1. No category

ESARS 2015
Preliminary Program
Regstration desk open Ren desk open
March 3rd, 2015
8:00
8:30 – 9:30
Venue opening
Opening session
9:30 – 10:30
Keynote session
KS.1
Session chair: Diego
Iannuzzi
10:30 – 11:00 Coffee break /
Welcome
Reception
11:00 – 12:40 Technical
sessions
12:40 – 14:00 Lunch
14:00 – 16:00 Workshops and
special sessions
16:00 – 16:20 Coffee break
16:20 - 18:00 Workshops and
special sessions
1.
2.
3.
1.
General Chair
Conference Manager
IEEE sponsor societies
Iqbal Hussein (North Carolina State
University): Electric Machines and Drives with
Wide Band Gap Semiconductors for More
Electric Transportation
2. Konrad Woronowicz (Bombardier): Smart
Urban Transit Systems - Everyone's Choice
1.
2.
3.
4.
TS1.1 Aircraft Electrical Applications
TS2.1 -Shipboard Electrical Applications
TS5.1 - Electrical Systems in Road Vehicles
SS1.1 - Recent railway vehicle traction
technologies
1. WS1.1 - Future of DC Electric Railways – part
1
2. WS1.2 - Toyota panel session: Onboard
Energy efficiency and managment - part 1
3. WS1.3 - Future perspective on real time and
hardware in the Loop simulation
4. TS2.2 - Shipboard Electrical Applications
1. WS2.1 - Future of DC Electric Railways – part
2
2. WS2.2 – Toyota panel session: Onboard
Energy efficiency and managment - part 2 –
Roundtable with invited companies
3. TS3.1 - Electrical Railway Traction Systems
4. SS1.2 - Modelling and Simulation of EPS for
MEA
March 4th, 2015
8:00
8:30 - 9:30
Venue opening
Keynote
session KS.2
Regstration desk open
Session chair:
Giuseppe Tomasso
9:30 – 10:00
ESARS2016
10:00 – 10:20
10:20 – 12:40
Coffee break
Technical
sessions
12:40 – 14:00
14:00 – 16:00
Lunch
Workshops
and special
session
sessions
16:00 – 16:20
16:20 – 18:20
Coffee break
Workshops
and special
session
sessions
20:00 – 22:30
Banquet
1. Joachim Taiber (Clemson University): How does
the Internet of Things change the way
transportation networks are being operated and
what opportunities does this generate for
electrified vehicles
2. Philippe Ladoux (University of Toulouse): Power
converters for reactive power compensation and
voltage balancing in railway substations
Official presentation of ESARS2016 edition
1.
2.
3.
4.
TS1.2- Aircraft Electrical Applications
TS2.3 -Shipboard Electrical Applications
TS3.2 - Electrical Railway Traction Systems
TS5.2 - Electrical Systems in Road Vehicles
1. WS2.1: Wireless charging - part 1
2. WS2.2: Energy Storage for transportation
systems
3. SS2.1 part1 – Advances in Control Analysis and
Modelling
4. SS2.2 part1 - High reliability equipment and
systems for more electric transport
1. WS2.1: Wireless charging - part 2
2. SS2.1 part2 – Advances in Control Analysis and
Modelling
3. SS2.2 part2 - High reliability equipment and
systems for more electric transport
4. SS2.3 - Maintenance strategies for Railway
Application
Regstration desk openpen
8:00
8:30 – 10:00
March 5th, 2015
Venue opening
Keynote session KS.3 1. Giuseppe Pagnano (CleanSky): Clean Sky
Session chair: Giorgio
Projects on the More Electric Aircraft
Sulligoi
2. T.B.D.
10:00 – 10:20
10:20 – 12:40
Coffee break
Technical and
Special Sessions
12:40 – 14:00
14:00 – 16:30
Lunch
Technical and
Special Sessions
1. TS1.3 - Aircraft Electrical Applications
2. TS2.4 - Shipboard Electrical Applications
3. SS3.1 part1 - Charging Technologies and
Energy Storage Systems for EV
4. SS3.2 - SiC applied power converter
technologies for rail vehicles
1. TS3.3 - Electrical Railway Traction
Systems
2. TS4.1 - Electrical Systems for Urban
Mobility
3. SS3.1 part2 - Charging Technologies and
Energy Storage Systems for EV
4. SS3.3 - Range extension for Electrical
Vehicles
March 3rd, 2015 - 10:20 – 12:40
TS1.1
Aircraft Electrical Applications
Chairman : Dr. Chris Gerada , Co-Chariman: Luca Papini
TS1.1.1
Comparative analysis of differential delta configured 18pulse atru
S. Khan, G. Zhaohui, H. Ali, K. Habib, I. U.
Haq
TS1.1.2
Iron loss calculation and 3-D thermal analysis of Halbach
array permanent magnet synchronous motor
S. Sadeghi, A. Hassanpour, K.
Sedghisigarchi
TS1.1.3
Study on the impedance characteristics of bunched wires
on aircraft
R. Ji, W. Liu, S. Liu, X. Zhang, Z. Gao, W. Li
TS1.1.4
Impedance characteristics study of three-phase aircraft
power wires
S. Liu, R. Ji, W. Liu, X. Zhang, Z. Gao, W. Li
TS1.1.5
Design of high power density converter for aircraft
applications
A. Nawawi, K. J. Tseng, R. Simanjorang, A.
Sakanova, C. F. Tong, C. J. Gajanayake, Y.
Liu, S. Yin, L. Yong, M. Kai, S. K. Yak, A. K.
Gupta
TS2.1
Shipboard Electrical Applications
TS2.1.1
Modeling and simulation of an lvdc shipboard power
system: voltage transients comparison with a standard
lvac solution
D. Bosich, M. Gibescu, N. Remijn, I.
Fazlagic, J. de Regt
TS2.1.2
Thermal modeling of a permanent magnet machine built
using litz wire
S. Nategh, S. Øvrebø, S. Mahdavi, O.
Wallmark
TS2.1.3
Medium voltage multilevel converters for ship electric
propulsion drives
K. Thantirige, A. K. Rathore, S. K. Panda,
G. Jayasignhe, M. A. Zagrodnik, A. K.
Gupta
TS2.1.4
Dynamic modeling of a supply vessel electrical grid for dp3 F. Silvestro, F. D’agostino, A. Fidigatti, E.
protection system
Ragaini
TS2.1.5
Effect of sudden change load on isolated electrical grid
M. Mirosevic, Z. Maljkovic
TS5.1
Electrical Systems in Road Vehicles
Chairman: Prof. Iqbal Hussein, Co-Chaiman: Prof. Diego Iannuzzi
TS5.1.1
TS5.1.2
TS5.1.3
Study on three-phase four-leg control technology of
permanent magnet synchronous motor in electric vehicle
Design and control of fault-tolerant non-isolated
multiphase multilevel dc–dc converters for automotive
power systems
Numerical modeling and simulation analysis of thermal
management system for a series-parallel hybrid electric
vehicle
H. Gao, X. Bai, W. Li, J. Shen
M. Gleissner, Mark-M. Bakran
C. M. Shao, X. X. Sun, G. Z. Wang, Y. S.
Yue, X. Li, L. N. Yang
TS5.1.4
A study of battery power for different electric vehicle
propulsion system
L. C. A. Silva, J. J. Eckert, F. M. Santiciolli,
E. S. Costa, F. G. Dedini, F. C. Corrêa
TS5.1.5
Design considerations for high performance traction
machines: aiming for the freedomcar 2020 targets
A. Walker, M. Galea, C. Gerada, A.
Mebarki, D. Gerada
SS1.1
Recent railway vehicle traction technologies
Chairman: Prof. K. Kondo, Co-Chairman: Prof. Masafumi Miyataka
SS1.1.1
The proposal of re-adhesion control method with the
advantage of individual control system
SS1.1.2
Propulsion system for catenary and storage battery hybrid
N. Shiraki, K. Tokito, R. Yokozutsumi
electric railcar series ev-e301
SS1.1.3
Study of practical energy-saving operation for electric
railway vehicle
S. Hiramatsu
SS1.1.4
Compensation of excessive angular momentum in a readhesion control of an electric train
T. Koseki, T. Hara
SS1.1.5
Rational sizing of onboard EDLC and placement of charging
N. Endo, M. Miyatake
facilities for a lrt system with intermittent power supply
O. Yamazaki
March 3rd, 2015 - 14:00 – 16:00
TS2.2
Shipboard Electrical Applications
TS2.2.1
Research of a new structure of HTS DC motor
C. Peng, K. Xiangling, W. Geng, L. Weili
TS2.2.2
Short-circuit protection in DC ship grids based on mmc
with full-bridge modules
V. Staudt, M. K. Jäger, A. Rothstein, A.
Steimel, D. Meyer, R. Bartelt, C. Heising
TS2.2.3
Multifunctional megawatt scale medium voltage DC test
bed based on modular multilevel converter (mmc)
technology
M. Steurer, F. Bogdan, M. Bosworth, O.
Faruque, J. Hauer, K. Schoder, M.
Sloderbeck, D. Soto, K. Sun, M.
Winkelnkemper, L. Schwager, P. Blaszczyk
TS2.2.4
Fault tolerant shipboard MVDC architectures
R. M. Cuzner, D. A. Esmaili
TS2.2.5
Small-signal impedance measurement in medium voltage
DC power systems
Z. Shen, M. Jaksic, I. Cvetkovic, R. Burgos,
D. Boroyevich
March 3rd, 2015 - 16:20 – 18:00
TS3.1
Electrical Railway Traction Systems
Chairman: Dr. Konrad Woronowicz , Co-Chairman: Prof. Takafumi Koseki
TS3.1.1
TS3.1.2
FEM analysis of a non-conventional axial flux hybrid
excitation motor under flux weakening operation for
electric vehicle purpose
A wye-delta multi-function balance transformer based
power quality control system for single-phase power
supply system
P. A., C. I. E.
S. Hu, Y. Li, Z. Zhang, B. Xie, M. Chen, A.
Kubis
TS3.1.3
Development of battery system for railway vehicle
T. Iwase, J. Kawamura, K. Tokai, M.
Kageyama
TS3.1.4
A method of calculating running resistance using
monitoring devices for energy simulators
S. Manabe
TS3.1.5
Influence of material electromagnetic properties on HTS
linear induction motor used in rail transit
D. Li, J. Li, W. Li, J. Cao, J. Fang, F. Huo, J.
Shen, H. Gao, W. Tang
SS1.2
Modelling and Simulation of EPS for MEA
Chairman: Dr. S. Bozhko, Co-Chairman: Dr. P. J. Norman
SS1.2.1
Optimization of parallelized power inverters using a direct A. M. Etayo, J. Bourdon, T. Meynard, H.
modelling approach for more electrical aircraft
Piquet, L. Prisse
SS1.2.2
Investigations into standards compliant paralleled
generation in civil aircraft
T. Kostakis, P. J. Norman, S. J. Galloway,
G. M. Burt
SS1.2.3
Functional modelling of multi-pulse asymmetric autotransformer rectifier units
T. Yang, S. Bozhko
SS1.2.4
Modeling and simulation of a switched reluctance
generator for aircraft power systems
H. Le-Huy
March 4th, 2015 - 10:20 – 12:40
TS1.2
Aircraft Electrical Applications
Chairman: M. V. Der Geest, Co-Chairman: Dr. S. Pugliese
TS1.2.1
Heatsink design for high power density converter in
aircraft applications: parameter sensitivity analysis
A. Sakanova, S. Yin, Y. Liu, K. Men, J. Zhao,
K. Y. See, K. J. Tseng, A. Nawawi, C. F.
Tong, Y. Liu, R. Simanjorang, C. J.
Gajanayake, A. K. Gupta
TS1.2.2
Fault diagnosis in power networks using hilbert transform
and fuzzy classifier
F. M. Rivera-Calle, L. I. Minchala-Ávila, J.
C. Montesdeoca-Contreras, J. A. MoralesGarcia
TS1.2.3
An advanced active rectifier based on the single-star
bridge cells modular multilevel cascade converter for
more-electric-aircrafts applications
R. A. Mastromauro, S. Pugliese, S. Stasi
TS1.2.4
Design and testing of a high-speed aerospace permanent
magnet starter/generator
M. V. Der Geest, H. Polinder, J. A.
Ferreira, D. Zeilstra
TS1.2.5
Advanced electrical systems to enable an all-electric
aircraft
A. Sharma, G. K. Capoor, A. B.
Chattopadhyay
TS1.2.6
An optimizing scheme for behavioral modeling of solidstate power controller
Yanjun. Dong, Daojie. Deng, Xiaobin.
Zhang
TS2.3
Shipboard Electrical Applications
TS2.3.1
Fuzzy logic vector control design for fault-tolerant control
of a 15-phase induction machine
Z. Liu, Z. Zheng, Y. Li, S. D. Sudhoff
TS2.3.3
Electric loads characterization in an aircraft carrier with
ring-bus distribution system
G. Lipardi, L. Piva, L. Piegari, E. Tironi, R.
Lamedica, A. Ruvio, G. Sulligoi, A.
Vicenzutti
TS2.3.4
Full electric ship propulsion based on a flying capacitor
converter and an induction motor drive
C. Reusser, H. Young
TS2.3.5
Application of backsteppping to MVDC ship power systems
M. Cupelli, M. Mirz, A. Monti
with constant power loads
TS2.3.6
Hardware in the loop implementation of linearizing state
feedback on MVDC ship systems and the significance of
longitudinal parameters
TS2.3.7
Handling System Harmonic Propagation in a Diesel-Electric
A. R. Ardal, E. Skjong, M. Molinas
Ship with an Active Filter
TS3.2
M. Cupelli, M. de Paz Carro, A. Monti
Electrical Railway Traction Systems
Chairman: Prof. Philippe Ladux, Co-Chairman: Dr. Christian Courtois
TS3.2.1
Development of a train running energy simulator for
commercial train running
T. Ogawa, S. Manabe, Y. Imamura, S.
Minobe, J. Kawamura, S. Hiramatsu, M.
Kageyama, N. Shimada
TS3.2.2
Damping control of induction motor traction system in
single-pulse mode of field weakening region
M. Yokoo, K. Kondo
TS3.2.3
A new generic problem formulation dedicated to
electrified railway systems
B. Desjouis, G. Remy, F. Ossart, C.
Marchand, J. Bigeon, E. Sourdille
TS3.2.4
Evolution and future of traction transformer on rolling
stocks
André-Philippe Chamaret, D. Frugier
TS3.2.5
Boost rectifier providing DC controlled voltage dedicated
to AC traction auxiliary supply application
W. Koczara, T. Bałkowiec
TS3.2.6
Distribution of stray current based on 3-dimensional earth
S. Jabbehdari, A. Mariscotti
model
TS3.3.6
Improved core shape of contacless transformer for lrt
system
TS5.2
J. V. Pinon Pereira Dias, M. Miyatake
Electrical Systems in Road Vehicles
Chairman: Prof. Joachim Taiber, Co-Chairman: Prof. Giuseppe Tomasso
TS5.2.1
Study on the brake resistor and energy consuming brake
process of hybrid electric vehicle
X. X. Sun, C. M. Shao, Y. F. Wu, D. Y. Yang,
N. F. Yang, Y. G. Li
TS5.2.2
Optimal energy management of a hybrid electric bus with
a battery-supercapacitor storage system using genetic
algorithm
V. Herrera, A. Saez-De-ibarra, A. Milo, H.
Gaztañaga, H. Camblong
TS5.2.3
Modelling and simulation of iwd vehicle
P. Simonik, T. Mrovec, J. Takac
TS5.2.4
Control of SiC –based dual active bridge in high power
three phase on-board charger of evs
S. Zeljkovic, R. Vuletic, A. Miller, A. Denais
TS5.2.5
Eddy-current loss analysis of copper-bar windings of ultra
high-speed PM motor
T.Noguchi, T. Komori
TS5.2.6
FPGA implementation of an adaptive modulation method
for a three-phase grid-tied PV chb inverter
M. Coppola, F. Di Napoli, P. Guerriero, A.
Dannier, D. Iannuzzi, S. Daliento, A. Del
Pizzo
March 4th, 2015 - 14:00 – 16:00
SS2.1
part1
Advances in Control Analysis and Modelling
Chairman: Dr. Serhiy Bozhko, Co-Chairman: Dr. Patrick Norman
SS2.1.1
Method for automatic assessment of electric motor
condition before its startup
N. Grebchenko, A.Kozhukhar
SS2.1.2
Dynamic behavior of a trolley traction system with a
flexible driving rope
J. Zhang, G. Abba
SS2.1.3
Hybrid modulated model predictive control for the more
electric aircraft generator system
S. S. Yeoh, T. Yang, L. Tarisciotti, S.
Bozhko, P. Zanchetta
SS2.1.4
Development of lft-based models for robust stability
analysis of a generic electrical power system over all
operating conditions
S. Sumsurooah, M. Odavic, S. Bozhko
SS2.2
part1
High reliability equipment and systems for more electric transport
Chairman: Dr. Chris Gerada, Co-Chairman: Dr. A. Kladas
SS2.2.1
State space model of a modular speed-drooped system for A. Galassini, A. Costabeber, G. Buticchi, D.
high reliability integrated modular motor drives
Barater, C. Gerada
SS2.2.2
A review on turn-turn short circuit fault
SS2.2.3
High efficiency shaft generator drive system design for ro- A. Sarigiannidis, A. Kladas, E.
ro trailer-passenger ship application
Chatzinikolaou, C. Patsios
SS2.2.4
Reliability analysis for a waste heat recovery power
electronic interface applied at all-electric aircrafts
P. Arumugam, T. Hamiti, C. Gerada
S. Saridakis, N. Papanikolaou, E.
Koutroulis, D. Voglitsis, E. Tatakis, G.
Christidis, I. Karatzaferis
March 4th, 2015 - 16:20 – 18:20
SS2.1
part2
Advances in Control Analysis and Modelling
Chairman: Dr. Serhiy Bozhko, Co-Chairman: Dr. Patrick Norman
SS2.1.5
Mta control for traction im drives: theory and
experimental results
S. Bozhko, S. Dymko, S. Kovbasa, S.
Peresada
SS2.1.6
Intelligent power regulation using innovative modules for
energy supervision
B. Guida, A. Cavallo
SS2.1.7
Performance analysis of wheel slip reset controller in
brake systems
E. Delgado, A. Barreiro, M. Díaz-Cacho, P.
Falcón
SS2.1.8
Analysis of the effects of gear trasmission structure on the
C. Musio, A. Damiano
electricvehicle performaces
SS2.2
part2
High reliability equipment and systems for more electric transport
Chairman: Dr. Chris Gerada, Co-Chairman: Dr. J. Prousalidis
SS2.2.5
Selection of slot-pole combination of permanent magnet
machines for aircraft actuation
J. Dusek, P. Arumugam, T. Hamiti, C.
Gerada
SS2.2.6
Contribution to a detailed modeling and more reliable
simulation of a ship’s shaft machine
I. Dermentzoglou
SS2.2.7
Power quality analysis for the highly-electric asset with DC T. Kourmpelis, D. Spathis, J. Prousalidis, S.
power distribution
Dallas, F. Kanellos, M. Korn
SS2.2.8
Variable DC-link voltage powertrain for electrified mobile
work machines
SS2.3
C. Pohlandt, M. Geimer
Maintenance strategies for Railway Application
Chairman: Prof. Mario Pagano, Co-Chairman: Dr. Lucio Fusco
SS2.3.1
Machine learning for wear forecasting of naval assets for
condition-based maintenance applications
A. Coraddu, L. Oneto, A. Ghio, S. Savio, M.
Figari, D. Anguita
SS2.3.2
Railway maintenance purpose and improvement
L. Bianco, L. Fusco
SS2.3.3
An approach to design a prognostic based maintenance
strategy for railway power converter unit
L. Fusco, M. Pagano
SS2.3.4
Deterministic vs heuristic algorithms for eco-driving
application in metro network
V. Calderaro, V. Galdi, G. Graber, A.
Piccolo
SS2.3.5
Use of formal languages to represent the ertms/etcs
system requirements specifications
A. Piccolo, F. Senesi, V. Galdi, R.
Malangone
March 5th, 2015 - 10:20 – 12:40
TS1.3
Aircraft Electrical Applications
Chairman: Dr. Patrick Norman, Co-Chairman: Dr. Giuseppe Pagnano
TS1.3.1
Review of power electronics opportunities to integrate in
the more electrical aircraft
J. Bourdon, P. Asfaux, A. M. Etayo
TS1.3.2
Automated stability assessment of more electric aircraft
electrical power systems
C. I. Hill, K. Areerak, T. Yang, S. Bozhko, M.
Odavic
TS1.3.3
SiC mosfet dual active bridge converter for harsh
environment applications in a more-electric-aircraft
R. A. Mastromauro, M. C. Poliseno, S.
Pugliese, F. Cupertino, S. Stasi
TS1.3.4
A direct drive solution for contra-rotating propellers in
electric unmanned aerial vehicle
G. Brando, A. Dannier, A. Del Pizzo, L. P.
Di Noia
TS1.3.5
Fault behaviour of a superconducting turboelectric
distributed propulsion aircraft network
K. M. Davies, P. J. Norman, C. E. Jones, S.
J. Galloway, G. M. Burt
TS1.3.6
Development of voltage standards for power system in a
turbo-electric distributed propulsion aircraft
A. Bollman, M. J. Armstrong, C. E. Jones,
Patrick. J. Norman, S. J. Galloway
TS1.3.7
A pre-design sensitivity analysis tool for consideration of
full-electric aircraft propulsion electrical power system
architectures
C. Jones, P. Norman, S. Galloway, G. Burt,
M. Armstrong, A. Bollman
TS2.4
Shipboard Electrical Applications
TS2.4.1
Efficiency optimization in bi-directional inductive power
transfer systems
TS2.4.2
Transient short circuit analysis in DC on-board distribution
systems fed by synchronous generators through 6-pulse
A. Vicenzutti, E. de Din, G. Sulligoi
diode rectifiers
TS2.4.3
Dependable oriented design of complex integrated power M. Chiandone, A. da Rin, R. Menis, G.
systems on ships
Sulligoi, A. Vicenzutti
TS2.4.4
Inland waterway gas-fuelled vessels: an innovative
proposal of a hybrid ship for the european network
V. Bucci, A. Marinò, D. Bosich, G. Sulligoi
TS2.4.5
An overview of innovative technologies onboard italian
navy ships for a more efficient electrical plant
T. Mazzuca, M. Torre, L. Piva
SS3.1
part1
F. Pellitteri, V. Boscaino, A. Di Tommaso,
R. Miceli
Charging Technologies and Energy Storage Systems for EV
Chairman: Dr. Federico Baronti, Co-Chairman: Dr. Ottorino veneri
SS3.1.1
Emerging energy storage solutions for transportation – a
review
S. Alahakoon
SS3.1.2
Sodium nickel chloride batteries in transportation
applications
R. Manzoni
SS3.1.3
Power quality conditioning system based on lithium-ion
ultracapacitors for electric vehicles quick charging station
S. Farnesi, A. Quadrelli, R. Gambuti, F.
Flamingo, G. Bosia, G. Gigliucci, E. Pasca
SS3.1.4
On/off-board 42v switch mode-based charger for
advanced vehicles
N. Ahmad, M. O. Abid
SS3.1.5
Combining energy with power: lithium-ion capacitors
J. Ronsmans, B. Lalande
SS3.2
SiC applied power converter technologies for rail vehicles
Chairman: Prof. Philippe Ladoux, Co-Chairman: Dr. Naoki Shiaki
SS3.2.1
Parallel connection of SiC mosfet modules for future use in
J. Fabre, P. Ladoux
traction converters
SS3.2.2
A new DC-DC converter with high voltage gain and low
voltage stress on power switches
SS3.2.3
Calculation of switching current stress in high voltage gain
E. Babaei, A. Mofidi, S. Laali
boost DC-DC converter
SS3.2.4
Verification tests of 3.3 kv SiC (silicon carbide) hybrid IGBT
S. Kadooka
inverter for nishi-nippon railroad co., ltd 3000 series
SS3.2.5
10kv SiC MOSFETs versus 6.5kv si-igbts for medium
frequency transformer application in railway traction
J. Casarin, P. Ladoux, B. Chauchat, V.
Escrouzailles, P. Lasserre
SS3.2.6
Research of efficient main power equipment using SiC
power device
M. Chiba, K. Kusano, N. Shiraki
SS3.2.7
A review of PWM voltage source converters based
industrial applications
A. Marzouki, M. Hamouda, F. Fnaiech
Y. Nabati, E. Babaei
March 5th, 2015 - 14:00 – 16:30
TS3.3
Electrical Railway Traction Systems
Chairman: Dr. F. Ponci, Co-Chairman: Dr. I. Szenasy
TS3.3.1
Analyses on heat transfer and fluid flowing state in
traction motor used in crh train
J. Cao, W. Li, Y. Zhang, X. Zhang
TS3.3.2
Influence of magnetic wedge on electromagnetic field
distribution of permanent magent traction motor
W. Li, Z. Cao, P. Cheng, D. Huang, D. Li, J.
Shen, W. Tang
TS3.3.3
Loss compensation by disturbance observer on energy
management controller for hybrid traction circuit
T. Saito, K. Kondo
TS3.3.4
Robust controller design of a distributed transport system
L. Celentano, D. Iannuzzi
TS3.3.5
Agent-based energy management in railways
S. Khayyam, H. Lakhdar, F. Ponci, A. Monti
TS3.3.7
Optimum control strategy for PMSM in field-weakening
region by constant power
I. Szenasy, Z. Szeli
TS4.1
Electrical Systems for Urban Mobility
Chairman: Dr. M. Kolhe, Co-Chairman: Dr. J. Kammermann
TS4.1.1
Performance evaluation of electric vehicle ventilation
using directly powered PV fans
T. Muneer, M. Kolhe, S. K. Adhikari, I.
Smith
TS4.1.2
Heterogeneous lte/wi-fi architecture for its traffic control
and infotainement
R. Daoud
TS4.1.3
Approach for comparative analysis of electric traction
machines
J. Kammermann, I. Bolvashenkov, HansGeorg Herzog
TS4.1.4
Grid circuit design using s.a.n.dy for a battery pack.
switching algorithm and cell dynamics (s.a.n.dy), a novel
approach for optimum discharging/charging of a lithiumpolymer battery pack for hybrid/electric vehicles
J. Mishra
SS3.1
part2
Charging Technologies and Energy Storage Systems for EV
Chairman: Dr. Ottorino Veneri, Co-Chairman: Dr. Giovanni Pede
SS3.1.6
Fabric’s approach towards the estimation of energy
storage system requirements for grid impact reduction
A. Amditis, T. Theodoropoulos, Y.
Damousis, J. Sallan, H. Bludszuweit
SS3.1.7
Flow batteries use potential in heavy vehicles
J. Campillo, N. Ghaviha, N. Zimmerman, E.
Dahlquist
SS3.1.8
Fast charge and local public transport: an italian
experience
A. Genovese, R. Geracitano, L.
Leoncavallo, G. Pede, R. Spazzoli
SS3.1.9
Experimentation with a zebra plus EDLC based hybrid
storage system for urban means of transport
C. Capasso, V. Sepe, O. Veneri, M.
Montanari, L. Poletti
SS3.3
Range extension for Electrical Vehicles
Chairman: Prof. C. Sourkounis, Co-Chairman: Prof. V. Staudt
SS3.3.1
Temperature influence on state-of-the-art electric
vehicles’ consumption based on fleet
P. Dost, P. Spichartz, C. Sourkounis
measurements
SS3.3.2
Evaluation of electric range demands of ev and erev on
the basis of field test data
P. Spichartz, P. Dost, C. Sourkounis
SS3.3.3
Dynamic wireless charging fed from railway grid: grid
connection concept
F. Turki, V. Staudt, A. Steimel
SS3.3.4
Design of interior permanent magnet synchronous
machine for two-drive-transmission
J. An, A. Binder
SS3.3.5
Dynamic wireless ev charging fed from railway grid:
magnetic topology comparison
F. Turki, V. Staudt, A. Steimel
SS3.3.6
Fuel cell range extender for battery electric vehicles
M. Walters, A. Kuhlmann, J. Ogrzewalla