insulation
SilverGlo™ Foam Board & Fasteners
SilverGlo™ is a graphite-infused EPS (Expanded Polystyrene) Foam
Board with a radiant barrier on one side. Without the graphite
and radiant barrier, 2” of EPS has an insulating value of R-7.
By adding the graphite and radiant barrier, 2” thick boards
deliver R-11 insulation values and the 4” boards deliver an
astounding R-20 (at least 1/2” air gap in front of the radiant
barrier is required).
2”
4”
6”
SilverGlo™ is being manufactured here in Connecticut
EXCLUSIVELY for Dr. Energy Saver Dealers and Basement Systems
dealers. This superior product not only offers better insulation
quality with less thickness, it also saves up to 30% in material
cost compared to similar blue or pink XPS foam insulation board
products.
Application Guidelines
SilverGlo™ can be used in many different applications.
However, when installed in a conditioned/living space, it MUST
be covered with a 15-minute fire barrier like drywall. SilverGlo™
is perfect for insulating crawl space walls, crawl space floors,
and when moving attic thermal and pressure boundaries to
roof decks.
Item #05806
Cold-weather Tape (2” x 150’)
$9.00 per roll (24 rolls per box)
SilverGlo™ can be ordered in four convenient sizes. 2” thick
boards are offered in 4’x8’ sheets, 2’x8’ sheets, and 14 ¼“x8’
sheets - perfect for insulating / air-sealing between studs, rafters
and joists. 4” thick boards are available in 2’x8’ sheets.
Item
Description
Price
Price
Pcs
Sq. Ft. Price
Pcs
Sq. Ft. Per Bundle Per Sq. Ft. Per Bundle Per Bundle Per Pallet Per Pallet Per Pallet
05801 2”x2’x8’ (1 side)
$82.38$0.86
6
96 sq. ft. $1,153.32
84
1,344 sq. ft.
05800 2”x4’x8’ (1 side)
$150.84$0.79
6
192 sq. ft. $1,055.88
42
1,344 sq. ft
05802 4”x2’x8’ (2 sides)
$74.97$1.56
3
48 sq. ft. $1,049.58
42
672 sq. ft.
05805
6”x2’x8’ (2 sides)
$82.94$2.59
2
32 sq. ft. $1,161.16
28
448 sq. ft.
$99.00$0.87
12
114 sq. ft. $1,386.00
168
1,596 sq. ft.
05813
4”x14-1/4”x8’ (1 side) $100.62$1.77
6
57 sq. ft. $1,408.68
84
798 sq. ft.
05814
6”x14-1/4”x8’ (1 side) $106.56$2.80
4
38 sq. ft. $1,278.72
48
456 sq. ft.
05803 2”x14-1/4” x 8’ (1 side)
NOTE: When ordering, please specify total number of pieces required.
Item #05804
1 Part Adhesive Foam
$12.75 per can
12 cans/case ( $153.00 per case)
877-479-3637 x7021 / [email protected]
Revision 1-13
Use to
a “Su create
p
See o erAttic!”
ur vid
eo!
1
insulation
05816
silverglo™ Concrete
or Wood Fasteners
Item #04602
3 -1/2” Foam Tite fastener for
B to B panel - (light gray)
250/box$55.50
Item #05815
5” Screw for SilverGlo Hex Drive (for wood only)
1000/box$197.00
Item #05810
3” Foam Tite fastener - (white)
250/box$55.50
Item #05816
7” Screw for SilverGlo Hex Drive
1000/box$269.00
Item #05818
4” Foam Tite fastener - (dark gray)
250/box$55.50
Item #05819
5” Foam Tite fastener - (black)
250/box$55.50
NOTE: All fasteners can be used
in concrete or wood
Soffit
Vent Baffles
silverglo™ Wood
Only Fasteners
Item #05817
3” Washer (used with 5” & 7”
screws for SilverGlo)
1000/box$128.00
05817
Ventilating attics is necessary
to keep the attic cooler in the
summer and drier in the winter
while helping to extend the
service life of roofing shingles,
insulation and attic framing. In
the summer, proper ventilation
will allow the heated air to
escape while cooler air can
enter the attic through the
soffit. Similarly, humid air may be
properly exhausted and fresh air
may enter.
Item # 24001
Soffit Vent Baffles - Bag of 50
$78.00 each
877-479-3637 x7021 / [email protected]
Revision 1-13
2
insulation
PVC Soffit Baffle System
The PVC soffit baffle system is the recommended soffit baffle for Dr.
Energy Saver dealers. It is made of 100% recycled, flame-retardant
PVC. It prevents insulation from migrating into the soffit, meets new
EnergyStar requirements, and easily installs with just 6-8 staples.
Item #24004
PVC soffit baffle: 14.5” x 41” (for 16” o.c. rafters)
Bundle of 50 baffles (shorter version)
$64.80 per bundle
Item #24005
PVC high energy soffit baffle: 22.5” x 50” (for 24” o.c. rafters)
Bundle of 50 baffles (longer version)
$105.80 per bundle
Item #24006
PVC high energy baffle: 14.5” x 50” (for 16” o.c. rafters)
Bundle of 50 baffles (longer version)
$88.50 per bundle
Item #24007
PVC cathedral ceiling baffle: 15” x 48” (for 16” o.c. rafters)
Bundle of 50 baffles
$83.10 per bundle
Item #24013
PVC cathedral ceiling baffle: 23” x 48”
Bundle of 50 baffles
$88.00 per bundle
24005
24006
24013
24007
877-479-3637 x7021 / [email protected]
Revision 1-13
3
insulation
62”L
301/2”W
Inside H 7”
12” H
Dr. Ene
rgy Save
Exclusive
!
44 1/4” x 44 1/4” x 22 3/4”
(outside height)
x 18” (inside height)
r
“David Lewis” Attic Hatch Cover
The David Lewis Attic Hatch Cover is the best yet! It is constructed
with a 5-piece foam-and-dowel system. It ships flat to avoid damage
in shipping and has a R-20 insulation value. Assembles in one minute!
Item #24020
$85.00 each
301/2” L
301/2” W
Inside H 7”
“David Lewis” WHOLE
HOUSE FAN Cover
Just like our other David Lewis
covers – the Whole House Fan
Cover ships flat so it can’t get
broken on its way to you. It
has an R-Value of 20 and is airtight once it is caulked. Use our
self-adhesive weatherseal (Air
Sealing Section) on top of a
bead of caulk as it won’t stick to
the foam to make an airtight fit
onto the attic deck. Everyone
needs to have these on hand for
when a leaky whole house fan is
encountered!
Item #24023
$125.00 each
Dr. Ene
12” H
rgy Save
Exclusive
!
r
Dr. Ene
ExclursgiyveSaver
!
“David Lewis” Scuttle Cover
Much like the David Lewis attic hatch cover, this scuttle cover is
constructed with a 5-piece foam-and-dowel system. It ships flat
to avoid damage during transit and has an R-20 insulation value.
Assembles in one minute!
Item #24022
$72.00 each
877-479-3637 x7021 / [email protected]
Revision 1-13
4
insulation
Insulation Bag
15”x25” mesh “onion bags”
used to create a block when
dense packing a cantilever with
cellulose insulation.
™
Cellulose Insulation
Item #24021
$77.25 per 100
Item #24015
with stabilizer to reduce dusting
$8.95 each (any quantity)
Item #24015
Special Truckload - 1,100 bags
$8.50 ea.
Attic Guard Plus
Loose-Fill Fiberglass Insulation
Available in 33lb bags
Item #24014
$29.25 each
877-479-3637 x7021 / [email protected]
Revision 1-13
5
insulation
1/2-lb. Open-Cell
Foam
2-lb. Closed-Cell
Foam
This ½-pound density open-cell
foam is spray-applied and forms
a completely sealed air barrier
in wall cavities. It adheres well
to most building materials and
will provide a continuous barrier
against air infiltration for the life of
the building. This product provides
exceptional performance in
reducing heat transfer and carries
an aged R-Value of 3.9 per inch.
Your standard 2-pound density
closed cell, spray applied foam.
This product provides exceptional
performance in minimizing heat
transfer, moisture gain and air
leakage. It is one of the most efficient
insulating materials commercially
available with an aged R-Value of
6.3 per inch.
Item #21023K
$2295.00 / Set
Item #21022K
55 gal drums/1000 lbs per set
$2250.00 / Set
2.8-lb. Closed-Cell
Roofing Foam
This roofing foam is a closedcell, polyurethane foam system
specifically designed to provide
a high performance, lightweight
roofing system for use over a wide
variety of roof deck constructions
and configurations. It has a core
density of 2.7 – 2.9 lbs. with an aged
R-Value of 6.5 per inch.
Item #21021
55 gal drums/1000 lbs per set
$2250.00 / Set
Silicone Coating
(call for color options)
Silicone roof coating is a liquidapplied, one-part silicone
coating that is perfect for use
in roofing applications as the
weathering coat over a variety
of roofing materials including
spray-a pplied polyurethane
foam, water-bor ne (acr ylic)
coatings, PVC membranes, and
galvanized (coated) metals.
Our silicone roof coating forms a
durable, breathable, watertight,
and weatherproof barrier that is
extremely resistant to degradation
from natural weathering.
Item #21024
55 gal drum/500 lbs
$1895.00 / drum
Fire-Lok
Fire-Lok is a single-component, single-application, spray-or roller
-applied protective coating for use in ignition barrier and thermal
barrier applications in combination with spray applied urethane foam
insulations. Fire-Lok is a Certified Warnock Hersey listed and rated
product which has passed certified testing for the NFPA-286 Thermal
Barrier and the Modified NFPA 286 for spray Ignition Barrier testing per
AC 377 Appendix X.
Item #21030
$375.00 / 5 gallon bucket
877-479-3637 x7021 / [email protected]
Revision 1-13
6
insulation
THERMAX White
Finish Insulation
THERMAX™ White Finish Insulation
has a glass-fiber reinforced
polyisocyanurate foam core
faced with 1.25 mil embossed
white acrylic-coated aluminum
on one side and 1 mil smooth
aluminum on the other. It can
be pressure-washed up to 1,000
psi with a 15-degree or greater
spray tip (minimum 3’ distance)
and is fire-rated, so it can be left
exposed to interior spaces. The
1.55” product carries an R-10
insulation value.
THERMAX™ White Finish Insulation
is designed as an insulation and
interior finish system for interior
masonry or concrete walls, plus
walls and ceilings in metal, wood
post frame, and concrete or
masonry buildings.
Cellulose Bird House
Use the bird house at your home and trade shows to
demonstrate the superior insulating performance of blown-in
cellulose over blown-in fiberglass. Your homeowner customers will
be impressed and want you to install cellulose in their homes.
Item #29090
$195.00 each
Item #24018
THERMAX white finish insulation –
1.55”x4x8
$42.50 per sheet
Sound Demonstration Bucket
Use the Cellulose Sound Demonstration Bucket at the kitchen table to
effectively illustrate the insulating and acoustical benefits of cellulose
insulation. Just drop the alarm in the bucket and close the lid. You will
be amazed how well the sound is dampened.
Item #29097
$125.00 each
877-479-3637 x7021 / [email protected]
Revision 1-13
7
insulation
RockWool R.B. –
2”x24”x48”
RockWool
Board Insulation
Install this product flat against
chimneys (after air sealing
around the base with metal
flashing and fire caulk) and
blow cellulose right against it!
No more building dams around
chimneys!
This 4# density RockWool board
insulation is manufactured from
mineral wool bonded together
with a high temperature binder.
It is a very efficient, semi-rigid
type of insulation recommended for various applications
from -20°F to 850°F. This product is non-combustible and
has been tested according to
ASTM E136 and ASTM E84. It
has an R-Value of 4.17 per inch.
RockWool Pipe Wrap
12”x1.5”x3’. Install Rockwool Pipe
Wrap around flue pipe and blow
cellulose or spray foam right against
it! It can be easily trimmed with a
knife for flues smaller than 12”. This
#8 density pipe insulation is manufactured from mineral wool bonded
together with a high temperature
binder. It is non-combustible and
has been tested in accordance
with ASTM E136 and ASTM E84. The
product is furnished with ASJ/SSL (all
-service jacket with self-sealing lap).
#4 density RockWool board insulation manufactured from mineral wool bonded together with
a high temperature binder. It is
similar to RockWool Board Insulation but has a foil reinforced
radiant barrier on one side. This
product is non-combustible, has
been tested according to ASTM
E136 and ASTM E84, and has an
R-Value of 4.17 per inch.
Item # 24032
$59.99/bundle of 6
Item #24031
$59.95 set of 2 – 3’ sections
Item #24030
$32.95/bundle of 6
877-479-3637 x7021 / [email protected]
Revision 1-13
8