Phitomas- Autodesk Training Modules 2015 Autodesk Inventor Cable and Harness Design CERTIFIED TRAINING © Copyright 2015. Phitomas Sdn Bhd. All Rights Reserved. The information in this document is subject to change without notice. No part of this document may be reproduced, stored or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Phitomas Sdn Bhd. Phitomas- Autodesk Training Modules 2015 Autodesk Inventor Cable & Harness Design Certified Training Courseware Description This training teaches the participant in the use of Autodesk Inventor Cable and Harness environment. Through a hands-on, practice-intensive curriculum, students acquire the knowledge needed to design physical cables andharnesses for electrical systems in almost any kind of product or machine. With specific tools to incorporate cable and harness into digital prototypes, the Autodesk Inventor Cable and Harness Design software enables you to calculate accurate path lengths, avoid small-radius bends, and help ensure that electrical components fit into the mechanical assembly before manufacturing. After completing this training, you will be able to: Describe the functionality of Cable and Harness and the basic workflow to add and document cable and harness designs. Wire a harness assembly by adding or importing wires and cables, adding ribbon cables, adding route segments, and routing wires and cables through the segments. Refine a cable and harness design by editing the wires, cables, routes, or cable ribbons; by adding and editing splices; or by adding and editing virtual parts. Communicate your cable and harness to others by creating and annotating 2D drawings and exporting the design data. Create and manage the library file and configuration files. Create, author, and publish electrical parts and connectors to a custom Content Center library. Duration 2 Days Who Should Attend Experienced Autodesk Inventor User Pre-Requisites Knowledge of Autodesk Inventor basics as taught in Autodesk Inventor Introduction course or have an equivalent understanding of Autodesk Inventor 2015 user interface and working environments Knowledge of Autodesk Inventor Part and Assembly Modeling and drawing view Creation and Annotating is recommended. A working knowledge of your operation system. Course Achievement Autodesk ATC Certification of Completion shall be issued to participants with full attendance record upon training completion. © Copyright 2015. Phitomas Sdn Bhd. All Rights Reserved. The information in this document is subject to change without notice. No part of this document may be reproduced, stored or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Phitomas Sdn Bhd. Phitomas- Autodesk Training Modules 2015 Course Content Chapter 1 Getting Started Creating Cable and Harness Designs Chapter 2 Wire a Harness Assembly Chapter 3 Refine a Cable and Harness Design Chapter 4 Communicate the Design Chapter 5 Configure Library and Report Configuration Files Chapter 6 Create, Author and Publish Electrical Content Note : The Course duration is a guideline. Course topics and duration may be modified by the instructor based on the knowledge and skill level of the course participant. © Copyright 2015. Phitomas Sdn Bhd. All Rights Reserved. The information in this document is subject to change without notice. No part of this document may be reproduced, stored or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Phitomas Sdn Bhd.
© Copyright 2024