1. technology and computing
2. computer certification

Troubleshooting
5 YEAR RESIDENTIAL
WARRANTY
PROBLEM:
SOLUTION:
Fan not blowing air.
• Check inside “set” temp also check
outside temp and attic temp.
• Note if temp is more than a 10 degrees
variant (between set temp and outdoor
or attic) the aspen will stop until such
time the air falls within 10 degrees.
V E N T I L AT I O N S Y S T E M S
Fan blowing cold air or hot air when not • The aspen will find the closest warmest
wanted.
or coolest air it can find according
to “set” temp within 10 degrees
difference.
• You can alter the parameter of the “10”
degree value between 2-10 degrees.
• Push mode for 6 seconds, display will
beep press “set” until parameter 2
is displayed, press mode button and
use arrow keys to set desired value of
degree variant.
• Replicate the same procedure for
parameter 3 as above.
• *Parameter 2 and 3 sets the
temperature difference between set
temp and incoming temp.
Display not lit up.
• Check fuse at main power/fuse board.
www.aspenvs.co.nz
0800 85 40 85
Aspen NZ Ltd known as Aspen, guarantees that should a defect in this product due to
either faulty materials or workmanship in manufacturing become apparent within the
period of 60 months from the date of original purchase of the product such a defect
will be rectified without cost to you, for either labour or materials when used under
normal use & care in the opinion of Aspen NZ Ltd, in residential applications.
V E N T I L AT I O N S Y S T E M S
Instruction booklet
Model VS Series
The term “Residential Applications” includes houses, units, flats, but does not include
any transportable dwelling, commercial premises, hotels or motels.
Commercial applications attract a 36 month warranty.
Condition of warranty period: All Aspen units require “annual maintenance and filter
changes”, these services must be completed by authorised Aspen service person.
Aspen units carry an onsite warranty within 30 km of a metropolitan area, outside these
areas an “additional charge may apply”
Warranty is subject to:
• The Aspen unit installed according to our installation instructions
• The Aspen unit must be in a serviceable area
• The warranty is applicable for the original installation only
• Purchaser must keep receipt as proof of purchase in order to make warranty claim
The foregoing warranty does not apply:
* Please note your Aspen ventilator is not a heating or cooling system it can only draw cool
or warm air where available.
For any further clarification or information please visit the www.aspenvs.co.nz website or call
us on 0800 85 40 85.
• If the Aspen unit is moved repositioned or altered in any shape or form from its
original position
• If the Aspen unit has been subject to misuse, modifications, vandalism, power
surges, animal or insect damage, act of god, including earthquakes, fire, flood or
lightning damage.
38A Allens Road, East Tamaki, Auckland.
0800 85 40 85 [email protected] aspenvs.co.nz
V E N T I L AT I O N S Y S T E M S
Breathe the Aspen Difference
P-HEAT
P-HEAT
HUMI.
1
R-HEAT REMO
ASPEN
Controller
2 Operation
CO2
COMM
3
ASPEN Controller Operation
ASPEN Controller Operation
ON/OFF BUTTON
Touch once to turn the Aspen ventilator on. Touch again to turn off.
HUMI.
P-HEAT
1
2
R-HEAT REMO
CO2
COMM
1
2
3
3
15
4
5
6
11
9
8
1. ON/OFF button
Press ON/OFF button to turn on/off the ventilator
P-HEAT
Getting to know your controller
1. Fan speed
7. Set button
2. Temperature type
8. Down button
3. Temperature display
9. Up button
4. Day
10. Mode button
5. Clock
11. On/off button
6. Weekly timer on/off
12. Communication
HUMI.
CO2
COMM
HUMI.
1
REMO
2
COMM
3
1
HUMI. 2
P-HEAT
CO2
COMM
3
P-HEAT
HUMI.
R-HEAT REMO
(displays current temperature outside the house)
TA TEMP = Temperature in attic/ceiling
(displays current temperature
insidebutton
attic/loft)
1. ON/OFF
HUMI.
R-HEAT REMO
CO2
COMM
Press ON/OFF button to turn on/off the ventilator
HUMI.
1 R-HEAT REMO
2
3
CO2
to
COMM
DAY 1DISPLAY
2 the current day.
Shows
3
CLOCK
Shows current time. For further information and instructions please refer to
full manual
www.aspenvs.co.nz/manualvs
ON/OFF
button
1.
Press ON/OFF button to turn on/off the ventilator
HUMI.
1
Press /scroll through the MODE button and the control panel will display: 2
CO2
COMM
OA TEMP = Outside air temperature
3
TEMPERATURE TYPE
7
10
CO2
P-HEAT
R-HEAT REMO
COMM
Touch the FAN BUTTON three times and the Aspen will be in “Auto mode”,
this means the ventilator will automatically adjust fan speed where necessary.
R-HEAT REMO
R-HEAT
P-HEAT
CO2
Press the UP or DOWN ARROW KEYS
increase /decrease fan speed.
P-HEAT
P-HEAT
Then touch the UP or DOWN ARROW KEYS
to set the desired temperature.
1. ON/OFF button
Press ON/OFF button to turn on/off the ventilator
12
1
2
3
Tap the MODE button several times until you see this symbol:
14
13
HUMI.
SETTING THE DESIRED TEMPERATURE
R-HEAT REMO
MODE
CO2
COMM
1
2
3
R-HEAT REMO
FAN SPEED
Please note your Aspen ventilator is preset, which means it will automatically
work the way it is supposed to, for instance if you set the temperature to
21 degrees inside the house, the Aspen will automatically try and locate
the closest air source/supply to that temperature (outside or inside).
P-HEAT
16
HUMI.
1
2
3
WEEKLY TIMER
The user can set a weekly schedule on the Aspen ventilator. Please refer to
full manual at www.aspenvs.co.nz/manualvs
SET BUTTON
Used for programming day/time. For further information and instructions
please refer to full manual www.aspenvs.co.nz/manualvs
FILTER ALARM
RA TEMP= Displays current indoor temp
Filter alarm will show after 300 days of usage. Please contact Aspen NZ for
1 1. ON/OFF
button
V
R-HEAT REMO
a full filter change Ventilator
on 0800 85off
40 85.
Ventilator on 1. ON/OFF button
Ventilator off 2 Press ON/OFF button to turn on/off the ventilator
HUMI.
P-HEAT
CO2
Please note the “set” temp and RA temp are different.
COMM
3
1 ventilator ON, backlit LCD display lights up, without operation for 30 sec
1. ON/OFF button Press ON/OFF button to turn on/off the ventilator
When
When ventilator ON, backlit LCD display lights up, without operation for
30 seconds,
offto turn on/off the ventilator
TRIANGLE/Y DUCT ON/OFF
R-HEAT REMO
Press
ON/OFFlights
button
2 ventilator OFF, lights off
When
Please note the Aspen ventilator will draw the nearest air source
When triangle is displayed the aspen ventilator is drawing air from outside
When ventilator OFF, lights off
CO2
COMM
3
available within 10 degrees of your desired temp. If the supply air source
13. Filter alarm
P-HEAT HUMI.
2. Mode
button
falls outside the 10 degree limit the fan will stop supplying air.
REPAIR
2. Mode
14. Y duct
on/off button
Ventilator
on 1
Ventilator off
Press
Mode
to display
If symbolbutton
is showing
please different
contact ustemperatures
on 0800 85 40 85
REMO
Press
R-HEAT
1. ON/OFF
button
When ventilator
ON, backlit LCD display lights up, without
operation for
30 seconds, lights off
15. Auto
modeMode button to display different temperatures
2
Used
as
the
parameters
setting
button
1.
ON/OFF
button
For
example
if
your
indoor
set
temperature
is
22
degrees
and
outside
it
When
ventilator
OFF,
lights
off
Press ON/OFF button to turn on/off the ventilator
Used as theVentilator
parameters
Ventilator
on
16. Repair
offsetting button
CO2
PressFor
Mode
button
for short
RA-OA-Tr-TA temperature
is 32 degrees
+ during
summer
the to
Aspen
will
stopthe
untilventilator
the temperature
Press
ON/OFF
button
turn
on/off
COMM
full manual
refertotodisplay
www.aspenvs.co.nz/manualvs
3 please
Press Mode button for short to display RA-OA-Tr-TA
temperature
2. Mode button
outside drops to within 10 degrees of the set Press
temp.
Mode button to display different temperatures
Aspen NZ reserves the right to alter and change or modify any of the content
When ventilator ON, backlit LCD display lights up, without operation for 30 seconds, lights offUsed as the parameters setting button
contained in this manual or online without any prior notification.
Press Mode button for short to display RA-OA-Tr-TA temperature
When ventilator OFF, lights off
Ventilator on
Ventilator off
Ventilator on
2. Mode button
Ventilator off
When ventilator ON, backlit LCD display lights up, without
operation
Ventilator on
Ventilator
off for 30 seconds, lights off
Press Mode button to display different temperatures
When ventilator ON, backlit LCD display lights up, without operation for 30 seconds, lights off
When ventilator OFF, lights off
Used as the parameters setting button
When
ventilator
ON,
backlit
LCD display
lightsoff
up, without
operation
for 30 seconds, lights off
When
ventilator
OFF, lights
HUMI.
P-HEAT
Press Mode button for short to display RA-OA-Tr-TA temperature
4
1
When
ventilator
OFF,
lights
off
V E N T I L AT I O N S Y S T E M S
V E N T I L AT I O N S Y S T E M S
V4E N T I L AT I O N
2. Mode
button 4 button
1. ON/OFF
1. ON/OFF button
REMO
R-HEAT
Ventilator
on
Ventilator
off
Press Mode button to display different temperatures 2. Mode button
SYSTEMS