Phonak Bolero V-M (V90/V70/V50/V30) (SlimTube HE)

Technical Data
Phonak Bolero V-M (V90/V70/V50/V30) (SlimTube HE)
Small micro BTE, battery size 312 (for fitting range, product
details and available options, please see Product Information or
visit www.phonakpro.com).
Unless otherwise specified, all data obtained are measured in a
closed configuration with a straight measurement SlimTube HE (Art.
No. 004-0425) and a coupling disc (Art. No. 002-0412) onto a HA-1
coupler (ANSI-S3.7-1995) or an occluded-ear simulator (EN 60711,
coupling arrangement according to fig. 4 in the test standard), and in
the Phonak Target measurement settings.
Ear simulator data
ANSI S3.22-2009
Output sound pressure level
Nominal
122 dB SPL
Maximum
125 dB SPL
HFA
112 dB SPL
130
Full on gain
(Input 90 dB SPL)
120
110
Output sound pressure level
100
1600 Hz
116 dB SPL
90
80
140
Full on gain
(Input 90 dB SPL)
130
120
110
100
1000
Acoustic gain
100
90
Maximum
56 dB
dB
80
10000
HFA
48 dB
RTG
35 dB
70
Full on gain
(Input 50 dB SPL)
70
100
1000
60
10000
50
Acoustic gain
Maximum
60 dB
dB
Reference test gain
(Input 60 dB SPL)
40
1600 Hz
55 dB
RTG
41 dB
30
20
70
Full on gain
(Input 50 dB SPL)
60
50
Reference test gain
(Input 60 dB SPL)
40
100
1000
10000
Frequency range
<100 Hz - 6500 Hz
Total harmonic distortion
500 Hz
1.5%
Battery current
Quiescent Working
1 mA
1.3 mA
Equivalent input noise level
19 dB SPL
30
20
100
1000
10000
Frequency range
<100 Hz - 6600 Hz
Total harmonic distortion
500 Hz
1.5%
Battery current
Quiescent Working
1 mA
1.2 mA
Equivalent input noise level
19 dB SPL
800 Hz
1.5%
1600 Hz
2%
800 Hz
1.5%
Induction coil sensitivity
HFA-SPLIV
95 dB SPL
dB SPL
TLS
0 dB
110
Reference test gain
(Input 31.6 mA/m)
100
Induction coil sensitivity
dB SPL
Maximum
89 dB SPL
1600 Hz
85 dB SPL
1600 Hz
2%
90
80
(Input 1 mA/m)
70
110
Reference test gain
(Input 31.6 mA/m)
100
90
60
1000
100
10000
Dynamic data
80
70
Compression
60
100
1000
10000
Dynamic data
Compression
Attack time
Recovery time
10 ms
150 ms
Input / Output characteristics at 2000 Hz
Attack time
Recovery time
10 ms
50 ms
P out dB SPL
130
Full-on-gain
120
Reference test gain
110
100
90
80
30
40
50
60
70
80
90
100
P in dB SPL
V1.00/2015-01/HP © Phonak AG All rights reserved/page 1/2
dB SPL
2cm3 coupler data
dB SPL
EN / IEC 60118 and IEC 60711
Maximum
126 dB SPL
Note: Using pure tone measurements with a digital hearing instrument
can result in a wavy frequency response. This is an artifact resulting
from the use of a narrowband input signal and does not affect the
actual performance with naturally occurring broadband input signals.
Technical Data
Phonak Bolero V-M (V90/V70/V50/V30) (HE10 680)
Warning to hearing care professionals:
This hearing instrument has an output sound pressure level that can
exceed 132 dB SPL. Special care should be taken when fitting this
instrument as there is a risk of impairing the residual hearing of the
user.
Unless otherwise specified, all data obtained are measured with the
hook type HE10 680 and Phonak Target measurement settings.
Note: Using pure tone measurements with a digital hearing instrument
can result in a wavy frequency response. This is an artifact resulting
from the use of a narrowband input signal and does not affect the
actual performance with naturally occurring broadband input signals.
2cm3 coupler data
ANSI S3.22-2009
Output sound pressure level
Ear simulator data
EN / IEC 60118 and IEC 60711
Nominal
129 dB SPL
dB SPL
Maximum
132 dB SPL
HFA
121 dB SPL
140
Output sound pressure level
dB SPL
Maximum
134 dB SPL
Full on gain
(Input 90 dB SPL)
130
120
1600 Hz
133 dB SPL
110
140
Full on gain
(Input 90 dB SPL)
130
120
100
90
80
100
110
100
1000
10000
Acoustic gain
90
80
Maximum
63 dB
70
1000
10000
dB
HFA
54 dB
RTG
44 dB
70
Acoustic gain
Maximum
68 dB
dB
Full on gain
(Input 50 dB SPL)
60
1600 Hz
67 dB
50
RTG
58 dB
Full on gain
(Input 50 dB SPL)
60
50
Reference test gain
(Input 60 dB SPL)
40
30
20
100
Reference test gain
(Input 60 dB SPL)
40
70
1000
30
20
100
1000
Frequency range
<100 Hz - 6500 Hz
Total harmonic distortion
500 Hz
5%
Battery current
Quiescent Working
1 mA
1.4 mA
Equivalent input noise level
19 dB SPL
10000
Frequency range
700 Hz - 6300 Hz
Total harmonic distortion
500 Hz
8%
800 Hz
5%
1600 Hz
2%
Battery current
Quiescent Working
1 mA
1.2 mA
Equivalent input noise level
19 dB SPL
HFA-SPLIV
104 dB SPL
1600 Hz
97 dB SPL
Reference test gain
(Input 31.6 mA/m)
110
(Input 1 mA/m)
1600 Hz
2%
TLS
0 dB
120
Induction coil sensitivity
Maximum
98 dB SPL
800 Hz
3%
Induction coil sensitivity
dB SPL
dB SPL
10000
100
130
Reference test gain
(Input 31.6 mA/m)
120
90
80
70
110
100
1000
10000
100
Dynamic data
90
80
100
1000
10000
Compression
Dynamic data
Compression
Attack time
Recovery time
10 ms
60 ms
Attack time
Recovery time
10 ms
150 ms
Input / Output characteristics at 2000 Hz
P out dB SPL
130
Full-on-gain
120
Reference test gain
110
100
90
80
30
40
50
60
70
80
90
100
P in dB SPL
V1.00/2015-01/HP © Phonak AG All rights reserved/page 2/2
100