Casall EB200
Bike
91001
Important: Please locate your serial number and record in the box below for service support
purposes.
Serial number here:
EB200
No:J-6 Spring Washer
NO:J-1 Aorra Nut for M8 Bolt(4)
φ 7*2t(2)
No:J-4 Allen Bolt
M7*P1.0*30L (1)
No:J-8 C-shape knob M7*55L(1)
No:J-4 C-shape knob M7*65L(1)
No:J
Metal cover (1)
No:J-5 Regular Washer
φ 7*1t(2)
Screwdriver (1)
NO:J-2 Carriage Bolt M8*1.25*55L(4)
(Pedal Wrench)
Socket Wrench(1)
Allen Key(1)
No:J-3 Curved Flat
φ 8xφ19x2t
(MM)
Assembly Diagram
EXPLODED DIAGRAM
EB200
No:J-6 Spring Washer
? 7*2t(2)
N O:J-1 Aorra Nut for M8 Bolt(4)
No:J-4 Allen Bolt
M7*P1.0*30L (1)
No:J-8 C-shape knob M7*65L(1)
No:J
Metal cover (1)
No:J-5 Regular Washer
? 7*1t(2)
No:J-7 Bushing φ12*40L (1)
Screwdriver (1)
N O:J-2 Carriage Bolt M8*1.25*55L(4)
(Pedal Wrench)
Socket Wrench(1)
Allen Key(1)
No:J-3 Curved Flat ? 8* ? 19*2t(4)
PARTS LIST
NO.
A-1,A-2
Description
Specifications
Q'TY
COMPUTER & SCREW
1PC
HANDLEBAR
1PC
B-1
HAND PULSE SET
1SET
B-2
FOAM GRIP
B-3
CAP FOR HANDBLEBAR
B-4
HAND PULSE WIRE
C
HANDLEBAR POST
1PC
C-1
COMPUTER CABLE (UPPER)
1PC
C-2
BOTTLE HOLDER
1PC
C-3
SCREW FOR R/L COVER
C-4
REAR COVER FOR COMPUTER
1PC
C-5
FRONT COVER FOR COMPUTER
1PC
C-6
SCREW FOR BOTTLE HOLDER
B
D
480xφ20x5.0m/m
1SET
1SET
550+550mm
M5xP0.8x14L
M5xP0.8x20L
MAIN FRAME
1PC
2PCS
2PCS
1PC
D-2
ALLEN BOLT FOR HAND POST
M8*P1.25*16L(6m/m)
4PCS
D-3
SEMICIRCLE WASHER
φ8xφ19x2t
4PCS
D-4
ADJUSTING KNOB FOR MAIN FRAME
D-5
BELT J6 1016m/m
D-6
BIG PULLEY
1PC
D-7
SHAFT
1PC
D-8
SCREW
M8xP1.25x12Lx5t
3PCS
D-9
FLAT WASHER
φ17.5xφ25x0.3t
2PCS
D-10
WAVE WASHER
φ17.5xφ25x0.3t
1PC
D-11
C-TYPE RING
φ17
1PC
D-12
BEARING
6203 (RS)
D-13
PLASTIC BUSHING
1PC
D-14
SENSOR BOX
1PC
D-15
SCREW FOR SENSOR BOX
M4x10L
D-16
SCREW FOR CHAIN COVER
3/16〃
10PCS
D-17
SCREW FOR CHAIN COVER
M4x50L
4PCS
D-18
CHAIN COVER (L)
1PC
D-19
CHAIN COVER ( R)
1PC
D-20
CROSS DISC (R )
1PC
D-21
ROUND DISC
D-22
NUT FOR DISC
D-23
CAP FOR ROUND DISC
D-24
SCREW FOR CROSS DISC
M4x14L
8PCS
D-25
FLAT WASHER
φ15xφ16x1t
8PCS
1PC
J6 1016m/m
1PC
2PCS
1PC
2PCS
M10xP1.25x10T
2PCS
2PCS
D-26
CROSS DISC (L)
1PC
E~E-12
FLYWHEEL SET
1SET
F-F
FRONT STABILIZER SET
1SET
F-B
REAR STABILIZER SET
1SET
SEAT POST SET
1SET
SEAT SLIDER
1SET
SEAT
1PC
H-RL
PEDAL
1SET
I~I-9
IDLER WHEEL SET
1SET
J~J-9
BOLTS & NUTS PACK
1SET
ADAPTOR
1PC
G
G-1~G-5
G-6
L
M~M-13,D-1 GEAR BOX AND MAGNETIC SET
1PC
Step 1
1
Foot Tube Assembly
Attach the Front Stabilizer (pt.F-F)
to the Main Frame (pt.D) using
two M8xP1.25x55L carriage bolts
(pt.J-2),Flat washer (pt.J-3) and
nuts (pt.J-1).
Attach the Rear Stabilizer (pt.F-B)
to the Main Frame (pt.D) using
two M8xP1.25x55L carriage bolts
(pt.J-2),Flat washer (pt.J-3) and
nuts (pt.J-1).
4*
Step 2
2
Pedal Assembly
1. Assemble the two Pedals (pt.H-R+L)
onto the Cross disc (pt.D-20 + D-26)
with a screw driver.
R
L
Remarks: Screw the left pedal’s spindle
counter-clockwise and the right pedal’s
spindle clockwise. Use a wrench (or
screwdriver) to screw the two spindles
completely.
Step 3 --Seat Tube Assembly
1. Please remove the adjusting knob (pt.D-4) from the main frame (pt.D).
2. Assemble the seat (pt.G-6) to the Slider. The slider can be adjusted in different angles. Tighten
the two Nuts under the Seat using a screwdriver. In addition, the Slider can be adjusted in
horizontal level by loosing the knob.
2. Insert the seat post (pt.G) into the main frame (pt.D), then choose the desired position and
tighten the adjusting knob (pt.D-4). Be sure the knob is always tightened.
Remarks: When you have chosen a desired position, tighten the Seat Post Knob until you hear a
“click”.
3
M16
Step 4-Handlebar post Assembly
1. Please remove the M8*16L Allen bolt (pt.D-2) and Semicircle washers (pt.D-3) from the main
frame (pt.D)
2. Hold the Handlebar post (pt.C) and connect the Lower computer cable (pt.D-1) to the Upper
computer cable (pt. C-1)
3. Slide the Handlebar Post (pt.C) into the Main frame then fix it with four sets of M8*P1.25*16L
Allen screws (pt.D-2) and Semicircle washers (pt.D-3)..
Remarks: Do not screw one set of the M8*16L Allen Screws and Semicircle washers too firm at one
time. It is better to fix the four sets firmly at the same time because it helps you to change angles
and to fix easily.
4
4*
Step 5- Computer and Bottle holder Assembly
1. Connect the Computer cables (pt .C-1) to the Computer (pt.A). Then attach the Computer (pt .A)
to the Computer bracket with the enclosed Screws (pt. A-1).
2. Remove the pre-installed Screws (pt.C-6) on the handlebar post first, and then assemble the
Bottle holder (pt.C-2) using screw (pt. C-6).
5
Step 6- Handlebar Assembly
1. Attach the Handlebar (pt.B) to the Handlebar post (pt.C) using the Metal cover (pt.J). Fix firmly
with one Flat washer (pt.J-5), one Spring washer (pt.J-6) and one Fixing bolt (pt.J-4).
2. Attach the Rear cover (pt.C-4) to the Handlebar post (pt.C) using two of M3x14L Screws (pt.J-9)
and one of M5xP0.8x14L Screws (pt.C-3) .
3. Attach the Front cover (pt.C-5) to the Handlebar post (pt.C) using M5x14L Screws (pt.C-3) the
Handlebar T-Knob (pt.J-8) using one set of Flat washer (pt.J-5), Spring washer (pt.J-6) and one
Bushing (pt.J-7).
4. Connect as the Hand pulse wire (pt.B-4) to the computer (pt.A).
7*2T
φ12*40L
M7*55L
7*1T
Step 7Connect the adaptor (L) to the DC hole (located on the back of the chain cover).
INSTRUCTIONAL MANUAL FOR
CASALL EB200 CONSOLE
DISPLAY FUNCTIONS :
ITEM
TIME
DESCRIPTION
.Workout time displayed during exercise.
.Range 0:00 ~ 99:59
SPEED
.Workout speed displayed during exercise.
.Range 0.0 ~ 99.9 KM/Hour
DISTANCE
.Workout distance displayed during exercise.
.Range 0.00 ~ 99.90 KM
CALORIES
.Burned calories during workout display.
.Range 0 ~ 990 Cals
* Calorie count on the display only serves as a general guideline. For detail calorie
consumption for each individual please consult a physician or a nutritionist.
PULSE
.Pulse bpm displayed during exercise.
.Pulse alarm when over preset target pulse.
RPM
.Rotation (of flywheel) per minute
.Range 0 ~ 999
*RPM may fluctuate up and down when workout intensity changes.
WATT
.Workout power consumption
.Watt program is under Manual mode.
User may preset watt value in Manual mode.
. Please note, if watt is preset in Manual mode, resistance level shall adjust
automatically according to workout power consumption.
. Setting range 0~350
MANUAL
.Manual mode workout.
PROGRAM
.12 PROGRAM selection.
USER
.User creates resistance level profile.
Target HR
.Target HR training mode.
KEY FUNCTION:
ITEM
UP
DOWN
DESCRIPTION
‧ Increase resistance level
‧ Setting selection.
‧ Decrease resistance level
‧ Setting selection.
MODE
‧ Confirm setting or selection.
RESET
‧ Hold on pressing for 2 seconds, computer will reboot and start from user setting.
‧ Reverse to main menu during presetting workout value or stop mode.
START/ STOP ‧ Start or Stop workout.
RECOVERY
‧ Test heart rate recovery status.
OPERATION:
POWER ON
Plug in power supply, computer will power on and display all segments on LCD for 2 seconds.
After 4 minutes without pedaling or pulse input, console will enter into power saving mode.
Press any key may wake the console up.
Manual Mode
Adjust resistance during workout manually.
Press START in main menu may start workout in manual mode.
You can also choose to into Mode function with following steps
1. Press UP or DOWN to select workout program, choose Manual and press MODE to enter.
2. Press UP or DOWN to preset TIME, DISTANCE, CALORIES, PULSE and press MODE to confirm.
3. Press START/STOP keys to start workout. Press UP or DOWN to adjust load level.
4. Press START/STOP keys to pause workout.
Press RESET to reverse to main menu.
Program Mode
Choose a preset workout program.
1.
Press UP or DOWN to select workout program, choose the Program and press MODE to enter.
Program = 12)
2. Press UP or DOWN to preset TIME.
3. Press START/STOP key to start workout. Press UP or DOWN to adjust load level.
4. Press START/STOP key to pause workout. Press RESET to reverse to main menu.
User Program Mode
Preset your own workout profile.
1. Press UP or DOWN to select workout program, choose User and press MODE to enter.
(Total
2.
3.
4.
5.
6.
Press UP or DOWN to set load level of each column, and press MODE to next one.
Hold on pressing MODE to finish or quit setting.
Press UP or DOWN to preset workout TIME.
Press START/STOP key to start workout. Press UP or DOWN to adjust load level.
Press START/STOP key to pause workout. Press RESET to reverse to main menu.
H.R.C. mode
H.R.C. for the workout.
1. Press UP or DOWN to select workout program, choose
H.R.C. and press MODE to enter.
2. Press UP or Down to select 55%.75%.90% or TAG (TARGET H.R.) (default: 100).
3. Press UP or DOWN to preset workout TIME.
4. Press START/STOP key to start or stop workout. Press RESET to reverse to main menu.
Watt program Mode (under Manual mode)
1. Preset UP or DOWN to preset WATT and press MODE to confirm.
2. During workout, resistance level will adjust according to workout power consumption.
User may not press UP or DOWN to change resistance level.
3. Press UP or DOWN to preset TIME.
4. Press START/STOP keys to start workout.
5. Press START/STOP keys to pause workout.
Press RESET to reverse to main menu.
Recovery
Monitor heart rate recovery status.
1. User must be holding the handgrip. When the pulse value is displayed on the computer, press on the
RECOVERY key.
2. TIME shows "0:60" (seconds) and count down.
3. Computer will show F1 to F6 after count down to 0 to test heart rate recovery status.
<Trouble shooting>
When computer act abnormal, please plug out the adaptor and plug in again.