TABLE-OF-CONTENTS
Pressure Calibrations
InnoCal performs NIST-traceable pressure and vacuum
calibrations on absolute-, atmospheric-, and gauge-pressure
vacuum or pressure gauges, transducers, and barometers.
Testing range from 30" Hg to 20,000 psi at uncertainties as low
as 0 to 5000 psi: (K=2) ±0.005 psi + 0.00019% psi
 Vacuum from 0 to 29.2" Hg: (K=2) ±0.0009" Hg + 0.001%
 Barometric pressure from 700 to 1100 mBar: (K=2) ±0.11 mbar

Flowmeter Calibrations
Our computerized, automated standards allow us to perform
NIST-traceable mass and correlated flow measurements, using
air or nitrogen gas. When correlation to other gases is needed,
our metrologists will provide you with correlated data or a gas
correlation table.
NIST-traceable report for:
Catalog number
Pressure/vacuum gauge; 1, 2, or 3% accuracy.
TW-17040-10
Five test points across range 0 to 20,000 psi, 0 to 29.2" Hg
Pressure/vacuum gauge; better than 1% accuracy.
TW-17040-12
Five test points across range 0 to 20,000 psi, 0 to 29.2" Hg
Barometer/barograph. Three test points across range (700 to
TW-17040-30
1100 mbar); one temperature test point at ambient (22 to 5°C)
TW-17090-26
Fluke 700-series pressure module
TW-17090-27
Pressure comparator
TW-17090-29
Pressure transmitter
TW-17002-15
Process calibrator, high accuracy; up to 5000 psig
TW-17101-78
Process calibrator, low accuracy, handheld
TW-17090-31
Low-pressure manometer
TW-17101-09
Dead weight tester, single column; 0.1% accuracy
TW-17101-10
Dead weight tester, single column; 0.05% accuracy
TW-17101-11
Dead weight tester, single column; 0.015% accuracy
TW-17101-12
Dead weight tester, dual column; 0.1% accuracy
TW-17101-13
Dead weight tester, dual column; 0.05% accuracy
TW-17101-14
Dead weight tester, dual column; 0.015% accuracy
TW-17101-15
Dead weight tester; >0.015% accuracy
TW-17101-83
Dead weight tester, pneumatic, 0.1%
TW-17101-84
Dead weight tester, pneumatic; 0.05%
Dead weight tester, pneumatic; 0.015%
TW-17101-85
Catalog number
Flowmeter, air/gas. Five to seven test points across
range 0.2 to 80,000 sccm (0.002 to 80 L/min).
Flowmeter, gas mass. Five to seven test points across
range 0.2 to 80,000 sccm (0.002 to 80 L/min).
Flowmeter, liquid. 1 ccm to 300 L/min water
(can correct for other fluids).
Price
TW-17080-00
TW-17080-10
TW-17080-12
Dimensional
Calibrations
NIST-traceable report for:
Dimensional instrument,
miscellaneous
Protractor or angle meter
Micrometer or caliper,
up to 12 inches
Micrometer or caliper,
from 12 to 24 inches
Height gage, 0 to 24 inches
Gage block, up to 6 inches
(priced per block)
Steel ruler, up to 24 inches
Ultrasonic thickness gauge
Coating thickness gauge
202
Catalog number
TW-17050-11
TW-17100-44
TW-17050-12
TW-17050-13
TW-17050-14
TW-17050-15
Catalog number
Cap closure calibrator
TW-17080-15
Precision torque tester, 100 oz-in maximum
TW-17101-40
Precision torque tester, 100 lb-in maximum
TW-17101-86
Precision torque tester, 500 lb-ft maximum
TW-17101-87
Precision torque tester, 1000 lb-ft maximum
TW-17101-88
Torque screwdriver/watch, to 50 in-lb
TW-17100-40
Torque wrench, dial type, up to 250 lb-in, 2%
TW-17101-39
Torque wrench, dial type, up to 1200 lb-in, 2%
TW-17101-89
Torque wrench, dial type, up to 600 lb-ft, 2%
TW-17101-90
Torque wrench, dial type, up to 1000 lb-ft, 2%
TW-17101-91
Torque wrench, click type, up to 250 lb-in, 4%
TW-17101-92
Torque wrench, click type, up to 1200 lb-in, 4%
TW-17101-93
Torque wrench, click type, up to 600 lb-ft, 4%
TW-17101-94
Torque wrench, click type, up to 1000 lb-ft, 4%
TW-17101-95
Torque wrench, dial or click type, up to 2000 lb-ft, 2%
TW-17101-96
Price
Torque
Calibrations
NIST-traceable report for:
NIST-traceable report for:
Price
Force Calibrations
NIST-traceable report for:
Force gauge, up to 250 lb
Force gauge, up to 500 lb
Load cells with data
up to 1000 lb
Scale, all types
Catalog number
TW-17080-16
TW-17101-37
TW-17101-38
TW-17101-52
TW-17050-16
TW-17101-68
TW-17101-69
US Toll-free: 800-323-4340
•
Outside the US: 1-847-549-7600
•
www.coleparmer.com
Canada 800-363-5900 • India 91-22-6716-2222 • UK 0500-345-300
Price
Price