1. No category

SCOFIELD® TEXTURETOP® STENCIL GRADE
SCOFIELD® Texturetop® is the superior solution for resurfacing and texturing interior or exterior concrete
surfaces for commercial, industrial, or residential use in new construction or renovation.
SCOFIELD Texturetop is color-matched to the full range of standard and custom colors available and can be
used to restore existing interior concrete floors and exterior hardscapes or to correct construction errors.
Colors:
Available in 24 standard colors - see color chart A-132
Packaging:
Base Unit - 53 pound bag
Color Pack - 2 pounds
Coverage:
One SCOFIELD Texturetop Stencil Grade bag mixed with one Color Pack will cover approximately
50 sq. ft. to a depth of 1/8”
One SCOFIELD Texturetop Stencil Grade 55-pound combination unit will yield approximately
1/2 cubic foot of mixed material
The amount required will vary depending on depth of installation, substrate surface profile and texture,
preparation procedures, specified surface finish and other conditions
Ideal Uses:
Where a stenciled pattern, knockdown finish, broom finish or spray application will be used
Application:
Trowel, spray application with hopper gun at thicknesses from 1/32” to 1/8”
Stencil using water-resistant paper stenciling templates
Texture with shallow profile rollers or mat-type embossing skins
Achieves a compressive strength of 4500 psi in 28 days
Keys to success:
Requires an ICRI surface profile between CSP#2 and CSP#4
Concrete substrate must be free of oils, laitance, curing compounds or other bond-inhibiting materials
All cracks should be repaired and cured prior to application of SCOFIELD Texturetop
Place as soon as possible after mixing
All working joints in the substrate must be reproduced in the topping
Allow material to cure for 2 to 4 hours before removing the stencil
1-800-800-9900
www.scofield.com
SCOFIELD® TEXTURETOP® STENCIL GRADE
Creates hard, abrasion-resistant wear surfaces
Fast setting with rapid strength gain for fast-track installation
Excellent moisture and freeze/thaw resistance
Wide range of attractive integral colors
SCOFIELD Texturetop is also available in Stamp Grade, Trowel & Spray Grade and Stencil Grade
Sealing:
For optimum performance and durability SCOFIELD® Selectseal-W™ is recommended
May also be sealed with SCOFIELD® Cureseal-W™, SCOFIELD® Cureseal-S™, CEMENTONE® Clear Sealer
or COLORCURE® Concrete Sealer
1-800-800-9900
www.scofield.com