NEW P2000 SERIES AIR DISK DRILLS

NEW
P2000 SERIES AIR DISK DRILLS
P2080
I
P2085
NEW P2000 Series air disk drills from New Holland place
seed at the exact depth and down pressure you choose to
ensure quick seedling emergence. They’re ideal for seeding
crops such as wheat, barley, rice, soybeans, and canola,
with excellent performance in both hard and soft soils.
A MODEL TO MATCH YOUR NEEDS
EASY ADJUSTMENTS
You can set seeding depth from 0 to 3.5 inches using an
easy, single-handed adjustment without manual lock, making
it the most stress-free adjustment available. You also have
the convenience of standard, in-cab, down-pressure adjustment up to 100 pounds of pressure.
Choose the three-section, single-fold P2080 disk drill in
30- or 40-foot widths, with a tow-behind or tow-between air
cart. Or, choose the highly maneuverable P2085 with a
mounted seed tank—70 bushels for the 30-foot model and
100 bushels for the 40-foot model.
RUGGED DURABILITY
DESIGNED FOR TOUGH CONDITIONS
DURABLE BY DESIGN
P2000 Series 18-inch opening disks cut cleanly through
the heaviest crop residues and the hardest no-till soils.
The all-new closing system is designed for soil conditions
at both ends of the spectrum. In very hard soils, the packer
wheel does a better job of closing the trench, and in very
soft conditions, it preserves more moisture and leaves a
smooth field finish. The hollow center of the closing system
reduces compaction while providing excellent seed-to-soil
contact.
•
•
•
•
SEEDING PRECISION
Even when seeding at higher speed and in rough terrain,
New Holland’s industry-leading parallel link design
delivers unmatched depth accuracy. You can also expect
unsurpassed ground following over the entire width of the
machine thanks to the industry-leading 25-degree total wing
flex. High flotation walking tandem options ensure maximum
flotation for lower ground pressure and compaction.
These drills are designed to last. They utilize high-strength
parts for reduced wear, long life and less maintenance. The
P2080 and P2085 also offer reduced setup time, resulting in
less maintenance and more time in the field, where it counts.
•
•
•
•
•
•
•
•
Hardened wing pins with replaceable bushings
High-quality, powder-coat paint finish
Welded frame, rather than bolted
Cat IV floating hitch with hardened pins and
replaceable bushings
Row unit cast frame, link and adjustment handle
Heavy-duty packer wheel
High-strength chrome silicon springs
Double row main bearing with integral double lip seals
and external shield
Long-life scraper with integral tungsten carbide
wear components
Larger 1.3” solid main spindle
Earth metal boron 18” steel disk blade
Heavy-duty 1.25” main pivot pins with oil impregnated
copper iron alloy bushings in all locations
AIR DISK DRILL SPECIFICATIONS
SPECIFICATIONS
TOOLBAR WIDTH, ft (m)
Transport height, ft (m)
Transport width (w/o light bracket), ft (m)
Road-to-opener Clearance, in (cm)
Weight (empty), lbs (kg)
Length w/ rear hitch (pin to pin), in (m)
Spacing, in (cm)
Split rank capability, in (cm)
Number of row units
Minimum tractor PTO hp required*
Minimum tractor PTO hp required with air cart*
Ground following
Row unit travel from level surface, in (cm)
Wing flex
Disks, in (cm)
Depth settings, in (cm)
Down pressure adjustment
Closing wheel variable packing pressure, lbs (kg)
Standard in-cab down pressure control, lbs (kg)
Hydraulic requirements, gpm (lpm)
Seed tank, bushels
Mounted tank meter
Optional equipment
P2080
P2080
P2085
P2085
30 ft. (9.1)
40 ft. (12.2)
13 (3.96)
13.8 (4.2)
12 (3.65)
18.5 (5.63)
8.5 (21.6)
8.5 (21.6)
7.5 in. – 19,600 (8900)
7.5 in. – 24,800 (11,250)
10 in. – 17,500 (7900)
10 in. – 22,100 (10,000)
36 ft. 5 in (11.09 )
38 ft. 7 in. (11.75 m)
7.5 (19.1)
10 (25.4)
7.5 (19.1)
10 (25.4)
15 (38.1)
20 (50.8)
15 (38.1)
20 (50.8)
48
36
64
48
195
145
260
195
260 to 295 210 to 245
325 to 360 260 to 295
Parallel link
Parallel link
8.5 (21.6) up, 11.5 (29.2) down
15 degrees up, 10 degrees down
18 (45.7) at 7 degrees, T-handle depth adjustment
14 settings from 0 to 3.5 (8.9), alphabetic callouts for easy setting
Variable spring
Variable spring
60, 75 or 85 (27.2, 34 or 38.6)
200 to 1400 (91 to 635)
200 to 1450 (91 to 658)
NA
NA
Tow between/behind, 280 to 430 bushels
NA
NA
30 ft. (9.1)
40 ft. (12.2)
12 ft. 11 in. (3.94)
13.8 (4.2)
12 (3.65)
18.5 (5.63)
8.5 (21.6)
8.5 (21.6)
7.5 in. – 21,000 (9600)
7.5 in. – 26,500 (12,000)
10 in. – 17,500 (8700)
10 in. – 23,800 (10,800)
36 ft. 5 in. (11.09)
38 ft. 7 in (11.75)
7.5 (19.1) 10 (25.4)
7.5 (19.1)
10 (25.4)
15 (38.1) 20 (50.8)
15 (38.1)
20 (50.8)
48
36
64
48
195
145
260
195
NA
NA
NA
NA
Parallel link
Parallel link
8.5 (21.6) up, 11.5 (29.2) down
15 degrees up, 10 degrees down
18 (45.7) at 7 degrees, T-handle depth adjustment
14 settings from 0 to 3.5 (8.9), alphabetic callouts for easy setting
Variable spring
Variable spring
60, 75 or 85 (27.2, 34 or 38.6)
200 to 1400 (91 to 635)
200 to 1450 (91 to 658)
30 (114) – 3 remotes
30 (114) – 3 remotes
Attached, 70 bushels
Attached, 100 bushels
2-section metering with flow blockage standard
Primary run blockage monitoring
Secondary run (all run) blockage
Hydraulic work switch
Weight bracket
Tow behind rear hitch
Auxiliary rear hitch
Cross tillage hydraulic package
Split-rank header insert, 7.5” (19.1 cm)
Meter roll selection (extra fine, fine, coarse)
IntelliView™ IV monitor
4-section metering with overlap control
Hydraulic work switch
Weight brackets
Meter roll selection (extra fine, fine, coarse)
IntelliView™ IV monitor
NOTE: Additional horsepower is required to tow and operate the air cart. Minimum requirements are a starting point only and should be increased based on operating conditions in the field, road
transport conditions, and other implements that are used with the drill.
The P2085 with mounted seed tank provides even weight
distribution and can reduce input costs and increased
yields by eliminating overlap during headland turns and
when working in oddly shaped fields.
Learn more at www.newholland.com /na
Design, materials and/or specifications are subject to change without notice
and without liability therefor. Specifications are applicable to units sold in
Canada, the United States, its territories and possessions, and may vary
outside these areas.
© 2013 CNH America LLC. All rights reserved. New Holland and CNH Capital
are registered trademarks of CNH America LLC. Any trademarks referred to
herein, in association with goods and/or services of companies other than CNH
America LLC, are the property of those respective companies.
Safety begins with a thorough understanding
of the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating decals
and never operate machinery without
all shields, protective devices and
structures in place.
NH31208520 • 02137.5 • SG • PRINTED IN U.S.A.