FILTRATION EQUIPMENT
Solutions for Oil & Gas,
Process, Pharmaceutical,
Beverage, Water & Wastewater
Filter Cartridges
Depth Filter Cartridges
acuraMultiflow: Melt blown 100%
Polypropylene filter cartridge. Cost effective
option for most non critical applications.
Excellent cartridge for general clarification
applications.
acuraPromelt: High efficiency
graded density filter
cartridge. High
contaminant holding
capacity with low
pressure drop and
long service life. Up
to 99.9% removal of
particles at the rated pore size.
SW Series Wound: Polypropylene, Cotton &
Glass Fibre wound cartridge on Polypropylene
core or SS core for high temperature
applications. Cost effective particulate or high
temperature filtration.
Pleated Filter
Cartridges
Pleat2: WRAS approved
nominal rated Polyester
filter cartridge.
Manufactured
from single sheet
technology,
these cartridges
provide large
surface area
and high flow
rates. Available
in standard and Big
Blue size.
acuraProflow: High
efficiency pleated
Polypropylene
media. Thermal
welding technology
eliminates adhesives
and binders.
2
Siga Filtration Products
High Flow Filter
Cartridges
PHF Series High Flow: Designed to
retrofit Parker High Flow Housings.
Significant cost saving at no loss of
performance.
UHF Series High Flow: Designed to
retrofit cartridges by Pall. Suitable
for high flow rate applications.
Manufactured in FDA compliant
materials in absolute rated
Polypropylene and Glass fibre.
Polyethersulfone
Cartridges & PES
Capsules
acuraFine AFS-ST Cartridge:
Polyethersulfone
membrane filter
cartridge with
solid PP cage.
FDA compliant
materials. Suitable
for food, beverage & pharmaceutical
applications.
ENS RinseCap PES Capsule:
0.2 micron absolute medical
grade PES capsule. Ideal
for endoscopy filtration
washers.
Filter Bags
PP, Polyester &
Nylon Filter Bags
acuraBag: Polypropylene,
Nylon & Polyester filter bags.
Quality bags with excellent
dirt holding capacity and
checmical compatibility to suit
a wide range of applications.
Available in all industry standard
bag lengths.
BP Series Bag for Pentek PBH
Housing: Mini filter bags for
Pentek PBH bag filter housings.
Available in Polypropylene and
Nylon material.
Cartridge Filter
Housings
Single Cartridge Filter
Housings (PED
Compliant)
1FU Series:
Screwed closure
for a secure fit.
Suitable for DOE or
222/flat/spear end cap styles.
Max. Operating 25 bar at 80 °C. Optional DP Gauge. Available
in 304 or 316SS material.
1 FUC Series: Quick release clamp. Suitable for DOE or 222/
flat/spear end cap styles. Max. Operating 25 bar at 80 °C.
Optional DP Gauge. Available in 304 & 316 SS.
1 FUCB Series: Quick release clamp.
Suitable for 226/spear end cap
styles. Max. Operating
25 bar at 80 °C.
Optional DP
Gauge. Available in
316 SS only.
Multi Cartridge Filter Housings
(PED Compliant)
FWK Series: Side inlet/outlet. Hinged lid with eye bolts.
Suitable for DOE or 222/flat/spear end cap styles. Max.
operating 10 bar at 80 °C. Adjustable legs (316SS option).
Fixed legs (304SS) Available in 304 & 316SS.
Optional DP Gauge.
FWC Series: Side inlet/outlet. Quick release clamp. Suitable
for DOE or 222/flat/spear
end cap styles. Max.
operating 10 bar at
80 °C. Fixed legs.
Available in
304SS.
Siga Filtration Products
3
Bag Filter Housings
Bag Filter
Housings (PED
Compliant)
ALSI Series: Suitable for
size 3 (4” x 9”) or size 4
(4” x 14”) filter bags. Side in
bottom out. Quick release
clamp. Optional stand. Max.
operating 10 bar at 80 °C.
Available in 304SS.
BFOS Series: Suitable for size
1 (7” x 16.5”) & size 2 (7” x 32”) filter bags. Hinged lid with
eye bolts. Max. operating 10 bar at 80 °C. Adjustable legs.
Optional DP gauge. Available in 304SS.
Duplex Bag Filter
Units: Twin bag
units welded or
flanged together.
Cost effective
solution for high flow
rate applications.
Available in duty/
duty & duty/standby
configurations. Max.
operating 10 bar at
80 °C. Adjustable
legs. Available in
304SS. Optional DP
gauge.
4
Siga Filtration Products
Multi Bag Filter
Housings: 4 or
6 bag housing
for size 2 (7” x
32”) bags. Spring
assisted hinged
cover lifting
mechanism with
eye bolts. Max.
operating 10 bar
at 80 °C. Fixed
legs. Available
in 304 or 316SS
material.
Pentek PBH Series: Pentek Bag
Filter housing kit complete with
filter housing, basket, spanner,
gauge & drain.
Special Designs
Process and site requirements
can vary from site to site and
it is not always convenient to
modify your pipe work to suit
standard filter housings. Physical
constraints like on site space
restrictions, height, position
and connection type of your
inlet/outlet pipe work, process
parameter requirements etc.
can make it very difficult to work
with the standard off the shelf
designs. This can create extra work
for operator, increase equipment
down time and affect performance of filtration
systems.
At Siga Filtration we have identified this
problem and can work with the
customer to supply custom
built filtration systems to meet
your specific application
and site requirements.
Filter Housings can
be built to order
based on your
design, drawings and
instructions.
Water Treatment
Cartridges
Chlorine &
Chloramine
Reduction
Pentair GAC Carbon:
Granular activated carbon
cartridge by Pentek,
available carbon only,
silver impregnated or with
phosphate crystals as an
option. Also available for Big
Blue Housings.
Pentair EPM/EP Carbon
Block: Economical Carbon Block
with built in pre filtration layer.
EP is a high efficiency version
offering 100% greater removal
efficiency. Also available for Big
Blue housings.
870 Carbon ECB/SCB/
PCB Carbon Block: Entry
level Carbon block for
general applications. SCB
grade is WRAS approved
and high efficiency version.
PCB is specially designed
for Chloramine removal.
Also available for Big Blue
Housings.
Oil Removal
OilOut-99: Specially designed for
removal/reduction of dissolved and
dispersed hydrocarbons from water
by absorbing nearly three times their
own weight. No hydrocarbons are
released once the cartridge
has exhausted. Each
pass removes up to 99%
of hydrocarbons with
a capacity of 360g in
standards 10” and 1290g in
large diameter.
Siga Filtration Products
5
Applications
Siga Filtration’s expertise in filtration & separation allows us to offer reliable products for a wide range of industrial applications.
An extensive product line combined with industry knowledge means that our customers can rely on us for cost-effective, custom
solutions specific to their requirements.
Water & Wastewater
■
■
■
■
■
■
■
■
Sediment removal
Sterile water production
Chlorine removal
UV Pre filtration
Cryptosporidium removal
Iron & Manganese removal
Oil reduction
Chloramine removal
Beverage
■
■
■
■
■
■
■
■
■
Particulate removal
Microbial protection
Carbon Dioxide filtration
Vent filtration
Steam filtration
Water purification
Haze reduction
Guard filtration
Bottle washing
Chemical Processing
■
■
■
■
■
■
■
6
Solvent filtration
Boiler water
Pump protection
High purity chemicals
Inks, paints & coatings
Catalyst removal
Product transfer and loading
Siga Filtration Products
Pharmaceutical
■ Solvent filtration
■ Steam filtration for sterilisation &
sanitation
■ Water for injection (WFI)
■ Sterile filtration of air to fermenter
■ Sterile Nitrogen filtration
■ Tank vent filtration
■ DI water
■ Sterile aeration and de-aeration
■ Sterile filtration of water for cleaning
ampoules/vials
Oil & Gas / Refining /
Gas Processing
■ Rich/Lean Amine stream filtration
■ Sour water
■ Stripped water
■ Boiler water
■ Nozzle protection
■ Injection water
■ Produced water
■Glycol
■ Natural gas
Biodiesel
■
■
■
■
Feedstock filtration
Refined oil
Glycerin filtration
Biodiesel purification
Siga Filtration Products
7
Siga Filtration based in Surrey, United Kingdom, offers filtration and
separation solutions for wide range of industry sectors, supporting
its global customer base. We use our in depth knowledge to
offer accurate and reliable solutions which result in reduced
expenditures & operational costs, improved output and reliability
for our customers. Whether the application is in a chemical plant,
refinery, Oil & Gas exploration or manufacturing environment,
Siga Filtration’s line of filters can handle all types of rigorous and
general purpose applications.
Contact us
Siga Filtration (A Division of Siga UK Limited)
Unit 007 Basepoint Business Centre
377 – 399 London Road
Camberley
Surrey
GU15 3HL
United Kingdom
Tel: +44 (0) 1276 415 761
Fax: +44 (0) 1276 415 762
Email us at [email protected]
Or visit us online at www.sigafiltration.co.uk
Siga Filtration Logo is a trademark and service mark of Siga UK Limited. All other marks are properties of their respective owners.
The contents of this publication are presented for information purposes only, and while every effort has been made to ensure their
accuracy, they are not to be used as warranties or guarantees, expressed or implied, regarding the products and services described herein or their
use or applicability. Siga UK Ltd will not be liable for any loss or damage arising from the use of the Product(s), whether direct, indirect, special, incidental, or
consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. All sales are governed by our terms and conditions a
copy of which is available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice.