1. No category

WMA
Architectural Wall Mount
LED
WMA & WMAUD SPECIFICATIONS
•• Housing – 20-gauge C.R.S. fixture channel. Front
housing constructed of marine grade extruded
aluminum with die-cast aluminum end caps.
•• Reflective Surfaces – 92% minimum average
reflective white polyester powder coat on interior
steel components.
•• Shielding – Frosted acrylic, .125” thick.
•• Finish – Textured matte white polyester TGIC
powder coat bonded to phosphate-free, multistage pretreated metal. All parts painted after
fabrication to facilitate installation, increase
efficiency, and inhibit corrosion.
WMA
EXAMPLE
-
4
-
LED*PH65/840
-
AF
-
OPTIONS
-
ED*PH
t
t
t
t
t
SERIES
NOMINAL
LED PACKAGE
SHIELDING
OPTIONS
LENGTH
•• LED Module – Philips Fortimo LED light engine.
•• LED Driver – Constant current, Class 2 driver.
Philips and Lutron drivers available.See page 699
for complete driver listing.
•• Mounting – Wall.
•• Labels – cETLus conforms to UL STD 1598 and UL
STD 8750. Certified to CAN/CSA STD C22.2 No.
250.0. Suitable for damp locations.
•• Warranty – 5-year limited fixture warranty, see
www.hewilliams.com.
•• This fixture is proudly made in the USA.
-
UNV
t
t
DRIVER
VOLTAGE
ORDERING INFORMATION
SERIES
OPTIONS (Continued)
WMA
TP 1 Architectural Wall Mount – LED
Tamper-resistant (holt head)
screws 1
EM/BSL310
Emergency LED driver (4’ only,
nominal 1300 lumens module
output in EM mode)
LVC*C60 2 , 3 Curbell low-voltage controller
(Curbell model #LC-060),
120V or 277V only 2 , 3
AMW
Anti-microbial white finish
OCCUPANCY SENSORS 3
Factory-installed occupancy sensor, 120V or 277V
only, must specify voltage:
OCCWS FS-505-PP-___ 3
NOMINAL LENGTH
2
3
4
2’
3’
4’
LED PACKAGE
EXAMPLE: LED*PH65/840
FIXTURE
LENGTH
LUMEN
PACKAGE
MAXIMUM MINIMUM CRI & CCT
LUMENS
2’
LED*PH30/
3,000
3’
LED*PH46/
4,600
4’
LED*PH65/
6,500
830 = 80 CRI, 3000K
835 = 80 CRI, 3500K
840 = 80 CRI, 4000K
Maximum lumens shown for each fixture length.
Lower lumen packages available, consult factory.
SHIELDING
AF
DRIVER
Philips and Lutron drivers available. See page 699
for complete driver listing.
VOLTAGE
120
277
UNV
Frosted acrylic, .125” thick
OPTIONS
5-3/4”
6-1/2”
FOOTCANDLE ESTIMATOR
WMA-4LED*PH65/840-AF
34
66
67
34
669
35
60
25
60
35
17
35
35
21
12
25
17
21
14
14
9
10
12
10
9
See page 243 for color options.
PSR/120
Single-circuit pull switch on
right (120V only)
PSL/120
Single-circuit pull switch on left
(120V only)
GCOL
Grounded convenience outlet
on left (120V only)
GCOR
Grounded convenience outlet
on right (120V only)
CT
Closed-top (affects maximum
lumen output and distribution;
maximum 3,200 lumens)
1
2
3
This option requires a tamper-resistant tool (must be
ordered separately). Please specify quantity required per
project.
LVC*C60 option requires 120V or 277V. Not dimming
compatible.
LVC and OCC options cannot be used simultaneously on 2’
and 3’ units.
Footcandle calculations based
on standard reflectance of
80/50/20 and a light loss
factor of 1.0.
Fixtures installed at 7’
mounting height in 12’ x 12’
room with 10’-0” ceiling.
Values shown are at 36” work
surface height.
| Wall Wash & Wall Mount
LGV41499.070814JJ
120V
277V
120-277V
Information contained herein is subject to change without notice.