3-axis CNC Machinig Centre with profile rotation -90, 0, +90

MODUS
3-axis CNC Machinig Centre with profile rotation -90, 0, +90°. Machining on three sides
A (mm)
B (mm)
C (mm)
4027
1760
2065
Kg
2200
MODUS
3-axis CNC Machinig Centre with profile rotation -90, 0, +90°. Machining on three sides
Technical Specifications
Guard with receding frontal door with pneumatic opening
Console on board LH side machine complete with PC + FOMCAM software
CNC controlled interpolating X, Y, and Z
Axis sliding X,Y,Z on linear guides with high precision
X axis movement with DC motor and high pressure reducer
Y and Z axis movement with DC motors and drive with ground recirculating ball-screw
Pneumatic rotation of the worktable -90° to 0 to +90°
Worktable height 850 mm
Pneumatic vices (n° 4) that translate along the worktable with quick positioning (without use of keys or accessories) (PATENTED)
Dual working pressure with safety valves for profile stop
Vices positioning readout on the workable by CN
Automatic/manual tool change ISO 30 cone with cone tool-holder (6 tools)
Software automatically corrects tool diameter and length
Milling capacity: X=2.985, Y=260, Z=120
Spindle speed: 1000/12000 rpm, 2.2 kW
Microdrop lubrication
Set-up for central greasing for recirculating ball-screws and linear guides
LH and RH profile pneumatic stop
The profile being machined can be greater than the X milling depth (3.000 mm) alternatively using the pneumatic stops on the left and the right of the machine
MODUS
3-axis CNC Machinig Centre with profile rotation -90, 0, +90°. Machining on three sides
Technical Specifications
Air working pressure required 7 bar
Work cycle air consumption 64 Nl
Chip bin
Set up for the installation of fume extraction
Max tool height (spindle end projection) 130 mm
Max tool height 45°-135° and intermediates angles (spindle end projection) 95 mm
MODUS
3-axis CNC Machinig Centre with profile rotation -90, 0, +90°. Machining on three sides
Working Range
0°
0°
Profile maximum size accepted/machinable
on one side with tool (Ø 10mm) working
height 60mm.
0° / +90°
0°
-90° / 0° / +90°
+ 90°
Profile maximum size
accepted/machinable on two sides with
tool (Ø 10mm) working height 60mm
-90°
- 0°
+90°
Profile maximum size accepted/machinable on
two sides with tool (Ø 10mm) working height
60mm.
MODUS
3-axis CNC Machinig Centre with profile rotation -90, 0, +90°. Machining on three sides
Maximum machinable profile with tool
AXES SPECIFICATIONS
ASSE X
ASSE Y
ASSE Z
TRAVEL
mm
3005
305
214
SPEED
m/1’
30
12,5
11
TOOL REPLACEMENT TIME sec. 15
DISTANCE BETWEEN THE PNEUMATIC STOP mm 2960
MODUS
3-axis CNC Machinig Centre with profile rotation -90, 0, +90°. Machining on three sides
FOMCAM SOFTWARE :
It is a CADCAM program, operating in Windows ambient, for the graphic designing of the machining operations to be executed with the CNC..
Technical Specifications :
2D graphic representation in CAD ambient of inserted bars and machining operations
Guided introduction of the main machining operations (hole, pocket, linear milling, cylindrical hole)
Parametric machining management
Simplified management of machining process sequence
Automatic calculation of optimal vice positioning
Tool archive management
Profile and tool archive that can be extended and managed by user
Management of machining prestored in archive (macro)
Module for he graphic designing in 3D ambient (OPTIONAL)
MODUS
3-axis CNC Machinig Centre with profile rotation -90, 0, +90°. Machining on three sides
Technical specifications
Axes travel
X Axis Longitudinal travel
mm 3.005
Y Axis Transversal travel
mm 355
Z Axis Vertical travel
mm 214
Axis movement
Axis
m/1’ 30
Y Axis
m/1’ 12,5
Z Axis
m/1’ 11
Tool replacement time
sec. 15
Distance between the pneumatic stop
mm 2.960
Electrospindle
Cone
Max power
Tool rotation speed
ISO 30 DIN 69871
Kw 2,2 (S6)*
rpm 12.000
* Sequence of identical operating cycles, each cycle comprises an operatine time lapse with constant load and an operating time lapse with no load
Tool magazine
Time calculated from the end of a machining
operation to the start of a new one
Number of tools
sec. 15
n° 6
Maximum tool weight
Kg 2
Maximum tool length
mm 130
Max. tool diameter cylindric (milling cutter)
mm 20
Max. tool diameter disk (milling cutter)
mm 75
MODUS
3-axis CNC Machinig Centre with profile rotation -90, 0, +90°. Machining on three sides
Technical specifications
Dimensions
Length
mm 4.027
Width
mm 1.760
Height
mm 2.065
Weight
Kg 2.200
All specifications refer to the standard version
MODUS
3-axis CNC Machinig Centre with profile rotation -90, 0, +90°. Machining on three sides
Standard Accessories
N
4
Description
Electrospindle regulation by numerical control – inverter
(1000/12000 rpm)
6 position tool magazine. (ISO 30)
Note: No housing of single/double tool angular unit and
blade-holder cone.
Pneumatic vices with manual positioning
LH and RH receding pneumatic stop
Micro-drop lubrication by pure oil
Chip Tray
Perimetric guard with pneumatic vertical door opening
Set up for forced evacuation of fumes collectors
Electronic equipment “Power T”
PC+monitor+Operating System in English language
Software licence for FOMCAM program
MODUS
3-axis CNC Machinig Centre with profile rotation -90, 0, +90°. Machining on three sides
Optionals
Description
Milling bits of various diameter and length
ISO 30 ERG 20 H 50 collet holder
Collet ERG 20 diameters
Cooling system by emulsified oil with coolant recovery
Rotation of the worktable CNC controlled (A axis)
Integral guard system
Kit additional clamp for locking the profile
Additional NC independentely positioned clamps
Additional “FomCam” licence for office
Module for the graphic designing in3D
Bar-code optical reader and software for FOM’s protocol
Bar-code optical reader and software of a non FOM’s protocol
Additional charge for electric cabinet cooling (ver. 350)
Additional charge for special voltage and cycle (Standard motor 230/400V three-phase 50 Hz)
Additional charge for plant version UL-CSA (Additional charge includes motor with special voltage)
MODUS
3-axis CNC Machinig Centre with profile rotation -90, 0, +90°. Machining on three sides
The specifications and illustrations in this technical sheet are only guideline, FomIndustrie therefore reserves the right to make any modifications it deems necessary for technical or commercial
reasons at any time and without prior notification.