1. No category

PROJECT NAME: ___________________________________
TYPE: ________
ATEX INTERIOR ACCENT LIGHTING SERIES
SHAPE
DESCRIPTION
Shape provides highly flexible LED lighting
strands for architectural and contour lighting applications. Shape’s proprietary fixture
design flexes at each node providing dynamic shaped lighting for unique applications.
Shape is available in a variety of LED colors
and Kelvins along with a full line of accessories such as straight and flexible mounting
channels.
KEY FEATURES AND BENEFITS
• Construction: LEDs sealed in silicone rubber.
Mounting channels are available in aluminum
or UV stabilized polycarbonate.
ORDERING
• Installation: See ACCESSORIES for options on
straight and flexible mounting channels.
SHA
• Environment: Interior, dry location use only.
• Operating Temperature: -10° to 60° C (14° to
140° F)
• Bending Radius: 45° horizontal and 10° vertical maximum
• Power and Control: DMX-512, on/off, and dimming control options. See POWER AND CONTROL data sheets or contact factory for more
information.
-
1
PRODUCT
1
I
-
2
ENVIRONMENT
PRODUCT
3
LED COLOR
4
SHA Shape
2
ENVIRONMENT
I Interior
PL
4
OUTPUT
-
0965
5
LENGTH
OUTPUT
PL Plus (10 mm pitch)
5
LENGTH
0965 965 mm (38 in). See
DRAWINGS.
PRODUCT SPECIFICATIONS
3
LEDS 96/m
LED COLOR
LED PITCH 10 mm (3/8 in)
2000K 2000K
2000K 223 lms/m
2800K 2800K
2800K 180 lms/m
6000K 6000K
6000K 245 lms/m
RED Red
RED AND BLUE Contact factory
BLUE Blue
INPUT 12VDC
WATTS 6 W/m
WIDTH 8 mm (5/16 in)
HEIGHT 16.6 mm (11/16 in)
LENGTH 965 mm (38 in)
WEIGHT 100 g (3.5 oz) per meter
BEAM ANGLE 50°. See PHOTOMETRICS.
TRIM POINTS RED: Every four LEDs. ALL OTHER
COLORS: Every three LEDs. See
INSTALLATION.
www.atexlightingsolutions.com
Copyright © 2015. Atex Lighting Solutions, a brand of Atex Co., Ltd. All rights reserved.
Specifications subject to change. Visit www.atexlightingsolutions.com for the most current product data. 042115-1.
Page 3
ATEX INTERIOR ACCENT LIGHTING SERIES
PROJECT NAME: ___________________________________
TYPE: ________
SHAPE
8m
m
(5
/1
6
in
)
DIMENSIONS
130 mm (5-3/16 in)
Ø
3.5 mm
(1/8 in)
130 mm (5-3/16 in)
10 mm
(3/8 in)
965 mm (38 in)
16.6 mm
(11/16 in)
ACCESSORIES
ALUMINUM F CHANNEL
ALUMINUM C CHANNEL
SHA-AC-CHN-ALMC-STR
Rigid channel for straight line
installations.
SHA-AC-CHN-ALMF-STR
Rigid channel for straight line
installations.
SHA-AC-CHN-ALMC-FLX
Flexible channel for maintaining
installations with curves.
SHA-AC-CHN-ALMF-FLX
Flexible channel for maintaining
installations with curves.
W x H x L: 10 x 10.5 x 1000 mm (3/8 x 3/8 x 39-5/16 in)
POLYCARBONATE F CHANNELS
W x H x L: 20 x 18.5 x 1000 mm (13/16 x 11/16 x 39-5/16 in)
SPRING BRACKET TOOL
SHA-AC-CHN-RESF-STR
Rigid channel for straight line
installations.
This tool inserts spring clips to secure Shape Series lighting into C or
F aluminum channels. See INSTALLATION.
SHA-AC-TOL
Spring insertion and securing tool.
SHA-AC-CHN-RESF-FLX
Flexible channel for maintaining
installations with curves.
SHA-AC-BRK
Secures light strip to aluminum
channel. (Qty: 100 clips.)
W x H x L: 20 x 11 x 970 mm (3/4 x 7/16 x 38-3/16 in)
Page 4
www.atexlightingsolutions.com
Copyright © 2015. Atex Lighting Solutions, a brand of Atex Co., Ltd. All rights reserved.
Specifications subject to change. Visit www.atexlightingsolutions.com for the most current product data. 042115-1.
PROJECT NAME: ___________________________________
TYPE: ________
ATEX INTERIOR ACCENT LIGHTING SERIES
SHAPE
PHOTOMETRICS
PART NO. SHA-I-2000K-PL-0965
CANDELA DISTRIBUTION
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
90°
PART NO. SHA-I-2800K-PL-0975
CANDELA DISTRIBUTION
POLAR DISTRIBUTION
0° 22.5° 45° 67.5° 90°
260 260 260 260 260
258 257 256 255 255
211 209 212 213 212
101 103 109 115 116
38
41
43
45
45
17
22
24
24
26
7
13
15
17
17
4
7
10
11
11
4
4
7
8
8
0
3
5
6
6
0
4
4
4
4
0° to 180°
90° to 270°
ZONAL LUMEN SUMMARY
0-10
10-20
20-30
30-40
40-50
50-60
Lumens
24.0
57.7
50.6
28.4
17.8
12.8
0° 22.5° 45° 67.5° 90°
0° 134 134 134 134 134
5° 135 135 132 128 126
15° 113 113 111 108 107
25° 81
80
80
79
79
35° 44
44
45
45
45
45° 23
25
25
26
26
55° 7
16
17
17
17
65° 5
9
12
12
12
75° 3
5
8
8
8
85° 1
4
6
6
6
90° 0
3
5
5
5
0° to 180°
90° to 270°
ZONAL LUMEN SUMMARY
60-70
70-80
80-90
90-100
100-110
110-120
Lumens
9.0
6.6
4.6
3.3
2.8
2.4
120-130
130-140
140-150
150-160
160-170
170-180
Lumens
1.9
1.0
0.3
0.2
0.1
0.1
0-10
10-20
20-30
30-40
40-50
50-60
Lumens
3.2
23.0
35.6
34.1
24.6
17.0
CANDELA DISTRIBUTION
POLAR DISTRIBUTION
0° 22.5° 45° 67.5° 90°
202 202 202 202 202
208 207 202 194 192
171 172 171 165 163
111 112 113 113 113
56
57
58
59
58
29
31
32
32
31
10
19
20
20
20
6
11
13
13
13
4
7
9
9
9
2
5
7
7
7
0
4
6
6
6
0° to 180°
Lumens
60-70 12.3
70-80 8.8
80-90 8.6
90-100 2.0
100-110 3.4
110-120 2.8
120-130
130-140
140-150
150-160
160-170
170-180
Lumens
2.0
1.4
0.8
0.4
0.2
0.1
Lumen output based on IESNA LM-79-08.
Test results are for a 1M strand with 96 LEDs.
Download IES files at atexlightingsolutions.com.
PART NO. SHA-I-6000K-PL-0965
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
90°
POLAR DISTRIBUTION
90° to 270°
ZONAL LUMEN SUMMARY
0-10
10-20
20-30
30-40
40-50
50-60
Lumens
4.8
35.1
52.7
46.6
31.3
20.9
Lumens
60-70 14.3
70-80 10.0
80-90 10.3
90-100 2.5
100-110 4.5
110-120 3.7
120-130
130-140
140-150
150-160
160-170
170-180
Lumens
3.0
2.2
1.3
0.7
0.4
0.2
www.atexlightingsolutions.com
Copyright © 2015. Atex Lighting Solutions, a brand of Atex Co., Ltd. All rights reserved.
Specifications subject to change. Visit www.atexlightingsolutions.com for the most current product data. 042115-1.
Page 5
ATEX INTERIOR ACCENT LIGHTING SERIES
PROJECT NAME: ___________________________________
TYPE: ________
SHAPE
SYSTEM DIAGRAMS
See POWER AND CONTROL data sheet for more information.
POWER ON/OFF WITH DIMMING POWER SUPPLY
120/240VAC
12VDC
Power supply
Three (3) Shape Series strands maximum per run
DMX SYSTEM INTEGRATION
GENERAL TIPS FOR CONSISTENT OUTPUT
Make branch cables a similar length.
Third party (supplied by others)
DMX Show
Designer (PC)
DMX Show
Player
Study lighting plan for strategic areas to distribute power evenly
across your project environment.
DMX signal via
PC or Player
Atex DMX
Signal Receiver
Power (+)
Power Supply
12VDC
Power (-)
(+)
Blue (-)
Green (-)
Red (-)
Add power supplies where needed to evenly distribute power.
100W maximum
per DMX Signal Receiver
Enlarge wire sizes from A to B to C to D. (See section on
Power Supplies and Recommended Run Lengths.)
Page 6
www.atexlightingsolutions.com
Copyright © 2015. Atex Lighting Solutions, a brand of Atex Co., Ltd. All rights reserved.
Specifications subject to change. Visit www.atexlightingsolutions.com for the most current product data. 042115-1.
PROJECT NAME: ___________________________________
TYPE: ________
ATEX INTERIOR ACCENT LIGHTING SERIES
SHAPE
INSTALLATION
POWER SUPPLIES AND RECOMMENDED RUN LENGTHS
Shape light strands operate on 12VDC. A single strand consumes 6W and up
to three (3) strands can be connected on a single run. Select an appropriate
power supply to properly power the total wattage of connected Shape strands.
To avoid voltage drop, please consult the following table for our maximum
recommended run lengths from power supply to the end of the run based
on the size of the cable from the power supply to the first Shape Series strand.
Total run length = Lead cable + Shape Series light strands
Power supply
CUTTING
Shape light strands can be shortened in the field if necessary. Using a
sharp pair of wire snips, strands with white and blue LEDs can be cut
from the end after every third LED (3 LEDs from the end, 6 LEDs from
the end, 9 LEDs from the end, and so on). Strands with red LEDs can be
cut from the end after every fourth LED (4 LEDs from the end, 8 LEDs
from the end, 12 LEDs from the end, and so on). Apply silicon adhesive
to the cut end of the strand to make it watertight and insulated.
WARNING: Trimmed LEDs cannot be re-attached.
Cut strand from end after every third LED
ONE (1) STRAND
SQ MM AWG Meters
TWO (2) STRANDS
Feet
SQ MM AWG Meters
THREE (3) STRANDS
Feet
SQ MM AWG Meters
Feet
0.5
20
25
82
0.5
20
12
39
0.5
20
8
26
0.75
18
35
115
0.75
18
18
59
0.75
18
12
39
1.25
16
60
197
1.25
16
32
105
1.25
16
20
66
2
14
95
312
2
14
50
164
2
14
30
98
3.5
12
160
525
3.5
12
80
262
3.5
12
50
164
5.5
10
250
820
5.5
10
140
459
5.5
10
90
295
WIRING CONNECTIONS
Shape light strands are connected (maximum three in a series) by the
lead wires (black to black, red to red) on the ends of each strand. Connect
the branch cable from the power supply to the appropriate wires (black
(-) to negative and red (+) to positive using code compliant wiring
method such as wire nuts or shrink wrap within optional contractor
provided junction box.
Apply silicone adhesive to cut end
Branch cable and strand connections:
Red wire (+) positive.
Black wire (-) negative.
Apply silicone to
wire connectors
STRAND INSTALLATION
After making all wiring connections for your run, install the aluminum or polycarbonate channel using flat head screws in the provided mounting holes
in the channel to properly secure it to your surface. (Double-sided tape may additionally be used to help position and adjust the channel before securing it.) Position the Shape strand over the channel and apply even pressure to secure the LEDs into trough. DO NOT FORCE LEDs INTO CHANNEL OR
CIRCUITS MAY BE DAMAGED. Secure the strand with the Spring Bracket Tool and springs (see ACCESSORIES).
Channel secured with screws.
Adhesive may also be used.
Apply pressure evenly. DO NOT FORCE.
Bracket Spring Tool (SHA-AC-TOL)
Spring clips (SHA-AC-BRK)
Leave 5 to 10 mm
(3/16 to 3/8 in)
between channels
Mounting surface
Spring clips (ATEX-SHA-ACC-AC-CLIPS)
www.atexlightingsolutions.com
Copyright © 2015. Atex Lighting Solutions, a brand of Atex Co., Ltd. All rights reserved.
Specifications subject to change. Visit www.atexlightingsolutions.com for the most current product data. 042115-1.
Page 7