1
PREFACE
Dear Hyundain,
We welcome you to the Hyundai Family. Thank you for choosing the
Hyundai Sonata and we assure years of driving pleasure.
Enjoy your Hyundai Sonata by going through this guide. It will help you
learn how to operate your car, from the driving / instrument controls and
functions to all other convenient features.
This quick reference guide will help you keep your car trouble-free thus
preserving your investment.
For any kind of maintenance query or assistance, please feel free to
contact your Hyundai dealer. We will be happy to help.
Happy Motoring!
2 INSTRUMENT
PANEL & OTHER CONTROLS
14
9
15
11
12
1.
2.
3.
4.
5.
6.
7.
8.
9.
Instrument cluster
Light control / turn signals
Steering wheel audio controls
Horn
Driver’s side front air bag*
Wiper/Washer
Engine start/stop button*
Hazard warning flasher switch
The climate control system
3
1
6
2
4
3
8
8
5
10
13
10. Gear shift lever
11. Power outlet*
12. AUX, USB, iPod
13. Cigarette lighter*
14. Passenger’s side front air bag*
15. Glovebox
*: if equipped
7
4
VEHICLE IDENTIFICATION NUMBER
A Vehicle Identification Number or Chassis Number,
commonly abbreviated to VIN, is a unique serial
number used by the automotive industry to identify
individual motor vehicles. VIN is used in registering
your car and in all legal matters pertaining to its
ownership, etc.
The number is punched on the floor under the front of
driver’s seat.
ENGINE NUMBER
Every vehicle engine is marked with an engine number
by the factory. The engine number includes coded
information, such as year of manufacture, country of
manufacture and engine type. The engine number is
stamped on the engine block as shown in the picture.
TIRE SPECIFICATION
AND PRESSURE LABEL
The tires on your new vehicle are chosen to provide
the best performance under normal driving conditions.
The tire label located on the driver’s side center pillar
denotes the tire pressures recommended for your car.
● Keep the recommended tire pressure (33psi)
● Indian roads slope are towards the outer side
o
o
(3 -6 ), which may cause the vehicle to drift
outwards
● While driving, always hold the steering wheel lightly
so that the vehicle moves straight
5
SAFETY
KEYS:
Keys can be used to start/stop the engine, lock/unlock
the doors (or tailgate).
● This function helps you conveniently lock/unlock
the door locks from a distance or when inside the
cabin, giving you maximum safety and protection
● The doors will not lock if the ignition key is in the
ignition switch
Remote Keyless Entry
1. Lock (All hazard lights blink once to indicate all
doors are locked)
2. Unlock (All hazard lights blink twice to indicate all
doors are unlocked)
Smart Key
The functions of buttons on a smart key are similar
to the remote keyless entry. A smart key can lock and
unlock the door/ trunk locks and even start the engine
without inserting the key into the ignition lock.
● To remove the mechanical key, press and hold the
release button
● To reinstall the mechanical key, put the key into the
hole and push it until a click sound is heard
START/STOP SWITCH
Start/stop Switch: This button is provided to
switch on and switch off the engine. The engine
will start only if the immobilizer senses the key
within the specified distance.
Using The Door Handle Switch
● Press the button of the front outside door handles
with all doors (and trunk) closed to lock the doors.
The button will only operate when the smart key
is within 0.7~1 m (28~40 in.) from the outside door
handle.
6
● Even though you press the outside door handle
buttons, the doors will not lock and the chime will
sound for 3 seconds if any of following occur:
▶The smart key is in the vehicle
▶The ignition switch is in ACC or ON position
▶Any door except the trunk is open
CENTRAL LOCKING
● The driver’s door lock controls the central locking
system
● When the driver’s door is locked the passenger
doors also get locked automatically
Using central door lock switch
Operate by pressing the central door lock switch.
● When pushing down on the front portion (1) of the
switch, all vehicle doors will lock
● When pushing down on the rear portion (2) of the
switch, all vehicle doors will unlock
Immobilizer System (If Equipped):
● Electronic Engine Immobilizer System is provided to
reduce the risk of unauthorized vehicle use
To deactivate the immobilizer system:
● Insert the ignition key into the key cylinder and turn
it to the ON position
To activate the immobilizer system:
● Turn the ignition key to the OFF position. The
immobilizer system activates automatically. Without a
valid ignition key for your vehicle, the engine will not
start
Theft Alarm System (If Equipped):
This system is designed to provide protection from
unauthorized entry into the car. If triggered, the
system provides an audible alarm with blinking of the
hazard warning lights. The alarm will be activated if any
of the following occurs whilst the system is armed;
● A door is opened without using the transmitter (or
smart key)
7
● The trunk is opened without using the transmitter
(or smart key)
● The engine bonnet is opened
CHILD-PROTECTOR REAR DOOR LOCK
● Child-protector rear door lock feature is provided so
that the doors cannot be opened from the inside
● Move the protector lever to the “Lock” position and
close the door to activate
● Move the lever to the “UnLock” position when
normal door operation is desired
● To open the door from outside, pull the outside door
handle
AIRBAG - SUPPLEMENTAL
RESTRAINT SYSTEM (If equipped)
● An Airbag is a vehicle safety device. It inflates
instantly in the event of a serious frontal or side
collision in order to help protect the occupant from
serious physical injury (refer to the Owner’s Manual
for details)
●
In case of any problem in the system an airbag
warning light in your instrument panel will glow to
alert you of a potential problem with your airbag
supplementary restraint system
1. Driver’s Front Airbag*
2. Passenger front Airbag*
3. Side Airbag*
4. Curtain Airbag*
*: if equipped
WARNING
Even in vehicles with airbags, you and your passengers must always wear the safety belts
provided in order to minimize the risk and severity of injury in the event of a collision or rollover.
CHILD RESTRAINT SYSTEM
(If equipped)
● Children riding in the car should sit in the rear seat
and must always be properly restrained to minimize
the risk of injury in an accident, sudden braking or
sudden maneuver
8
SPEED SENSING DOOR LOCK SYSTEM
All doors automatically lock after the vehicle speed
exceeds 15 km/h and all doors automatically unlock
when you turn the engine off or when you remove the
ignition key
IMPACT SENSING DOOR UNLOCK
SYSTEM (If equipped)
All doors automatically unlock after an impact causing
the airbags to deploy.
SEAT & SEAT BELTS
HOW TO SIT COMFORTABLY
Adjusting Seat Forward And Backward
Manual (If Equipped): To move the seat forwards
or backwards, pull the seat slide adjustment lever up
and hold it. Slide the seat to the position you desire.
Release the lever and make sure the seat is locked
in place.
Automatic (If Equipped): Push the control switch
forwards or backwards to move the seat to the desired
position. Release the switch once the seat reaches the
desired position.
Adjusting Seatback Angle
Manual (If Equipped): To recline the seatback, lean
forward slightly and pull up the front portion of the
seatback recline lever. Carefully lean back on the seat
and adjust the seatback of the seat to the position you
desire. Release the lever and make sure the seatback is
locked in place. (The lever MUST return to its original
position for the seatback to lock.)
Automatic (If Equipped): Push the control switch
forwards or backwards to move the seatback to the
desired angle. Release the switch once the seat reaches
the desired position.
9
Adjusting Seat Cushion Height (If
Equipped)
Manual (If Equipped): To change the height of
the seat cushion, push the lever that is located on the
outside of the seat cushion upwards or downwards.
● To lower the seat cushion, push the lever down
several times
● To raise the seat cushion, pull the lever up several
times
Automatic (If Equipped): Pull the front portion of
the control switch up to raise or down to lower the front
part of the seat cushion. Pull the rear portion of the
control switch up to raise or down to lower the rear part
of the seat cushion. Release the switch once the seat
reaches the desired position.
Lumbar Support (For driver’s seat, if
Equipped)
The lumbar support can be adjusted by pressing the
lumbar support switch on the side of the driver’s
seat. Press the front portion of the switch to increase
support, or the rear portion of the switch, to decrease
support.
Headrests
The driver’s and front passenger’s seats are equipped
with a headrest for the occupant’s safety and comfort.
The headrest not only provides comfort for the driver
and front passenger, but also helps to protect the head
and neck in the event of a collision.
Adjusting the Headrest Height and
Angle (If Equipped)
● To raise the headrest, pull it up to the desired
position or remove completely (2)
● To lower the headrest, push and hold the release
button (1) on the headrest support and lower the
headrest to the desired position (3)
10
Headrest Adjustment (Fig A)
A
The headrest may be adjusted forward to
3 different positions by pulling the headrest
forward to the desired detent.
Active Headrest (Fig B)
The active headrest is designed to move forward and
upward during a rear impact. This helps to prevent
the driver’s and front passenger’s heads from moving
backward and thus helps prevent neck injuries.
B
Seat Warmer (If Equipped) (Fig C)
The seat warmer is provided to warm the front seats
during cold weather. When the ignition switch is in the
ON position, press the front portion of the switches to
warm the driver’s seat or the front passenger’s seat.
● The temperature setting of the seat is changed as
Follows :
Air Ventilation Seat (If Equipped)
The air ventilation is provided to cool the front seats
during hot weather by blowing air through small vent
hole on the surface of the seats and seatbacks.
● Each time you press the button, the airflow will
change as follows :
Seat Belts
The use of seat belts reduces the risk of accident injury
by avoiding collision with the interior of the car and by
preventing the occupants from being thrown out of the
car.
Seat Belt Warning (If Equipped)
As a reminder to the driver, the seat belt warning light
will blink for approximately 6 seconds each time you
turn the ignition switch on regardless of belt fastening.
If the driver’s seat belt is unfastened after the ignition
switch is ON, the seat belt warning light blinks again for
approximately 6 seconds.
C
11
To Fasten Your Seat Belt
To fasten your seat belt, pull it out of the retractor and
insert the metal tab (1) into the buckle (2). There will be
an audible “click” when the tab locks into the buckle.
The seat belt automatically adjusts to the proper length
only after the lap belt portion is adjusted manually.
Height Adjustment (Front Seat)
You can adjust the height of the shoulder belt anchor to
one of 3 positions for maximum comfort and safety. To
raise the height adjuster, pull it up (1).
To lower it, push it down (3).
while pressing the height adjuster button (2).
Seat belts can also be lengthened and shortened as per
comfort and requirement.
To Release The Seat Belt
The seat belt is released by pressing the release button
(1) in the locking buckle. When it is released, the belt
should automatically draw back into the retractor.
Pre-tensioner Seat Belt
Your vehicle is equipped with driver’s and front
passengers pre-tensioner seat belts. The purpose of
the pre-tensioner is to make sure that the seat belts fit
tightly against the occupant’s body in certain frontal
collisions.
TRIP COMPUTER
The trip computer is a microcomputer controlled driver
information system that displays information related
to driving on the display when the ignition switch is in
the ON position. All stored driving information (except
odometer) is reset if the battery is disconnected.
1. Odometer (km)
The odometer indicates the total distance the vehicle
has been driven. The odometer is always displayed
until the display is turned off.
2. Trip meter (km)
TRIP A: Trip meter A
TRIP B: Trip meter B
This mode indicates the distance of individual trips
selected since the last trip meter reset.
12
3. Distance to empty (Km) (If
Equipped)
This mode indicates the estimated distance to empty
based on the current fuel in the fuel tank and the
amount of fuel delivered to the engine.
4.
Average fuel consumption
(If Equipped) (Km/L)
This mode calculates the average fuel consumption
from the total fuel used and the distance since the
last average consumption reset.
5. Instant fuel consumption (Km/L)
(If Equipped)
This mode calculates the instant fuel consumption
every 2 seconds from the driving distance and
quantity of fuel injection.
6. Average speed (Km/h)
This mode calculates the average speed of the vehicle
since the last average speed reset. Even if the vehicle
is not in motion, the average speed keeps going while
the engine is running.
7. Elapsed time
This mode indicates the total time traveled since the
last driving time reset. Even if the vehicle is not in
motion, the driving time keeps going while the engine
is running.
8. ECO ON/OFF mode (If Equipped)
You can turn the shift indicator on/off on the
instrument cluster in this mode. If you push the
RESET button for more that 1 second in the ECO ON
mode, ECO OFF is displayed in the screen and the
shift indicator turns off. If you want to display the
shift indicator again, press the RESET button for more
than 1 second in the ECO OFF mode and then ECO ON
mode is displayed in the screen.
13
Manual transaxle shift indicator
(If Equipped)
This indicator informs you which gear is desired while
driving to save fuel.
For example
: Indicates that shifting up to the 3rd gear is
desired (currently the shift lever is in the 2nd gear).
: Indicates that shifting down to the 3rd gear is
desired (currently the shift lever is in the 4th gear).
Driver Seat Position Memory System
(If Equipped)
A driver position memory system is provided to store
and recall the driver seat position with simple button
operation. By saving the desired position into the system
memory, different drivers can reposition the driver seat
based upon their driving preference. If the battery is
disconnected, the position memory will be lost and the
default driving position should be restored in the system.
MIRRORS
Day/Night Inside Rear View Mirror
Pull the day/night lever toward you to reduce the glare
from the headlights of the vehicles behind you during
night driving. Remember that you lose some rear view
clarity in the night position.
Electric Chromic Mirror (ECM) (If
Equipped)
The electric chromic mirror automatically controls the
glare from the headlights of the car behind you at
night or low light driving conditions. When the engine
is running, the glare is automatically controlled by the
sensor mounted in the rear view mirror
To operate the electric rear view mirror:
Press the ON/OFF button (1) to turn the automatic
dimming function on/off. The mirror indicator light will
illuminate.
NIGHT
DAY
Rear view display
(if equipped)
Sensor
Indicator
14
Outside Rear View Mirrors
Be sure to adjust mirror angles before driving. Your
vehicle is equipped with both left hand and right-hand
outside rear view mirrors. The mirrors can be adjusted
remotely with the remote switch. The mirror heads can
be folded back to prevent damage during an automatic
car wash or when passing in a narrow street.
Remote control: The electric remote control mirror
switch allows you to adjust the position of the left and
right outside rear view mirrors. Push the switch (1) to
R or L to select the right side mirror or the left side
mirror, then press a corresponding point on the mirror
adjustment control to position the selected mirror up,
down, left or right.
Folding The Outside Rear View Mirror
Electric Type: To fold the outside rear view mirror,
depress the button. To unfold it, depress the button
again.
Power Windows (If Equipped):
The ignition switch must be in the ON position for power
windows to operate. Each door has a power window
switch that controls the door’s window. The driver has a
power window lock switch which can block the operation
of passenger windows.
Window opening and closing: The driver’s door
has a master power window switch that controls all the
windows in the vehicle. To open or close a window, press
down or pull up the front portion of the corresponding
switch to the first detent position (5).
Auto up/down window (if equipped): Depressing
or pulling up the power window switch momentarily to
the second detent position (6) completely lowers or lifts
the window even when the switch is released.
Automatic reversal: If the upward movement of the
window is blocked by an object or part of the body, the
window will detect the resistance and will stop upward
movement. The window will then lower approximately 30
cm (11.8 in.) to allow the object to be cleared.
WARNING
In case of the electric type of outside rearview mirror, don’t fold it by hand. It could
cause the failure of the motor.
15
OPERATING ENGINE HOOD,
TAILGATE AND FUEL FILLER LID
ENGINE HOOD
1. Pull the release lever to unlatch the bonnet. The
bonnet should pop open slightly
2. Go to the front of the vehicle, raise the bonnet
slightly, pull the secondary latch (1) inside of the
bonnet centre and lift the bonnet (2)
3. Raise the bonnet. It will raise completely by itself after
it has been raised about halfway
TRUNK
Opening the trunk: To open the trunk, press the
trunk unlock button for more than 1 second on the
transmitter (or smart key), press the button on the trunk
handle with the smart key in your possession.
To open the trunk from inside the vehicle, pull the trunk
lid release lever. Once the trunk is opened and then
closed, the trunk is locked automatically.
Fuel Filler Lid
Opening the fuel filler lid: The fuel filler lid must
be opened from inside the vehicle by pushing the
fuel filler lid opener button.
1. Stop the engine
2. To open the fuel filler lid, push the fuel filler lid
opener button
3. Pull the fuel filler lid (1) out to fully open
4. To remove the cap, turn the fuel tank cap (2)
counterclockwise
5. Refuel as needed
REAR PARKING ASSIST SYSTEM (If
Equipped)
The rear parking assist system assists the driver while
reversing the vehicle by chiming if any object is sensed
within a distance of 120 cm (47 in.) behind the vehicle.
16
This system is a supplemental system and it is not
intended to nor does it replace the need for extreme
care and attention of the driver.
Operating Condition:
● This system will activate when backing up with the
ignition switch on
● The sensing distance whilst the rear parking assist
system is in operation is approximately 120 cm (47 in.)
● When more than two objects are sensed at the same
time, the closest one will be recognized first
REARVIEW CAMERA (If Equipped)
The rearview camera will activate when the back-up
light is on with the ignition switch on and the shift lever
in the R position. This system is a supplemental system
that shows behind the vehicle through the monitor whilst
reversing. To turn on or off the monitor, press the ON/
OFF button (1) with the ignition switch In the ON position
and the shift lever in the R (Reverse) position.
HAZARD WARNING FLASHER
The hazard warning flasher should be used whenever
you find it necessary to stop the car in a hazardous
location. When you must make such an emergency stop,
always pull off the road as much as possible.
BATTERY SAVER FUNCTION
The purpose of this feature is to prevent the battery
from being discharged. The system automatically turns
off the parking lights when the driver removes the
ignition key (smart key: turns off the engine) and opens
the driver’s side door.
HEADLIGHT ESCORT FUNCTION (If
Equipped)
If you turn the ignition switch to the ACC or OFF position
with the headlights ON, the headlights (and/or tail lights)
remain on for about 20 minutes. However, if the driver’s
door is opened and closed, the headlights are turned
off after 30 seconds. The headlights can be turned off
by pressing the lock button on the transmitter (or smart
key) twice or turning the light switch to the OFF or Auto
position. However, the Headlight escort function can
17
be deactivated when the headlight switch is in the Auto
position.
HEADLIGHT WELCOME FUNCTION (If
Equipped)
When the headlight is on or in AUTO position and all
doors (and trunk) is closed and locked, if you press the
door unlock button on the transmitter (or the smart key),
the headlight will come on for about 15 seconds. At this
time, if you press the door lock or unlock button, the
headlight will turn off immediately.
LIGHTING CONTROL
The light switch has a Headlight and a Parking light
position. To operate the lights, turn the knob at the end
of the control lever to one of the following positions:
(1) OFF position
(2) Parking light position
(3) Headlight position
a
(4) Auto light position
a) Parking Light Position ( )
When the light switch is in the parking light position, the
tail, license and instrument panel lights are on and the
tail light indicator is on. (If Equipped)
b
b) Headlight Position ( )
When the light switch is in the headlight position, the
head, tail and license lights are on.
c) Auto Light Position
c
When the light switch is in the AUTO light position,
the taillights and headlights will be turned on or off
automatically depending on the amount of light outside
the vehicle.
d) High Beam Operation
To turn on the high beam headlights, push the lever
away from you. Pull it back for low beams. The high
beam indicator will light when the headlight high beams
are switched on.
d
18
e) Flashing Headlights
e
To flash the headlights, pull the lever towards you. It will
return to the normal (low beam) position when released.
The headlight switch does not need to be on to use this
flashing feature.
f) Turn Signals And Lane Change Signals
f
The ignition switch must be on for the turn signals to
function. To turn on the turn signals, move the lever up
or down (A).
g) Front Fog Light
Fog lights are used to provide improved visibility and
avoid accidents when visibility is poor due to fog,
rain or snow etc. The fog lights will turn on when fog
light switch (1) is turned on after the parking light is
turned on.
HOW TO REMOVE HEADLIGHT
CONDENSATION/MOISTURE.
After heavy rain or washing, mist/moisture can be
formed inside headlight and taillamps due to temperature
difference between lamp inside & outside.
To remove the moisture formed inside the headlamp.
Switch ON the headlamps for 30 mintutes and the
moisture will automatically disappear within 30 minutes.
Manual Climate Control System
1. Temprature Control: This is used to turn the heating
on and off and to select the degree of temprature
desired
2. A/C on and off switch: The air condition is turned on
by starting the AC button
3. Air Intake Control: This allows you to select fresh
outside air or to recirculate inside air
4. Air Flow Control: This is used to direct the flow of air.
Air can be directed to floor, face, dashboard outlets
or windshield
5. Fan Speed Control: This is used to control the blower
speed and turn the blower fan on or off
DEFOGGING WINDSHIELDS
g
19
Recirculated Air Position: The
indicator light on the button illuminates
when the recirculated air position
is selected, with the recirculated air
position selected, air from passenger
compartment will recirculate in the
passenger compartment.
Fresh Air Position: With the outside
(fresh) air position selected, air enters the
vehicle from outside and is heated or cooled
according to the function selected.
To Remove Internal Fog On Windshield
● Set air intake to fresh air mode by switching off
recirculation mode
● Set air flow to defrost
● Turn on the A/C
● Set temprature control to desired position
● Set fan speed as required
To Remove External Fog On Windshield
● Set air intake to fresh air mode by switching off
recirculation mode
● Set air flow control to defrost
● Set temprature control to warm
● Set fan speed to higher position
NOTE
Blower without A/C should only be used with fresh air mode to avoid any fogging. Operate
A/C at blower first after initial cooling at high speed. Do not turn the louvers towards
window side to prevent formation of fog on windows.
20
Use Rear Defogger Switch To Clear
Rear Windshield Fog (If Equipped):
The defroster heats the window to remove frost, fog
and thin ice from the rear window, while the engine is
running. To activate the rear window defroster, press
the rear window defroster button located in the center
fascia switch panel.
DOES YOUR A/C GET COLD
ENOUGH ?
● If the interior of the car is very hot when you first get
in, open the windows for a few minutes to expel the
hot air
● When you are using the air conditioning system, keep
all windows closed to keep hot air out
● When moving slowly, as in heavy traffic, shift to
a lower gear. This increases engine speed, which
in turn increases the speed of the air conditioning
compressor
● On steep grades, turn the air conditioning off to avoid
the possibility of the engine overheating
● During winters or in periods when the air conditioning
is not used regularly, run the air conditioning once
every 15 days for a few minutes. This will help
circulate the lubricants and keep your system in peak
operation condition
● To prevent dust or unpleasant fumes from entering
the car through the ventilation system, temporarily
set the air intake control at the recirculation mode. Be
sure to return the control to the fresh air mode
WIPERS AND WASHERS
Windscreen wipers operate as follows when the ignition
switch is turned on.
MIST : For a single wiping cycle, push the lever upward
and release it with the lever in the OFF position. The
wipers will operate continuously if the lever is pushed
upward and held.
OFF :
Wiper is not in operation
INT
Wiper operates intermittently at the same
wiping intervals. Use this mode in a light rain or
:
21
mist. To vary the speed setting, turn the speed
control knob(1).
LO
:
Normal wiper speed
HI
:
Fast wiper speed
AUTO CONTROL (IF EQUIPPED)
The rain sensor located on the upper end of the
windscreen glass senses the amount of rainfall and
controls the wiping cycle for the proper interval. The
more it rains, the faster the wiper operates. When the
rain stops, the wiper stops. To vary the speed setting,
turn the speed control knob (1).
WINDSCREEN WASHERS
In the OFF position, pull the lever gently toward you to
spray washer fluid on the windscreen and to run the
wipers 1-3 cycles. Use this function when the windscreen
is dirty. The spray and wiper operation will continue until
you release the lever.
HEADLIGHT WASHER (IF EQUIPPED)
If your vehicle is equipped with the headlight washer
it will operate at the same time when you operate the
windscreen washer. It will operate when the headlight
switch is in the first or second position and the ignition
switch or engine start/stop button is in the ON position.
The washer fluid will be sprayed on to the headlights.
22
Automatic Climate Control System
(If Equipped)
1
3
10
2
6
4
7
11
5
12
13
8
9
1.
2.
3.
4.
5.
6.
7.
8.
Front windshield defrost button
Rear window defost button
AUTO (automatic control) button
OFF button
Driver’s temperature control knob
Mode indicator
Mode selection button
Fan speed indicator
AUTOMATIC HEATING AND AIR
CONDITIONING
The automatic climate control system is controlled
by simply setting the desired temperature. The
Full Automatic Temperature Control (FATC) system
automatically controls the heating and cooling system
as follows;
1. Push the AUTO button. The modes, fan speeds,
air intake and air-conditioning will be controlled
automatically by temperature setting.
2. Turn the temperature control knob to set the desired
temperature. If the temperature is set to the lowest
setting (LO), the air conditioning system
will operate continuously
9. Fan speed control switch
10. Air intake control button
11. Air conditioning button
12. Dual temperature control
selection button
13. Passenger’s temperature control
knob
23
3. To turn the automatic operation off, press any button
except the temperature control knob. If you press
the mode selection button, air conditioning button,
defrost button or the fan speed knob, the selected
function will be controlled manually while other
functions operate automatically
NOTE
Never place anything over the sensor located on the instrument panel to ensure
better control of the heating and cooling system.
FOR SMOOTH GEAR SHIFTING
Manual Transaxle Operation
The manual transaxle has 6 forward gears. This shift
pattern is imprinted on the shift knob. The transaxle is
fully synchronized in all forward gears so shifting to
either a higher or a lower gear is easily accomplished.
Press the clutch pedal down fully whilst shifting, then
release it slowly. If your vehicle is equipped with an
ignition lock switch, the engine will not start when
starting the engine without depressing the clutch pedal.
(If equipped)
NOTE:
● The clutch should be pressed all the way to the
floor before gear shifting then released slowly after
finishing gear change for smooth acceleration
● When blocking happens during shift into reverse gear,
slightly lift your foot to a quarter of the full stroke
while pushing the lever to the reverse gear direction
● There can be gear grinding noise if you shift into “R”
position too quickly or with vehicle moving to prevent
it move the lever into “R” position after your car has
completely stopped
Automatic Transaxle
The automatic transaxle has 6 forward speeds and
one reverse speed. The individual speeds are selected
automatically, depending on the position of the shift
lever.
P (Park): Always come to a complete stop before
shifting into P (Park). This position locks the transaxle
and prevents the drive wheels from rotating.
24
R (Reverse): Use this position to drive the vehicle
backwards.
N (Neutral): The wheels and transaxle are not engaged.
The vehicle will roll freely even on the slightest incline
unless the parking brake or service brakes are applied.
D (Drive): This is the normal forward driving position.
The transaxle will automatically shift through a 6-gear
sequence, providing the best fuel economy and power.
SPORTS MODE
Whether the vehicle is stationary or in motion, sports
mode is selected by pushing the shift lever from the D
(Drive) position into the manual gate. In sports mode,
moving the shift lever backwards and forwards will allow
you to make gearshifts rapidly.
Up (+)
:
Down (-) :
Push the lever forward once to shift up
one gear
Pull the lever backwards once to shift
down one gear
Paddle Shifter (If Equipped)
The paddle shifter is available when the shift lever is in
the D position or the sport mode
Shift-Lock Override
If the shift lever cannot be moved from the P (Park) or
N (Neutral) position into R (Reverse) position with the
brake pedal depressed, continue depressing the brake,
then do the following:
1. Carefully remove the cap covering the shift-lock
override access hole
2. Insert a screwdriver (or key) into the access hole and
press down on the screwdriver (or key)
3. Move the shift lever
4. We recommend that the system be inspected by an
authorized HYUNDAI dealer
PARKING BRAKE
Applying the parking brake
25
Foot type (If Equipped): To engage the parking
brake, first apply the foot brake and then depress the
parking brake pedal down as far as possible.
Hand type (If Equipped): To engage the parking
brake, first apply the foot brake and then pull up the
parking brake lever as far as possible.
Foot Type
Releasing the parking brake
Foot type (If Equipped): To release the parking
brake, depress the parking brake pedal a second
time whilst applying the foot brake. The pedal will
automatically extend to the fully released position.
Hand type (If Equipped): To release the parking
brake, first apply the foot brake and pull up the parking
brake lever slightly. Secondly depress the release button
(1 and lower the parking brake lever (2) whilst holding
the button.
Cruise Control System (If Equipped)
The cruise control system allows you to program the
vehicle to maintain a constant speed without pressing the
accelerator pedal. This system is designed to function
above approximately 40 km/h (25 mph).
To Set Cruise Control Speed:
1. Push the cruise ON-OFF button on the steering
wheel to turn the system on. The CRUISE indicator
light in the instrument cluster will illuminate
2. Accelerate to the desired speed, which must be more
than 40 km/h (25 mph)
3. Push the SET- switch, and release it at the desired
speed. The SET indicator light in the instrument
cluster will illuminate. Release the accelerator pedal.
The desired speed will automatically be maintained
To cancel Cruise Control, do one of the
following:
● Press the brake pedal
● Press the clutch pedal with a manual transaxle
● Shift into N (Neutral) with an automatic transaxle
Hand Type
26
● Press the CANCEL switch located on the steering
wheel
● Decrease the vehicle speed lower than the memory
speed by 15 km/h (9 mph)
● Decrease the vehicle speed to less than approximately
40 km/h (25 mph)
Power Outlet (If Equipped)
The power outlet is designed to provide power for
mobile telephones or other devices designed to operate
with vehicle electrical systems. The devices should draw
less than 10 amps with the engine running.
Cigarette Lighter (If Equipped)
For the cigarette lighter to work, the ignition switch must
be in the ACC position or the ON position. To use the
cigarette lighter, push it all the way into its socket. When
the element has heated, the lighter will pop out to the
“ready” position.
Digital Clock (If Equipped)
Whenever the battery terminals or related fuses are
disconnected, you must reset the time. When the ignition
switch is in the ACC or ON position, the clock buttons
operate as follows :
Hour (1)
Pressing the H button with your finger, a pencil or similar
object will advance the time displayed by one hour.
Minute (2)
Pressing the M button with your finger, a pencil or
similar object will advance the time displayed by one
minute.
AUX, USB AND iPOD PORT (if
equipped)
If your vehicle has an AUX and/or USB (universal serial
bus) port/iPod port, you can use an AUX port to connect
audio devices, a USB port to plug in a USB, and an iPod
port to plug in an iPod.
27
Tilt Steering Wheel (If Equipped):
Tilt steering allows you to adjust the steering wheel
before you drive. You can also raise it to give your
legs more room when you exit and enter the vehicle.
The steering wheel should be positioned so that it is
comfortable for you to drive, whilst permitting you to see
the instrument panel warning lights and gauges.
To change the steering wheel angle, pull down the lock
release lever (1), adjust the steering wheel to the desired
angle (2) and height (3), then pull up the lock release
lever to lock the steering wheel in place. Be sure to
adjust the steering wheel to the desired position before
driving.
Bluetooth® Wireless Technology
Bluetooth® Wireless Technology is a wireless technology
that allows multiple devices to be connected in a short
range, low-powered devices like hands-free, stereo
headset, wireless remote control, etc.
General Features: This audio system supports
Bluetooth®Wireless Technology hands-free and stereoheadset features.
HANDS-FREE feature: Making or receiving calls
wirelessly.
STEREO-HEADSET feature: Playing music from cellular
phones (that supports A2DP feature) wirelessly.
Steering Wheel Audio Control (If
Equipped)
The steering wheel audio control button is installed to
promote safe driving.
VOLUME (VOL +/-) (1)
● Press the up button (+) to increase volume
● Press the down button (-) to decrease volume
SEEK/PRESET (^ / v ) (2): If the SEEK/PRESET
button is pressed for 0.8 second or more, it will work as
follows in each mode.
MODE (3): Press the MODE button to select Radio, CD
(Compact Disc) or CDC *(Compact Disc Changer).
28
ECONOMICAL OPERATION
Inflate tyres at correct pressure
● Maintain correct tyres pressure (33psi for petrol & diesel) as under inflation can lead to an extra
10% on your fuel bill
Maximise use of top gear & drive at a cost conscious speed between
45-50 kmph.
● Maximise the use of top gear for better fuel economy. Top gear driving increases fuel efficiency
by 20% to 25% as compared to 3rd gear driving
Are you driving in low gears to make your engine a fuel-holic?
● Drive your car in correct gear
NOTE
It is wrong to assume the 5th overdrive gear is only for high speed highway driving.
Use of 5th overdrive gear in city driving will greatly help to improve fuel economy.
Avoid frequent gear changes, acceleration and braking
● Avoid frequent gear changes, acceleration and braking through planned driving by looking ahead
and judging the speed of other vehicle & timing of traffic lights etc.
Do not ride the clutch pedal
● Do not ride the clutch pedal. This will cause its slippage, resulting in more fuel consumption and
damage to the clutch parts
Do not leave the car in idle
● Three minutes idling = 1 Km lost. Do not keep the engine idling for more than 2 minutes while
waiting for somebody, loading/unloading or while being stopped by congested traffic or signal
Regular service saves fuel
● Get your car regularly serviced & tuned for improved performance (ex. Engine oil & filter)
Release the parking brake before take off
● Releasing the parking brake fully before take off to avoid straining of Brakes & Engine
Use air conditioner only when it is essential
29
● Use air conditioner judiciously as it consumes 2025% of total fuel consumed
Use Hyundai Genuine oil to increase the mileage
● If you already know that good engine Oil is vital to your engine’s long life and Smooth
performance, it is rather easy to choose one. Use only Hyundai Genuine Oils for Engines,
Transmission, Brakes and Radiator coolant
Travel Light
● Take all unnecessary load off your car. Avoid carrying stuff you don’t require for your current
trip. Travelling light allows your engine to run smoothly without wasting effort & fuel
NOTE
Driving habit and traffic condition will affect the fuel economy.
Understanding Normal Vehicle Operation
There may be a number of operation conditions where you may experience a slight change in
engine speed. These conditions do not indicate a problem, in fact, they are normal. We are providing
you with this information to ensure that you have accurate information regarding your vehicle.
Note: Some of the features listed below are optional on some vehicles and may not be applicable
to your specific vehicle.
Engine Power Condition When Air Conditioner is ON
AC Compressor is connected with
engine to make use of engine power
for compressor function, whenever
AC is ON, and there will be minor drop
in engine power due to power sharing
from engine to AC compressor, which
is a normal phenomenon and there is
no existence of engine power loses.