PROJECT NAME: ___________________________________
TYPE: ________
ATEX INTERIOR ACCENT LIGHTING SERIES
COVE LIGHT
DESCRIPTION
Atex Cove Light is a sleek, low profile fixture
that cleanly installs in virtually any soffit,
cove, or niche. Available in two lengths and
three color temperatures, the Cove Light uses
very little energy to apply smooth indirect
lighting effects where many traditional lighting sources cannot fit.
KEY FEATURES AND BENEFITS
• Construction: Aluminum housing with integrated polycarbonate matte lens
• Installation: Adhesive tape. See ACCESSORIES
for options on mounting brackets.
ORDERING
COV
-
1
PRODUCT
1
• Environment: Interior, dry location use only.
I
-
-
2
ENVIRONMENT
3
LED COLOR
PRODUCT
5
COV Cove Light
4
OUTPUT
5
LENGTH
LENGTH
0495 495 mm (19-1/2 in)
0979 979 mm (38-9/16 in)
2
• Operating Temperature: -10° to 55° C (14° to
131° F)
• Power and Control: DMX-512, on/off, and dimming control options. See POWER AND CONTROL data sheets or contact factory for more
information.
PRODUCT SPECIFICATIONS
ENVIRONMENT
LENGTH
I Interior
3
495 mm (19-1/2 in)
979 mm (38-9/16 in)
2700K
3000K
480 lms
Contact factory
960 lms
Contact factory
LED COLOR
4000K
510 lms
1,020 lms
2700K 2700K
WATTS
6W
12 W
WEIGHT
120 g (4.2 oz)
240 g (8.5 oz)
3000K 3000K
LED PITCH
4000K 4000K
4
OUTPUT
LT Lite (17.3 mm or 11/16 in
pitch)
17.3 mm (11/16 in)
INPUT
24VDC all models
WIDTH
Fixture: 21 mm (13/16 in)
Fixture and Bracket: 38 mm (1/2 in)
HEIGHT
Fixture: 19 mm (3/4 in)
Fixture and Bracket: 25 mm (1 in)
BEAM ANGLE
120°. See PHOTOMETRICS.
www.atexlightingsolutions.com
Copyright © 2015. Atex Lighting Solutions, a brand of Atex Co., Ltd. All rights reserved.
Specifications subject to change. Visit www.atexlightingsolutions.com for the most current product data. 042115-1.
Page 35
ATEX INTERIOR ACCENT LIGHTING SERIES
PROJECT NAME: ___________________________________
TYPE: ________
COVE LIGHT
ALL MODELS
DIMENSIONS
TOP VIEW
END VIEWS
Optional mounting brackets
21 mm (13/16 in)
21 mm
(13/16 in)
25 mm
(1 in)
Optional
mounting
bracket
495 mm (19-1/2 in) or 979 mm (38-9/16 in)
38 mm
(1/2 in)
SIDE VIEW
Optional mounting brackets
19 mm (3/4 in)
With tape mount and/or
ears of optional mounting bracket removed. See
INSTALLATION.
56 mm (2-3/16 in)
PHOTOMETRICS
PART NO. COV-I-2700K-LT-0979
CANDELA DISTRIBUTION
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
90°
0°
323
322
307
277
237
189
139
91
46
9
1
PART NO. COV-I-4000K-LT-0979
CANDELA DISTRIBUTION
POLAR DISTRIBUTION
45°
323
321
307
280
244
200
154
109
71
40
28
90°
323
319
306
281
248
207
164
122
85
54
41
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
90°
0° to 180°
ZONAL LUMEN SUMMARY
0-10
10-20
20-30
30-40
40-50
50-60
Lumens
30.5
86.7
129.4
152.6
154.5
137.7
Page 36
0°
341
339
323
291
248
198
145
93
46
8
1
POLAR DISTRIBUTION
45°
341
339
325
298
259
213
164
118
76
43
30
90°
341
338
326
301
267
225
180
135
95
61
47
0° to 180°
ZONAL LUMEN SUMMARY
60-70
70-80
80-90
90-100
100-110
110-120
Lumens
108.4
73.6
41.1
19.6
6.7
1.7
120-130
130-140
140-150
150-160
160-170
170-180
Lumens
0.6
0.3
0.2
0.1
0.1
0.0
0-10
10-20
20-30
30-40
40-50
50-60
Lumens
32.2
91.6
136.8
161.6
163.7
146.0
60-70
70-80
80-90
90-100
100-110
110-120
www.atexlightingsolutions.com
Copyright © 2015. Atex Lighting Solutions, a brand of Atex Co., Ltd. All rights reserved.
Specifications subject to change. Visit www.atexlightingsolutions.com for the most current product data. 042115-1.
Lumens
115.0
77.9
43.2
20.3
6.5
1.4
120-130
130-140
140-150
150-160
160-170
170-180
Lumens
0.5
0.3
0.2
0.1
0.1
0.0
PROJECT NAME: ___________________________________
TYPE: ________
ATEX INTERIOR ACCENT LIGHTING SERIES
COVE LIGHT
ALL MODELS
ACCESSORIES
MOUNTING BRACKET
TAIL CONNECTOR
COV-AC-BRK-RES
Adjustable 180°. Polycarbonate. Two included with fixture. Mount with screws
(provided by others) into surfaces.
COV-AC-CBL
Tail connector for connecting
fixtures to a power supply or contractor provided cable. White or red
cable is (+) positive. Black cable is
(-) negative.
SYSTEM DIAGRAM
6 m (236-1/4 in) maximum single run length
Connect run to 24VDC power supply using tail connector (Part No. COV-AC-CBL).
See POWER AND CONTROL
data sheet for power supply
information and DMX system integration.
INSTALLATION
! WARNINGS AND PRECAUTIONS
Disconnect all power before installing products.
If using tape to install product, be sure surface is free of
dust, oils, or moisture that might interfere with adhesive.
Adhesive tape is intended for permanent installation and
might damage surface if removed.
Leave slack in wires between connected fixtures. Do not
stress or place tension on connectors or wires entering the
fixtures.
When connecting tail wire to power supply or branch cable (supplied by others), be sure to connect red or white
wire to positive (+) and black wire to negative (-). Miswiring can damage product and void warranty.
Allow for air flow between fixture and surrounding walls
or other building materials. Ambient temperatures must
remain between -10° and 55° C (14° and 131° F).
BRACKET • MOUNTING EARS
Position fixture in desired location in your project environment. Locate adhesive tape on back of fixture and mark
spots on surface. Center brackets on marks and secure to
the surface with screws (provided by others). Peel backing
from back of adhesive. Center adhesive over bracket. Apply
even pressure on fixture until it snaps into bracket and top
latches secure fixture in place.
BRACKET • LINEAR MOUNTING
The mounting ears on the bracket can be removed with
wire snips or sharp scissors if necessary. With the ears removed, the bracket can be secured to the mounting surface
through the screw holes provided in the center. NOTE: The
center adjustable piece of the bracket can be rotated to
its limit in one direction and slid out of the base to give
you more room to install the bracket if required. Reverse
the process to re-insert the adjustable piece into the bracket.
TAPE MOUNTING
Position fixture in desired location in your project environment. Locate adhesive tape on back of fixture. Peel off
backing of adhesive. Apply even pressure on fixture to
secure it to the mounting surface.
VERTICAL MOUNTING
Use an L-shaped bracket (supplied by others) to secure fixtures to
a wall.
www.atexlightingsolutions.com
Copyright © 2015. Atex Lighting Solutions, a brand of Atex Co., Ltd. All rights reserved.
Specifications subject to change. Visit www.atexlightingsolutions.com for the most current product data. 042115-1.
Page 37