...And Back Again

PORTABLE ROADWAY SYSTEMS
2014 Product Catalog
Helping You Go The Distance
PORTABLE ROADWAY SYSTEMS
...And Back Again
MUD-TRAKS®
TrakMat®
Shor-Mat
For over 20 years, the utility, construction,
drilling and landscape industries have
relied on the innovative products of
SVE Portable Roadway Systems. With
easy handling, unprecedented strength
and unmatched value, we have set the
standard for mat and shoring
systems in the United States
and around the world.
Outrigger Pads • Crane Pads • Ditch Bridge • emtek® Mats
MUD-TRAKS® Portable Roadway System
TRAKMAT® Ground Cover Mat Systems
Whether on mud, sand or swamp, MUD-TRAKS will take
you and your equipment where polyethylene mats and
plywood can’t. Designed with a solid fiberglass grid
structure that channels tire load throughout the mat,
MUD-TRAKS sets the industry standard for elite, portable
roadway systems.
When you need to move large work vehicles without
damaging a lawn or driveway, TRAKMAT is the solution.
These mats can also prevent vehicles from getting
stuck in muddy and wet conditions. Made from highperformance polymers, TRAKMAT does not rot or break
like plywood. The standard mat is a light color so it will
not damage grass in summer heat. These mats are not
affected by weather or insects.
MUD-TRAKS provide maximum flotation. If the ground
supports a man walking, MUD-TRAKS will take your
equipment to the site.
Features:
Textured on both sides for traction
Can be easily handled by men in the field
■ Fits in the back of a pickup truck
■ Provides maximum load spread for the lowest psi
of any mat on the market
■ Not affected by water, gas, oil or chemicals
■ No splintering and rotting like plywood
■ Flexibility prevents breaking under extreme loads
■ Full-size panels spread tire load over almost
30 sq. ft. of solid footprint
■ Pound for pound, MUD-TRAKS are stronger
than wood, steel or plastic
Advantages:
■
Power cylinder surface provides maximum
mat-to-ground and mat-to-tire traction
■
Will not break, even with extreme loads of 60 tons
■
Manufactured with traction on both sides, or they
can be smooth on one side
■
Smooth-sided mats are used to drive over sidewalks,
asphalt driveways or anywhere you need to protect
a surface
■
Hand cutouts are in all models, four in the full size
and two in the small sizes
■
Connector holes are on the corners and sides
■
Multiple sizes available
■
■
LAWN MATS Vehicle Weight (up to 35,000 lbs)
Model
Size
Weight
Model N2296HD
22" x 8' x 5/16"
28 lbs
Model N3296HD
32" x 8' x 5/16"
40 lbs
Model N4596HD
45" x 8' x 5/16"
60 lbs
OFF-ROAD SUPER LITE MATS Vehicle Weight (under 60,000 lbs)
Model
Size
Weight
Model N4572HDSL
45" x 6' x 3/8"
60 lbs
Model N4596HDSL
45" x 8' x 3/8"
75 lbs
OFF-ROAD SUPER MATS Vehicle Weight (up to 100,000+ lbs)
Model
Size
Weight
Model N3272HDS
32" x 6' x 0.40"
42 lbs
Model N4572HDS
45" x 6' x 0.40"
72 lbs
Model N4596HDS
45" x 8' x 0.40"
92 lbs
Lawn Mats are
recommended for
cemeteries, landscaping,
pump service, golf
courses, and crossing
sand and grass fields
Off-Road Super Lite Mats
are recommended for
utilities, off-road utility
access, rental companies,
light cranes and special
events
Off-Road Super Mats
are recommended for
transmission line crews,
well drillers, cranes and
house movers
Available to buy or rent. To learn more, contact us at 800-762-8267.
800-762-8267
Model
Size
Weight
TM4496
44.5" x 8' (1.13 x 2.44m)
78 lbs (35 kg)
TM3696
36" x 8' (0.90 x 2.44m)
64 lbs (29 kg)
TM3672
36" x 6' (.090 x 1.83m)
51 lbs (23 kg)
TM2296
22.2" x 8' (0.56 x 2.44m)
39 lbs (18 kg)
TM2248
22.2" x 4' (0.56 x 1.22m)
19 lbs ( 9 kg)
Dirtboard
48" x 8' x 3/8" (1.22 x 2.44m)
60 lbs (27 kg)
Available to buy or rent. To learn more, contact us at 800-762-8267.
SVEPortableRoadwaySystems.com
Strong ■ Light ■ Fast
SHOR-MAT
emtek® Heavy Equipment Mats
With its longevity, easy handling and superior strength,
Shor-mat is a game changer in the shoring world.
Projects are completed with ease and without plywood
shoring. Shor-mat shatters the status quo and delivers a
new standard for shoring accessories.
Engineered laminated wood emtek mats are half the
weight of a comparable solid sawn wood mat. They
enable heavy equipment to operate in unstable or soft
soil conditions, providing safety for your workers and
equipment.
Features:
Features:
■ Warrantied
for 6 years
■ Life expectancy:10-15 years
■ Not affected by hot or cold temperatures
■ Does not absorb water
■ Easy lifting with hand cutouts on four sides
■ Simple to use with lifting strap
■ Structural properties exceed industry standards
■ Satisfies OSHA excavation standards
(Subpart P requirements)
■ Can handle 10,000 lb tire loads
■ Made from high-performance polymers with
embedded grids
Shore Sheeting
Size: 4' x 8' x 5/8"
100 lbs
■ Matte finish on both sides
■
■ Weight:
Dual-Use Mat
■ Use
for shoring or as portable roadway
44.5" x 8' x 5/8"
■ Weight: 95 lbs
■ Traction surface both sides or matte finish on one side
■ Size:
We can customize SHOR-MAT with your corporate
colors, logo, phone number and website.
■ Made
from 100% hardwood species
■ Mat
sizes can range from 3 ½" to 12 ½" thick,
from 4' to 8' wide, in length from 12' to 24',
with special lengths up to 75'
■ Selective
cutting and treatment eliminate
or distribute natural defects
Available sizes include:
to provide reliable strength
and superior performance
Nominal
Model
Weight
■ Patented construction
process creates a work
678 lbs
3 ½" x 4' x 16'
platform with engineering
design values that exceed
890 lbs
4 ½" x 4' x 16'
those of sawn wood mats
1,080 lbs
5 ½" x 4' x 16'
■ Every emtek module is
1,290 lbs
6 ½" x 4' x 16'
tested at the factory
before shipment
1,482 lbs
7 ½" x 4' x 16'
Custom sizes available
Model
Nominal
Weight
3 ½" x 8' x 16'
1,380 lbs
4 ½" x 8' x 16'
1,818 lbs
5 ½" x 8' x 16'
2,222 lbs
6 ½" x 8' x 16'
2,670 lbs
7 ½" x 8' x 16'
3,077 lbs
Super Crib
Super Crib creates a safe platform to lift or stabilize a
line truck. They can be set directly on the ground if the
soil underneath is stable enough to support the load.
(Field personnel must make that determination.) We
recommend the use of a rigid panel to be used under
the cribbing as a support base to carry the load in any
soft ground situation.
Features:
■
■
■
■
■
■
Shore sheeting has
smooth surface
Dual-use mat has
traction surface
Patent Pending
■
■
■
To learn more, contact us at 800-762-8267 or go to SHOR-MAT.com.
800-762-8267
Nonabsorbent
Unbelievable stability
Stronger, cleaner and safer than wood
Will not split
Aggressively patterned
S lip-resistant pyramid-locking and interlocking
Lincoln Log surface
Use to build super stable box crib
Rope handle at both ends
Standard size: 6" x 7" x 2'
To learn more, contact us at 800-762-8267.
SVEPortableRoadwaySystems.com
TRAKPAD Outrigger/Crane Pads
TRAKPADs are made from ultrahigh-molecular weight
polyethylene (UHMW). They have extremely long
molecular chains, numbering in the millions. The longer
chain transfers load more effectively. This results in a
very tough material with the highest impact strength of
any thermoplastic presently made. It is highly resistant
to corrosive chemicals, has extremely low moisture
absorption and is highly resistant to abrasion (15 times
more resistant to abrasion than carbon steel).
Features:
■
■
■
■
■
■
■
■
■
■
■
■
Model
Chemical and oil resistant
Advanced material and fabrication
Virtually unbreakable
Form recall after bending
Non-marking and nonabrasive
Doesn’t chip, peel, crack, delaminate or rot
Impervious to insects
Simple to install and requires virtually no maintenance
Unlimited lifetime warranty
Ergonomic and environmentally friendly
Easy to clean
Hand cutouts for field handling
Load Capacity
Size
Weight
30,000 lbs
18" x 18" x 1"
11 lbs
60,000 lbs
35,000 lbs
24" x 24" x 1"
20 lbs
2424TP-2
62,000 lbs
40,000 lbs
24" x 24" x 2"
38 lbs
3030TP-1
81,000 lbs
41,000 lbs
30" x 30" x 1"
31 lbs
3030TP-2
85,000 lbs
43,000 lbs
30" x 30" x 2"
62 lbs
Vertical
45 Angle
1818TP-1
55,000 lbs
2424TP-1
Features:
Lighter than wood
break, take up space, absorb water or rot
■ N
onskid surface provides superior traction
■
■ W
on’t
Custom sizes available
Model
Size
Usage
Weight
Miscellaneous
2424HDS
24" Square
Everyday use
12 lbs
Equipment under 25,000 lbs
3232HDS
32" Square
Everyday use
30 lbs
Equipment under 25,000 lbs
1818
18" Square
Normal field use
12 lbs
Equipment up to 35,000 lbs
2424
24" Square
Rough field use
20 lbs
Most popular line of truck pads
3232
32" Square
Demanding field use
38 lbs
Tandem equipment up to 70,000 lbs
4545
45" Square
Demanding field use
73 lbs
Cranes and tri-axle equipment
Dozer Mats
Stop road damage caused by bulldozers or other types
of steel track vehicles with sturdy, environmentally
conscious Dozer Mats. These mats prevent damage caused
by steel treads crossing roadways, concrete shop floors
and driveways. They work great in cemeteries under front
buckets to prevent damage to turf or markers. Unlike with
old tires or plywood, traffic can drive over Dozer Mats at
speed without damage, and the mats won’t move.
Features:
Hand cutouts on both ends make them easy to handle
■ Dozer Mats are lightweight and portable
■ Use under any size track vehicle
■ Dozer Mats are 2" wide x 8' long and weigh 56 lbs
Sandmats
Highly visible yellow rails available
To learn more, contact us at 800-762-8267.
800-762-8267
Outrigger and Crane Pads provide a safer, more stable
rig because they have a bigger footprint than cribbing
blocks. These lightweight, durable pads are made of
composite fiberglass so they do not need to be as thick
as pads made from wood or plastic.
■
Multiple Sizes Available
Applications include arborists’
equipment, concrete pumps, cranes,
vacuum trucks, drilling rigs, septic
pumpers/cleaners, utility trucks and
any type of aerial equipment.
PORTABLE ROADWAY SYSTEMS
Composite Fiberglass Outrigger Pads/
Crane Pads
These mats aren’t just for sand. Sandmats were also
designed to deliver traction and momentum in dirt, mud,
ice and snow. Constructed of high-density polyethylene,
with a very aggressive traction pattern, sandmats will
bend but will not break.
Size:12" x 48" x 1/2"
To learn more, contact us at 800-762-8267.
SVEPortableRoadwaySystems.com
Trench Cover
■
■
■
■
■
Made from composite fiberglass
Light enough to be moved by two people
Strong enough to support pedestrian traffic
Not affected by wet, cold, hot or dry weather
Not to be used for public street vehicle traffic
Size
Weight
4' x 8' x ½"
62 lbs
4' x 9' x ½"
70 lbs
5' x 10' x ½"
95 lbs
Custom sizes available
Cable Ramps
This tough cable and pedestrian protection system
pays for itself. Place the ramp where you want
to lay the cable (even on rough or mildly sloped
surfaces). Cables lay flat in up to five channels
and with no kinking. Bright yellow cover adds
high visibility. Ramps are easy to set up, tear
down and store.
Ditch Bridge
Ditch Bridges are engineered to do the job safely,
unlike high-risk, field-fabricated bridging. This
is the fast, safe way to cross ditches, creeks and
trenches. You can lift them in place with the trucks
you are using. No special equipment is needed.
Features:
■
All aluminum construction (no rust)
material for high strength and
light weight
No painting ever required
odels with lower side rails allow clearance for
M
almost any vehicle
Standard models from 12' to 24' long
or vehicle weights up to 65,000 lbs
F
(custom models available for heavier vehicles)
■ A
ircraft-grade
■
■
PORTABLE ROADWAY SYSTEMS
PORTABLE ROADWAY SYSTEMS
■
■
To learn more or to place an order, contact us at 800-762-8267.
6128-F Brookshire Blvd.
Charlotte, NC 28216
SVEPortableRoadwaySystems.com