monthly Test enables the employees to test the alarm and creates a report for security. LYNX-N-PB-M LYNX-N-PP-M Network 12VDC with HUB style Duress Button Network PoE with HUB style Duress Button Monthly Test Feature The network wall mounted button with (or without) a cover connects directly to the network via the LynxNet PoE device. The Green LED indicates connectivity. Custom color, text. PoE Wall Mounted LynxNET 32-128 Inputs Monthly Test Feature Coming LYNX-N-PP-WWC Network PoE, Custom Wall Mounted Button with Cover LYNX-N-PP-WNC Network PoE, Custom Wall Mounted Button with No Cover Tie into existing alarms anywhere on your network The LynxNet input devices are available in 1, 4, 32, 64, 96 or 128 input channel configurations. The LynxNeti series input device is ideal for applications where existing duress systems need updating or large numbers of points need to be monitored. Installed panic buttons and wiring can be used with the LynxNet-I28i to allow the alarms to be sent to the LynxGuide system. The LynxNeti series are wall mountable for industrial environments and available in 32, 64, 96 or 128 input models to meet a variety of applications. The LynxNeti series devices can instantly send alerts from any of the 32-128 dry contact closure inputs. Inputs are programmable normally open (N.O.) or normally closed (N.C.). End of Line (EOL) supervision provides connection integrity throughout the installation using EOL resistors. EOL resistor range is 2.2K ohms to 5.1K ohms. The new test feature will make it easy to test alarms and create monthly reports. LynxNet 128i series Dimensions: 18” (H), 12” (W), 4” (D) Wt: 17.5lbs 1 or 4 Inputs LYNX-1i-3 LYNX-4i-3 LYNX-32i-3 LYNX-64i-3 LYNX-96i-3 LYNX-128i-3 10 1 Channel 4 Channel 32 Channel 64 Channel 96 Channel 128 Channel Some Applications: The LynxNet 32-128 use easy to install connectors that are removable to make wiring easy. Existing Duress/Door Alarms Infant Abduction systems Wandering Patient systems Temperature Alarms Network Duress and Emergency Notification Systems Contact (972) 231-6874 Ext 129 [email protected] WWW.LYNXGUIDE.COM Optional Outputs Indoor Network Strobes and Lights Indoor IP 3 Color Situation Status Light LynxStrobe-C The LynxStrb-C enables you to simply connect the solid Light to a network connection and power and be able to remotely change the light from GREEN to flashing AMBER or RED (programmable per alarm) depending on the area or room status via Lynx. Violence in the Emergency Department - a desktop icon, wall mounted button or any Lynx alarm can instantly change the color of the light. The occupancy status light of secure rooms in Behavioral Health or any other location can change based on procedures or events. AC powered. Activate a wireless wall mounted “CODE SILVER” alarm and instantly activate Status Lights around the location that flash RED to alert people to stay away. LYNX-STRB-C Lynx Indoor Light, Network, GREEN, AMBER, RED Indoor 4 Color IP Strobe with built in audible tone LynxStrobe-1 The LynxStrobe provides visual notification with audible tone of alerts via your network. The four colors Red, Yellow, Green, Blue are ideal for Codes, etc. The rugged steel construction and wall mountable design (vertical) make it ideal for lobbies, classrooms and other public areas. Simple to install, requires network connection and power. 12 VDC power supply is included. The LynxStrobe master can have up to 3 additional remote strobes connected to it within 100 feet – ideal for hallways and locations that all need to be activated at the same time. Works well with the color coded Lockdown, Shelter in Place, Evacuate and Lockout icons or other alarms. Dimensions 13” (L), 4 1/8” (W), 3 3/4” (D) LYNX-STRB-1 4 Color IP Strobe Network master Strobe Indoor Visual IP Strobe LYNX-STRB-A LynxStrobe Lynx Indoor Strobe, Blue, 50 ft cable, Network Interface Includes a single indoor strobe and custom cabling with network interface. Remote single strobe can be activated by any of the software or hardware alarms. Simple to install, requires network connection and power. 12 VDC power supply is included. Strobe Dimensions: 2 1/4” (L), 4” (W), 2” (D) Outdoor IP Strobe with built in LOUD 122 dB Siren LYNX-STRB-B LynxStrobe-B Lynx Outdoor Strobe, Red, 50 ft cable, Network Interface Visual LED Sign The LynxSign is a networked visual LED text display sign that is activated by the LYNX system, sending out alarm messages via your network to signs that can be mounted in entrances and other public locations as well as Dispatch. Includes mounting hardware for wall or ceiling mount. AC powered. LYNX-SIGN-1 LynxSIGN Dimensions: 31 1/4”(W)x 6 1/4”(H)x 3”(D) LynxSign 16 Characters x 2 Lines LED sign Network Duress and Emergency Notification Systems Contact (972) 231-6874 Ext 129 [email protected] WWW.LYNXGUIDE.COM 11 Optional Outputs Verbal, Visual and Output Notifications The Lynx System enables you to reduce the human element during an alarm; improving response times, reducing manpower costs and eliminating mistakes LynxDispatcher Lynx Radio Verbal Notification Output The LynxDispatcher allows instant Radio broadcast of alert messages using your existing radio system. The LynxDispatcher allows any of your Lynx alarms - software or hardware to communicate to your existing radio system. The messages can be pre-recorded wave files or you can use the built-in text to speech feature. For applications with variables, the alarm subject with the additional message is converted to speech and verbalized through your radio system. This makes it even more powerful used with the LynxIcons when additional information is typed in or for the PC based duress alarms with their location information. The LynxDispatcher will broadcast on the one channel and frequency of the radio you supply. More than one LynxDispatcher may be used to cover multiple radio frequencies and channels. Wall mounted Rugged Metal House. Dimensions 6 3/4"(W),17 1/2” (w/o antenna) (H), 3" (D) LYNX-DISP-3 LynxNet Radio Interface Customer Supplied Radio The LynxDispatcher requires you to supply one of YOUR radios for permanent installation The LYNX System enables C•CURE events to be verbally communicated directly to your existing radios. The LYNX integration to C•CURE enables events from C•CURE to be mapped to LYNX. Based on the type of event the verbal message to the radios can be programmed to go out 24/7 or on a schedule. The SDK enables alarms from Lynx to create events in C•CURE or use Lynx to communicate events from C•CURE to any of the Lynx outputs. LYNX-C-SDK LYNX,C•CURE,SDK,INTERFACE LynxPA Interface to your existing PA system The LynxPA device outputs line level or up to 1/2 watt audio to you PA system. The LynxGuide server streams wave files or text to speech to the LynxPA when an alarm is activated. A sound card is required to be installed in the LynxGuide server to use the LynxPA. The LynxPA can also be tied into other audio systems that can take a line level audio input such as an Emergency Broadcast system.12 VDC power supply is included. LYNX-PA-3 LynxPA Audio output device LynxNET4O-64O 4 - 64 Channel Output device The LynxNetO output devices are available in 4, 16, 32, 48 or 64 relay outputs that are controlled by the LynxGuide server. The relays can be activated by any of the Lynx systems inputs. The 8 amp power relay model allows direct control of devices requiring power to be switched for activation. The 1 amp relay model has gold relay contacts to allow control of low voltage devices that require a dry contact closure. Both models are factory configured for “Normally Opened” operation, but can be simple modified for “Normally Closed” operation. Ideal for tying into your access control system. 4O LYNX-4O-31 LYNX-16O-31 LYNX-32O-31 LYNX-48O-31 LYNX-64O-31 For 1 amp Relay use part # LYNX-XXX-32 12 4 Channel Hardwired, 8 amp Relay, Output device 16 Channel Hardwired, 8 amp Relay, Output device 32 Channel Hardwired, 8 amp Relay, Output device 48 Channel Hardwired, 8 amp Relay, Output device 64 Channel Hardwired, 8 amp Relay, Output device LynxNet 64O series Dims: 18” (H), 12” (W), 4” (D) Wt: 17.5lbs Network Duress and Emergency Notification Systems Contact (972) 231-6874 Ext 129 [email protected] WWW.LYNXGUIDE.COM LynxGuide System Server Configurations The LynxGuide System Server is a turn-key server with the LynxGuide software pre-loaded on a Dell server, configured and tested for quick installation of the system. The S-series up to 2,000 client seats, the P-series up to 5,000 client seats and the A-series 10,000 seats. Each PC/Mac client software installation of the Desktop Icon, LynxMessenger, LynxKey or LynxKeyPro is counted as a client seat. Any LynxNet device, such as LynxStrobe, LynxWLS, LynxPA or LynxDispatcher, also counts as one client seat per device. Desktop Icons are unlimited because they are not supervised. The S-series, P-series and A-series allow for sizing of the LynxGuide server to meet your facilities needs. LynxGuide software license allows for the server to operate on a facilities LAN covering multiple buildings and remote offices. Separate facilities with 100 or more clients require a LynxGuide server per facility. The optional S2S module enables communication between servers. LynxGuide S - Series Server configurations - 2,000 Client seats Pre-configured Lynxguide server. 100 LynxKeyPro Panic Alarms. Combine up to 2,000 Lynx Key or LynxMessenger clients or Lynxnet devices. Unlimited Desktop Icons. 1 year of Online and phone support. LynxGuide Dell PowerEdge R420 Server LYNX-G-DR-0 LynxGuide P - Series Server configurations - 5,000 Client seats Pre-configured Lynxguide server. 200 LynxKeyPro Panic Alarms. Combine up to 5,000 Lynx Key or LynxMessenger clients or Lynxnet devices. Unlimited Desktop Icons. 1 year of Online and phone support. LynxGuide Dell PowerEdge R420 Server LYNX-G-DR-1 LynxGuide A - Series Server configurations - 10,000 Client seats Pre-configured Lynxguide server. 400 LynxKeyPro Panic Alarms. Combine up to 10,000 Lynx Key or LynxMessenger clients or Lynxnet devices. Unlimited Desktop Icons. 1 year of Online and phone support. LynxGuide Dell PowerEdge R420 Server Part Number LynxGuide Server Server Seats LynxKeyPro LynxIconPro Server Type Form Factor CPU RAM Raid HDD Power Supply Windows OS OS Version LYNX-G-DR-4 LYNX-G-DR-0 LYNX-G-DR-1 S - Series P - Series 2,000 5,000 100 seats included 200 seats included 10 Users 10 Users Dell PowerEdge R420 Dell PowerEdge R420 1U - Rack Mountable 1U - Rack Mountable Dual-Quad Core Dual-Quad Core 8GB 16GB SAS RAID 1 SAS RAID 5 Two 500 GB, 7.2K RPM Three 146 GB,15K RPM Dual / Redundant Dual / Redundant 2012 R2 Std Edition 2012 R2 Std Edition 64-bit 64-bit LYNX-G-DR-4 A - Series 10,000 400 seats included 10 Users Dell PowerEdge R420 1U - Rack Mountable Dual-Quad Core 16GB SAS RAID 5 Three 146 GB,15K RPM Dual / Redundant 2012 R2 Std Edition 64-bit TAA (Trade Agreement Act) compliant servers available for the Federal Government LynxGuide - Server Software - 100, 2,000, 5,000, 10,000 Client seats The LynxGuide server software is available for installation on customer supplied servers. The server should meet the above specification and have the operating system software installed. We recommend the server is shipped to our factory in Texas for LynxGuide software installation, configuration and quality testing. The LynxGuide server software is available for Virtual Implementations for smaller deployments. Please contact Lynx to discuss your virtual implementation. (972) 231-6874 Ext 131 LYNX-BV-NOS LYNX-SV-NOS LYNX-PV-NOS LYNX-AV-NOS LynxGuide B-Series Software (100 Client seats 0 LynxKeyPro Included) LynxGuide S-Series Software ( 2,000 Client seats - 100 LynxKeyPro Included) LynxGuide P-Series Software ( 5,000 Client seats - 200 LynxKeyPro Included) LynxGuide A-Series Software (10,000 Client seats - 400 LynxKeyPro Included) Network Duress and Emergency Notification Systems Contact (972) 231-6874 Ext 129 [email protected] WWW.LYNXGUIDE.COM 13 IT Information - Frequently Asked Questions about LYNX The LynxGuide System Server is a turn-key server with the LynxGuide software pre-loaded on a Dell server, configured and quality tested for quick installation on your LAN. The LynxClient software functions LynxIcon, LynxIconPro, LynxKey, LynxKeyPro and LynxUSB allow PCs to alerts to the LynxGuide server. PCs with the LynxMessenger function enabled can receive alerts from the LynxGuide server. The LynxGuide system is typically operated by the security department, but the IT’s role is critical for server setup and MSI deployment. Each LynxClient function that is enable uses one (1) LynxGuide server seat. LynxGuide Server License grants the customer the right to use the software at a single campus or facility. Use outside your campus or facility or over the public Internet is prohibited to facilities with more that 100 PCs with the LynxClient software installed. Facilities over 100 PCs requires a LynxGuide server. Network Assign the LynxGuide Server a Static IP address, add to your DNS and add to your domain if required. The LynxGuide system server uses minimal network bandwidth when there is no activity, but will utilize more bandwidth to launch large scale notifications based on the content of the messages. Ports The LynxGuide server needs inbound ports 80,3000,10114,10115,10116,10117,10118,10119 opened. Any LynxNet device needs inbound ports 80 open. For LynxSMS and LynxVoice Plans the LynxGuide server must be able to connect to http://sms1.mitsi.com and http://sms2.mitsi.com E-mail LynxGuide has a built in SMTP server or the SMTP traffic can be relayed through your existing mail server. Active Directory System operator Login can use Active Directory to authenticate user login. Virus Scanning Virus scanners do not interfere with the operation of the LynxGuide Server. Database The LynxGuide Server uses Microsoft SQL Server Express. You can install Microsoft SQL Server Standard Edition on your server. The standard LynxGuide server does use a local DB. Remote DBs can be supported, however if the LynxGuide server can not connect to the remote DB, no alarms will be processed. Supervision LynxClient and LynxNet Devices check-in with the LynxGuide Server by default every 5 minute. Supervision packet are less than 1Kb. LynxClient Software Installation LynxClient is a 4 Mb MSI and can be manually installed or distributed using your software distribution tools to PCs. LynxClient can be deployed in a dormant mode for remote activation. Location Information for LynxClient software The information for determining the location of the PC that launched a Lynx alarm is stored on the LynxGuide server. Each client workstation uses the computer name as a unique identifier. The LynxGuide server uses the “Macro Lookup table” to translate the unique identifier into useful location information. There is a two-column table in the Lynx SQL database called “Lookup” that contains the unique identifier in the “From” column and the corresponding location in the “To” column. The LynxClient test feature allows for users to provide the initial data or verify the stored data as part of the monthly test. When users provide information, it is presented in an administration level panel to verify before updating the “Macro Lookup table”. This updated location data is exportable to share with IT. Fail-over Configuration The Lynx system may be set up in a Fail-over configuration. This will require two LynxGuide servers and a Fail-over package. LYNX-FO-WSQ LYNX-FO-DLB LYNX-FO-SWO SFTWR,LYNX,FAILOVER,UPGRADE,WITH SQL and Single Load Balancer SFTWR,LYNX,FAILOVER,UPGRADE,WITH SQL and Dual Load Balancer SFTWR,LYNX,FAILOVER,SOFTWARE ONLY Server to Server Communication For those that have multiple LynxGuide servers, the Server to Server option allows the LynxGuide servers to operate locally and communicate to other LynxGuide servers. One LYNX-S2S-1 is required per server. SFTWR,LYNX,SVR TO SVR, LINK LYNX-S2S-1 Technical Questions: (972) 231-6874 Ext 131 or email [email protected] I really appreciate his help and just wanted you to know that his customer service was absolutely Top Notch! If I could clone a few of him and have them work for me I would have no worries! Large Government facility in Arizona 14 Network Duress and Emergency Notification Systems Contact (972) 231-6874 Ext 129 [email protected] WWW.LYNXGUIDE.COM Lynx System Phone, SMS, Training and Support Optional SIP Interface for IP Phones LynxVOIP Verbal Messages to IP Phone Communications Manager via network connection. Using a SIP interface LynxVOIP dials an extension, call group or paging group that is configured in CallManager. Add on software to the LynxGuide server. LYNX-IP-INT-0 LYNX,IP PHONE INTERFACE No annual or per user fees Optional Yearly Verbal Phone calling LynxVoicePlan Verbal Messages to any 10 digit phone number. The Lynx Voice Plan lets you send verbal text-to-speech messages to specific USA 10 digit phone numbers when an alarm is activated. The text message is automatically changed from text to a verbal message. The Lynx System also logs if the call is answered by a person or answering machine. Each telephone number called is a minimum of 1 minute. Plans are for 12 Months. Note: 911 Call Centers do not accept automated calls VOICE PLAN, 1,000 PLAN, MINS Per Year LYNX-VP-1K VOICE PLAN, 2,000 PLAN, MINS Per Year LYNX-VP-2K VOICE PLAN, 5,000 PLAN, MINS Per Year LYNX-VP-5K VOICE PLAN, 10,000 PLAN, MINS Per Year LYNX-VP-10K VOICE PLAN, 20,000 PLAN, MINS Per Year LYNX-VP-20K Optional Yearly SMS text messaging LYNXTextPlan Lynx Text Plan allows the Lynx system to send large scale SMS messages to USA cell phones. The LynxGuide server’s built in subscription page allows employees or students to subscribe to receive text notification. SMS credits are pre-purchased, applied to customers account and deducted when SMS messages are sent. Plans are for 12 Months. LYNX-SMS10K LYNX-SMS25K LYNX-SMS50K LYNX-SMS100K SMS-PRO,10,000 PLAN, SMS per year SMS-PRO,25,000 PLAN, SMS per year SMS-PRO,50,000 PLAN, SMS per year SMS-PRO,100,000 PLAN,SMS per year Optional LYNX On-site Training MTSI (Lynx) do not install the Lynxguide server, software or hardware. Due to the security restraints of your IT department we are only able to assist online or on the phone, but not actually push out the software etc. As far as the Lynxguide hardware, everything is low voltage and is designed to be installed in-house or you can work with your authorized local integrator. We are always there to assist with any technical questions. LYNX-TRN-1D LYNX-TRN-2D One day On-site Training Two days On-site Training A Lynx Engineer will come on site and train your staff on management and implementation of the Lynx system. The price includes all travel related costs within the USA. Training is scheduled after the Lynx System has been installed and pilot deployment has started. 4-6 week lead time for scheduling on site trips. Lynx System Yearly Support and Software Updates LYNX-SUP-1Y-SSA LYNX SUPPORT, SERVER, 1 YEAR Lynx system includes the 1st year of support, service and software updates. Purchase up to 3 years in advance Support includes: Access to our Technical Support Team, Telephone Support, 8:00am – 5:00pm CST, Monday – Friday Telephone Support, Emergency after Hours, Product Software Updates – major and minor releases. Online GoToMeeting Training and Support Network Duress and Emergency Notification Systems Contact (972) 231-6874 Ext 129 [email protected] WWW.LYNXGUIDE.COM 15 Output - HDMI Monitor Popup Alerts LynxNetMessenger Alarm Subject: Duress Button Pressed Message: Morris Building Room 122 Security Respond Immediately NE W Network Monitor “Popup” Alerts The LynxNetMessenger is a powerful new communication tool, allowing Lynx alerts to be sent to desktop and wall mounted HDMI Monitors. Ideal for locations you need to add visual alerts or override the information being displayed on existing HDMI displays. If the Monitor has audio Lynx can communicates verbal messages or an audible tone. Applications: Send alerts to locations without PCs Send alerts to locations that PCs are off or log off Send alerts to locations that need a large display HDMI Monitor and cable not included LYNX-NETM-1 LYNX, NETWORK, MESSENGER The LynxNetMessenger (Part Number: LYNX-NETM-1) is a simple-to-use network appliance that enables Lynx alerts to “popup” on HDMI monitors. Now any of your Lynx alerts can “popup” on standalone Monitors in addition to PCs/Macs that have the LynxMessenger software running on them. This is ideal for large public displays in locations such as Building Entrances, Cafeterias, Security Dispatch. The LYNX-NM is also useful for locations that do not have PCs or the PCs may be turned off/logged off - such as Conference Rooms or Classrooms. The LYNX-NM can be used when duress alarms or other Lynx alerts need to be sent to personnel that do not have access to Facility supplied PCs - such as contract security employees. The LYNX-NM requires a network connection, 12VDC power, HDMI input and HDMI output connections. For areas you are simply adding an HDMI Monitor and the LYNX-NM you simply use the HDMI output. For locations you already have an HDMI Monitor you simply connect the existing feed into the LYNX-NM HDMI input and connect the existing Monitor to the HDMI output. Features: Fully Supervised Set for pre-determine length of display time Or de-activate via a desktop icon or other Lynx input Audible tone or verbal message using the Monitor’s speakers LynxNetMessenger Popups alerts can include images HDMI output to connect to Monitors used only for Lynx Built in HDMI switch allows override of existing HDMI feed Alarm Subject: Shelter In Place Message: Tornado Warning Communicate C•CURE events to your existing Security Radios LYNX-CTNL-1 LYNX,CONTROLLER Radio interface requires you to supply s radios for integration LYNX-DISP-3 LYNX-C-SDK LYNX,DISPATCHER LYNX,CCURE,SDK,INTERFACE For those that would like to only communicate C•CURE events to radios and do not want to use the LynxGuide software we have the LynxController. The LynxController is an appliance that can directly communicate events from C•CURE9000 V2.20, V2.30 to your existing radios via the LynxDispatcher. If you would like to add any of the Lynx Hardware devices to create events in C•CURE9000 and do not need any of the LynxGuide software capabilities you can use the LynxController appliance. The Lynx System enables you to reduce the human element during an alarm; improving response times, manpower costs and eliminating mistakes Network Duress and Emergency Notification Systems Contact (972) 231-6874 Ext 129 [email protected] WWW.LYNXGUIDE.COM
© Copyright 2024