COLDEST LONGEST Specifications 67cm 68cm 87.5cm External Dimensions .5 53 .8 52 125L/ 132Qt 63 54 .5 46 46 46 55cm 105L/ 111Qt 85L/ 90Qt 57 48 43 43 70L/ 74Qt 48.2 60L/ 63Qt 45 45L/ 47Qt 51 35L/ 37Qt 100.5cm 71cm Internal Dimensions 88cm Thickness Model W L H W L H Walls 35L/37Qt 43cm/16.9” 55cm/21.7” 46cm/18.1” 29cm/11.4” 41cm/16.1” 30cm/11.8” 7cm/2.8” 7.6cm/3” 8.5kg/18.7lb 48 45L/47Qt 43cm/16.9” 67cm/26.4” 46cm/18.1” 29cm/11.4” 53.5cm/21.1” 30cm/11.8” 7cm/2.8” 7.6cm/3” 11kg/24.3lb 60 60L/63Qt 48cm/18.9” 68cm/26.8” 51cm/20.1” 34cm/13.4” 7cm/2.8” 7.9cm/3.1” 12kg/26.5lb 72 70L/74Qt 85L/90Qt 46.5cm/18.3” 87.5cm/34.4” 45cm/17.7” 31.5cm/12.4” 54cm/21.3” 71cm/28” 57cm/22.4” 37cm/14.6” 53cm/20.9” 34.5cm/13.6” 88cm/34.6” 63cm/24.8” 38.5cm/15.2” lb/kg Cans 74cm/29.1” 30cm/11.8” 7.4cm/2.9” 7.9cm/3.1” 14kg/30.9lb 82 55cm/21.7” 40cm/15.7” 7.4cm/2.9” 8.1cm/3.2” 15kg/33.1lb 96 7.4cm/2.9” 7.6cm/3” 16kg/35.3lb 120 73.7cm/29” 44.5cm/17.5” 7.4cm/2.9” 9cm/3.5” 19.5kg/43lb 144 105L/111Qt 52.8cm/20.8” 100.5cm/39.6” 48.2cm/19” 38.5cm/15.2” 86.8cm/34.2” 32cm/12.6” 125L/132Qt 53.5cm/21.1” Lid Weight Capacity Absolute No.1 Ice Keeper "Thanks, ordered a 60L/ 63Qt, yours are the best, hands down, period, nothing else rates or compares , hurry up and get them into USA, I think they would be a hit!" Signature Series Keep Ice 8-25 days* 35L-125L / 37Qt-132Qt P Baynard (California) "Thanks, ordered a 60L/ 63Qt, yours are the best, hands down, period, nothing else rates or compares , hurry up and get them into USA, I think they would be a hit!" P Baynard (California) This customer had one sent all the way from Australia to set his hands on one. G L O BAL NAT I O NAL AU S T RAL I A P T Y. LT D. TECHNI-ICE DIVISION - ABN 22 006 310 989 www.techniice.com Telephone: +61 3 97831922 Email: [email protected] Fax: +61 397831677 FDA Approved Signature Series 3 Years Ago Techniice Decided to Design the WORLD’S BEST ICE BOX and engaged a team of Renowned International Industrial Designers coupled with specialists from the Cold Chain solutions industry with expert knowledge in Thermal science. Finally after a 3 year design and development phase this world beating ice box is finally in production. If you have been looking for a cooler which can keep ice longer than high end Polyethylene or fiberglass box and need extreme strength and durability then the 2014 Techniice Signature Series is the answer. Dual seal airlock system with refrigerator gasket seals for a perfect lid seal at all temperature Up to 9cm/ 3.5” thick Lid & 7.4cm/ 2.9” walls injected with high density multi compound PU insulation under high pressure ENE & L Y H T E Y L O RMS P S BY MILES!!! O F R E P T U O OLER O C S S A L G FIBRE Fully integrated anchor points to enable the ice box to be anchored to boat or ute etc 8-25 DAYS ICE RATING* UP TO 9CM/ 3.5” THICK LID & 7.4CM/2.9” WALL DUAL AIR LOCK SEAL SYSTEM FULLY RECESSED DESIGN Pad lockable to secure your food and drinks 2014 New Signature Series Construction Discover why the new 2014 Signature Series cooler by Techniice is already being regarded as best ice keeping cooler size for size in the world. Fully recessed stainless steel latches Even the smallest 35L/ 37Qt model has massive 7cm/ 2.8” walls injected with premium PU multi compound insulation under high pressure. The entire cooler body and lid to produce the ultimate in insulation. The new Techniice Signature Series coolers are also fitted with a new dual seal air lock system, consisting of a thick premium flat seal plus an additional gasket style refrigerator seal which seal onto a corresponding raised lid on the body of the cooler, providing a perfect seal at virtually all ambient temperature. In addition to these design features we have also incorporated wide, solid, elevated skid feet to allow 360o air flow around and under the cooler to prevent rising heat from the ground or the back of a pickup, which would normally compromise ice keeping performance of the cooler. Another unique feature of this cooler is the 5cm/ 2” insulated bung. The Signature Series coolers are so effective at keeping ice that we know you are likely to have a lot of chunks of ice at the end of your trip that you will be able to be empty through this generous sized bung. The bung plug is quite unique in that the actual plug is insulated so as not to compromise the insulation qualities of the cooler.(This is an area most other coolers have neglected.) These new Techniice Signature Series coolers also feature stong quick release axle and wheel sets (on 85L/ 90Qt and 105L/ 111Qt model) and strong anchor points to tie the cooler down in boats and vehicles and also allows for a padlock to keep everything secure. These new coolers tick all the boxes and are produced in an ISO9001 quality certified production plant. Comfortable heavy duty marine grade rope handles 5cm/ 2” insulated bung to allow large chunk of ice to be released at the end of camping trips Solid Elevation suid feet to provide 360o air circulation to prevent radiant heat from ground or pick up trays compromising performance. Heavy duty Fully integrated corrosion resistant hinges Heavy duty quick release corrosion resistant axle & wheels (85L/ 90Qt and 105L/ 111Qt Models) Free Heavy Duty Dairy Basket
© Copyright 2024