1. No category

SPECIFICATIONS
SERIES 9
FRAMED OVERLAY SWING MIRROR DOOR
DESCRIPTION
Overlay mirror door consisting of aluminum framed mirror door panel supported
by nylon pivot bushings that operate in surface mount top & bottom pivot brackets.
F E AT U R E S
• Extruded and anodized aluminum stiles and rails, attached to the mirror with
clear glazing channel and positively fastened with electroplated assembly screws.
• Nylon pivot bushings pre-installed on top and bottom of door panel secured by
electroplated assembly screws.
• 12 gauge chrome plated steel surface mount pivot brackets
dimensioned to capture nylon pivot bushings.
S9 RAIL ALUMINUM
EXTRUSION
PIVOT BUSHING
NYLON
• High strength rare-earth magnet pre-installed on stile for
positive connection with chrome plated strike plate.
• 14 gauge chrome plated steel strike plate mounted to the
wall to mate with magnet.
• Clear polyurethane rubber bumper adhered to back of
door panel to soften the impact of door against the wall.
S9 STILE
ALUMINUM
EXTRUSION
81 "
• Clear acrylic mirror pull adhered to mirror door panel
with high performance adhesive.
• 1/8” clear safety backed mirror that conforms to Government Specification
DD-M-00411(b), ANSI Standard Z-97.1-19 and CFR Part 1201, Category II.
• Frame colors: Satin Silver, Satin Gold
TOP PIVOT
BRACKET
SIZES
• Finished Opening
Heights: 80 1⁄2”, 84”
(tolerance + 1⁄2”, - 1⁄2”)
• Finished Opening
Widths: 24”, 25”,
26”, 27”, 28”, 29”,
30”, 31”, 32”, 33”,
34”, 35”, 36”
FLOOR
5/8"
1 1/2"
2 1/2"
FINISHED OPENING
HEIGHT 80 1/2"
4" WIDER THAN OPENING
81 1/4"
• Custom sizes
available.
BOTTOM
PIVOT
BRACKET
1"
1"
MAGNETIC
CATCH
1725 Blaney Troy, Michigan 48084
phone 248.816.1360 fax 248.816.1866
www.daiekproducts.com
PRODUCTS, INC.