Materials Science
April 2015 updated catalog
forthcoming, new and backlist book titles
27-37 St George’s Road – London SW19 4EU — United Kingdom
www.iste.co.uk & www.iste-editions.fr
Materials Science
Scientific Committee
Committee coordinator(s)
Yves Rémond
INSIS–CNRS, Paris
[email protected]
Yves Bréchet, Grenoble-INP
Christophe Derail, Université de Pau et des Pays de l’Adour, Pau
Jacques Lamon, LMT, ENS Cachan
Thomas Pardoen, Université Catholique de Louvain, Belgium
André Pineau, Mines ParisTech, Evry
Carbon Materials
Ceramics
Composites
Construction Materials
Corrosion
Electronic Materials
Geomaterials
Magnetic Materials
Materials Characterization
Materials for Energy Systems
Topics covered
Materials Processing
Metals and Alloys
Optical and Non-Linear Optical Materials
Porous Materials
Properties of Materials
Sensor Materials
Soft Matter
Theory, Modeling and Simulation
Thin Films, Surfaces & Interfaces
Forthcoming Titles
Applied RVE Reconstruction and Homogenization of Heterogenous Materials
by Remond Yves, Ahzi Said, Baniassadi Majid
Capillary Flows in Heterogeneous and Stochastic Porous Media by Ababou Rachid
Characterization of Electromagnetic Materials by Ndagijimana Fabien
Composite Materials Repairs for Reinforced Concrete Structures by Amziane Sofiane, Ferrier E
Dyes and Chomophores in Polymer Science by Lalevée Jacques, Fouassier Jean-Pierre
Fatigue of Titanium Alloys by Bathias Claude, Palin Luc
Generalized Continuum Mechanics and Engineering Applications by Madeo Angela
Heat Transfer in Polymer Composite Materials by Boyard Nicolas
Mechanics of Dislocation Fields by Fressengeas Claude
Multi-mechanism Modeling of Inelastic Material Behavior by Cailletaud Georges, Taleb Lakhdar, Sai Kacem
Physical Chemistry of Surfaces and Functionalization by Joud Jean-Charles, Barthés-Labrousse Marie-Geneviève
—2—
Materials Science
Forthcoming Sets and Titles
Forthcoming Sets
Advanced Composies Materials coordinated by Jacques Lamon
Advanced Polymers coordinated by Thierry Hamaide
Durability and Ageing of Organic Composite Materials coordinated by Marco Gigliotti
Local Approach to Fracture coordinated by André Pineau
Oxidative Ageing of Polymers coordinated by Jacques Verdu
Physics and Chemistry of Materials coordinated by Claudia Mondelli
Local Approach to Fracture
Coordinated by André Pineau
Mines ParisTech, Evry, France
Brittle Fracture by François Dominique, Pineau André
Creep by Pineau André
Ductile Fracture by Pardoen Thomas, Besson Jacques, Chaouadi R
Fatigue by Doquet Véronique, Pommier Sylvie
Fracture and Aging of Materials by Mazière Matthieu
Local Approach to Fracture by Joly Pierre, Moinereau Dominique
Numerical Methods by Besson Jacques, Feyel Frédéric, Lorentz Eric
Oxidative Ageing of Polymers
by Jacques Verdu, Bruno Fayolle, Xavier Colin, Emmanuel Richaud
Chemistry of Polymer Oxidation
Diffusion Process in Polymer Oxidation
Conséquences of Oxidation on Polymer Properties
—3—
Materials Science
Published Titles
Environmental Impact of Polymers
Edited by Thierry Hamaide, University of Lyon, Rémi Deterre, University of Nantes, JeanFrançois Feller, University of Lorient, France
Coordinated by Jack Legrand
ISBN: 9781848216211 • 2014 • 416 pages • USD 195.00 • ISTE-WILEY
This book reviews aspects of the environmental and societal 8. Choice of Materials and Environmental Impact: Case of a
impact of polymer materials. Various lifecycle assessments of Water Bottle.
9. Formulation and Development of Biodegradable and Biopolymers versus other materials are described.
based Multiphase Materials: Plasticized Starch-based
Contents
Materials.
1. Some Notes on Two Controversies around Plastic Materials 10. Different Strategies for Ecoplastics Development.
11. Thoughts about Plastic Recycling. Presentation of a
and their Media Coverage.
Concrete Example: End-of-Life Polypropylene.
2. Plastic Waste and the Environment.
12. Recyclable and Bio-based Materials Open Up New
3. Polymers and Marine Litter.
Prospects for Polymers: Scientific and Social Aspects.
4. Between Prejudice and Realities: How Plastics are
13. Food Packaging: New Directions for the Control of
Essential for the Future.
Additive and Residue Migration.
5. Lifecycle Assessment and Green Chemistry: A Look at
14. Biodegradability and/or Compostability?
Innovative Tools for Sustainable Development.
15. The Regulation by Law of Nanosciences and
6. Are Bioplastics “Green” Plastics?
Nanotechnologies.
7. Environmental Characterization of Materials for Product
16. Teaching Sustainable Development.
Design.
Polymer Extrusion
Pierre G. Lafleur, Polytechnique Montreal, Quebec, Canada, Bruno Vergnes, CEMEF-Mines
ParisTech, France
Coordinated by André Pineau
ISBN: 9781848216501 • 2014 • 352 pages • USD 150.00 • ISTE-WILEY
Contents
The authors present the physics of the
mechanisms at stake, then propose models of
varying complexity in order to describe these
mechanisms, before moving forward in the
interpretation of results and the control of flow
conditions. This book is particularly aimed at
engineers and technicians, researchers, and
Masters or PhD students of plastics
manufacturing.
1.
2.
3.
4.
5.
6.
7.
Continuum Mechanics, Rheology and Heat Transfer Overview.
Calculation Methods.
Single-Screw Extrusion.
Co-rotating Twin-Screw Extrusion.
Profile Extrusion.
Production of Films and Sheets.
Wire Coating and Cable Insulation.
—4—
Materials Science
Published Titles
Fatigue Limit in Metals
Claude Bathias, University of Paris 10 Nanterre, France
Materials Science Series
ISBN: 9781848214767 • 2013 • 128 pages • USD 65.00 • ISTE-WILEY
Contents
Is there a fatigue limit in metals? This question is the main focus of this
book.
Written by a leading researcher in the field, Claude Bathias presents a
thorough and authoritative examination of the coupling between plasticity,
crack initiation and heat dissipation for lifetimes that exceed the billion
cycle, leading us to question the concept of the fatigue limit, both
theoretically and technologically.
This is a follow-up to the Fatigue of Materials and Structures series of
books previously published.
1. Introduction on Very High Cycle Fatigue.
2. Plasticity and Initiation in Gigacycle Fatigue.
3. Heating Dissipation in the Gigacycle Regime.
Limite de fatigue des métaux – ISBN: 9781784050153
The above title is published in French by ISTE Editions (www.iste-editions.fr)
Shape-memory Alloys Handbook
Christian Lexcellent, FEMTO-ST, University of Franche-Comté, Besançon, France
Materials Science Series
ISBN: 9781848214347 • 2013 • 400 pages • USD 165.00 • ISTE-WILEY
This title describes the martensitic phase transformation and
the process of martensite platelet reorientation. These two key
elements enable the author to introduce the main features
associated with the behavior of shape-memory alloys (SMAs),
i.e. the one-way shape-memory effect, pseudo-elasticity,
training and recovery.
Contents
1. Some General Points about SMAs.
2. The World of Shape-memory Alloys.
3. Martensitic Transformation.
4. Thermodynamic Framework for the Modeling of Solid
Materials.
5. Use of the “CTM” to Model SMAs.
6. Phenomenological and Statistical Approaches for SMAs.
7. Macroscopic Models with Internal Variables.
8. Design of SMA Elements: Case Studies.
9. Behavior of Magnetic SMAs.
10. Fracture Mechanics of SMAs.
11. General Conclusion.
—5—
Materials Science
Published Titles
Carbon Science and Technology
From Energy to Materials
Pierre Delhaes, University of Bordeaux, France
Materials Science Series
ISBN: 9781848214316 • 2012 • 224 pages • USD 95.00 • ISTE-WILEY
Contents
This book begins by describing the use of solid
carbons as traditional materials, for example in the
steel industry and for ceramics, then moving on to
their technological uses such as active carbons and
carbon fibers, etc., before discussing nanocarbons,
the jewel in the crown of contemporary technological
science.
1. From the Chemical Element to Solids.
2. The Polymorphism of Carbon. – 3. Natural Carbons: Energy Source
and Carbochemistry. – 4. The Role of Carbon in Metallurgy.
5. Black and White Ceramics.
6. Dispersed and Porous Carbons. – 7. Fibers and Composites.
8. Molecular Carbons and Nanocarbons.
9. Carbon Techniques and Innovation.
Damage Mechanics in Metal Forming
Advanced Modeling and Numerical Simulation
Khemais Saanouni, University of Technology of Troyes, France
Materials Science Series
ISBN: 9781848213487 • 2012 • 544 pages • USD245.00 • ISTE-WILEY
This book summarizes the current most effective methods for
Contents
modeling, simulating, and optimizing metal forming processes,
and to present the main features of new, innovative methods
currently being developed which will no doubt be the industrial
tools of tomorrow.
It discusses damage (or defect) prediction in virtual metal
forming, using advanced multiphysical and multiscale fully
coupled constitutive equations.
1. Elements of Continuum Mechanics and Thermodynamics.
2. Thermomechanically-Consistent Modeling of the Metals
Behavior with Ductile Damage.
3. Numerical Methods for Solving Metal Forming Problems.
4. Application to Virtual Metal Forming.
Artificial Materials
Olivier Vanbésien, University of Lille, France
Materials Science Series
ISBN: 9781848213357 • 2012 • 368 pages • USD 177.00 • ISTE-WILEY
This book discusses artificial materials, focusing on photonic
crystals (PC) and metamaterials (MM).
The first part is devoted to design concepts: negative
permeability and permittivity for negative refraction, periodic
structures, transformation optics.
Part 2 concerns PC and MM in a band gap regime: from
cavities and guides to high impedance surfaces.
Abnormal refraction, less than one and negative, in PC and MM
are studied in the third part, addressing super-focusing and
cloaking. Then, applications for telecommunications, lasers and
imaging systems are explored.
Complete table of contents at
http://www.iste.co.uk/index.php?f=a&ACTION=View&id=473
—6—
Materials Science
Published Titles
X-Rays and Materials
Edited by Philippe Goudeau, CNRS, Poitiers and René Guinebretière, ENSCI, Limoges, France
Materials Science Series
ISBN: 9781848213425 • 2012 • 240 pages • USD 147.00 • ISTE-WILEY
Contents
This title presents reviews of
various aspects of radiation/matter
interactions, be these instrumental
developments, the application of
the study of the interaction of Xrays and materials to a particular
scientific
field,
or
specific
methodological approaches.
1. Synchrotron Radiation: Instrumentation in Condensed Matter.
2. Nanoparticle Characterization using Central X-ray Diffraction.
3. X-ray Diffraction for Structural Studies of Carbon Nanotubes and their Insertion
Compounds.
4. Dielectric Relaxation and Morphotropic Phases in Nanomaterials.
5. Evolution of Solid-state Microstructures in Polycrystalline Materials: Application of
High-energy X-ray Diffraction to Kinetic and Phase Evolution Studies.
Wear of Advanced Materials
Edited by J. Paulo Davim, University of Aveiro, Portugal
Materials Science Series
ISBN: 9781848213524 • 2012 • 224 pages • USD 96.00 • ISTE-WILEY
This book presents a collection of examples illustrating the 2. Adhesive Wear Characteristics of Natural Fiber-reinforced
state of the art and research developments into the wear of Composites.
advanced materials in several applications.
3. Resistance to Cavitation Erosion: Material Selection.
4. Cavitation of Biofuel Applied in the Injection Nozzles of
Contents
Diesel Engines.
5. Wear and Corrosion Damage of Medical-grade Metals and
1. Carbon Fabric-reinforced Polymer Composites and
Alloys.
Parameters Controlling Tribological Performance.
Oxidative Ageing of Polymers
Jacques Verdu, Arts et Métiers ParisTech, France
Materials Science Series
ISBN: 9781848213364 • 2012 • 384 pages • USD 167.00 • ISTE-WILEY
This book ehabilitates kinetic modeling in the domain of
polymer ageing, where it has been almost abandoned by the
research community. Kinetic modeling is a key step for lifetime
prediction, a crucial problem in many industrial domains in
which needs cannot be satisfied by the common empirical
methods.
Contents
1. Methodological Aspects.
2. Aspects Common to All Oxidation Processes.
3. Basic Kinetic Schemes.
4. Oxidation and Oxygen Diffusion.
5. Stabilization.
6. Molecular Mobility and Reactivity.
7. Structural Changes Caused by Oxidation.
8. Effects of Oxidation on Physical and Mechanical Properties.
9. Couplings.
10. Oxidation Under Irradiation.
—7—
Materials Science
Backlist Titles (published prior to 2012)
Extractive Metallurgy
Heat Transfer in Materials Forming Processes
With Exercises and Solutions
Jean-Luc Battaglia, University of Bordeaux, France
Alain Vignes, AREVA NP, France
Volume 1 • Basic Thermodynamics and Kinetics
9781848210523 • 2008 • 376 pages • USD 200.00
9781848211605 • 2011 • 368 pages • USD 153.00
Volume 2 • Metallurgical Reaction Processes
Materials with Rheological Properties
9781848212879 • 2011 • 384 pages • USD 153.00
Calculation of Structures
Constantin Cristescu, Institute of Railway Studies and
Research, Bucharest, Romania
Volume 3 • Processing Operations and Routes
9781848212923 • 2011 • 384 pages • USD 153.00
9781848210127 • 2008 • 304 pages • USD 180.00
Grain Boundaries and Crystalline Plasticity
Ceramic Materials
Edited by Louisette Priester, Paris-Sud University, Orsay,
France
Processes, Properties and Applications
Edited by Philippe Boch, ESPCI, Paris and Jean-Claude
Nièpce, University of Burgundy, France
9781848213272 • 2011 • 368 pages • USD 185.00
9781905209231 • 2007 • 592 pages • USD 295.00
Carbon-based Solids and Materials
Pierre Delhaes, CNRS and University of Bordeaux, France
Mechanics of Viscoelastic Materials and Wave
Dispersion
9781848212008 • 2011 • 656 pages • USD 211.00
Fatigue of Materials and Structures
Edited by Claude Bathias, CNAM and André Pineau, ENSMP,
France
Volume 1 – Fundamentals
9781848210516 • 2010 • 528 pages • USD 270.00
Metallurgy and Mechanics of Welding
Volume 3 – Application to Design and Damage
9781848212916 • 2011 • 368 pages • USD 153.00
Mechanical Characterization of Materials and Wave
Dispersion
Instrumentation and Experiment Interpretation
Edited by Yvon Chevalier and Jean Tuong Vinh, ISMEP, St
Ouen, France
9781848210387 • 2008 • 512 pages • USD 230.00
Vapor Surface Treatments
Edited by Alain Galerie, Grenoble INP, France
Plastic Forming Processes
Maurice Reyne, Consultant, France
Machining Composite Materials
9781848210660 • 2008 • 288 pages • USD 165.00
Edited by J. Paulo Davim, University of Aveiro, Portugal
9781848211704 • 2009 • 288 pages • USD 140.00
Structural Components
Edited by Iris Alvarez-Armas, CONICET and UNR, Argentina
and Suzanne Degallaix-Moreuil, Ecole Centrale de Lille,
France
Tom Lassen, Agder University College, Grimstad, Norway
and Naman Recho, University Blaise Pascal, ClermontFerrand, France
Processes and Industrial Applications
Edited by Régis Blondeau, ENSM, St-Etienne, France
9781848211711 • 2009 • 416 pages • USD 180.00
9781848211933 • 2010 • 496 pages • USD 250.00
Fatigue Life Analyses of Welded Structures
Combined Analysis
9781848211988 • 2010 • 544 pages • USD 215.00
9781848212671 • 2011 • 320 pages • USD 153.00
9781848211377 • 2009 • 464 pages • USD 215.00
9781848210776 • 2010 • 672 pages • USD 275.00
Daniel Chateigner, ENSICAEN, France
Volume 2 – Application to Damage and Design
Duplex Stainless Steels
Edited by Yvon Chevalier and Jean Tuong Vinh, ISMEP, St
Ouen, France
Mechanical Tests and Behavioral Laws
Edited by Dominique François, Ecole Centrale de Paris,
France
9781848210158 • 2008 • 344 pages • USD 220.00
Materials and Surface Engineering in Tribology
Jamal Takadoum, ENSMM, Besançon, France
9781848210677 • 2008 • 240 pages • USD 115.00
9781905209545 • 2006 • 432 pages • USD 215.00
—8—
ISTE SCIENCE PUBLISHING GROUP
ISTE Ltd – ISTE Press Ltd – ISTE Editions Ltd
ISTE Contacts
Sami Ménascé, President and Managing Director – [email protected]
Raphaël Ménascé, Vice-President – +44 208 879 4588 – [email protected]
General Adminstration
Chantal Ménascé — +44 208 879 4582 – [email protected]
Editorial and Production
Rebecca Edge, Editorial Manager – +44 208 879 4585 – [email protected]
Ludovic Moulard, Acquisition Editor – +44 208 879 4584 – [email protected]
Scientific Board Members
Jean-Charles Pomerol, Université Pierre et Marie Curie – INSIS/CNRS, Paris, France
(President of the Scientific Board)
Robert Baptist, CEA Grenoble, France
Philippe Baptiste, directeur général délégué à la science du CNRS, Paris, France
Alain Dollet, CNRS – INSIS-CNRS, Paris, France
Bernard Dubuisson, Heudiasyc, Université de Technologie de Compiègne, France
Gilles Pijaudier-Cabot, Université de Pau et des Pays de l’Adour, France
Olivier Pironneau, Université Pierre et Marie Curie, Paris, France
Guy Pujolle, LIP6 – Université Pierre et Marie Curie, Paris, France
Book specifications (production and distribution)
● A SET brings together, under a single title, a limited number of volumes (from a minimum of 3 to a maximum
of approximately 10). Topics are "specialized". The content in each set covers the research and very latest
innovations of the topic.
● FOCUS books, from minimum 50 approx. to 200 pages maximum, which deal with the fundamental,
conceptual and technological aspects of the topic.
● Monographs and multi-author books, usually between 250 and 400 pages long, deal with the fundamental,
experimental and applicative aspects of each topic.
Editorial and formatting guidelines are available at www.iste.co.uk/guidelines.zip.
Database indexing: following SCOPUS and ISI specifications.
● ISTE Ltd has an exclusive book co-publishing and world distribution contract with WILEY.
● ISTE Press Ltd has an exclusive book co-publishing and world distribution contract with ELSEVIER.
● ISTE Editions is distributed worldwide (paper copy only) by NBN International (www.nbninternational.com).
—9—
ISTE – a leading publishing group
ISTE Ltd – ISTE Press Ltd – ISTE Editions
ISTE SCIENCE PUBLISHING
● 30 committees cover all the editorial lines published.
● Over 200 top-level scientists and researchers, from over
20 countries, are members of the ISTE committees.
● They are, together with the members of the Scientific Board,
the backbone of the ISTE Publishing Organization.
Three major editorial lines
Engineering, Technology and Materials Science
Environmental and Life Sciences
Human and Social Sciences
Publications in
English — French
English Language Publications
press
Titles co-published with
WILEY
French Publications
e d i t i on s
Titles co-published with
ELSEVIER
27-37 St George’s Road – London SW19 4EU — United Kingdom
www.iste.co.uk & www.iste-editions.fr