1. No category

CONTENTS
Fiber Optic
Fiber Optic ..................................................................................................................... 3
Fiber Optic Patchcord ..................................................................................................... 8
PATCH PANEL ................................................................................................................. 9
Fiber Ring Data Modem .................................................................................................. 11
Ethernet Optic Modem ................................................................................................... 12
Serial Optic Modem ........................................................................................................ 13
Video Balun With Flip-Top IDC Connector ....................................................................... 14
IP Cabling Transmission
IP Power ......................................................................................................................... 15
IP Extender ..................................................................................................................... 18
SP Series
For Fixed CCD Camera ..................................................................................................... 16
For PTZ / Dome Camera ................................................................................................... 17
HDMI CAT5 Extender
HDMI CAT5 Extender ....................................................................................................... 19
Twisted Pair Transmission
Transceiver
Passive ( Single Channel , 4 Channel) .......................................................................... 20
Active ( Single Channel , 4 Channel) ...........................................................................25
Panel (Multi Channel in 1U rack mounting panel) .......................................................... 26
Rack
(3U Rack Mounting)..............................................................................................30
Cable Hub .......................................................................................................................31
UTP Video Distributor ......................................................................................................32
CAT5 VGA Transmission
VGA, Keyboard Mouse, USB Extender ..............................................................................33
CAT5 VGA Distributor ......................................................................................................37
Video to VGA Converter ..................................................................................................38
Audio Transmission
Audio Box .......................................................................................................................40
CAT5 Audio & Video Extender .........................................................................................40
AV Distribution Amplifier .................................................................................................41
* Specification subject to change without notice.
CONTENTS
Data Transmission
PTZ Receiver ...................................................................................................................42
RS232/485/422 Converter, Repeater, Extender ................................................................42
RS485 Distributor ........................................................................................................... 43
Coaxial Cabling Transmission
Video Distributor
Video Distribution Amplifier ........................................................................................... 45
Video Amplifier .............................................................................................................. 47
Surge Protector
Video Distribution Amplifier ........................................................................................... 48
Solution Provider For Video Interference
Video Ground Loop Isolator ............................................................................................51
Video Transformer Filter ..................................................................................................52
High Frequency Interference Blocker ...............................................................................53
Power Center
Power Coverter ...............................................................................................................54
Rack Mounting Panel .......................................................................................................55
Wall Mounting Type ........................................................................................................56
Accessories
Wire (Cable) ................................................................................................................... 57
Tool ................................................................................................................................58
Parts ...............................................................................................................................59
Connector .......................................................................................................................60
Application Guide............................................................................................61
* Specification subject to change without notice.
Fiber Optic
FADS-100TR(1 VIDEO)
FADS-100TR-S
Outline Features
• One uncompressed digital video transmission over one
fiber
• Transmission distance is from 10 to 120 km for single
mode fiber
• Low noise and low bit error rate
• Small cross talk
• MTBF > 105 hrs
Functional Description
Based on an ITU standard frame, FADS-100TR (1 Video) series are significantly designed for fiber optic seamless
transmission over long distances. Following the Optic-in & Coaxial-out trend, the fiber optic transmission in CCTV surveillance
system can provide wide bandwidth advantage for video and map one uncompressed video into one fiber.
Naturally FADS-100TR series are fully capable of dual way for the video transmission, the most CCTV surveillance
application is transmitting one way video from the R to T site.
The transmitter of FADS-100R (camera side) converts one video into digital signals and maps it into a standard format
frame over a single fiber link to the receiver FADS-100T (monitor side) then returns the light into electrical analog video
signals.
Technical Specifications
Video signal specifications
Protocol:
Video bandwidth:
Bit error rate:
Video output voltage:
Video resolution:
DG:
DP:
SNR:
PAL, NTSC
8M Hz
<10-9
1 V P-P 75 Ω
8 Bit
<1.0%
<1.0°
>60 dB
Optical specification
Fiber type:
Distance:
Wavelength:
Minimal transmitted power:
Sensitivity:
Single mode
20 / 40 / 80 / 120 km
1310nm / 1550nm (DFB)
-15 / -5 / 0 dBm
-24 / -28 / -34 / -36 dBm
Product
Dimensions:
Weight:
Power:
LED indicators:
Capacity 100 × 101 ×26 mm (L×W×H)
340 g
12V DC, 1A
Power, Optic, Video
1 Uncompressed Video
Connectors and cables
Video:
Fiber connectors:
Single mode fiber:
BNC
SC, ST, FC
9/125 μm
Environment
Operating temperature:
Humidity:
Regulatory approval:
-20˚C~70˚C
0~95% (Non-condensing)
FCC, CE
* Specification subject to change without notice.
Fiber Optic
Fiber Optic
FADS-1XXTR(1VIDEO,1AUDIO,1DATA)
FADS-1XXTR-S
Outline Features
• One uncompressed digital video / audio / data
transmission over one fiber
• Bi-directional data transmission
• Bi-directional audio transmission
• Transmission distance is from 10 to 120 km for
single mode fiber
• Low noise and low bit error rate
• Small cross talk
• MTBF > 105 hrs
Functional Description
Based on an ITU standard frame, FADS-1XXTR (1 Video, 1 Audio & 1 Data) series are significantly designed for fiber optic
seamless transmission over long distances. Following the Optic-in & Coaxial-out trend, the fiber optic transmission in CCTV
surveillance system can provide wide bandwidth advantage for video and map one video, one audio and one data into one
fiber.
Naturally FADS-1XXTR series are fully capable of dual way transmissions for the video, audio and data, the most formal
CCTV surveillance application is transmitting one way video from the R to T site, one way RS422/485 data from the reverse
direction T to R to control the camera focusing character and dual way transmissions of audio.
The transmitter of FADS-1XX R (camera side) converts one video, one audio and one RS422/485 data into digital signals
and maps into a standard format frame over a single fiber link to the receiver FADS-1XXT (monitor side) then returns the light
into electrical analog video, audio and data signals.
Technical Specifications
Video signal specifications
Protocol:
Video bandwidth:
Bit error rate:
Video output voltage:
Video resolution:
DG:
DP:
SNR:
PAL, NTSC
8M Hz
<10-9
1 V P-P 75 Ω
8 Bit
<1.0%
<1.0°
>60 dB
Audio signal specifications
I/O Level:
Sampling frequency:
Audio resolution:
SNR:
typ.0 dBm
52.3K Hz
24 Bit
>75 dB
Data signal specifications
Signal:
Protocol:
Transmission speed:
Transmission Distance:
RS485, RS422 (optional)
Half-duplex (two wires)
115,200 bps
0~1200 m
Product
Dimensions:
Weight:
Power:
LED indicators:
Capacity 155 × 90 ×30 mm (L×W×H)
340 g
12V DC, 1A
Power, Optic, Video, Audio, Data
1 Video, 1 Audio, 1 Data
Connectors and cables
Data / Voice:
Fiber connectors:
Single mode fiber:
Pluggable jet
SC, ST, FC
9/125 μm
Environment
Operating temperature: -20˚C~70˚C
0~95% (Non-condensing)
Humidity:
Regulatory approval:
FCC, CE
Optical specification
Fiber type:
Single mode
Distance:
20 / 40 / 80 / 120 km
1310nm / 1550nm (DFB)
Wavelength:
Minimal transmitted power: -15 / -5 / 0 dBm
Sensitivity:
-24 / -28 / -34 / -36 dBm
Fiber Optic
* Specification subject to change without notice.
Fiber Optic
FADS-4XXTR(4VIDEO,4AUDIO,1DATA)
FADS-4XXTR-S
Outline Features
•
•
•
•
•
•
•
Four uncompressed digital video / audio / data transmissions over one fiber
Bi-directional data transmission
Bi-directional audio transmission
Transmission distance is from 10 to 120 km for single mode fiber
Low noise and low bit error rate
Small cross talk
MTBF > 105 hrs
Functional Description
Based on an ITU standard frame, FADS-4XXTR (4 Video, 4 Audio & 1 Data) series are significantly designed for fiber optic
seamless transmission over long distances. Following the Optic-in & Coaxial-out trend, the fiber optic transmission in CCTV
surveillance system can provide wide bandwidth advantage for video and map four videos, four audios and four data into one
fiber.
Naturally FADS-4XXTR series are fully capable of dual way transmissions for the video, audio and data, the most formal
CCTV surveillance application is transmitting one way four videos from the R to T site, one way one RS422/485 data from the
reverse direction T to R to control the camera focusing character and dual way transmissions of four audios.
The transmitter of FADS-4XXR (camera side) converts four videos, four audios and one RS422/485 data into digital signals
and maps into a standard format frame over a single fiber link to the receiver FADS-4XXT (monitor side) then returns the light
into electrical analog video, audio and data signals.
Technical Specifications
Video signal specifications
Protocol:
Video bandwidth:
Bit error rate:
Video output voltage:
Video resolution:
DG:
DP:
SNR:
PAL, NTSC
8M Hz
<10-9
1 V P-P 75 Ω
8 Bit
<1.0%
<1.0°
>60 dB
Audio signal specifications
I/O Level:
Sampling frequency:
Audio resolution:
SNR:
typ.0 dBm
52.3K Hz
24 Bit
>75 dB
Data signal specifications
Signal:
Protocol:
Transmission speed:
Transmission Distance:
RS485, RS422 (optional)
Half-duplex (two wires)
115,200 bps
0~1200 m
Product
Dimensions:
Weight:
Power:
LED indicators:
Capacity 155 × 190 ×48 mm (L×W×H)
850 g
12V DC, 2A
Power, Optic, Video, Audio, Data
4 Video, 4 Audio, 1 Data
Connectors and cables
Video:
Data / Voice:
Fiber connectors:
Multi mode fiber:
BNC
Pluggable jet
SC, ST, FC
50/125, 62.5/125 μm
Environment
Operating temperature: -20˚C~70˚C
0~95% (Non-condensing)
Humidity:
Regulatory approval:
FCC, CE
Optical specification
Fiber type:
Single mode
Distance:
20 / 40 / 80 / 120 km
1310nm / 1550nm (DFB)
Wavelength:
Minimal transmitted power: -15 / -5 / 0 dBm
Sensitivity:
-24 / -28 / -34 / -36 dBm
* Specification subject to change without notice.
Fiber Optic
Fiber Optic
FADS-401TR(4VIDEO,0AUDIO,1DATA)
Outline Features
•
•
•
•
•
•
•
Four uncompressed digital video / audio / data transmissions over one fiber
Bi-directional data transmission
Bi-directional audio transmission
Transmission distance is from 10 to 120 km for single mode fiber
Low noise and low bit error rate
Small cross talk
MTBF > 105 hrs
Functional Description
Based on an ITU standard frame, FADS-401TR (4 Video, 0 Audio & 1 Data) series are significantly designed for fiber optic
seamless transmission over long distances. Following the Optic-in & Coaxial-out trend, the fiber optic transmission in CCTV
surveillance system can provide wide bandwidth advantage for video and map four videos, four audios and four data into one
fiber.
Naturally FADS-401TR series are fully capable of dual way transmissions for the video, audio and data, the most formal
CCTV surveillance application is transmitting one way four videos from the R to T site, one way one RS422/485 data from the
reverse direction T to R to control the camera focusing character.
The transmitter of FADS-401R (camera side) converts four videos and one RS422/485 data into digital signals and maps
into a standard format frame over a single fiber link to the receiver FADS-4XXT (monitor side) then returns the light into
electrical analog video, audio and data signals.
Technical Specifications
Video signal specifications
Protocol:
Video bandwidth:
Bit error rate:
Video output voltage:
Video resolution:
DG:
DP:
SNR:
PAL, NTSC
8M Hz
<10-9
1 V P-P 75 Ω
8 Bit
<1.0%
<1.0°
>60 dB
Data signal specifications
Signal:
Protocol:
Transmission speed:
Transmission Distance:
RS485, RS422 (optional)
Half-duplex (two wires)
115200 bps
0~1200 m
Optical specification
Fiber type:
Single mode
Distance:
20 / 40 / 80 / 120 km
1310nm / 1550nm (DFB)
Wavelength:
Minimal transmitted power: -15 / -5 / 0 dBm
Sensitivity:
-24 / -28 / -34 / -36 dBm
Fiber Optic
Product
Dimensions:
Weight:
Power:
LED indicators:
Capacity 155 × 190 ×48 mm (L×W×H)
850 g
12V DC, 2A
Power, Optic, Video, Data
4 Video, 0 Audio, 1 Data
Connectors and cables
Video:
Data / Voice:
Fiber connectors:
Single mode fiber:
Multimode fiber:
BNC
Pluggable jet
SC, ST, FC
9/125 μm
50/125, 62.5/125 μm
Environment
Operating temperature: -20˚C~70˚C
Humidity:
0~95% (Non-condensing)
Regulatory approval:
FCC, CE
* Specification subject to change without notice.
Fiber Optic
FADS-8XXTR(8VIDEO,1AUDIO,2DATA)
Outline Features
•
•
•
•
•
•
•
•
Eight uncompressed eight digital video / audio / data transmissions
over one fiber
Bi-directional data transmission
Bi-directional audio transmission
Transmission distance is from 10 to 80 km for single mode fiber
Low noise and low bit error rate
Small cross talk
MTBF > 105 hrs
Functional Description
Based on an ITU standard frame, FADS-8XXTR(8 Video, 1 Audio & 2 Data) series are significantly designed for
fiber optic seamless transmission over long distances. Following the Optic-in & Coaxial-out trend, the fiber optic
transmission in CCTV surveillance system can provide wide bandwidth advantage for video and map eight videos,
eight audios and eight data into one fiber.
Naturally FADS-8XXTR series are fully capable of dual way transmissionsfor the video, audio and data, the most formal
CCTV surveillance application is transmitting one way eight videos from the R to T site, one way two RS422/485 data from
the reverse direction T to R to control the camera focusing character and dual way transmissions of one audio.
The transmitter of FADS-8XXTR (camera side) converts eight videos, one audios and two RS422/485 data into digital
signals and maps into a standard format frame over a single fiber link to the receiver FADS-8XXT (monitor side) then returns
the light into electrical analog video, audio and data signals.
Technical Specifications
Video signal specifications
Protocol:
Video bandwidth:
Bit error rate:
Video output voltage:
Video resolution:
DG:
DP:
SNR:
PAL, NTSC
8M Hz
<10-9
1 V P-P 75 Ω
8 Bit
<1.0%
<1.0°
>56 dB
Audio signal specifications
I/O Level:
Sampling frequency:
Audio resolution:
SNR:
typ.0 dBm
52.3K Hz
24 Bit
>70 dB
Data signal specifications
Signal:
Protocol:
Transmission speed:
Transmission Distance:
RS485, RS422 (optional)
Half-duplex (two wires)
115,200 bps
0~1200 m
Product
Dimensions:
Weight:
Power:
LED indicators:
Capacity 190 × 155 ×48 mm (L×W×H)
1.7 Kg
12DC, 2A
Power, Optic, Video, Audio, Data
8 Video, 1 Audio, 2 Data
Connectors and cables
Video:
Data / Voice:
Fiber connectors:
Single mode fiber:
BNC
Pluggable jet
SC, ST, FC
9/125 μm
Environment
Operating temperature: -20˚C~70˚C
0~95% (Non-condensing)
Humidity:
Regulatory approval:
FCC, CE
Optical specification
Fiber type:
Single mode
Distance:
20 / 40 / 80 km
1310nm / 1550nm (DFB)
Wavelength:
Minimal transmitted power: -15 / -5 / 0 dBm
Sensitivity:
-24 / -28 / -34 dBm
* Specification subject to change without notice.
Fiber Optic
Fiber Optic Patchcord
Features
• Available for 0.9mm, 2.4mm 3.0mm cable or specify
• PC, UPC, APC polishes options
• FC, SC, ST, LC, MU,MT-RJ connectors
• Single mode & Multimode Applications
•
•
•
•
Simplex and Duplex available
Low Insertion Loss
High Return Loss
High Repeatability and Stability
Specification
Model Connector type
Wavelength
PC
UPC
APC
SC/PC-SC/PC
Insertions Loss(dB)
Return Loss (dB)
MMF: 850/1300nm SMF: 1310/ 1550/1625nm
≤ 0.3 FOR (SM) ≤ 0.5 FOR (MM)
≥45
≤ 0.3 FOR (SM) ≤ 0.5 FOR (MM)
≥50
≤ 0.3 FOR (SM) ≤ 0.5 FOR (MM)
≥60
Model Connector type
Wavelength
PC
UPC
APC
FC/PC-FC/PC
Insertions Loss(dB)
Return Loss (dB)
MMF: 850/1300nm SMF: 1310/ 1550/1625nm
≤ 0.3 FOR (SM) ≤ 0.5 FOR (MM)
≥45
≤ 0.3 FOR (SM) ≤ 0.5 FOR (MM)
≥50
≤ 0.3 FOR (SM) ≤ 0.5 FOR (MM)
≥60
Model Connector type
Wavelength
PC
UPC
APC
SC/APC-SC/APC
Insertions Loss(dB)
Return Loss (dB)
MMF: 850/1300nm SMF: 1310/ 1550/1625nm
≤ 0.3 FOR (SM) ≤ 0.5 FOR (MM)
≥45
≤ 0.3 FOR (SM) ≤ 0.5 FOR (MM)
≥50
≤ 0.3 FOR (SM) ≤ 0.5 FOR (MM)
≥60
Model Connector type
Wavelength
PC
UPC
APC
ST/PC-ST/PC
Insertions Loss(dB)
Return Loss (dB)
MMF: 850/1300nm SMF: 1310/ 1550/1625nm
≤ 0.3 FOR (SM) ≤ 0.5 FOR (MM)
≥45
≤ 0.3 FOR (SM) ≤ 0.5 FOR (MM)
≥50
≤ 0.3 FOR (SM) ≤ 0.5 FOR (MM)
≥60
Model Connector type
Wavelength
PC
UPC
APC
FC/APC-FC/APC
Insertions Loss(dB)
Return Loss (dB)
MMF: 850/1300nm SMF: 1310/ 1550/1625nm
≤ 0.3 FOR (SM) ≤ 0.5 FOR (MM)
≥45
≤ 0.3 FOR (SM) ≤ 0.5 FOR (MM)
≥50
≤ 0.3 FOR (SM) ≤ 0.5 FOR (MM)
≥60
Model Connector type
Wavelength
PC
UPC
APC
LC/APC-LC/APC
Insertions Loss(dB)
Return Loss (dB)
MMF: 850/1300nm SMF: 1310/ 1550/1625nm
≤ 0.3 FOR (SM) ≤ 0.5 FOR (MM)
≥45
≤ 0.3 FOR (SM) ≤ 0.5 FOR (MM)
≥50
≤ 0.3 FOR (SM) ≤ 0.5 FOR (MM)
≥60
Fiber Optic
* Specification subject to change without notice.
PATCH PANEL
Features
Applications
• Easy Installation & Maintenance
• Wide Area Network
• Single Mode & Multimode Applications
• Telecommunication System
• Low Insertion Loss ( ≤ 0.3dB)
• Testing instrument
• FC/SC/ST/LC Hybrid Adapter for Option
• Local Area Network
• Excellent Repeatability
• Customer specified design available
FP-112W
Wall-Mount : up to 24 ports / Dimension : 76mm x 300mm x 300mm
FP-112U
3" : up to 24 ports / Dimension : 300mm x 482mm(19") x 76mm
* Specification subject to change without notice.
Fiber Optic
PATCH PANEL
FP-418U
4U : up to 48 ports / Dimension : 300mm x 482mm(19") x 170mm
FP-7102U
7U : up to 102 ports / Dimension : 300mm x 482mm(19") x 300mm
Fiber Optic
10
* Specification subject to change without notice.
Fiber Ring Data Modem
MR-FM1
Features
• Based on fiber optic transmission standard
SONET / SDH the mapping and ring-protection
technology
• Mapping Ethernet packets and serial RS232/422/485 data
into individual VC (Virtual Container) of the STM-1
standard frame
• SNCP (Sub-Network Connection Protection) under 50ms at the
node number less 32
• Providing multiple groups communication of each serial RS
master/slavers group
• Single mode optical fiber transmission up to 40 Km
• Low crosstalk interference, cross modulation interference and
low error rate
• MTBF > 10,000 hours
Specifications
Optic
Transmitter power (Single mode) -8 ~ -15 dBm
Receiver sensitive (Single mode) -34 dBm
Transceiver wavelength
1310nm / 1550nm (Option)
Fiber optic connectors
ST, FC, SC, LC
Electric
RS485/RS422/RS232 interface
DB9
10/100Mbps Ethernet
RJ45
Diagnostic
Line loop back / Diagnostic loop back
Functions and Performance
Bit Error Rate
BER < 10-9
Dry Contact
On/Off
Visual Indicators
System alarm
Power / Local / Remote Alarm / LLPK / DLPK
Channel alarm
Data1 / Data2 / Packet
Optical alarm
EOP / WOP
Voltage
Work voltage
5VDC /2A
Input voltage
24VDC/0.42A, (48VDC/220VACOption)
Temperature
Work temperature
-10°C ~ +65°C
Storage temperature
-40°C ~ +85°C
Humidity
95% non-condensing
Dimension
Length/Width/Height
140(H)x40(W)x120(D) mm
Weight
0.9 Kg
* Specification subject to change without notice.
11
Fiber Optic
Ethernet Optic Modem
MR-45J
Features
• Fiber Optic Ring Self-heals within 50ms
• All Digital Design
•
•
•
•
•
•
•
RS-232, RS-422, RS-485 (2/4-wire)
Asynchronous Data Rates up to 115.2 Kbps
Separate Broadcast & Respond Channels
Multimode & Single Mode (850/1300/1310/1550nm)
Optical Local Loop & Diagnostic Loop Test
Protocol Transparent: ModBus, DNP3, Telegyr, etc...
Local Dry Contact Alarm Relay
Specifications
Optical
Transmitter
LED/ELED/LASER
Receiver s
PIN Diode
Wavelength
1310nm / 1550nm SM
850nm/1300nm MM
Electrical
Connector
RJ-45 Female
Interface 10/100 M bits/sec Ethernet
Diagnostic
Optical Line & Diagnostic loop back
Signal generator, disable alarm, enable anti-streaming
Functions and Performance
Dry Contac
Normal open
Fiber Optic Connectors (ST, Optional FC)
Loss Budget
850/1300/1310/1550 nm
Multimode
@62.5/125 15dB
Single Mode
@9/125 15dB
Visual Indicators
System alarm
PWR/ Local Alarm / Remote Alarm EQP, LLPK IND, DLPK IND
Electrical Signal
RJ-45 CH1, RJ-45 CH2
Optic Signal
WLOS ALM, ELOS ALM
Voltage
Work voltage
5VDC /2A
Optional
12VDC, 24VDC, -48VDC or 115/230VAC W/ power cube
Temperature
Work temperature
-10°C ~ +60°C
Storage temperature
-20°C ~ +70°C
Humidity
95% non-condensing
Dimension
Fiber Optic
Length/Width/Height
46(H)x255(W)x140(D) mm
Weight
0.7 Kg
12
* Specification subject to change without notice.
Serial Optic Modem
MR-232
Features
• Fiber Optic Ring Self-heals within 50ms
• All Digital Design
•
•
•
•
•
•
•
RS-232, RS-422, RS-485 (2/4-wire)
Asynchronous Data Rates up to 115.2 Kbps
Separate Broadcast & Respond Channels
Multimode & Single Mode (850/1300/1310/1550nm)
Optical Local Loop & Diagnostic Loop Test
Protocol Transparent: ModBus, DNP3, Telegyr, etc...
Local Dry Contact Alarm Relay
Specifications
Optical
Transmitter
LED/ELED/LASER
Receiver s
PIN Diode
Wavelength
1310nm / 1550nm SM
850nm/1300nm MM
Electrical
Connector
DB-9, DB-25 Female
Interface
RS-232, RS-422 or RS-485 (2 or 4 wire)
Diagnostic
Optical Line & Diagnostic loop back
Signal generator, disable alarm, enable anti-streaming
Functions and Performance
Dry Contac
Normal open
Fiber Optic Connectors (ST, Optional FC)
Loss Budget
850/1300/1310/1550 nm
Multimode
@62.5/125 15dB
Single Mode
@9/125 15dB
Visual Indicators
System alarm
PWR/ Local Alarm / Remote Alarm EQP, LLPK IND, DLPK IND
Electrical Signal
RS232 CH1, RS232 CH2, RS485 CH1, RSD485 CH2
Optic Signal
WLOS ALM, ELOS ALM
Optical alarm
EOP / WOP
Voltage
Work voltage
5VDC /2A
Optional
12VDC, 24VDC, -48VDC or 115/230VAC W/ power cube
Temperature
Work temperature
-10°C ~ +60°C
Storage temperature
-20°C ~ +70°C
Humidity
95% non-condensing
Dimension
Length/Width/Height
140(H)x165(W)x145(D) mm
Weight
0.55 Kg
* Specification subject to change without notice.
13
Fiber Optic
Video Balun With Flip-Top IDC Connector
ST-B295
Features
• Allow maximum distance of color video up to 2200 ft (671m) of cat. 5 UTP cable
• Easy and fast installation
•
•
•
•
•
Include surge protection
Converts Bi-directional signal
Compact enclosure
Support NTSC, PAL and SECAM system
Limited lifetime warranty
System Specification
Fiber Optic
Environment TV(CCTV) equipment for security and surveillance
Bandwidth
Video: DC to 8MHz
Maximum Input 1.1 Vp-p
Impedance Input: 75 ohm (BNC) ; Output: 100 ohms (Toolless Connector)
Insertion Loss <1 dB, Frequency range from DC to 8 MHz
Return Loss -20dB, Frequency range from DC to 8 MHz
Common Mode Rejection -50dB, Frequency range from DC to 8 MHz
Max. Distance Color Cat. 3-1200 ft (365m); cat5 -2200 ft(671m)
Max. Distance B/W
Cat. 3-1500 ft (457m); cat5 -2500 ft(762m)
Cable BNC
Impedance:75 ohms at 1 MHz (RG59/U)
Maximum 25 ft coax allowed per end to end link
Cable-UTP 24 gauge or lower solid copper twisted pair wire
Impedance;100 ohms at 1MHz
Maximum capacitance: 20 pf / foot
Attenuation: 6.6 dB/1000 ft at 1 MHz
Temperature Operating 0˚C to 55˚C
Storage: -20˚Cto 85˚C
Humidity Up to 95% non condensing
Connectors Input : (BNC) female ; output : toolless connector
Enclosure Fire retardant plastic: UL 94V-0
Dimension 54.6mm(L)×17mm(W)×14.6mm(H)
14
* Specification subject to change without notice.
IP Cabling Transmission
IP POWER 9258
IP POWER 9258 FAMILY
Not only does this unit control the power on/off for lights /lamps /servers/routers/network
equipment/industrial machinery, but the IP power 9258 can also remote reboot Ethernet
connected PCs(Wake or LAN) which help enterprises and servers save time, money, and
manpower
As the amount of servers and network gear in remote locations increases, this unit allows you
to manage the power of each device in a convenient way and has the flexibility now required
by network management and industrial security and system integration experts
• 4 power & 4 dimmer control
• Dimmer function – can control the light illumination for 16 varied levels
• Network server reboot – can remote control to reboot the power on for the PC or server at remote site, no need send
someone to get the job done at the scene to save time and manpower
• Network AC power control – can control and operate the high power switch on/off via Internet/Ethernet, even the consumer
electronic 110V/220V products
• Timer power switch – can preset the time schedule to turn power on/ off thru internet / Ethernet
• Open code customization – provided source code for user to modify to fit it’s own system application
• SDK – provided webpage (http.) command-allows end user easily to modify into its own webpage to command VB/VC
firmware always update and can be updated internet
9258 SF
9258 SG
(For France Outlet)
(For German Outlet)
9258 SA
9258 SU
(For Australia Outlet)
(For UK Outlet)
* Specification subject to change without notice.
15
IP Cabling Transmission
SP Series: For Fixed CCD Camera
SP-210/220
Sending video, audio signals and camera DC power - for one camera
• Transmission distance: 500 Meters.
SP-210 Sender-V
SP-220 Viewer
SP-280
Sending Video, Audio and Alarm Signals and DC Power - for one camera
• Transmission distance: 1,000 Meters
SP-280-L Viewer
SP-280-R Sender
SP-250
Sending 2 Video, 2 Alarm Signals and DC Power - for two cameras
• Transmission distance: 600~ 800 Meters
SP-250-L Viewer
SP-250-R Sender
SP-251
Sending 2 Video, 2 Audio, 2 Alarm Signals and DC Power - for two cameras
• Transmission distance: 600~ 800 Meters
SP-251-L Viewer
Twisted Pair Transmission
16
SP-251-R Sender
* Specification subject to change without notice.
SP Series: For PTZ / Dome Camera
SP-270(DC12V)
Sending Video, Audio and Functional Alarm signal, RS485 data and Camera DC Power
• Transmission distance: 600 Meters (sending camera DC power) ;
1,000 Meters (without sending camera DC power)
SP-270-L Viewer
SP-270-R Sender
SP-273(DC12V)
Sending Video signal, RS485 data and Camera DC Power
• Transmission distance: 600 Meters via RG-6/U (bare copper available)
5C-2V (Japan spec) coaxial cable (sending camera DC power)
; 1,000 Meters (without sending camera DC power)
SP-273-L Viewer
SP-273-R Sender
Please be informed SP-250 series and SP-270 series have DC 24V version.
5C-2V, RG-6/U coaxial cable or other equivalents are recommended for standard cable distance.
* Specification subject to change without notice.
17
Twisted Pair Transmission
IP Cabling Transmission
TCP01
IP Extender over Coax
• Send IP camera signal over existing coaxial cable.
• Passive, no power required.
• Exceeds 802.3 10BaseT NEXT specification, isolating the receiver from the transmitted signal.
• Transmission up to 200 meters (Max.)
IP Camera
or
Video Server
TCP01
RG59 Coax Cable 200M(Max)
TCP01
Computer
TCP02
Active IP Extender over Coax
• Extend IP camera signal over Coaxial cable.
• Active type, including transmitter and receiver.
• Long range transmission up to 1800 meters (Max.)
Coax 1.8KM(Max)
IP Camera
or
Video Server
TCP02
TCP02
Computer
TCP03
Active IP Extender over CAT5
• Identical to TCP02, but over CAT5 cable instead of coaxial cable.
• Long range transmission up to 1200 meters (Max.)
CAT5 1.2KM(Max)
IP Camera
or
Video Server
IP Cabling Transmission
TCP03
TCP03
18
Computer
* Specification subject to change without notice.
HDMI CAT5 Extender
HE01
HDMI CAT5 Extender - 2 input 2 Output
• Extends HDMI signal over two CAT5E/6 cables.
• Transmission range up to 50 meters at hi resolution 1080p.
• Including 1 x transmitter HE01T, 1 x receiver HE01R and 2 x 5V power adapters.
• 2 set HDMI inputs at transmitter, application could be 2 in 2 out
when using additional CAT5 receiver HE01R.
• Built in equalization and signal boost function.
• Hi quality digital video and audio over CAT5 without any signal loss.
• Support DDC, EDID and hot plug detection.
• HDMI 1.3 compliant.
• HDCP 1.1 compliant.
• HDMI CAT5 Receiver Option Model : HE01R
HE01R
HE01T
HE01R
HE01R
HD02
HE01T
HE01R
HE01E
HDMI CAT5 Extender – 1 input 1 output
• Extends HDMI signal over two CAT5/5e/6 cables.
• Transmission range up to 30 meters at 1080p resolution.
• Including local and remote unit, 1 x 5V external
power supply.
• Single power supply used at remote unit.
• Hi quality digital video and audio over
CAT5 without any signal loss.
• HDMI compliant.
• HDCP compliant.
HE01S
HDMI CAT5 Extender – Single CAT5 cable
• Extends HDMI signal over one CAT5/5e/6 cables.
• HDMI 1.2 compliant.
• Transmission range up to 40 meters
at 1080p resolution.
• Minimize the cable skew by adjustable
equalization with 8 levels.
• HDCP compliant.
* Specification subject to change without notice.
19
HDMI CAT5 Extender
Twisted Pair Transmission
Passive Series
Twisted pair transmission products are designed for CCTV signal transmission over unshielded
twisted pair wire (CAT5 network cable). These smart cabling system transmission are an
alternative solution to coaxial and fiber based systems, providing following benefits:
• Fast, easy installation, saving time and money.
• Substantial savings on the cost of the cable itself.
• Superb quality on long range transmission.
Passive Video Transceiver (no power required), transmission range color 400 meters, B/W 600
meters via CAT5 UTP Cable.
SP-111V
Video Transceiver BNC Male To RJ-45 Female
• BNC male to RJ45 female.
SP-111VT
Video Transceiver BNC Male To Terminal Block
• BNC male to 2 pin terminal block.
SP-111VTS
Video Transceiver BNC Male To Terminal Block
• Identical to SP-111VT, but built in surge protection.
SP-111VCT
Video Transceiver With 18cm Retractile Cord
• BNC male to screw terminals with 18cm Retractile Cord.
• Weatherproof IP65.
• Perfect for camera with pan-tilt turning device.
SP-111VCT
SP-111VL
Video Transceiver With 25cm Mini Coax Cable
• BNC male to terminal block.
• Weatherproof IP65.
• Compact size and pigtail could be mounted multi units behind
multiplexer, quad, DVR.
SP-111VL
SP-111VT
Twisted Pair Transmission
20
* Specification subject to change without notice.