PRODUCT GUIDE MULTI-POSITION AIR HANDLING UNIT PVFY-P**NAMU Product Overview PVFY multi-position air handlers can be connected to a system with other CITY MULTI indoor units for complete system design flexibility. The multi-position design is suitable for any application, requiring no additional kits even for down-flow configuration, making it ideal for installation in a closet, attic, or an equipment room. Designed and engineered in the United States, the PVFY offers quiet operation with a variable speed, highly efficient DC motor featuring a forward curved blower, allowing constant personalized comfort at three different fan speeds. Features ▶▶ Multi-position capabilities allow for installation in vertical, horizontal left, or horizontal right positions with no additional kit requirements, even for down-flow configuration ▶▶ Selectable external static pressure up to 0.80 ▶▶ Reusable standard-size 1” filter ▶▶ Side return available (P12-P24 only) ▶▶ Unique cabinet insulation design allows for no thermal penetration into the coil section. ▶▶ Cabinet can be fully disassembled for easy maintenance or to fit in extra-tight spaces. ▶▶ Heavy gauge, high-gloss powder coat finish steel cabinets with 1” fiberglass-free foam insulation (R-4.2 insulation value) ▶▶ Environmentally friendly, RoHS compliant, fiberglass-free cabinet construction ▶▶ Control board includes condensate overflow switch connection ▶▶ Accessories available for various custom applications, including two-stage auxiliary heat, fan speed indication, humidifier control, and more ▶▶ Cabinet sections are embossed with fan, coil, and other components for easy identification and maintenance Form No. PLG_PVFY_Multi-Position_03.15 I Printed In The U.S.A © 2015 Mitsubishi Electric US, Inc. PRODUCT GUIDE MULTI-POSITION AIR HANDLING UNIT PVFY-P**NAMU PVFYP12NAMU-E Model Name PVFYP18NAMU-E PVFYP24NAMU-E PVFYP30NAMU-E Power Source PVFYP36NAMU-E PVFYP48NAMU-E PVFYP54NAMU-E 208/230V, 1-phase, 60Hz Cooling Capacity Btu/h *1 12,000 18,000 24,000 30,000 36,000 48,000 54,000 Heating Capacity Btu/h *1 13,500 20,000 27,000 34,000 40,000 54,000 60,000 External Finish Dimensions Net Weight Galvanized steel cabinet-Powder coated Slate Gray Height Inches 50-1/4 54-1/4 59-1/2 Width Inches 17 21 25 Depth Inches Unit Pounds 141 172 21-5/8 113 Heat Exchanger Cross fin (Aluminum fin and copper tube) Type x Qty. Fan Sirocco fan x 1 Airflow Rate *2 CFM 280 - 340 - 400 External Static Pressure In. W.G. 410 - 497 - 585 515 - 625 - 735 613 - 744 - 875 767 - 931 - 1,095 980 - 1,190 1,400 1,040 - 1,262 1,485 0.30 - 0.50 - 0.80 (selectable) Motor Type DC motor Filter Polypropylene Honeycomb Refrigerant Pipe Dimensions Low Pressure (Brazed) Inches 1/4 1/4 3/8 3/8 3/8 3/8 3/8 High Pressure (Brazed) Inches 1/2 1/2 5/8 5/8 5/8 5/8 5/8 35-39-43 35-39-43 36-40-44 Drain Pipe Dimension Inches Sound Pressure Level (As Measured in an Anechoic Room) *2 dB(A) 3/4 FPT 27-31-35 28-32-36 30-34-38 32-36-40 Notes: *1 Cooling/Heating capacity indicates the maximum value at operation under the following conditions: Cooling | Indoor: 80º F (27º C) DB / 67º F (19º C) WB; Outdoor: 95º F (35º C) DB Heating | Indoor: 70º F (21º C) DB; Outdoor: 47º F (8º C) DB / 43º F (6º C) WB *2 Airflow rate/sound levels are at (Lo-Mid-Hi) Specifications are subject to change without notice. Mitsubishi Electric Cooling & Heating 1340 Satellite Boulevard, Suwanee, GA 30024 Phone: 800-433-4822 Fax: 800-889-9904 /mehvac /mitsubishihvac /mitsubishihvac Mitsubishi Electric and the three diamond logo are registered trademarks of Mitsubishi Electric Corporation. See complete warranty for terms, conditions and limitations. A copy is available from Mitsubishi Electric. Use of the AHRI Certified™ mark indicates a manufacturer’s participation in the certification program. For verification of certification for individual products, go to www.ahridirectory.org. Form No. PLG_PVFY_Multi-Position_03.15 For more information visit www.mehvac.com I Printed In The U.S.A Please Recycle © 2015 Mitsubishi Electric US, Inc.
© Copyright 2024