Polymers Product Range
LOXIM PC / PBT Test Method Typical Properties* ASTM PC / ABS 600 00HB 60E 600 00HB 60J 600 00HBUV 60B 610 00HB 60A 630 00HB 60A 500 00HB 50A 500 00HB 50B 500 00HB 50C 1.18 1.22 1.20 1.30 1.45 1.14 1.15 1.11 Unit Physical Specific Gravity D 792 Mould Shrinkage **** D 955 % 0.3-0.9a 0.3-0.8a 0.3-0.9a 0.4-0.7a 0.4-0.6a 0.5-0.7a 0.5-0.7a 0.5-0.7a - % - - - 10 30 - - - Tensile Strength at Yield D 638 MPa 52 55 55 80 120 55 55 50 Flexural Strength D 790 MPa 80 90 85 135 165 90 90 85 Flexural Modulus D 790 MPa 2100 2500 2400 4100 7500 2500 2450 2400 Notched Impact Strength IZOD @ 23° C D 256 J/m 800 750 750 95 160 600 520 400 Notched Impact Strength IZOD @ -30° C D 256 J/m 550 200 250 - - 525 375 225 UL 94 - - - - - - - - - D 648 °C 89 105 95 115 145 108 98 91 Reinforcement Mechanical Flame Retardancy** @1.6mm Thickness Thermal Heat Deflection Temperature, 1.8 MPa NOTE: *) Typical value only. Variation with tolerances are possible, in various colours and application. **) This rating is not intended to reflect hazards presented by this or any other material under actual fire. ****) For glass reinforced grades variations are possible depending on the glass fiber orientation. a - Shrinkage value are indicative and may not be considered for Design purpose. Given that shrinkage is affected by many factors, it is the user’s responsibility to verify the shrinkage for their own mold design and molding conditions All grades are available with UV stability and customized colors. Value shown above are indicative only, and can vary by application process. Please consult us for additional specs if desired. LOXIM INDUSTRIES LIMITED, Plot No. 184-185/2, Sanand – Viramgam Highway, Iyava Village, Sanand 382110, Dist. Ahmedabad, INDIA. Tel.: +91-2717-308000 • Fax: +91-2717-308001 • [email protected] • www.loxim.com LOXIM Polycarbonate (PC) Test Method Typical Properties* ASTM 100 00 V0 10R 100 00 V2 10A 110 01V0 10A 120 01V0 10A 130 01V0 10A 130 01HB 10A 1.21 1.2 1.28 1.36 1.44 1.43 Unit Physical Specific Gravity D 792 Mould Shrinkage **** D 955 % 0.5-0.7a 0.5-0.7a 0.3-0.5a 0.2-0.4a 0.1-0.3a 0.1-0.3a - % - - 10 20 30 30 Tensile Strength at Yield D 638 MPa 60 60 65 90 115 125 Elongation at Break D 638 % >100 >100 9 3 2 2 Flexural Strength D 790 MPa 95 95 110 140 150 150 Flexural Modulus D 790 MPa 2400 2400 3500 5500 6500 6600 Notched Impact Strength IZOD D 256 J/m 750 800 105 115 130 150 UL 94 - V0 V2 V0 V0 V0 HB D 648 °C 135 135 140 140 145 145 Reinforcement Mechanical Flame Retardancy** @1.6mm Thickness Thermal Heat Deflection Temperature, 1.8 MPa NOTE: *) Typical value only. Variation with tolerances are possible, in various colours and application. **) This rating is not intended to reflect hazards presented by this or any other material under actual fire. ****) For glass reinforced grades variations are possible depending on the glass fiber orientation. a - Shrinkage value are indicative and may not be considered for Design purpose. Given that shrinkage is affected by many factors, it is the user’s responsibility to verify the shrinkage for their own mold design and molding conditions All grades are available with UV stability and customized Opaque Colors. Value shown above are indicative only, and can vary by application process. Please consult us for additional specs if desired. LOXIM INDUSTRIES LIMITED, Plot No. 184-185/2, Sanand – Viramgam Highway, Iyava Village, Sanand 382110, Dist. Ahmedabad, INDIA. Tel.: +91-2717-308000 • Fax: +91-2717-308001 • [email protected] • www.loxim.com LOXIM Typical Properties* Polyamide - 6 Test Method ASTM 300 00 HB 300 00 30A HBHI 30A 315 01HB 30A 330 01HB 30C 330 01HB 30A 340 01HB 330 12 HB 330 03 HB 300 00 V0 320 01 V2 330 01 V0 30C 30A 30A 34P 32AH 34P Unit Physical Specific Gravity D792 1.13 1.06 1.25 1.36 1.35 1.46 1.36 1.36 1.18 1.35 1.45 Mould Shrinkage**** D 955 % 1.1-1.8a 1.1-1.6a 0.4-1.0a 0.3-0.8a 0.3-0.8a 0.2-08a 0.4-0.8a 0.4-0.7a 0.9-1.5a 0.5-1.1a 0.4-1.0a - % - - 15 30 30 40 30 30 - 20 30 Tensile Strength at Break D638 MPa 79 47 125 175 165 180 110 75 80 80 140 Elongation at Break D638 % 55 >100 3 3 4 2.5 2.5 15 35 3 4 Flexural Strength D790 MPa 110 65 160 240 230 280 180 150 115 160 195 Flexural Modulus D790 MPa 3000 1900 5500 8500 8500 11250 7000 5800 3100 6000 8000 Notched Impact Strength IZOD D256 J/m 55 800 75 140 225 150 80 55 75 45 100 UL 94 - HB HB HB HB HB HB HB HB V0 V2 V0 D 648 °C 65 50 190 205 200 215 180 75 135 150 210 Reinforcement Mechanical Flame Retardancy** @1.6mm Thickness Thermal Heat Deflection Temperature, 1.8 MPa NOTE: *) Typical value only. Variation with tolerances are possible, in various colours and application. **) This rating is not intended to reflect hazards presented by this or any other material under actual fire. ****) For glass reinforced grades variations are possible depending on the glass fiber orientation. a - Shrinkage value are indicative and may not be considered for Design purpose. Given that shrinkage is affected by many factors, it is the user’s responsibility to verify the shrinkage for their own mold design and molding conditions All grades are available with heat stability, UV stability and customized colors. Value shown above are indicative only, and can vary by application process. Please consult us for additional specs if desired. LOXIM INDUSTRIES LIMITED, Plot No. 184-185/2, Sanand – Viramgam Highway, Iyava Village, Sanand 382110, Dist. Ahmedabad, INDIA. Tel.: +91-2717-308000 • Fax: +91-2717-308001 • [email protected] • www.loxim.com LOXIM Typical Properties* Polyamide - 66 Test Method ASTM 400 00 HB 425 01 HB 430 01HB 433 01HB 435 01HB 1.39 1.41 400 00 HB 400 00 V0 425 01 V0 42SG 44P 44P Unit Physical Specific Gravity D792 Mould Shrinkage**** D 955 % 1.3-2.0 0.5-1.2 0.4-1.1 0.3-1.1 0.3-1.0 1.1-1.8 1.3-2.0 0.4-1.2 - % - 25 30 33 35 1 - 25 Tensile Strength at Break D638 MPa 75 150 185 190 200 70 65 150 Elongation at Break D638 % 20 3 3 3 3 20 15 3 Flexural Strength D790 MPa 110 215 285 290 300 100 100 210 Flexural Modulus D790 MPa 2900 6000 8500 9000 10000 2900 2800 7300 Notched Impact Strength IZOD D256 J/m 55 100 140 145 150 85 50 115 UL 94 - HB HB HB HB HB HB V0 V0 D 648 °C 73 245 250 250 250 68 80 245 Reinforcement 1.14 1.32 a 1.36 a a a 1.15 a 1.18 a 1.34 a a Mechanical Flame Retardancy** @1.6mm Thickness Thermal Heat Deflection Temperature, 1.8 MPa NOTE: *) Typical value only. Variation with tolerances are possible, in various colours and application. **) This rating is not intended to reflect hazards presented by this or any other material under actual fire. ****) For glass reinforced grades variations are possible depending on the glass fiber orientation. a - Shrinkage value are indicative and may not be considered for Design purpose. Given that shrinkage is affected by many factors, it is the user’s responsibility to verify the shrinkage for their own mold design and molding conditions All grades are available with heat stability, UV stability and customized colors. Value shown above are indicative only, and can vary by application process. Please consult us for additional specs if desired. LOXIM INDUSTRIES LIMITED, Plot No. 184-185/2, Sanand – Viramgam Highway, Iyava Village, Sanand 382110, Dist. Ahmedabad, INDIA. Tel.: +91-2717-308000 • Fax: +91-2717-308001 • [email protected] • www.loxim.com LOXIM Polypropylene Test Method Typical Properties* ASTM Unit 800 00 HBHI 800 00 80A (ShoreD HBHI 80C 55) 810 02T HB 820 02T HB 830 02T HB 820 02T HB 820 02T 80A 80A 80A 84A HBUV 80A 820 01 HBCC 80A 830 01 HBCC 80A 840 13 HB 84A Physical Specific Gravity D 792 0.92 0.93 0.97 1.05 1.15 1.05 1.04 1.05 1.12 1.10-1.15 Mould Shrinkage **** D 955 % 1.1-1.6a 1.1-1.5a 0.7-1.4a 0.6-1.5a 0.8-1.1a 0.6-1.3a 0.6-1.3a 0.4-0.9a 0.3-0.9a 0.3-0.7a - % - - 10 20 30 20 20 20 30 40 Tensile Strength at Yield D 638 MPa 15 22 29 31 32 23 16 75 85 65 Elongation at Break D 638 % >200 >200 35 30 25 45 >100 4 4 3 Flexural Strength D 790 MPa 16 33 41 47 52 37 35 100 110 90 Flexural Modulus D 790 MPa 600 1300 1900 2100 2400 2100 1800 3800 6000 3300 Notched Impact Strength IZOD D 256 J/m 250 125 45 40 30 90 250 115 150 125 UL 94 - HB HB HB HB HB HB HB HB HB HB D 648 °C 80 95 110 114 118 105 105 150 155 145 Reinforcement Mechanical Flame Retardancy** @1.6mm Thickness Thermal Heat Deflection Temperature, 0.45 MPa NOTE: *) Typical value only. Variation with tolerances are possible, in various colours and application. **) This rating is not intended to reflect hazards presented by this or any other material under actual fire. ****) For glass reinforced grades variations are possible depending on the glass fiber orientation. a - Shrinkage value are indicative and may not be considered for Design purpose. Given that shrinkage is affected by many factors, it is the user’s responsibility to verify the shrinkage for their own mold design and molding conditions All grades are available with heat stability, UV stability and customized colors. Value shown above are indicative only, and can vary by application process. Please consult us for additional specs if desired. LOXIM INDUSTRIES LIMITED, Plot No. 184-185/2, Sanand – Viramgam Highway, Iyava Village, Sanand 382110, Dist. Ahmedabad, INDIA. Tel.: +91-2717-308000 • Fax: +91-2717-308001 • [email protected] • www.loxim.com LOXIM Poly Butylene Teraphthalate (PBT) Test Method Typical Properties* ASTM Unit 200 00HB 20A 220 01HB 20A 230 01HB 20A 220 01V0 21I 220 01V0 21J 230 12V0 21F 230 01V0 21C 230 01V0 21J 230 01V0 24E 1.31 1.45 1.51 1.55 1.53 1.65 1.65 1.63 1.61 Physical Specific Gravity D 792 Mould Shrinkage **** D 955 % 1.5-2.4a 0.4-0.9a 0.3-0.8a 0.4-0.8a 0.4-0.8a 0.4-0.6a 0.4-0.6a 0.4-0.7a 0.3-0.8a - % - 20 30 20 20 30 30 30 30 Tensile Strength at Break D 638 MPa 55 90 120 85 115 85 90 130 120 Elongation at Break D 638 % 25 3 3 3 3 2 2 2 3 Flexural Strength D 790 MPa 80 150 190 155 165 165 175 210 190 Flexural Modulus D 790 MPa 2400 5500 8300 6000 7000 7000 7000 9500 8000 Notched Impact Strength IZOD D 256 J/m 45 55 100 60 65 75 50 60 85 UL 94 - HB HB HB V0 V0 V0 V0 V0 V0 D 648 °C 60 195 200 195 205 180 195 205 205 Reinforcement Mechanical Flame Retardancy** @1.6mm Thickness Thermal Heat Deflection Temperature, 1.8 MPa NOTE: *) Typical value only. Variation with tolerances are possible, in various colours and application. **) This rating is not intended to reflect hazards presented by this or any other material under actual fire. ****) For glass reinforced grades variations are possible depending on the glass fiber orientation. a - Shrinkage value are indicative and may not be considered for Design purpose. Given that shrinkage is affected by many factors, it is the user’s responsibility to verify the shrinkage for their own mold design a All grades are available with heat stability, UV stability and customized colors. Value shown above are indicative only, and can vary by application process. Please consult us for additional specs if desired. LOXIM INDUSTRIES LIMITED, Plot No. 184-185/2, Sanand – Viramgam Highway, Iyava Village, Sanand 382110, Dist. Ahmedabad, INDIA. Tel.: +91-2717-308000 • Fax: +91-2717-308001 • [email protected] • www.loxim.com
© Copyright 2024